Potencial de geração de metano em aterros sanitários através dos modelos IPCC, USEPA e Scholl Canyon estudo de caso do aterro sanitário de Moskogen, Kalmar, Suécia.

A utilização do metano (CH4) presente no biogás gerado através da degradação anaeróbica de resíduos orgânicos depositados em aterros sanitários como fonte de energia é uma tecnologia em expansão, principalmente nos países em desenvolvimento. Para assegurar um melhor aproveitamento do CH4 e a viabilidade econômica do projeto de exploração energética é necessário que estes empreendimentos avaliem sua capacidade de produzir este gás com o passar dos anos, mesmo após o encerramento da deposição de resíduos. O potencial de geração é comumente estimado a partir de modelos cinéticos de primeira ordem propostos por conceituadas instituições, entretanto, estudos recentes apontam alto grau de incerteza e diferenças relevantes entre os resultados obtidos com cada metodologia. Este trabalho tem por objetivo analisar a variação dos resultados das estimativas de emissão de metano dos modelos recomendados pela USEPA, Banco Mundial (Scholl Canyon) e IPCC utilizando tanto dados e informações disponibilizadas do aterro sanitário Moskogen, localizado em Kalmar, Suécia, que foi operado entre 1977 e 2008. Além de estimar a capacidade de geração de CH4, objetiva-se identificar qual o modelo cujas estimativas mais se aproximam dos dados de biogás efetivamente medidos e quanto gás ainda pode ser extraído do aterro. O estudo ainda avaliou como valores diferentes para os parâmetros principais dos modelos afetam a estimativa de geração final. O modelo IPCC mostrou-se o mais confiável dentre os analisados, estimando que o aterro Moskogen produza mais de 102 milhões de m de CH4 entre 1977 e 2100, sendo 39,384 milhões passíveis de extração de 2012 a 2100. Os demais modelos apresentaram premissas inadequadas com a realidade do aterro sanitário estudado. Contudo, mesmo com a superioridade do modelo proposto pelo IPCC, maiores estudos são necessários no local, que levantem outras informações de campo como a vazão passiva de gás pela camada de cobertura do aterro e uma melhor estimativa do percentual de material orgânico biodegradável presente em cada fração de resíduos depositada em Moskogen.

Impactos do desenvolvimento do potencial hidroelétrico sobre os ecossistemas aquáticos do Rio Tocantins.

A priorização da implantação de usinas hidrelétricas no Brasil deve-se, primordialmente, ao vasto potencial hidrelétrico existente no país e à competitividade econômica que esta fonte apresenta. PPara atender à crescente demanda, foram implantados ao longo dos anos, diversos empreendimentos hidrelétricos por todo o país. Apesar do inequívoco sucesso quanto ao objetivo central de tais empreendimentos - fornecer energia para o desenvolvimento econômico tais empreendimentos causam impactos com diferentes níveis de severidade aos sistemas físico-biótico, sócio-econômico e cultural das regiões em que as instalações são realizadas. O presente trabalho objetivou identificar problemas e impactos ambientais nos ecossistemas aquáticos do Rio Tocantins relacionados com o desenvolvimento do seu potencial hidroelétrico, de forma a contribuir com a compatibilização de geração de energia e conservação da biodiversidade e manutenção dos fluxos gênicos. O cenário considerado contemplou os empreendimentos em operação e aqueles em instalação, com estudos de viabilidade aprovados e licenças prévias obtidas. A metodologia de Análise de Cadeia Causal (ACC) foi utilizada para que a partir da identificação dos problemas e impactos ambientais prioritários, a relação dos mesmos com diferentes causas imediatas, setoriais e raízes pudesse ser estabelecida. A hierarquização dos impactos foi feita através de matriz de caracterização, tendo as comunidades íctias como principais indicadores. Os impactos considerados como mais relevantes foram: (i) queda na qualidade dos recursos hídricos, (ii) perda e alteração de habitats, (iii) mudanças na estabilidade dos ecossistemas, (iv) redução de recursos pesqueiros, (v) interferência com as comunidades de bentos e de microorganismos, (vi) alteração nas cadeias alimentares e (vii) interferência na dispersão de comunidades íctias e de mamíferos. O conhecimento sobre a biodiversidade existente e a identificação dos principais impactos existentes e em potencial nos ecossistemas aquáticos do Rio Tocantins, representam um passo importante para o desenvolvimento de opções políticas eficazes com vistas à minimização da degradação ambiental decorrente do setor hidroelétrico.

