Mechanical Behavior of the Lamellar Structure in Semi-Crystalline Polymers

We have employed molecular dynamics simulations to study the behavior of virtual polymeric materials under an applied uniaxial tensile load. Through computer simulations, one can obtain experimentally inaccessible information about phenomena taking place at the molecular and microscopic levels. Not only can the global material response be monitored and characterized along time, but the response of macromolecular chains can be followed independently if desired. The computer-generated materials were created by emulating the step-wise polymerization, resulting in self-avoiding chains in 3D with controlled degree of orientation along a certain axis. These materials represent a simplified model of the lamellar structure of semi-crystalline polymers,being comprised of an amorphous region surrounded by two crystalline lamellar regions. For the simulations, a series of materials were created, varying i) the lamella thickness, ii) the amorphous region thickness, iii) the preferential chain orientation, and iv) the degree of packing of the amorphous region. Simulation results indicate that the lamella thickness has the strongest influence on the mechanical properties of the lamella-amorphous structure, which is in agreement with experimental data. The other morphological parameters also affect the mechanical response, but to a smaller degree. This research follows previous simulation work on the crack formation and propagation phenomena, deformation mechanisms at the nanoscale, and the influence of the loading conditions on the material response. Computer simulations can improve the fundamental understanding about the phenomena responsible for the behavior of polymeric materials, and will eventually lead to the design of knowledge-based materials with improved properties.

Chemical sterilization in in vitro propagation of Arundina bambusifolia Lindl. and Epidendrum ibaguense Kunth

There is a great demand for simpler and less costly laboratory techniques and for more accessible procedures for orchid breeders who do not have the necessary theoretical basis to use the traditional seed and clone production methods of orchids in vitro. The aim of this study was to assess the use of sodium hypochlorite (NaClO) as a decontaminant in the process of inoculating adult orchid explants of Arundina bambusifolia and Epidendrum ibaguenses. Solutions of NaClO (1.200, 2.400, 3.600, 4.800 and 6.000 mg L-1 - equivalent to 50, 100, 150, 200 and 250 mL L-1 of commercial bleach - CB) were sprayed on the explants (1.0 mL) and the culture medium (GB5), in the presence or absence of activated charcoal (2 g L-1). The explants used were nodal segments of field-grown adult plants. The procedures for inoculating the explants were conducted outside the laminar flow chamber (LFC), except for the control treatment (autoclaved medium and explant inoculation inside the LFC). The best results for fresh weight yield, height and number of shoots were obtained using NaClO in solution at 1.200 mg L-1 (equivalent to 50 mL L-1 commercial bleach) with activated charcoal in the culture medium. Fresh weight figures were 1.10 g/jar for Arundina bambusifolia and 0.16 g/jar for Epidendrum ibaguenses. Spraying the NaClO solutions controls the contamination of the culture medium already inoculated with the explants.

Rooting of hardwood cuttings of Roxo de Valinhos fig (Ficus carica L.) with different propagation strategies

The objective of this study was to evaluate the substrate, cuttings collection time, the position and the cutting depth, and the propagation environment on rooting of 'Purple Valinhos' fig tree cuttings in Southwestern Paraná, Brazil. Two experiments were carried out at UTFPR, Câmpus Dois Vizinhos, with hardwoods cuttings from Roxo de Valinhos fig tree. The first experiment used a randomized block design, in 3 x 3 x 2 factorial (substrate x environment x collection time), with four replications of 10 cuttings per plot. The cuttings were collected in the first fifteen days of July and August. The substrates were sand, soil and the mixture of these [1:1 (v / v)]. The environments used were open sky, tunnel with plastic cover and tunnel with half-shade black net cover. The second experiment used a randomized block design, 2 x 2 x 3 factorial (shoot cutting position x soil cover x shoot cutting depth), with four replications of 12 cuttings per plot. In the factor position, the vertically (0 º inclination) and inclined (45 º inclination) shoot cuttings were evaluated. Soil cover was tested with mulching plastic cover or not. The tested depths were 1/3, 1/2 and 2/3 in relation to the total length of the shoot cutting. In both experiments, the following were analyzed: rooting and mortality indices, number of leaves and primary shoots, length of the three largest roots per cutting. It was conclude that, the protected environment with plastic cover on sand as substrate must recommended for the rooting of fig estaca, collecting them in the first half of July. The inclination position and cutting depth of the estaca and the substrate coverage with plastic mulching did not influence the results.

