Conceptions of learning held by upper primary children in government schools in Brunei Darussalam

The current study examined the conceptions of learning held by upper primary children in government schools in Brunei. Previous studies have shown that the conceptions of learning held by students influence the ways in which they approach learning tasks and, in turn, impact on their learning outcomes. However, the majority of these studies were carried out with university and secondary school students, with little research involving primary school children. A phenomenographic research approach was used to describe the qualitatively different ways in which a group of sixteen upper primary children experienced learning in two government schools in Brunei. Data were gathered using scenariobased semi]structured interviews. Iterative cycles of analysis revealed three categories of description depicting three qualitatively different ways in which the children experienced the phenomenon. The three categories of description were: learning as acquiring information (Category 1), learning as remembering information (Category 2) and learning as doing hands]on activities (Category 3). These categories indicate a variation in the ways in which upper primary children experience learning in government schools in Brunei. The conceptions of learning held by the children provide a platform from which educators and policy]makers can consider possibilities for meaningful learning in government schools in Brunei.

Assessment of architectural work experience by employers and students

A major element in the architectural work experience program at Queensland University of Technology is the assessment reports provided by students and employers. This paper gives an analysis of assessments submitted during the period 2000 to 2007 as viewed from a practice-base perspective. By comparing the 398 student assessments with 403 employer assessments in five specific categories over an eight year period one is able to obtain a clear understanding of the performance of the program and the relevance of its various sections for its participants that is not always obvious in a yearly analysis. In the major work experience areas there is close agreement between the student and employer assessments. However, the analysis did highlight a misunderstanding of the program’s aims by some participants. Overall the students were very positive about the program and appreciated the opportunity to work on real projects and be given a degree of responsibility for these projects. For Work Integrated Learning (WIL) practitioners this study clearly demonstrates the value of obtaining assessments from students and employers in order to establish the acceptance of a WIL program.

The creative sector in New Zealand : mapping and economic role : report to New Zealand Trade and Enterprise