Localização colaborativa em robótica de enxame.

Diversas das possíveis aplicações da robótica de enxame demandam que cada robô seja capaz de estimar a sua posição. A informação de localização dos robôs é necessária, por exemplo, para que cada elemento do enxame possa se posicionar dentro de uma formatura de robôs pré-definida. Da mesma forma, quando os robôs atuam como sensores móveis, a informação de posição é necessária para que seja possível identificar o local dos eventos medidos. Em virtude do tamanho, custo e energia dos dispositivos, bem como limitações impostas pelo ambiente de operação, a solução mais evidente, i.e. utilizar um Sistema de Posicionamento Global (GPS), torna-se muitas vezes inviável. O método proposto neste trabalho permite que as posições absolutas de um conjunto de nós desconhecidos sejam estimadas, com base nas coordenadas de um conjunto de nós de referência e nas medidas de distância tomadas entre os nós da rede. A solução é obtida por meio de uma estratégia de processamento distribuído, onde cada nó desconhecido estima sua própria posição e ajuda os seus vizinhos a calcular as suas respectivas coordenadas. A solução conta com um novo método denominado Multi-hop Collaborative Min-Max Localization (MCMM), ora proposto com o objetivo de melhorar a qualidade da posição inicial dos nós desconhecidos em caso de falhas durante o reconhecimento dos nós de referência. O refinamento das posições é feito com base nos algoritmos de busca por retrocesso (BSA) e de otimização por enxame de partículas (PSO), cujos desempenhos são comparados. Para compor a função objetivo, é introduzido um novo método para o cálculo do fator de confiança dos nós da rede, o Fator de Confiança pela Área Min-Max (MMA-CF), o qual é comparado com o Fator de Confiança por Saltos às Referências (HTA-CF), previamente existente. Com base no método de localização proposto, foram desenvolvidos quatro algoritmos, os quais são avaliados por meio de simulações realizadas no MATLABr e experimentos conduzidos em enxames de robôs do tipo Kilobot. O desempenho dos algoritmos é avaliado em problemas com diferentes topologias, quantidades de nós e proporção de nós de referência. O desempenho dos algoritmos é também comparado com o de outros algoritmos de localização, tendo apresentado resultados 40% a 51% melhores. Os resultados das simulações e dos experimentos demonstram a eficácia do método proposto.

A exploração e a produção não convencionais de petróleo e gás natural:uma proposta de regulação não convencional

Esta dissertação debruçou-se sobre o estudo da regulação da exploração e da produção de recursos não convencionais de petróleo e gás natural e de controvérsias acerca da matéria. Partimos de fundamentos e segmentos do Direito Internacional Contemporâneo, sua interseção com o direito interno, precisamente no que diz respeito ao tema da regulação e os seus novos contornos, para então adentrar na regulação propriamente dita dos recursos não convencionais. Após ilustrarmos os diferentes tratamentos conferidos à exploração e à produção de recursos não convencionais no direito comparado, destacamos, como estudo de caso, o tratamento conferido no Brasil à questão e as controvérsias decorrentes dos não convencionais. Ao final, apresentamos algumas proposições com vistas a viabilizar tal atividade não apenas no Brasil como em demais países, por meio de uma regulação não convencional, isto é, elaborada de forma compartilhada e global, pautada nas Melhores Práticas da Indústria, nos princípios de direito internacional e na governança global, que respeite as peculiaridades dos recursos não convencionais e que conte com uma maior aceitação pelos diferentes atores envolvidos e/ou afetados por essa atividade exploratória, por meio da promoção do diálogo e do esclarecimento necessário. Acreditamos que dessa forma estar-se-ia por estimular uma era de ouro global ao gás natural, a considerar todas as suas vantagens perante demais fontes energéticas, proporcionando o desenvolvimento dos Estados de forma ambientalmente sustentável, resguardando-se os interesses dos investidores e, principalmente, dos principais beneficiários da política energética que são os indivíduos.