Seqüência de drogas consumidas por usuários de crack e fatores interferentes

OBJETIVO: Identificar, entre usuários de crack, uma progressão no uso de drogas e seus fatores interferentes. MÉTODOS: Utilizou-se metodologia qualitativa para uma investigação mais profunda, considerando o ponto de vista que o entrevistado tem do fenômeno. Foram aplicados entrevistas de longa duração e questionários semi-estruturados. Foi delineada uma amostra intencional, e uma amostragem com critérios foi conseguida. Para atingir a saturação teórica, foram entrevistados 31 usuários ou ex-usuários de crack. RESULTADOS: Foram detectadas duas fases distintas de uso de drogas. A primeira, com drogas lícitas, sendo o cigarro e o álcool as mais citadas pela amostra. Parentes e amigos dos entrevistados foram os incentivadores do consumo, e o motivo alegado para o uso dessas substâncias foi a necessidade de autoconfiança. A idade precoce do consumo e o uso pesado de uma ou ambas as drogas foram determinantes para o início de uma escalada de drogas ilícitas. A maconha foi a primeira droga dessa segunda fase. Uma postura mais ativa na busca da droga como fonte de prazer passou a ser o motivo do consumo. CONCLUSÕES: O estudo revela que a identificação de uma seqüência de drogas parece estar mais associada a fatores externos (pressões de grupo, influência do tráfico etc.) do que à preferência do usuário. Foram identificadas duas progressões diferentes: entre os mais jovens (=30 anos), cuja a escalada começou com o cigarro e/ou álcool e passou pela maconha e cocaína aspirada até o uso de crack; e os mais velhos (>30 anos), que iniciaram o uso de drogas pelo cigarro e/ou álcool, seguido de maconha, medicamentos endovenosos, cocaína aspirada, cocaína endovenosa e, por fim, crack.

Caracterização da cultura de crack na cidade de São Paulo: padrão de uso controlado

OBJETIVO: Caracterizar a situação do uso de crack na cidade de São Paulo, assim como o perfil sociodemográfico de seu usuário. PROCEDIMENTOS METODOLÓGICOS: Estudo qualitativo etnográfico com amostra intencional de usuários (n=45) e ex-usuários de crack (n=17). Os participantes foram recrutados pela técnica de amostragem em cadeias e responderam a uma entrevista semi-estruturada, direcionada por questionário, durante os anos de 2004 e 2005. O conjunto de cada questão e suas respectivas respostas originou relatórios específicos que foram interpretados individualmente. ANÁLISE DOS RESULTADOS: O perfil predominante do usuário de crack foi ser homem, jovem, solteiro, de baixa classe socioeconômica, baixo nível de escolaridade e sem vínculos empregatícios formais. O padrão de uso mais freqüentemente citado foi o compulsivo, caracterizado pelo uso múltiplo de drogas e desenvolvimento de atividades ilícitas em troca de crack ou dinheiro. Entretanto, identificou-se o uso controlado que consiste no uso não-diário de crack, mediado por fatores individuais, desenvolvidos intuitivamente pelo usuário e semelhantes, em natureza, às estratégias adotadas por ex-usuários para o alcance do estado de abstinência. CONCLUSÕES: A cultura do uso de crack tem sofrido mudanças quanto ao padrão de uso. Embora a maioria dos usuários o faça de forma compulsiva, observou-se a existência do uso controlado, que merece maior detalhamento, principalmente quanto às estratégias adotadas para seu alcance.

HIV/AIDS risk among female sex workers who use crack in Southern Brazil

OBJECTIVE: To understand the social context of female sex workers who use crack and its impact on HIV/AIDS risk behaviors. METHODODOLOGICAL PROCEDURES: Qualitative study carried out in Foz do Iguaçu, Southern Brazil, in 2003. Twenty-six in-depth interviews and two focus groups were carried out with female commercial sex workers who frequently use crack. In-depth interviews with health providers, community leaders and public policy managers, as well as field observations were also conducted. Transcript data was entered into Atlas.ti software and grounded theory methodology was used to analyze the data and develop a conceptual model as a result of this study. ANALYSIS OF RESULTS: Female sex workers who use crack had low self-perceived HIV risk in spite of being engaged in risky behaviors (e.g. unprotected sex with multiple partners). Physical and sexual violence among clients, occasional and stable partners was widespread jeopardizing negotiation and consistent condom use. According to health providers, community leaders and public policy managers, several female sex workers who use crack are homeless or live in slums, and rarely have access to health services, voluntary counseling and testing, social support, pre-natal and reproductive care. CONCLUSIONS: Female sex workers who use crack experience a plethora of health and social problems, which apparently affect their risks for HIV infection. Low-threshold, user-friendly and gender-tailored interventions should be implemented, in order to increase the access to health and social-support services among this population. Those initiatives might also increase their access to reproductive health in general, and to preventive strategies focusing on HIV/AIDS and other sexually transmitted infections.