The New Zealand creative sector was responsible for almost 121,000 jobs at the time of the 2006 Census (6.3% of total employment). These are divided between • 35,751 creative specialists – persons employed doing creative work in creative industries • 42,300 support workers - persons providing management and support services in creative industries • 42,792 embedded creative workers – persons engaged in creative work in other types of enterprise The most striking feature of this breakdown is the fact that the largest group of creative workers are employed outside the creative industries, i.e. in other types of businesses. Even within the creative industries, there are fewer people directly engaged in creative work than in providing management and support. Creative sector employees earned incomes of approximately $52,000 per annum at the time of the 2006 Census. This is relatively uniform across all three types of creative worker, and is significantly above the average for all employed persons (of approximately $40,700). Creative employment and incomes were growing strongly over both five year periods between the 1996, 2001 and 2006 Censuses. However, when we compare creative and general trends, we see two distinct phases in the development of the creative sector: • rapid structural growth over the five years to 2001 (especially led by developments in ICT), with creative employment and incomes increasing rapidly at a time when they were growing modestly across the whole economy; • subsequent consolidation, with growth driven by more by national economic expansion than structural change, and creative employment and incomes moving in parallel with strong economy-wide growth. Other important trends revealed by the data are that • the strongest growth during the decade was in embedded creative workers, especially over the first five years. The weakest growth was in creative specialists, with support workers in creative industries in the middle rank, • by far the strongest growth in creative industries’ employment was in Software & digital content, which trebled in size over the decade Comparing New Zealand with the United Kingdom and Australia, the two southern hemisphere nations have significantly lower proportions of total employment in the creative sector (both in creative industries and embedded employment). New Zealand’s and Australia’s creative shares in 2001 were similar (5.4% each), but in the following five years, our share has expanded (to 5.7%) whereas Australia’s fell slightly (to 5.2%) – in both cases, through changes in creative industries’ employment. The creative industries generated $10.5 billion in total gross output in the March 2006 year. Resulting from this was value added totalling $5.1b, representing 3.3% of New Zealand’s total GDP. Overall, value added in the creative industries represents 49% of industry gross output, which is higher than the average across the whole economy, 45%. This is a reflection of the relatively high labour intensity and high earnings of the creative industries. Industries which have an above-average ratio of value added to gross output are usually labour-intensive, especially when wages and salaries are above average. This is true for Software & Digital Content and Architecture, Design & Visual Arts, with ratios of 60.4% and 55.2% respectively. However there is significant variation in this ratio between different parts of the creative industries, with some parts (e.g. Software & Digital Content and Architecture, Design & Visual Arts) generating even higher value added relative to output, and others (e.g. TV & Radio, Publishing and Music & Performing Arts) less, because of high capital intensity and import content. When we take into account the impact of the creative industries’ demand for goods and services from its suppliers and consumption spending from incomes earned, we estimate that there is an addition to economic activity of: • $30.9 billion in gross output, $41.4b in total • $15.1b in value added, $20.3b in total • 158,100 people employed, 234,600 in total The total economic impact of the creative industries is approximately four times their direct output and value added, and three times their direct employment. Their effect on output and value added is roughly in line with the average over all industries, although the effect on employment is significantly lower. This is because of the relatively high labour intensity (and high earnings) of the creative industries, which generate below-average demand from suppliers, but normal levels of demand though expenditure from incomes. Drawing on these numbers and conclusions, we suggest some (slightly speculative) directions for future research. The goal is to better understand the contribution the creative sector makes to productivity growth; in particular, the distinctive contributions from creative firms and embedded creative workers. The ideas for future research can be organised into the several categories: • Understanding the categories of the creative sector– who is doing the business? In other words, examine via more fine grained research (at a firm level perhaps) just what is the creative contribution from the different aspects of the creative sector industries. It may be possible to categorise these in terms of more or less striking innovations. • Investigate the relationship between the characteristics and the performance of the various creative industries/ sectors; • Look more closely at innovation at an industry level e.g. using an index of relative growth of exports, and see if this can be related to intensity of use of creative inputs; • Undertake case studies of the creative sector; • Undertake case studies of the embedded contribution to growth in the firms and industries that employ them, by examining taking several high performing noncreative industries (in the same way as proposed for the creative sector). • Look at the aggregates – drawing on the broad picture of the extent of the numbers of creative workers embedded within the different industries, consider the extent to which these might explain aspects of the industries’ varied performance in terms of exports, growth and so on. • This might be able to extended to examine issues like the type of creative workers that are most effective when embedded, or test the hypothesis that each industry has its own particular requirements for embedded creative workers that overwhelms any generic contributions from say design, or IT.

Object tracking using multiple motion modalities

This paper presents an object tracking system that utilises a hybrid multi-layer motion segmentation and optical flow algorithm. While many tracking systems seek to combine multiple modalities such as motion and depth or multiple inputs within a fusion system to improve tracking robustness, current systems have avoided the combination of motion and optical flow. This combination allows the use of multiple modes within the object detection stage. Consequently, different categories of objects, within motion or stationary, can be effectively detected utilising either optical flow, static foreground or active foreground information. The proposed system is evaluated using the ETISEO database and evaluation metrics and compared to a baseline system utilising a single mode foreground segmentation technique. Results demonstrate a significant improvement in tracking results can be made through the incorporation of the additional motion information.

Co-creative labour

This article introduces a special issue on the topic of co-creative labour. The term co-creation is used to describe the phenomenon of consumers increasingly participating in the process of making and circulating media content and experiences. Practices of user-created content and user-led innovation are now significant sources of both economic and cultural value. But how should we understand and analyse these value-generating activities? What are the identities and forms of agency that constitute these emerging co-creative relations? Should we define these activities as a form of labour and what are the implications and impacts of co-creative practices on the employment conditions and professional identities of people working in the creative industries? In answering these questions we argue that careful attention must be paid to how the participants themselves (both professional and non-professional, commercial and non-commercial) negotiate and navigate the meanings and possibilities of these emerging co-creative relationships for mutual benefit. Co-Creative media production is perhaps a disruptive agent of change that sits uncomfortably with our current understandings and theories of work and labour. The articles in this special issue follow and unpack the often diverse and contradictory ways in which the participants themselves use and remake the social categories of work and labour as they seek to co-ordinate and contest co-creative media practices.