Testicular development in migrant and spawning bluefin tuna (Thunnus thynnus (L.)) from the eastern Atlantic and Mediterranean

Testis histological structure was studied in bluefin tuna (Thunnus thynnus) from the eastern Atlantic and Mediterranean during the reproductive season (from late April to early June). Testicular maturation was investigated by comparing samples from bluefin tuna caught on their eastward reproductive migration off Barbate (Strait of Gibraltar area) with samples of bluefin tuna fished in spawning grounds around the Balearic Islands. Histological evaluations of cross sections showed that the testis consists of two structurally different regions, an outer proliferative region where germ cells develop synchronously in cysts, and a central region made up of a well-developed system of ducts that convey the spermatozoa produced in the proliferative region to the main sperm duct. Ultrastructural features of the different stages of the male germ cell line are very similar to those described in other teleost species. The bluefin tuna testis is of the unrestricted spermatogonial testicular type, where primary spermatogonia are present all along the germinative portion of the lobules. All stages of spermatogenesis were present in the gonad tissue of migrant and spawning bluefin tuna, although spermatids were more abundant in spawning fish. The testis size was found to increase by a factor of four (on average) during migration to the Mediterranean spawning grounds, whereas the fat bodies (mesenteric lipid stores associated with the gonads) became reduced to half their weight, and the liver mass did not change significantly with sexual maturation. Linear regression analysis of the pooled data of migrant and spawning bluefin tuna revealed a significant negative correlation between the gonad index (IG) and the fat tissue index (IF), and a weaker positive correlation between the gonad index (IG) and the liver index (IL). Our analyses indicate that the liver does not play a significant role in the storage of lipids and that mesenteric lipid reserves constitute an important energy source for gametogenesis in bluefin tuna.

Distribution of phosphorylase in some fish and shell fish

Phosphorylase content in the muscle of some fish and shell fish were estimated. Jew fish (Johnius dussumeri) and 'sea naran'(Penaeus indicus) recorded the highest enzyme content among the fish and shell fish studied. As phosphorylase is the key enzyme in glycogenolysis, which is the energy source of fish for muscular activity, the possible role of phosphorylase content as an index of muscular capacity and post-mortem autolysis is discussed.

A review of the distribution of organic compounds in freshwater lakes and rivers

The paper reviews the distribution of organic compounds in freshwater lakes and rivers. The study of dissolved organic matter in natural lakes and rivers is of importance for a variety of reasons. The organic matter may serve in part or whole as an energy source for organisms living in the aquatic environment, or it may supply them with materials essential for their nutrition.

BarraCUDA - a fast short read sequence aligner using graphics processing units.

BACKGROUND: With the maturation of next-generation DNA sequencing (NGS) technologies, the throughput of DNA sequencing reads has soared to over 600 gigabases from a single instrument run. General purpose computing on graphics processing units (GPGPU), extracts the computing power from hundreds of parallel stream processors within graphics processing cores and provides a cost-effective and energy efficient alternative to traditional high-performance computing (HPC) clusters. In this article, we describe the implementation of BarraCUDA, a GPGPU sequence alignment software that is based on BWA, to accelerate the alignment of sequencing reads generated by these instruments to a reference DNA sequence. FINDINGS: Using the NVIDIA Compute Unified Device Architecture (CUDA) software development environment, we ported the most computational-intensive alignment component of BWA to GPU to take advantage of the massive parallelism. As a result, BarraCUDA offers a magnitude of performance boost in alignment throughput when compared to a CPU core while delivering the same level of alignment fidelity. The software is also capable of supporting multiple CUDA devices in parallel to further accelerate the alignment throughput. CONCLUSIONS: BarraCUDA is designed to take advantage of the parallelism of GPU to accelerate the alignment of millions of sequencing reads generated by NGS instruments. By doing this, we could, at least in part streamline the current bioinformatics pipeline such that the wider scientific community could benefit from the sequencing technology.BarraCUDA is currently available from http://seqbarracuda.sf.net.

