Caracterização da remoção de metais pesados na ETAR da Charneca (Óbidos), Águas do Oeste

Este trabalho teve como objectivos a quantificação analítica de quatro metais pesados (chumbo, níquel, crómio e cádmio) nas diferentes etapas da ETAR da Charneca (Óbidos) identificando, através dos coeficientes de partição, os principais mecanismos de remoção dos metais em cada etapa de tratamento. Foram também determinados os parâmetros mais importantes na caracterização de águas residuais (pH, CQO, ST, STV, SS e SSV). Foram realizadas duas campanhas de amostragem, uma primeira com o objectivo de aperfeiçoamento dos planos de amostragem e selecção dos métodos analíticos a adoptar e uma segunda para o cumprimento dos objectivos do trabalho. A determinação de metais pesados foi efectuada por Espectrometria de Absorção Atómica de Chama (FAAS) e Espectrometria de Absorção Atómica de Câmara de Grafite (GFAAS). Os restantes parâmetros analíticos foram determinados pelos métodos de referência (APHA, 1998). No período de amostragem, o afluente à ETAR apresentou concentrações reduzidas dos metais em estudo com valores médios de 11,78 µg/L. De entre os metais destacavam-se, no entanto, o crómio e de níquel, com concentrações respectivamente 27,83 µg/L e 17,50 µg/L. As amostras de areias, extraídas na obra de entrada, apresentaram concentrações mais significativas de chumbo e crómio, enquanto as amostras de gorduras, recolhidas no mesmo ponto, apresentaram concentrações mais elevadas de níquel e crómio. As amostras do efluente final revelaram concentrações muito reduzidas dos quatro metais estudados com a concentração média a situar-se nos 7,34 µg/L. Verificou-se uma remoção na fase líquida do efluente de cerca de 85% para o chumbo, 39% para o níquel e 34% para o crómio. No cádmio não se verificou remoção na fase líquida. Concluiu-se que a remoção dos metais é determinada por uma transferência destes para a fase sólida e que ocorre fundamentalmente no reactor biológico onde uma parte significativa dos metais pesados é absorvida pela biomassa presente. Nas lamas desidratadas, os metais encontrados em maior concentração foram o chumbo e o crómio com concentrações de respectivamente 130,64 mg/Kgmat.seca e 87,99 mg/Kg mat.seca, embora todos os metais pesados estudados apresentem uma situação de conformidade com os requisitos de lamas para valorização agrícola, estabelecidos na legislação nacional.

Caracterização de regiões encefálicas no cérebro normal por tensor de difusão e aplicação à epilepsia pós-traumática

Mestrado em Radiações Aplicadas às Tecnologias da Saúde.

Perspectives on the electrically induced properties of electrospun cellulose/liquid crystal devices

A mat of electrospun cellulose fibers are deposed on transparent conductive oxide covered glass, and two such plates enclose a nematic liquid crystal. Thus two new types of Cellulose based Polymer Dispersed Liquid Crystal devices, based on hydroxypropylcellulose and Cellulose Acetate and the nematic liquid crystal E7 have been obtained. The current-voltage characteristics indicates ionic type conduction. Heating-cooling cycles have been applied on the samples and the activation energies have been determined. Simultaneously with the thermo-stimulated currents, the optical transmission dependence on the d.c. electric field and temperature was registered. ON-OFF switching times have been determined for different control voltages. (C) 2011 Elsevier B.V. All rights reserved.

Surgical proven location of the facial nerve in the vicinity of cerebellopontine angle tumours depicted pre-operatively by tractography

Purpose/Introduction: To determine the clinical utility of pre-operative diffusion tensor (DT) tractography of the facial nerve in the vicinity of cerebellopontine angle (CPA) tumours. The location of the facial nerve was established pre-operatively by tractography and compared with in-vivo electrode stimulation during microsurgery of vestibular schwannomas and rare CPA masses (meningiomas and arachnoid cysts).

Dynamical analysis in growth models: Blumberg’s equation

We present a new dynamical approach to the Blumberg's equation, a family of unimodal maps. These maps are proportional to Beta(p, q) probability densities functions. Using the symmetry of the Beta(p, q) distribution and symbolic dynamics techniques, a new concept of mirror symmetry is defined for this family of maps. The kneading theory is used to analyze the effect of such symmetry in the presented models. The main result proves that two mirror symmetric unimodal maps have the same topological entropy. Different population dynamics regimes are identified, when the intrinsic growth rate is modified: extinctions, stabilities, bifurcations, chaos and Allee effect. To illustrate our results, we present a numerical analysis, where are demonstrated: monotonicity of the topological entropy with the variation of the intrinsic growth rate, existence of isentropic sets in the parameters space and mirror symmetry.