Queer

The word “queer” is a slippery one; its etymology is uncertain, and academic and popular usage attributes conflicting meanings to the word. By the mid-nineteenth century, “queer” was used as a pejorative term for a (male) homosexual. This negative connotation continues when it becomes a term for homophobic abuse. In recent years, “queer” has taken on additional uses: as an all encompassing term for culturally marginalised sexualities – gay, lesbian, trans, bi, and intersex (“GLBTI”) – and as a theoretical strategy which deconstructs binary oppositions that govern identity formation. Tracing its history, the Oxford English Dictionary notes that the earliest references to “queer” may have appeared in the sixteenth century. These early examples of queer carried negative connotations such as “vulgar,” “bad,” “worthless,” “strange,” or “odd” and such associations continued until the mid-twentieth century. The early nineteenth century, and perhaps earlier, employed “queer” as a verb, meaning to “to put out of order,” “to spoil”, “to interfere with”. The adjectival form also began to emerge during this time to refer to a person’s condition as being “not normal,” “out of sorts” or to cause a person “to feel queer” meaning “to disconcert, perturb, unsettle.” According to Eve Sedgwick (1993), “the word ‘queer’ itself means across – it comes from the Indo-European root – twerkw, which also yields the German quer (traverse), Latin torquere (to twist), English athwart . . . it is relational and strange.” Despite the gaps in the lineage and changes in usage, meaning and grammatical form, “queer” as a political and theoretical strategy has benefited from its diverse origins. It refuses to settle comfortably into a single classification, preferring instead to traverse several categories that would otherwise attempt to stabilise notions of chromosomal sex, gender and sexuality.

Demographic category membership and leadership in small groups : a social identity analysis

Developing the social identity theory of leadership (e.g., [Hogg, M. A. (2001). A social identity theory of leadership. Personality and Social Psychology Review, 5, 184–200]), an experiment (N=257) tested the hypothesis that as group members identify more strongly with their group (salience) their evaluations of leadership effectiveness become more strongly influenced by the extent to which their demographic stereotype-based impressions of their leader match the norm of the group (prototypicality). Participants, with more or less traditional gender attitudes (orientation), were members, under high or low group salience conditions (salience), of non-interactive laboratory groups that had “instrumental” or “expressive” group norms (norm), and a male or female leader (leader gender). As predicted, these four variables interacted significantly to affect perceptions of leadership effectiveness. Reconfiguration of the eight conditions formed by orientation, norm and leader gender produced a single prototypicality variable. Irrespective of participant gender, prototypical leaders were considered more effective in high then low salience groups, and in high salience groups prototypical leaders were more effective than less prototypical leaders. Alternative explanations based on status characteristics and role incongruity theory do not account well for the findings. Implications of these results for the glass ceiling effect and for a wider social identity analysis of the impact of demographic group membership on leadership in small groups are discussed.

Knowledge is not power, but it’s a start : young people and employment entitlements

This paper employs empirical evidence from a survey of Queensland secondary school students to examine their knowledge about their wages and working conditions. It does so within the theoretical lens of the Gagne (or Gagne-Briggs) theory of instruction, which centres on the content of learning and how learning is acquired (Gagne, Briggs & Wager, 1988). While Gagne articulates five categories of learning, our focus here is on two; verbal information or declarative knowledge (facts that people can declare), and procedural knowledge (the rules and procedures for achieving outcomes). We show that student workers know little about the instruments governing their employment, or their workplace entitlements. Of the total sample of year 9 and year 11 students surveyed (n=892), those students who worked, or who had worked in the past year (n=438), were asked to identify whether they were employed under an award, collective agreement or AWA. Eighty three per cent of students did not know which industrial instrument set their wages. We argue that if young workers do not have declarative knowledge of their entitlements, nor basic procedural knowledge about redress, then they are not in a position to deploy Gagne’s ‘cognitive strategies’ that would enable them to take action to ensure their working conditions meet legal minima. We advocate that young workers should be given summary information on their wages and other entitlements on appointment and that such summary information should be readily available on employers’ noticeboards and electronically on company websites, and that the information should include a brief summary of avenues for redressing issues of underpayment or sub-standard conditions.