Futuros sobre a margem operacional da refinação do petróleo bruto: crack spreads

Mestrado em Contabilidade Internacional

Evolução do consumo de crack em coorte com histórico de tratamento

OBJETIVO: Analisar a evolução do consumo entre usuários de crack com histórico de tratamento. MÉTODOS: Uma coorte de, originalmente, 131 dependentes de crack admitidos em uma enfermaria de desintoxicação em São Paulo, SP, entre 1992 e 1994, foi re-entrevistada em três ocasiões: 1995-1996, 1998-1999 e 2005-2006. As variáveis averiguadas foram: dados demográficos, comportamento sexual de risco, padrões de consumo de crack e outras substâncias, prisões, desaparecimentos e óbitos. Na análise estatística empregou-se o teste de qui-quadrado, a regressão logística multinomial e regressão de Cox. RESULTADOS: Dos pacientes avaliados, 43 estavam abstinentes do crack (12 meses ou mais), 22 eram usuários, 13 estavam presos, dois desaparecidos e 27 estavam mortos. Foram identificados três grupos com trajetórias distintas de consumo pós-alta. Comportamento seguro com uso de preservativo foi identificado como fator relacionado ao grupo de abstinentes estáveis (p = 0,001). Teste HIV positivo na internação (p = 0,046); consumo de cocaína aspirada no último ano (p = 0,001) e tempo de uso de cocaína aspirada na vida (mais de 132 meses) (p = 0,000) foram fatores relacionados a uso de longo termo. Uso pregresso de cocaína endovenosa aumentou em 2,5 vezes as chances de óbito em 12 anos (p = 0,031) (IC95%: 1,08; 5,79). CONCLUSÕES: A recorrência e persistência do consumo nos anos pós-alta de tratamento refletem novas modalidades de uso do crack. Por outro lado, padrões de abstinência estável apontam a viabilidade dos processos de recuperação relativos ao uso de crack.

Fissura por crack: comportamentos e estratégias de controle de usuários e ex-usuários

OBJETIVO: Compreender a fissura do usuário de crack, bem como descrever os comportamentos desenvolvidos sob fissura e estratégias utilizadas para seu controle. PROCEDIMENTOS METODOLÓGICOS: Estudo qualitativo com amostra intencional por critérios de 40 usuários e ex-usuários de crack em São Paulo, SP, nos anos de 2007 e 2008. Os entrevistados foram recrutados pela técnica da bola de neve e submetidos à entrevista semi-estruturada em profundidade, até a saturação teórica. Após transcrição literal, seguiu-se a análise do conteúdo das entrevistas para elaboração de inferências e hipóteses alicerçadas nessas narrativas. ANÁLISE DOS RESULTADOS: Os entrevistados estavam igualmente distribuídos quanto ao sexo, possuíam idade entre 18 e 50 anos, abrangeram todos os níveis de escolaridade e a maior parte possuía poucos recursos financeiros. Além da fissura sentida na abstinência de crack e da fissura induzida por pistas ambientais e emocionais, constatou-se um tipo de fissura que faz parte do próprio efeito do crack. Esta última apareceu como forte fator mantenedor dos binges de consumo, que foram os maiores responsáveis pelo rebaixamento de valores do usuário, sujeitando-o a práticas arriscadas para a obtenção da droga. Os métodos mais citados para a obtenção de crack ou dinheiro para comprá-lo foram: prostituição, manipulação de pessoas, endividamento, troca de pertences por crack e roubo. Foram relatadas estratégias para o alívio da fissura e táticas farmacológicas e comportamentais para evitar o seu desenvolvimento, como: comer, ter relação sexual, jogar futebol, trabalhar, evitar o contexto social de uso de crack e usar drogas que causam sonolência. CONCLUSÕES: Os binges de consumo de crack são causados pela fissura induzida durante o uso da droga. As medidas criadas pelo próprio usuário para lidar com a sua fissura melhoram sua relação com o crack e podem ser ferramenta importante para o aprimoramento do tratamento.