An Extension of Gompertzian Growth Dynamics Weibull and Frechet Models

In this work a new probabilistic and dynamical approach to an extension of the Gompertz law is proposed. A generalized family of probability density functions, designated by Beta* (p, q), which is proportional to the right hand side of the Tsoularis-Wallace model, is studied. In particular, for p = 2, the investigation is extended to the extreme value models of Weibull and Frechet type. These models, described by differential equations, are proportional to the hyper-Gompertz growth model. It is proved that the Beta* (2, q) densities are a power of betas mixture, and that its dynamics are determined by a non-linear coupling of probabilities. The dynamical analysis is performed using techniques of symbolic dynamics and the system complexity is measured using topological entropy. Generally, the natural history of a malignant tumour is reflected through bifurcation diagrams, in which are identified regions of regression, stability, bifurcation, chaos and terminus.

Development of an injectable grout for concrete repair and strengthening

This paper deals with the coupled effect of temperature and silica fume addition on rheological, mechanical behaviour and porosity of grouts based on CEMI 42.5R, proportioned with a polycarboxylate-based high range water reducer. Preliminary tests were conducted to focus on the grout best able to fill a fibrous network since the goal of this study was to develop an optimized grout able to be injected in a mat of steel fibers for concrete strengthening. The grout composition was developed based on criteria for fresh state and hardened state properties. For a CEMI 42.5R based grout different high range water reducer dosages (0%, 0.2%, 0.4%, 0.5%, 0.7%) and silica fume (SF) dosages (0%, 2%, 4%) were tested (as replacement of cement by mass). Rheological measurements were used to investigate the effect of polycarboxylates (PCEs) and SF dosage on grout properties, particularly its workability loss, as the mix was to be injected in a matrix of steel fibers for concrete jacketing. The workability behaviour was characterized by the rheological parameters yield stress and plastic viscosity (for different grout temperatures and resting times), as well as the procedures of mini slump cone and funnel flow time. Then, further development focused only on the best grout compositions. The cement substitution by 2% of SF exhibited the best overall behaviour and was considered as the most promising compared to the others compositions tested. Concerning the fresh state analysis, a significant workability loss was detected if grout temperature increased above 35 degrees C. Below this temperature the grout presented a self-levelling behaviour and a life time equal to 45 min. In the hardened state, silica fumes increased not only the grout's porosity but also the grout's compressive strength at later ages, since the pozzolanic contribution to the compressive strength does not occur until 28 d and beyond. (C) 2012 Elsevier Ltd. All rights reserved.

Strong and weak Allee effects and chaotic dynamics in Richards' growths

In this paper we define and investigate generalized Richards' growth models with strong and weak Allee effects and no Allee effect. We prove the transition from strong Allee effect to no Allee effect, passing through the weak Allee effect, depending on the implicit conditions, which involve the several parameters considered in the models. New classes of functions describing the existence or not of Allee effect are introduced, a new dynamical approach to Richards' populational growth equation is established. These families of generalized Richards' functions are proportional to the right hand side of the generalized Richards' growth models proposed. Subclasses of strong and weak Allee functions and functions with no Allee effect are characterized. The study of their bifurcation structure is presented in detail, this analysis is done based on the configurations of bifurcation curves and symbolic dynamics techniques. Generically, the dynamics of these functions are classified in the following types: extinction, semi-stability, stability, period doubling, chaos, chaotic semistability and essential extinction. We obtain conditions on the parameter plane for the existence of a weak Allee effect region related to the appearance of cusp points. To support our results, we present fold and flip bifurcations curves and numerical simulations of several bifurcation diagrams.