Beyond charity : outlines of a jurisprudence for civil society

There is not a single, coherent, jurisprudence for civil society organisations. Pressure for a clearly enuciated body of law applying to the whole of this sector of society continues to increase. The rise of third sector scholarship, the retreat of the welfare state, the rediscovery of the concept of civil society and pressures to strengthen social capital have all contributed to an ongoing stream of inquiry into the laws that regulate and favour civil society organisations. There have been almost thirty inquiries over the last sixty years into the doctrine of charitable purpose in common law countries. Those inquiries have established that problems with the law applying to civil society organisations are rooted in the common law adopting a ‘technical’ definition of charitable purpose and the failure of this body of law to develop in response to societal changes. Even though it is now well recognised that problems with law reform stem from problems inherent in the doctrine of charitable purpose, statutory reforms have merely ‘bolted on’ additions to the flawed ‘technical’ definition. In this way the scope of operation of the law has been incrementally expanded to include a larger number of civil society organisations. This piecemeal approach continues the exclusion of most civil society organisations from the law of charities discourse, and fails to address the underlying jurisprudential problems. Comprehensive reform requires revisiting the foundational problems embedded in the doctrine of charitable purpose, being informed by recent scholarship, and a paradigm shift that extends the doctrine to include all civil society organisations. Scholarly inquiry into civil society organisations, particularly from within the discipline of neoclassical economics, has elucidated insights that can inform legal theory development. This theory development requires decoupling the two distinct functions performed by the doctrine of charitable purpose which are: setting the scope of regulation, and determining entitlement to favours, such as tax exemption. If the two different functions of the doctrine are considered separately in the light of theoretical insights from other disciplines, the architecture for a jurisprudence emerges that facilitates regulation, but does not necessarily favour all civil society organisations. Informed by that broader discourse it is argued that when determining the scope of regulation, civil society organisations are identified by reference to charitable purposes that are not technically defined. These charitable purposes are in essence purposes which are: Altruistic, for public Benefit, pursued without Coercion. These charitable puposes differentiate civil society organisations from organisations in the three other sectors namely; Business, which is manifest in lack of altruism; Government, which is characterised by coercion; and Family, which is characterised by benefits being private not public. When determining entitlement to favour, it is theorised that it is the extent or nature of the public benefit evident in the pursuit of a charitable purpose that justifies entitlement to favour. Entitlement to favour based on the extent of public benefit is the theoretically simpler – the greater the public benefit the greater the justification for favour. To be entitled to favour based on the nature of a purpose being charitable the purpose must fall within one of three categories developed from the first three heads of Pemsel’s case (the landmark categorisation case on taxation favour). The three categories proposed are: Dealing with Disadvantage, Encouraging Edification; and Facilitating Freedom. In this alternative paradigm a recast doctrine of charitable purpose underpins a jurisprudence for civil society in a way similar to the way contract underpins the jurisprudence for the business sector, the way that freedom from arbitrary coercion underpins the jurisprudence of the government sector and the way that equity within families underpins succession and family law jurisprudence for the family sector. This alternative architecture for the common law, developed from the doctrine of charitable purpose but inclusive of all civil society purposes, is argued to cover the field of the law applying to civil society organisations and warrants its own third space as a body of law between public law and private law in jurisprudence.

Risk management in the Lusoponte concession : a case study of the two bridges in Lisbon, Portugal

The case study of Lusoponte illustrates the concession awarded by the Portuguese Government to finance, design, build and operate two bridges over the Tagus in Lisbon, Portugal. It includes an overview of the project's background and an analysis of the main risk categories stating both the actual risks encountered and the mitigation measures adopted. Throughout the project a great attention was given to whole life cycle costs, and gains in efficiency and cost control. Among the lessons that can be learned from both the public and private sector is that a complete risk management analysis must include not only the technical factors but also a realistic assessment of environmental and social risks. These were the risks that were somewhat overseen and that caused the main problems to the project's development.

Professional Responsibility and Legal Ethics in Queensland

With the commencement of the Legal Profession Act 2007 (Qld) and the establishment of the Legal Services Commission, the legal profession and legal services market in Queensland has experienced significant changes to its regulatory environment. Professional Responsibility and Legal Ethics in Queensland provides a detailed explanation and analysis of these changes. The book will assist lawyers to plan for successful practice within this new environment by examining such topics as: • The scope and application of key provisions within the Legal Profession Act; • The role, functions and policies of the Legal Services Commission; • The ethical and regulatory implications of operating as an Incorporated Legal Practice or as a Multi-Disciplinary Partnership; • Developments affecting trust accounts and client money dealings more generally; • Recent case law, Tribunal decisions and Legal Services Commission guidelines in relation to the new conduct standards of Unsatisfactory Professional Conduct and Professional Misconduct; and • The impact of the new legislation and regulatory environment on a range of traditional ethical duty categories such as the duty to communicate, costs and billing practices, as well as the paramount duties to the court and to the administration of justice. An invaluable reference for legal professionals, this book is also an important resource for law students grappling with questions raised by legal ethics and their application to the workplace.

