Vase Life of New Tropical Cut Foliage: Cordyline terminalis

Cordyline terminalis is a tropical ornamental with high decorative value due its variety of colors and foliar patterns. This ornamental is new in the Brazilian market and has large potential to be exported. The lack of studies on postharvest aspects is a problem for new crops, and the development of good post-production techniques can reduce costs due to loss of unsalable, damaged plants. The present work aimed to characterize the vase life of red and green cultivars of C. terminalis. Conservation techniques, such as pulsing with gibberellic acid (GA(3)), wax spray, and cold storage for 10 and 20 days at 5, 10, and 13 degrees C were tested. Also, macro-and micronutrients concentration was tracked during the senescence process. In the water-based treatment (control), both cultivars had a vase life of 21 days. Vase life was not influenced by wax spray, GA pulsing, or cold storage for 10 days at 5, 10 or 13 degrees C. In both cultivars, the postharvest techniques used did not improve the vase life on this species. on the other hand, by cold storing the foliage for 20 days in any of the tested temperatures, the vase life was shortened one week, with a total of 14 days longevity compared with all other treatments. Color changes were not correlated with senescence of the foliage. Nutrients did not change during the evaluation period. C. terminalis had a vase life long enough for export, supported by cold storage up to 10 days, which did not shorten the vase life.

PENNSYLVANIAN HETEROCONCHIA (MOLLUSCA, BIVALVIA) FROM THE PIAUI FORMATION, PARNAIBA BASIN, BRAZIL

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preferência de Apanteles galleriae Wilkinson (Hymenoptera: Braconidae) por Galleria mellonella (L.) ou Achroia grisella (Fabricius) (Lepidoptera: Pyralidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Capacidade reprodutiva de fêmeas de Apanteles galleriae (Hymenoptera, Braconidae) em lagartas de Galleria mellonella e Achroia grisella (Lepidoptera, Pyralidae) criadas com dietas diferentes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tegumentary epithelial glands in the abdomen of virgin and physogastric queens of the stingless bee Scaptotrigona postica Latreille (Meliponini: Trigonina)

Nas operárias das abelhas eussociais, regiões do epitélio tegumentar do abdome podem hipertrofiar-se e tornarem-se glandulares, sendo responsáveis pela produção de cera usada na contrução dos alvéolos de cria. Nos meliponíneos, epitélio com essas características também foi observado nas rainhas, porém sua função ainda continua desconhecida. Teria esse epitélio função homóloga nas operárias? As rainhas, além da função reprodutiva, desempenhariam funções na colônia até então consideradas exclusivas das operárias? Para tentar colaborar no esclarecimento dessas questões realizou-se um estudo histológico e ultra-estrutural das glândulas epiteliais tegumentares do terceiro tergito em rainhas virgens e fisogástricas de Scaptotrigona postica Latreille. Os resultados morfológicos mostraram que o epitélio glandular existe e é facilmente discernível no terceiro tergito das rainhas, sendo muito mais desenvolvido nas fisogástricas do que nas virgens. A ultra-estrutura mostrou que há diferenças no tipo de organização do retículo endoplasmático liso entre as rainhas, o que, juntamente com os resultados da histologia e morfometria, indicam poder haver diferenças funcionais desse epitélio entre elas. Como já observado na literatura, nas rainhas virgens tal epitélio pode estar envolvido na produção de cera e confecção de alvéolos de cria, porém sua função nas rainhas fisogástricas é totalmente desconhecida. A hipótese lançada no presente estudo é de que esse epitélio pode estar envolvido na produção de feromônios que irão atuar nas interações sociais da rainha poedeira.

Morphologic and morphometric aspects of oenocytes of Apis mellifera queens and workers in different phases of life

Oenocytes of adult workers and queens of Apis mellifera L. were studied in different ages or life stages, by means of morphometric and histologic techniques. In workers, the oenocytes were found in the head, near the mandibles and in the abdomen, immersed in the parietal fat body mainly below the sterna, close to the wax gland. In queens, two populations of oenocytes different in size and localization were found within the parietal and visceral fat body, respectively. The oenocytes of workers and queens show the presence of acid lipids and acid phosphatase. The role of these cells in the castes differences is discussed.

Leaf structure of the cerrado (Brazilian savanna) woody plants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Shear bond strength of a ceramic to Co-Cr alloys

Statement of problem. Different combinations of Co-Cr alloys bonded to ceramic have been used in dentistry; however, the bond strength of ceramic to metal can vary because of different compositions of these alloys.Purpose. The purpose of this study was to evaluate the shear bond strength of a dental ceramic to 5 commercially available Co-Cr alloys.Material and methods. Five Co-Cr alloys (IPS d.SIGN 20, IPS d.SIGN 30, Remanium 2000, Heranium P, and Wirobond C) were tested and compared to a control group of an Au-Pd alloy (Olympia). Specimen disks, 5 mm high and 4 mm in diameter, were fabricated with the lost-wax technique. Sixty specimens were prepared using opaque and dentin ceramics (VITA Omega 900), veneered, 4 mm high and 4 mm in diameter, over the metal specimens (n = 10). The shear bond strength test was performed in a universal testing machine with a crosshead speed of 0.5 mm/min. After shear bond testing, fracture surfaces were evaluated in a stereomicroscope under x25 magnification. Ultimate shear bond strength (MPa) data were analyzed with 1-way ANOVA and the Tukey HSD test (alpha = .05).Results. The mean (SID) bond strengths (MPa) were: 61.4 (7.8) for Olympia; 94.0 (18.9) for IPS 20; 96.8 (10.2) for I PS 30; 75.1 (12.4) for Remanium; 71.2 (14.3) for Heranium P; and 63.2 (10.9) for Wirobond C. Mean bond strengths for IPS 20 and IPS 30 were not significantly different, but were significantly (P<.001) higher than mean bond strengths for the other 4 alloys, which were not significantly different from each other.Conclusions. Bond strength of a dental ceramic to a Co-Cr alloy is dependent on the alloy composition.