Avaliação e substituição de produtos químicos no sector BOF da Swedwood Portugal

A crescente preocupação com aspectos ambientais tornou-se uma questão incontornável para as empresas. Assim, a legislação aplicável obriga a maior controlo de qualquer tipo de perigo que ponha em causa a saúde humana ou o ambiente. Deste modo, a Swedwood Portugal é obrigada a implementar algumas medidas de controlo dos produtos químicos. Assim, os objectivos deste estágio curricular fundamentamse em identificar, avaliar e substituir ou minimizar os impactos dos produtos químicos (PQ’s) que, de acordo com especificações REACH (Regulamento da Comissão Europeia, relativo a Registo, Avaliação, Autorização e restrição de substâncias Químicas) e da Swedwood Internacional não podem ser utilizados. Como tal, o trabalho descrito nesta dissertação foi dividido em várias etapas. A primeira etapa consistiu em identificar todos os PQ’s utilizados no sector Board On Frame (BOF) da Swedwood Portugal. Feito este inventário, foi então criada uma base de dados em formato Microsoft Office Access que permitiu compilar a informação mais relevante dos PQ’s, para uma consulta mais simples e expedita, substituindo a já existente e desactualizada base de dados de PQ’s em formato Microsoft Office Excel. No total foram inventariados 243 PQ’s. Contudo, não foi possível obter as Fichas de Segurança de todos e, por isso, apenas 185 foram registados na base de dados. Estes 185 PQ’s existentes no sector BOF da Swedwood Portugal, foram submetidos a uma avaliação das substâncias que os compõem de acordo com uma ferramenta informática criada pela Swedwood Internacional – Substitution Evaluation Key (SEK). Esta ferramenta usa três listas europeias de substâncias químicas que permitem a avaliação de produtos químicos indirectos: Substances of Very High Concern (SVHC) da Agência Europeia de Produtos Químicos (ECHA), Substitute It Now (SIN) da ChemSec (Organização sueca dedicada ao ambiente) e PRIO da Agência Sueca de Produtos Químicos (Kemi). As três listas incluem substâncias de carácter de tal forma perigoso que a sua utilização deve ser restringida ou até eliminada. Logo, os PQ’s indirectos que contenham substâncias presentes em, pelo menos, uma destas listas devem ser imediatamente substituídos por outros cuja avaliação seja positiva. Por outro lado, para produtos químicos directos, as restrições encontram-se numa especificação imposta pela IKEA, IOS-MAT-0066. Concluída a avaliação, foi então necessário encontrar alternativas viáveis aos PQ’s avaliados negativamente. Como tal, a primeira abordagem consistiu em contactar os fabricantes dos PQ’s a substituir de modo a que estes pudessem apresentar as suas próprias alternativas. Caso estes não apresentassem alternativas viáveis, então contactarse- iam novos fornecedores. Dos 185 PQ’s registados na base de dados e avaliados, 30 produtos químicos indirectos existentes nas fábricas não obedeciam aos critérios impostos pela SEK, estando os produtos químicos directos todos de acordo com as imposições da IOS-MAT-0066. Os 30 PQ’s indirectos do Sector BOF da Swedwood Portugal que incluem as substâncias químicas com carácter perigoso apresentam características Cancerígenas, Mutagénicas e tóxicas para a Reprodução (CMR), irritantes e/ou sensibilizantes e perigosas, a longo prazo, para o ambiente. Para estes PQ’s foram apresentadas alternativas viáveis no que concerne a impactos para a saúde ou para o ambiente e os respectivos custos associados (admitindo quantidades mínimas vendidas). Contudo, não foi possível em tempo útil testar estas alternativas no funcionamento da empresa de modo a avaliar a sua eficiência técnica.

Colloidal interactions in two-dimensional nematics

The interaction between two disks immersed in a 2D nernatic is investigated i) analytically using the tenser order parameter formalism for the nematic configuration around isolated disks and ii) numerically using finite-element methods with adaptive meshing to minimize the corresponding Landau-de Gennes free energy. For strong homeotropic anchoring, each disk generates a pair of defects with one-half topological charge responsible for the 2D quadrupolar interaction between the disks at large distances. At short distance, the position of the defects may change, leading to unexpected complex interactions with the quadrupolar repulsive interactions becoming attractive. This short-range attraction in all directions is still anisotropic. As the distance between the disks decreases, their preferred relative orientation with respect to the far-field nernatic director changes from oblique to perpendicular.