Effect of dietary carbohydrate-to-lipid ratios on growth and feed utilization in Chinese longsnout catfish (Leiocassis longirostris Gunther)

An 8-week growth trial was carried out in a semi-recirculation system at 26 +/- 0.5 degrees C to investigate the optimal dietary carbohydrate-to-lipid (CHO:L) ratio for carnivorous Chinese longsnout catfish (Leiocassis longirostris Gunther). Triplicate tanks of fish were assigned to each of five isocaloric and isonitrogenous diets with different carbohydrate-to-lipid ratios (0.75, 1.48, 1.98, 2.99 and 5.07). The results showed that a higher specific growth rate (SGR) and feed rate (FR) were observed in the fish fed diet ratios of 1.98 CHO:L (P < 0.05). Overloading dietary carbohydrate (5.07 CHO:L ratio) caused skeletal malformations. Apparent digestibility of dry matter (ADC(d)) significantly increased with dietary CHO:L ratio (P < 0.05), while significantly higher apparent digestibility of protein (ADC(p)) and apparent digestibility of energy (ACD(e)) was observed only in the 1.98 CHO:L group (P < 0.05). Whole body contents of dry matter, lipid and energy significantly increased as the CHO:L ratio decreased (P < 0.05). The hepatosomatic index (HSI) was highest at 1.98 CHO:L ratio (P < 0.05). Highest dietary CHO:L ratio resulted in lower liver glycogen, liver lipid, plasma glucose and plasma triacylglycerol (P < 0.05), whereas there was no significant difference in plasma total cholesterol (P > 0.05). High dietary CHO:L ratio caused pathological changes in fish morphology and liver histology. Based on maximum growth, the optimal carbohydrate-to-lipid ratio was 1.98 for Chinese longsnout catfish.

原油在扰动土壤中入渗的实验研究

随着国家发展对能源的迫切需求,石油作为我国能源的主要构成之一,其开采和冶炼也在不断地增加。然而由于某些相关管理环节的不完善引发的污染事故日趋增多,其中原油的土壤污染问题尤为严重。为研究原油在土壤中的入渗过程,通过室内土柱模拟实验,测定了原油在土壤中入渗的湿润距离、湿润推进速率与时间的关系以及被原油污染的土壤中残留物的含量。结果表明:对于同一质地土壤,随着容重的增加,原油在土壤中入渗的湿润距离、湿润推进速率和残留物的含量均降低;容重相同而质地不同的土壤,随着粉粒含量的增加,原油在土壤中入渗的湿润距离、湿润推进速率和残留物的含量均表现为降低趋势;原油在土壤中入渗的湿润距离随时间的变化可以用对数函数拟合,湿润推进速率与时间的关系可以用幂函数拟合,均达到显著水平。研究原油在土壤中的入渗对于了解原油在土壤中的迁移有着重要的意义。

A study of internal solitary waves observed on the continental shelf in the northwestern South China Sea

Based on in-situ time series data from the acoustic Doppler current profiler (ADCP) and thermistor chain in Wenchang area, a sequence of internal solitary wave (ISW) packets was observed in September 2005, propagating northwest on the continental shelf of the northwestern South China Sea (SCS). Corresponding to different stratification of the water column and tidal condition, both elevation and depression ISWs were observed at the same mooring location with amplitude of 35 m and 25 m respectively in different days. Regular arrival of the remarkable ISW packets at approximately the diurnal tidal period and the dominance of diurnal internal waves in the study area, strongly suggest that the main energy source of the waves is the diurnal tide. Notice that the wave packets were all riding on the troughs and shoulders of the internal tides, they were probably generated locally from the shelf break by the evolution of the internal tides due to nonlinear and dispersive effects.