Machined and plastic copings in three-element prostheses with different types of implant-abutment joints: a strain gauge comparative analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Straight and Offset Implant Placement under Axial and Nonaxial Loads in Implant-Supported Prostheses: Strain Gauge Analysis

Purpose: The aim of this in vitro study was to quantify strain development during axial and nonaxial loading using strain gauge analysis for three-element implant-supported FPDs, varying the arrangement of implants: straight line (L) and offset (O). Materials and Methods: Three Morse taper implants arranged in a straight line and three implants arranged in an offset configuration were inserted into two polyurethane blocks. Microunit abutments were screwed onto the implants, applying a 20 Ncm torque. Plastic copings were screwed onto the abutments, which received standard wax patterns cast in Co-Cr alloy (n = 10). Four strain gauges were bonded onto the surface of each block tangential to the implants. The occlusal screws of the superstructure were tightened onto microunit abutments using 10 Ncm and then axial and nonaxial loading of 30 Kg was applied for 10 seconds on the center of each implant and at 1 and 2 mm from the implants, totaling nine load application points. The microdeformations determined at the nine points were recorded by four strain gauges, and the same procedure was performed for all of the frameworks. Three loadings were made per load application point. The magnitude of microstrain on each strain gauge was recorded in units of microstrain (mu). The data were analyzed statistically by two-way ANOVA and Tukey's test (p < 0.05). Results: The configuration factor was statistically significant (p= 0.0004), but the load factor (p= 0.2420) and the interaction between the two factors were not significant (p= 0.5494). Tukey's test revealed differences between axial offset (mu) (183.2 +/- 93.64) and axial straight line (285.3 +/- 61.04) and differences between nonaxial 1 mm offset (201.0 +/- 50.24) and nonaxial 1 mm straight line (315.8 +/- 59.28). Conclusion: There was evidence that offset placement is capable of reducing the strain around an implant. In addition, the type of loading, axial force or nonaxial, did not have an influence until 2 mm.

Antioxidant activity, ascorbic acid and total phenol of exotic fruits occurring in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização anatômica e química de folhas de Jacaranda puberula (Bignoniaceae) presente na Mata Atlântica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification of triterpenes and sterols from pterogyne nitens (fabaceae-caesalpinioideae) using high-resolution gas chromatography

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Response of cattleya hybrids for Fusarium oxysporum f. sp. cattleyae Foster

The Cattleya genus has a great importance in the flower agro-business market. Fusarium wilts, caused by Fusarium oxysporum f. sp. cattleyae, is considered one of the main factors of decline and death of plants of this genus. Using seven hybrids (intra and intergenerics) of Cattleya, tests of resistance and susceptibility to F. oxysporum were performed in conditions of greenhouse for 12 months, using, as evaluation criterion, a scale of the disease severity ranging from one (resistant) to eight (highly susceptible). High susceptibility to the fungus by Cattleya Nobile's Wax Toy, Cattleya Orquidacea's Mister Fast intrageneric hybrids and Potinara Orquidacea's Havana Brown intergeneric hybrid, related to Brassocattleya Orquidacea's Melody intergeneric hybrid, high resistance to the pathogens was observed.

Análise histoquímica foliar do amendoim: genótipos 'Tatu' e SO-909

Este trabalho teve por finalidade a análise histoquímica foliar de dois genótipos de amendoim (Arachis hypogaea L.), do tipo botânico Valência: SO-53 ('Tatu') e SO-909 (PI-259747), cuja literatura demonstra apresentarem respostas diferentes de resistência às principais moléstias fúngicas foliares do Brasil. Seções transversais das seguintes estruturas - pulvino, haste peciolar, raque, pulvínulo e folíolo - e seções paradérmicas de folíolos coletados em dois anos agrícolas consecutivos, foram analisadas quanto à presença de alcalóides, amido, calose, celulose pura, celulose com pectina, cera, cristais, cutina, lignina, mucilagem, óleo, resina, tanino e ureídeos (micrograma) por folíolo (grama). As diferenças qualitativas histoquímicas observadas nos diversos tecidos, como a freqüência de tanino, alcalóide, pectina e óleo, supostamente, podem ser responsáveis pela resistência ou suscetibilidade dos genótipos às moléstias fúngicas foliares. Para fins de caracterização, mostrou-se eficiente a avaliação de pureza de celulose.