Experimental control of single-mode laser chaos by using continuous, time-delayed feedback

Control of chaos in the single-mode optically pumped far-infrared (NH3)-N-15 laser is experimentally demonstrated using continuous time-delay control. Both the Lorenz spiral chaos and the detuned period-doubling chaos exhibited by the laser have been controlled. While the laser is in the Lorenz spiral chaos regime the chaos has been controlled both such that the laser output is cw, with corrections of only a fraction of a percent necessary to keep it there, and to period one. The laser has also been controlled while in the period-doubling chaos regime, to both the period-one and -two states.

Stages of chaotic synchronization

In an experimental investigation of the response of a chaotic system to a chaotic driving force, we have observed synchronization of chaos of the response system in the forms of generalized synchronization, phase synchronization, and lag synchronization to the driving signal. In this paper we compare the features of these forms of synchronized chaos and study their relations and physical origins. We found that different forms of chaotic synchronization could be interpreted as different stages of nonlinear interaction between the coupled chaotic systems. (C) 1998 American Institute of Physics.

Metastable chaos in the ammonia ring laser

We report experimental studies of metastable chaos in the far-infrared ammonia ring: laser. When the laser pump power is switched from above chaos threshold to slightly below, chaotic intensity pulsations continue for a varying time afterward before decaying to either periodic or cw emission. The behavior is in good qualitative agreement with that predicted by the Lorenz equations, previously used to describe this laser. The statistical distribution of the duration of the chaotic transient is measured and shown to be in excellent agreement with the Lorenz equations in showing a modified exponential distribution. We also give a brief numerical analysis and graphical visualization of the Lorenz equations in phase space illustrating the boundary between the metastable chaotic and the stable fixed point basins of attraction. This provides an intuitive understanding of the metastable dynamics of the Lorenz equations and the experimental system.

Dimensional Accuracy of Computer-Aided Design/Computer-Assisted Manufactured Orbital Prostheses

Purpose: The aim of this research was to assess the dimensional accuracy of orbital prostheses based on reversed images generated by computer-aided design/computer-assisted manufacturing (CAD/CAM) using computed tomography (CT) scans. Materials and Methods: CT scans of the faces of 15 adults, men and women older than 25 years of age not bearing any congenital or acquired craniofacial defects, were processed using CAD software to produce 30 reversed three-dimensional models of the orbital region. These models were then processed using the CAM system by means of selective laser sintering to generate surface prototypes of the volunteers` orbital regions. Two moulage impressions of the faces of each volunteer were taken to manufacture 15 pairs of casts. Orbital defects were created on the right or left side of each cast. The surface prototypes were adapted to the casts and then flasked to fabricate silicone prostheses. The establishment of anthropometric landmarks on the orbital region and facial midline allowed for the data collection of 31 linear measurements, used to assess the dimensional accuracy of the orbital prostheses and their location on the face. Results: The comparative analyses of the linear measurements taken from the orbital prostheses and the opposite sides that originated the surface prototypes demonstrated that the orbital prostheses presented similar vertical, transversal, and oblique dimensions, as well as similar depth. There was no transverse or oblique displacement of the prostheses. Conclusion: From a clinical perspective, the small differences observed after analyzing all 31 linear measurements did not indicate facial asymmetry. The dimensional accuracy of the orbital prostheses suggested that the CAD/CAM system assessed herein may be applicable for clinical purposes. Int J Prosthodont 2010;23:271-276.

Transforming chaos to periodic oscillations

We demonstrate that the dynamics of an autonomous chaotic class C laser can be controlled to a periodic state via external modulation of the pump. In the absence of modulation, above the chaos threshold, the laser exhibits Lorenz-like chaotic pulsations. The average amplitude and frequency of these pulsations depend on the pump power. We find that there exist parameter windows where modulation of the pump power extinguishes the chaos in favor of simpler periodic behavior. Moreover we find a number of locking ratios between the pump and laser output follow the Farey sequence.