From local to global importance measures of uncertainty propagation in composite structures

The influence of uncertainties of input parameters on output response of composite structures is investigated in this paper. In particular, the effects of deviations in mechanical properties, ply angles, ply thickness and on applied loads are studied. The uncertainty propagation and the importance measure of input parameters are analysed using three different approaches: a first-order local method, a Global Sensitivity Analysis (GSA) supported by a variance-based method and an extension of local variance to estimate the global variance over the domain of inputs. Sample results are shown for a shell composite laminated structure built with different composite systems including multi-materials. The importance measures of input parameters on structural response based on numerical results are established and discussed as a function of the anisotropy of composite materials. Needs for global variance methods are discussed by comparing the results obtained from different proposed methodologies. The objective of this paper is to contribute for the use of GSA techniques together with low expensive local importance measures.

Uncertainty propagation in inverse reliability-based design of composite structures

An approach for the analysis of uncertainty propagation in reliability-based design optimization of composite laminate structures is presented. Using the Uniform Design Method (UDM), a set of design points is generated over a domain centered on the mean reference values of the random variables. A methodology based on inverse optimal design of composite structures to achieve a specified reliability level is proposed, and the corresponding maximum load is outlined as a function of ply angle. Using the generated UDM design points as input/output patterns, an Artificial Neural Network (ANN) is developed based on an evolutionary learning process. Then, a Monte Carlo simulation using ANN development is performed to simulate the behavior of the critical Tsai number, structural reliability index, and their relative sensitivities as a function of the ply angle of laminates. The results are generated for uniformly distributed random variables on a domain centered on mean values. The statistical analysis of the results enables the study of the variability of the reliability index and its sensitivity relative to the ply angle. Numerical examples showing the utility of the approach for robust design of angle-ply laminates are presented.

A VLF to UHF propagation model for evaluation of high-speed railway electromagnetic interference in RF monitoring base-stations

Considering that recent european high-speed railway system has a traction power system of kV 50 Hz, which causes electromagnetic emission for the outside world, it is important to dimension the railway system emissions, using a frequency/distance dependent propagation model. This paper presents an enhanced theoretical model for VLF to UHF propagation, railway system oriented. It introduces the near field approach (crucial in low frequency propagation) and also considers the source characteristics and type of measuring antenna. Simulations are presented, and comparisons are set with earlier far field models. Using the developed model, a real case study was performed in partnership with Refer Telecom (portuguese telecom operator for railways). The new propagation model was used in order to predict the future high-speed railway electromagnetic emissions in the Lisbon north track. The results show the model's prediction capabilities and also its applicability to realistic scenarios.

Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining

An experimental and Finite Element study was performed on the bending behaviour of wood beams of the Pinus Pinaster species repaired with adhesively-bonded carbon–epoxy patches, after sustaining damage by cross-grain failure. This damage is characterized by crack growth at a small angle to the beams longitudinal axis, due to misalignment between the wood fibres and the beam axis. Cross-grain failure can occur in large-scale in a wood member when trees that have grown spirally or with a pronounced taper are cut for lumber. Three patch lengths were tested. The simulations include the possibility of cohesive fracture of the adhesive layer, failure within the wood beam in two propagation planes and patch interlaminar failure, by the use of cohesive zone modelling. The respective cohesive properties were estimated either by an inverse method or from the literature. The comparison with the tests allowed the validation of the proposed methodology, opening a good perspective for the reduction of costs in the design stages of these repairs due to extensive experimentation.

Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches

In this work, a repair technique with adhesively bonded carbon-epoxy patches is proposed for wood members damaged by horizontal shear and under bending loads. This damage is characterized by horizontal crack growth near the neutral plane of the wood beam, normally originating from checks and shakes. The repair consists of adhesively bonded carbon-epoxy patches on the vertical side faces of the beam at the cracked region to block sliding between the beam arms. An experimental and numerical parametric analysis was performed on the patch length. The numerical analysis used the finite element method (FEM) and cohesive zone models (CZMs), with an inverse modelling technique for the characterization of the adhesive layer. Trapezoidal cohesive laws in each pure mode were used to account for the ductility of the adhesive used. To fully reproduce the tests, horizontal damage propagation within the wood beam was also simulated. A good correlation with the experiments was found. Regarding the effectiveness of the repair, for the conditions selected for this work, a full strength recovery was achieved for the bigger value of patch length tested.

Halting the fuse discharge propagation using optical fiber microwires

We report and analyze the halting of the fuse effect propagation in optical fiber microwires. The increase of the mode field diameter in the tapered region decreases the optical intensity resulting in the extinction of the fuse effect. This fiber element presents a low insertion loss and can be introduced in the optical network in order to protect the active equipment from the damage caused by the fuse effect.