Metabolic characteristics of sea cucumber Apostichopus japonicus (Selenka) during aestivation

Metabolic characteristics of the sea cucumber Aposticholpus japonicus (Selenka) during aestivation were studied in the laboratory. The effects of water temperature on oxygen consumption rate (OCR) and ammonia-N excretion rate (AER) in A. japonicus were determined by the Winkler and Hypobromite methods, respectively. Mature (large, 148.5 +/- 15.4 g, medium 69.3 +/- 6.9 g) and immature (small, 21.2 +/- 4.7 g) individuals aestivated at water temperatures of 20 and 25 degrees C, respectively. The metabolic characteristics of mature individuals were different from immature individuals during this period. The OCR of mature sea cucumbers peaked at 20 degrees C, and then dropped significantly at higher temperatures, whereas the OCR of the immature animals continued to increase slightly, even beyond the aestivation temperature. The AER of mature individuals peaked at 20 T, while that of the immature animals peaked at 25 degrees C. The relationships between dry weight (DW) and absolute oxygen consumption (R) and absolute ammonia-N excretion (N) could be described by the regression equation R or N=aW(b). With the exception of 15 degrees C, the O/N ratios (calculated in atomic equivalents) of large size sea cucumbers was close to 20 across the temperatures used in this study, indicating that their energy Source was a combination of lipid and protein. Oil the other hand, apart from small individuals maintained at 10 degrees C, the O/N ratios of the medium and small sea Cucumbers were close to 10, indicating that protein was their major energy source. The O/N ratios in all size groups remained unchanged after aestivation was initiated. (c) 2005 Elsevier B.V. All rights reserved.

随钻地震技术的研究及应用

Seismic While Drilling (SWD) is a new wellbore seismic technique. It uses the vibrations produced by a drill-bit while drilling as a downhole seismic energy source. The continuous signals generated by the drill bit are recorded by a pilot sensor attached to the top of the drill-string. Seismic wave receivers positioned in the earth near its surface receive the seismic waves both directly and reflection from the geologic formations. The pilot signal is cross-correlated with the receiver signals to compute travel-times of the arrivals (direct arrival and reflected arrival) and attenuate incoherent noise. No downhole intrusmentation is required to obtain the data and the data recording does not interfere with the drilling process. These characteristics offer a method by which borehole seismic data can be acquired, processed, and interpreted while drilling. As a Measure-While-Drill technique. SWD provides real-time seismic data for use at the well site . This can aid the engineer or driller by indicating the position of the drill-bit and providing a look at reflecting horizons yet to be encountered by the drill-bit. Furthermore, the ease with which surface receivers can be deployed makes multi-offset VSP economically feasible. First, this paper is theoretically studying drill-bit wavefield， interaction mode between drill-bit and formation below drill-bit , the new technique of modern signal process was applied to seismic data, the seismic body wave radiation pattern of a working roller-cone drill-bit can be characterized by theoretical modeling. Then , a systematical analysis about the drill-bit wave was done, time-distance equation of seismic wave traveling was established, the process of seismic while drilling was simulated using the computer software adaptive modeling of SWD was done . In order to spread this technique, I have made trial SWD modeling during drilling. the paper sketches out the procedure for trial SWD modeling during drilling , the involved instruments and their functions, and the trial effect. Subsurface condition ahead of the drill-bit can be predicted drillstring velocity was obtained by polit sensor autocorrelation. Reference decovolution, the drillstring multiples in the polit signal are removed by reference deconvolution, the crosscorrelation process enhance the signal-to-noise power ratio, lithologies. Final, SWD provides real-time seismic data for use at the well site well trajectory control exploratory well find out and preserve reservoirs. intervel velocity was computed by the traveltime The results of the interval velocity determination reflects the pore-pressure present in the subsurface units ahead of the drill-bit. the presences of fractures in subsurface formation was detected by shear wave. et al.