El rol de la usabilidad percibida sobre la confianza en las subastas online

Si bien se ha considerado que la usabilidad del sitio presente estudio se lleva a cabo en el caso particular web es una de las variables clave en la formación de de los sitios de subastas por Internet, que representan la confianza de los usuarios, esta relación no ha sido un mercado creciente y en auge entre los servicios a profundamente analizada respecto a su efecto directo través de Internet en Latinoamérica. Luego de probar la o mediado. Dentro de este contexto, se propone que la unidimensionalidad, fiabilidad y validez de las escalas usabilidad influye sobre la confianza, pero no de ma-de medida, se contrastan las hipótesis a través de un nera directa, sino más bien a través de la satisfacción, modelo de ecuaciones estructurales y una estrategia de con esta última actuando como variable mediadora. El modelos rivales.

El efecto de la triple hélice en los resultados de innovación

La innovación está relacionada con el crecimiento de las economías y de las empresas, y en un entorno cambiante como el actual, se presenta como una herramienta fundamental para conseguir ventajas competitivas. Esta investigación tiene por objetivo analizar la relación existente entre la capacidad de innovación de las empresas y la obtención de información de las mismas a través de la cooperación con competidores, proveedores, Universidades y otras instituciones públicas (Triple Hélice). En primer lugar se desarrolla una revisión bibliográfica de los conceptos relacionados para posteriormente, a través del método de ecuaciones estructurales, dar respuesta y aceptar la hipótesis propuesta que pone de manifiesto la relación existente entre los resultados de innovación de las empresas y la información obtenida de la Triple Hélice. La investigación se realiza con una muestra de empresas españolas, encuestadas por el Instituto Nacional de Estadística (INE), durante los años 2008-2010.

GESTIÓN DE RECURSOS INTANGIBLES EN INSTITUCIONES DE EDUCACIÓN SUPERIOR

Las organizaciones se desenvuelven en entornos exigentes y competitivos creados por demandas de las sociedades y marcados por la crisis financiera mundial a la que no escapan las Instituciones de Educación Superior (IES), que están orientadas a satisfacer las necesidades del entorno y a fortalecer el flujo de información y colaboración con la sociedad. En este contexto se plantea una investigación de tipo exploratorio y descriptivo, que se considera como un primer intento por desarrollar y probar empíricamente los aspectos teóricos existentes sobre el tema. El objetivo es determinar las influencias simultáneas que ejercen los recursos intangibles sobre la gestión estratégica en las IES. Estas relaciones se evaluaron con un análisis de estructuras de covarianzas que requirió la construcción y validación de un sistema de medida adecuado para cada una de las variables objeto de estudio. Dicho análisis arrojó como resultado que sólo dos de las cuatro hipótesis planteadas son significativas, loque demuestra que los recursos intangibles Gestión del conocimiento y Reputación Organizacional, son los que influyen directamente en los procesos de gestión estratégica que realizan las IES. A partir de estos descubrimientos se dispone de referentes empíricos sobre la Gestión de Recursos Intangibles, destacando el hecho que la gestión estratégica en las IES puede mejorar sustancialmente a través de la implementación de procesos que involucren el manejo adecuado de los intangibles que poseen.

Propuesta de una escala para medir la calidad del servicio de los centros de atención secundaria de salud

El Ministerio de Salud en Chile se ha planteado como uno de sus principales objetivos, proveer servicios acorde a las expectativas de la población. Para lograrlo, se requiere necesariamente, conocer cuál es la calidad del servicio ofrecida por los centros de salud. En Chile, los centros de atención secundaria, no han desarrollado escalas de calidad del servicio que tengan un buen grado de validez, fiabilidad y dimensionalidad. Este artículo, propone una escala que cumpla estas condiciones, para medir de manera óptima la calidad del servicio que los Centros de Atención Secundaria ofrecen a sus pacientes. Para lograr este objetivo, se aplicó una encuesta estructurada y posteriormente se realizó un exhaustivo análisis psicométrico de los datos, a través de una serie de análisis exploratorios y confirmatorios que incluyó ecuaciones estructurales. Este estudio permitió construir y proponer una escala fiable, válida y con buen grado de dimensionalidad, compuesta por cinco subescalas claramente relacionadas e integradas en un único constructo. Estas son: confiabilidad, empatía, capacidad de respuesta, accesibilidad y tangibles.

