763 resultados para Industria de construção civil - Automação
Resumo:
The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks
Resumo:
O setor de construção civil enfrenta sérios problemas quanto à disposição de resíduos, uma vez que gera grandes quantidades ao longo do processo de execução das obras ou devido ao desmonte de construções já existentes. A disposição inadequada desses resíduos pode provocar sérios danos ambientais, tais como degradação do solo e recursos hídricos. Uma opção interessante pode ser seu uso agrícola, entretanto existem poucos estudos sobre o tema. Assim, o presente estudo visou caracterizar resíduos da construção civil e avaliar seu efeito sobre alguns atributos do solo. Para tal, foram realizadas análises de pH, teor de macro e micronutrientes e de elementos potencialmente tóxicos. Os resultados indicaram que os resíduos não poderiam ser utilizados como fonte de nutrientes e que também não apresentavam limitações quanto à presença de elementos potencialmente tóxicos. Os altos valores de pH encontrados indicaram potencial dos resíduos em alcalinizar do solo, o que foi confirmado no ensaio em vasos. Também se constatou que os resíduos provocaram aumento da CTC. Assim, concluiu-se que é viável utilizar esses resíduos da construção civil em solos agrícolas, embora mais avaliações ainda devam ser realizadas.
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry
Resumo:
Dissertação de Mestrado, Finanças Empresariais, Faculdade de Economia, Universidade do Algarve, 2016
Resumo:
Dissertação de mest. em Gestão Empresarial, Faculdade de Economia, Univ. do Algarve, 2003
Resumo:
The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load
Resumo:
As questões ambientais têm assumido cada vez mais um papel importante e principalmente de reflexão no setor da construção civil e no público em geral. Consequentemente é notória a crescente consciencialização em questões ambientais desde a década de 60. O sector da construção civil gera grandes impactes ambientais, assim, surgiu a necessidade de pensar e desenvolver medidas e ações de modo a melhorar o seu desempenho. É essencial que o Dono da Obra e o Empreiteiro adotem medidas de prevenção ambiental, apostando na promoção da gestão ambiental, de acordo com a legislação em vigor garantindo o seu cumprimento e tornando o seu desempenho ambiental mais eficiente. Este projeto propõe uma abordagem à valorização da gestão ambiental na construção civil, abordando questões de sustentabilidade e planos de minimização e mitigação dos impactes ambientais gerados neste sector, apresentando-se como guia de procedimentos em obra, estabelecendo diretrizes e instruções a este nível. No desenvolvimento deste projeto, no enquadramento das questões ambientais e dos impactes gerados no sector da construção civil, aborda-se com maior pormenor os aspetos da gestão ambiental, efetuando-se um levantamento ao nível dos requisitos legais e boas práticas ambientais em relação à gestão dos resíduos, substâncias perigosas, águas residuais, emissões difusas, ruído e situações de emergência. Como caso prático, efetuou-se o acompanhamento ao nível da gestão ambiental a uma obra, por forma aplicar e demonstrar os conhecimentos adquiridos, no período compreendido entre setembro e março do ano atual, na qual foram identificados os impactes ambientais da empreitada, as medidas que foram implementadas, o controlo e monitorização, a análise dos dados constatados e as propostas de melhoria ao desempenho ambiental observado.
Resumo:
Pós-graduação em Engenharia Civil - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
CCurrently there are various systems for the evaluation of environmental impacts of buildings, known as tools of environmental certification. Among these, the tool LEED for New Construction and Major Renovations has been the most widely used and accepted worldwide, in assessing the sustainability of buildings. Therefore, this study aimed to analyze the tool for LEED certification for construction work in Brazil, which ranks fourth in the world ranking records certification of sustainable buildings. It was found in this analysis that the assumptions of this tool are encouraging the use of more sustainable and less impactful on the environment as it promotes the deployment of innovative projects from a technological standpoint, , as well as the valuation of enterprises certified. Also, very significant results obtained in terms of energy efficiency and environmental quality in occupied buildings
Resumo:
The civil construction in Brazil has grown a lotover the last years. This has caused a greater competition between companies of the sector. A little difference in quality in service or product a company offers can determine their success in the market. There is a growing demand for tools that optimize processes and bring greater quality to each activity in these companies. Performance measurement systems make it possible to control process efficiency and effectiveness using performance indicators. Considering this need, the paper before you has the objective of creating basic guidelines to introduce performance measurement systems inbuilding installations project companies. A theoretical reference is presented to describe organizational aspects of project companies along with performance measurement systems characteristics. Using a qualitative research methodology, a study case was executed with interviews, observation and document analysis as evidence sources. In the study case, limitations where identified, such as, high degree of product and process flexibility, dependence on subjective analysis for decision making and lack of specialized information systems. Considering the theoretical reference and the study case,the proposed guidelines intend to ease and guarantee greater chances of success when implanting one of these systems
Resumo:
Energy efficiency has gained significant importance in recent years, mainly due to cyclical climatic conditions and current supply of natural resources. The present work deals with the procedures and requirements necessary to evaluate a building to a level of efficiency corresponding to your project and the actual implemented. To perform this analysis, we adopted the technical regulation efficiency prepared by Procel along with other agencies of the sector. The Regulation aims to create a model for the technical evaluation of the efficiency of buildings, popularize and expand the theme specification of conditions drawn up today. The building analyzed in this study was the library of UNESP, Guaratinguetá. Still, after the completion of the final efficiency analysis, are presented proposals for intervention that can improve and enhance the present situation of the building. The interventions are based on many technical factors and local conditions of climate and supply of resource. The issue of sustainability was explained in order to serve as a tool to expand the options available to upgrade a building in front of their impact on the environment