天然气藏地震识别技术研究

The Research of Seismic Recognition Techniques for Gas Reservoir Shang Yong_sheng(Geophysics) Directed by Yang Chang-chun Abstract Gas reservior is one of the most important nature resources. Someone forecast that the output will exceed crude oil in 2015 and become the largest energy source. Recently,more and more gas reservior are discovered as the oil field and gas filed exploration go deep into development. Although the gas proved reserves rise greatly the explorative degree of natural gas resource in our country is still very low. The potential of gas exploration is very great and our task is so hard. How to recognise and discover new gas reservoir is the first task based on the great gas reservior resources foreground. the gas reservior in different oil and gas field have its special gas generation, reservoiring, physical property conditions. However,it may have the same geophysical characters. So,it is very important to analyse, research, summarizing the geophysical characters of the gas reservior and make use of the characters to identify the gas layer effectively. This paper start with modeling,and it discuss the geophysical characters of the gas reservior response. It analyse the seismical wave characters of the gas reservoir. Furthermore, it summarize the method of using the seismica profile to identify the gas reservior directly. The paper discuss the research of extracting diffraction wave for mass diffraction wave grow at the edge of the gas reservoir at the seismic section. Making use of the technique of extracting diffraction wave to identify the gas reservior is the first experiment of the gas reservoir prediction technique. The avo technology is a new geophysical method. From the pre-stack analysis, this paper discuss the technique of using the rich information to identify the gas reservoir. Based on the case study of the Qidam basin and the Hailaer basin it discuss the method of predicating gas reservoir using pre-stack information. It include pre-stack amplitude preserve process, AVO modeling, fluid replacement technique, AVO analysis and interpretation technique. The paper summarize a gas reservoir prediction procedure focusing on the pre-stack information. The seismic wave will cause great attenuation when it pass through the gas layer and the high frequency component loss. This paper discuss the technique of extracting seismic attributes to represent the attenuation degree of seismica wave. Based on the attenuation attributes,it does the research of the gas reservor identification and prediction. At last,the paper discuss the method of calculating the azimuthal anisotropy to predict the fracture reservoir. Keyword: gas reservoir, diffraction wave, AVO, attenuation attribute,fracture prediction

城市发展与地质环境相互作用机制及数量分析—北海市可持续发展战略研究

Based on a viewpoint of an intricate system demanding high, this thesis advances a new concept that urban sustainable development stratagem is a high harmony and amalgamation among urban economy, geo-environment and tech-capital, and the optimum field of which lies in their mutual matching part, which quantitatively demarcates the optimum value field of urban sustainable development and establishes the academic foundation to describe and analyze sustainable development stratagem. And establishes a series of cause-effect model, a analysissitus model, flux model as well as its recognizing mode for urban system are established by the approach of System Dynamics, which can distinguish urban states by its polarity of entropy flows. At the same time, the matter flow, energy flow and information flow which exist in the course of urban development are analyzed based on the input/output (I/O) relationships of urban economy. And a new type of I/O relationships, namely new resources-environment account, are established, in which both resource and environment factors are considered. All above that settles a theoretic foundation for resource economy and environment economy as well as quantitative relationships of inter-function between urban development and geoenvironment, and gives a new approach to analyze natinal economy and urban sustainable development. Based on an analysis of the connection between resource-environmental construct of geoenvironment and urban economy development, the Geoenvironmental Carrying Capability (GeCC) is analyzed. Further more, a series of definitions and formula about the Gross Carrying Capability (GCC), Structure Carrying Capability (SCC) and Impulse Carrying Capability (ICC) is achieved, which can be applied to evaluate both the quality and capacity of geoenvironment and thereunder to determine the scale and velocity for urban development. A demonstrative study of the above is applied to Beihai city (Guangxi province, PRC), and the numerical value laws between the urban development and its geoenvironment is studied by the I/O relationship in the urban economy as following: · the relationships between the urban economic development and land use as well as consumption of underground water, metal mineral, mineral energy source, metalloid mineral and other geologic resources. · the relationships between urban economy and waste output such as industrial "3 waste", dust, rubbish and living polluted water as well as the restricting impact of both resource-environmental factors and tech-capital on the urban grow. · Optimization and control analysis on the reciprocity between urban economy and its geoenvironment are discussed, and sensitive factors and its order of the urban geoenvironmental resources, wastes and economic sections are fixed, which can be applied to determine the urban industrial structure, scale, grow rate matching with its geoenvironment and tech-capital. · a sustainable development stratagem for the city is suggested.