Perceções de doença como determinantes de comportamentos de saúde na asma

Objetivos: Identificar e caracterizar perceções de doença e sua associação com níveis de adesão à terapêutica e controlo da doença na asma. Métodos: Estudo observacional-descritivo transversal cuja amostra é constituída por 33 estudantes asmáticos, de ambos os sexos e idade 18-29 anos (M=20,33; DP=2,04), que completaram o Illness Perception Questionnaire (IPQ-R), a Medida de Adesão aos Tratamentos (MAT) e o Asthma Control Test (ACT). Resultados: A maioria dos indivíduos percepciona a asma como doença crónica, cíclica, que pode ser controlada pela sua acção e/ou tratamento. A maioria apresenta um bom nível de controlo da asma, evidenciando 84,8% uma perceção adequada do controlo da sua doença. Embora apresentem um bom nível de adesão, apenas 28% toma medicação preventiva diariamente, referindo 45,2% já ter interrompido a medicação por se sentir melhor. Foram encontradas correlações significativas entre nível de adesão e perceção de duração cíclica da doença (rs (30)= -0,38; p<0,05), entre perceção de controlo através do tratamento e nível de controlo da doença (rs (33) = 0,386; p<0,05) e entre sintomas e perceção de controlo da doença (rs (33) = 0,737; p<0,01). Conclusões: Os resultados evidenciam o papel das perceções de doença na adoção de comportamentos de saúde na asma, nomeadamente a adesão à terapêutica, que vão traduzir-se no nível de controlo alcançado pelos doentes. Desenvolver intervenções individualizadas, centradas no doente, que contribuam para corrigir crenças inadequadas poderá, pois, potenciar um envolvimento ativo do doente no controlo da sua doença, contribuindo para uma melhoria da sua Qualidade de Vida.

Characterizations of power indices based on null player free winning coalitions

In this paper, we characterize two power indices introduced in [1] using two different modifications of the monotonicity property first stated by [2]. The sets of properties are easily comparable among them and with previous characterizations of other power indices.

Flexibility in a Stackelberg leadership with differentiated goods

We study the effects of product differentiation in a Stackelberg model with demand uncertainty for the first mover. We do an ex-ante and ex-post analysis of the profits of the leader and of the follower firms in terms of product differentiation and of the demand uncertainty. We show that even with small uncertainty about the demand, the follower firm can achieve greater profits than the leader, if their products are sufficiently differentiated. We also compute the probability of the second firm having higher profit than the leading firm, subsequently showing the advantages and disadvantages of being either the leader or the follower firm.

Specification of software architecture reconfiguration

In the past years, Software Architecture has attracted increased attention by academia and industry as the unifying concept to structure the design of complex systems. One particular research area deals with the possibility of reconfiguring architectures to adapt the systems they describe to new requirements. Reconfiguration amounts to adding and removing components and connections, and may have to occur without stopping the execution of the system being reconfigured. This work contributes to the formal description of such a process. Taking as a premise that a single formalism hardly ever satisfies all requirements in every situation, we present three approaches, each one with its own assumptions about the systems it can be applied to and with different advantages and disadvantages. Each approach is based on work of other researchers and has the aesthetic concern of changing as little as possible the original formalism, keeping its spirit. The first approach shows how a given reconfiguration can be specified in the same manner as the system it is applied to and in a way to be efficiently executed. The second approach explores the Chemical Abstract Machine, a formalism for rewriting multisets of terms, to describe architectures, computations, and reconfigurations in a uniform way. The last approach uses a UNITY-like parallel programming design language to describe computations, represents architectures by diagrams in the sense of Category Theory, and specifies reconfigurations by graph transformation rules.

The effects of clinical support surfaces on pressure as a risk factor in the development of pressure ulcers, from a radiographical perspective: a narrative literature review

Purpose: Pressure ulcers are a high cost, high volume issue for health and medical care providers, having a detrimental effect on patients and relatives. Pressure ulcer prevention is widely covered in the literature, but little has been published regarding the risk to patients in the radiographical setting. This review of the current literature is to identify findings relevant to radiographical context. Methods: Literature searching was performed using Science Direct and Medline databases. The search was limited to articles published in the last ten years to remain current and excluded studies containing participants less than 17 years of age. In total 14 studies were acquired; three were excluded as they were not relevant. The remaining 11 studies were compared and reviewed. Discussion: Eight of the studies used ‘healthy’ participants and three used symptomatic participants. Nine studies explored interface pressure with a range of pressure mat technologies, two studies measured shear (MRI finite element modelling, and a non-invasive instrument), and one looked at blood flow and haemoglobin oxygenation. A range of surfaces were considered from trauma, nursing and surgical backgrounds for their ability to reduce pressure including standard mattresses, high specification mattresses, rigid and soft layer spine boards, various overlays (gel, air filled, foam). Conclusion: The current literature is not appropriate for the radiographic patient and cannot be extrapolated to a radiologic context. Sufficient evidence is presented in this review to support the need for further work specific to radiography in order to minimise the development of PU in at risk patients.