Prescription, dispensation and marketing patterns of methylphenidate

OBJECTIVE To analyze the patterns and legal requirements of methylphenidate consumption. METHODS We conducted a cross-sectional study of the data from prescription notification forms and balance lists of drugs sales – psychoactive and others – subject to special control in the fifth largest city of Brazil, in 2006. We determined the defined and prescribed daily doses, the average prescription and dispensation periods, and the regional sales distribution in the municipality. In addition, we estimated the costs of drug acquisition and analyzed the individual drug consumption profile using the Lorenz curve. RESULTS The balance lists data covered all notified sales of the drug while data from prescription notification forms covered 50.6% of the pharmacies that sold it, including those with the highest sales volumes. Total methylphenidate consumption was 0.37 DDD/1,000 inhabitants/day. Sales were concentrated in more developed areas, and regular-release tablets were the most commonly prescribed pharmaceutical formulation. In some regions of the city, approximately 20.0% of the prescriptions and dispensation exceeded 30 mg/day and 30 days of treatment. CONCLUSIONS Methylphenidate was widely consumed in the municipality and mainly in the most developed areas. Of note, the consumption of formulations with the higher abuse risk was the most predominant. Both its prescription and dispensation contrasted with current pharmacotherapeutic recommendations and legal requirements. Therefore, the commercialization of methylphenidate should be monitored more closely, and its use in the treatment of behavioral changes of psychological disorders needs to be discussed in detail, in line with the concepts of the quality use of medicines.

Visible range plasmonic effect produced by aluminium nanoparticles embedded in amorphous silicon

We present results, obtained by means of an analytic study and a numerical simulation, about the resonant condition necessary to produce a Localized Surface Plasmonic Resonance (LSPR) effect at the surface of metal nanospheres embedded in an amorphous silicon matrix. The study is based on a Lorentz dispersive model for a-Si:H permittivity and a Drude model for the metals. Considering the absorption spectra of a-Si:H, the best choice for the metal nanoparticles appears to be aluminium, indium or magnesium. No difference has been observed when considering a-SiC:H. Finite-difference time-domain (FDTD) simulation of an Al nanosphere embedded into an amorphous silicon matrix shows an increased scattering radius and the presence of LSPR induced by the metal/semiconductor interaction under green light (560 nm) illumination. Further results include the effect of the nanoparticles shape (nano-ellipsoids) in controlling the wavelength suitable to produce LSPR. It has been shown that is possible to produce LSPR in the red part of the visible spectrum (the most critical for a-Si:H solar cells applications in terms of light absorption enhancement) with aluminium nano-ellipsoids. As an additional results we may conclude that the double Lorentz-Lorenz model for the optical functions of a-Si:H is numerically stable in 3D simulations and can be used safely in the FDTD algorithm. A further simulation study is directed to determine an optimal spatial distribution of Al nanoparticles, with variable shapes, capable to enhance light absorption in the red part of the visible spectrum, exploiting light trapping and plasmonic effects. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Models for pheromone evaluation in Ant Systems for Mobile Ad-hoc networks

On a mobile ad-hoc network environment, where the resources are scarce, the knowledge about the network's link state is essential to optimize the routing procedures. This paper presents a study about different pheromone evaluation models and how they react to possible changes in traffic rate. Observing how the pheromone value on a link changes, it could be possible to identify certain patterns which can indicate the path status. For this study, the behavior of the Ant System evaluation model was compared with a Temporal Active Pheromone model (a biological approach) and a Progressive Pheromone Reduction model with and without a maximum pheromone limit.

Impact of sensor nodes scaling and velocity on handover mechanisms for healthcare wireless sensor networks with mobility support

Health promotion in hospital environments can be improved using the most recent information and communication technologies. The Internet connectivity to small sensor nodes carried by patients allows remote access to their bio-signals. To promote these features the healthcare wireless sensor networks (HWSN) are used. In these networks mobility support is a key issue in order to keep patients under realtime monitoring even when they move around. To keep sensors connected to the network, they should change their access points of attachment when patients move to a new coverage area along an infirmary. This process, called handover, is responsible for continuous network connectivity to the sensors. This paper presents a detailed performance evaluation study considering three handover mechanisms for healthcare scenarios (Hand4MAC, RSSI-based, and Backbone-based). The study was performed by simulation using several scenarios with different number of sensors and different moving velocities of sensor nodes. The results show that Hand4MAC is the best solution to guarantee almost continuous connectivity to sensor nodes with less energy consumption.