Addressing issues in sparseness, ecological bias and formulation of the adjacency matrix in Bayesian spatio-temporal analysis of disease counts

The main objective of this PhD was to further develop Bayesian spatio-temporal models (specifically the Conditional Autoregressive (CAR) class of models), for the analysis of sparse disease outcomes such as birth defects. The motivation for the thesis arose from problems encountered when analyzing a large birth defect registry in New South Wales. The specific components and related research objectives of the thesis were developed from gaps in the literature on current formulations of the CAR model, and health service planning requirements. Data from a large probabilistically-linked database from 1990 to 2004, consisting of fields from two separate registries: the Birth Defect Registry (BDR) and Midwives Data Collection (MDC) were used in the analyses in this thesis. The main objective was split into smaller goals. The first goal was to determine how the specification of the neighbourhood weight matrix will affect the smoothing properties of the CAR model, and this is the focus of chapter 6. Secondly, I hoped to evaluate the usefulness of incorporating a zero-inflated Poisson (ZIP) component as well as a shared-component model in terms of modeling a sparse outcome, and this is carried out in chapter 7. The third goal was to identify optimal sampling and sample size schemes designed to select individual level data for a hybrid ecological spatial model, and this is done in chapter 8. Finally, I wanted to put together the earlier improvements to the CAR model, and along with demographic projections, provide forecasts for birth defects at the SLA level. Chapter 9 describes how this is done. For the first objective, I examined a series of neighbourhood weight matrices, and showed how smoothing the relative risk estimates according to similarity by an important covariate (i.e. maternal age) helped improve the model’s ability to recover the underlying risk, as compared to the traditional adjacency (specifically the Queen) method of applying weights. Next, to address the sparseness and excess zeros commonly encountered in the analysis of rare outcomes such as birth defects, I compared a few models, including an extension of the usual Poisson model to encompass excess zeros in the data. This was achieved via a mixture model, which also encompassed the shared component model to improve on the estimation of sparse counts through borrowing strength across a shared component (e.g. latent risk factor/s) with the referent outcome (caesarean section was used in this example). Using the Deviance Information Criteria (DIC), I showed how the proposed model performed better than the usual models, but only when both outcomes shared a strong spatial correlation. The next objective involved identifying the optimal sampling and sample size strategy for incorporating individual-level data with areal covariates in a hybrid study design. I performed extensive simulation studies, evaluating thirteen different sampling schemes along with variations in sample size. This was done in the context of an ecological regression model that incorporated spatial correlation in the outcomes, as well as accommodating both individual and areal measures of covariates. Using the Average Mean Squared Error (AMSE), I showed how a simple random sample of 20% of the SLAs, followed by selecting all cases in the SLAs chosen, along with an equal number of controls, provided the lowest AMSE. The final objective involved combining the improved spatio-temporal CAR model with population (i.e. women) forecasts, to provide 30-year annual estimates of birth defects at the Statistical Local Area (SLA) level in New South Wales, Australia. The projections were illustrated using sixteen different SLAs, representing the various areal measures of socio-economic status and remoteness. A sensitivity analysis of the assumptions used in the projection was also undertaken. By the end of the thesis, I will show how challenges in the spatial analysis of rare diseases such as birth defects can be addressed, by specifically formulating the neighbourhood weight matrix to smooth according to a key covariate (i.e. maternal age), incorporating a ZIP component to model excess zeros in outcomes and borrowing strength from a referent outcome (i.e. caesarean counts). An efficient strategy to sample individual-level data and sample size considerations for rare disease will also be presented. Finally, projections in birth defect categories at the SLA level will be made.

Benefits of collaborative ICT adoption for building project management

Purpose : Effective flow of data and communication at every stage of a construction project is essential for achieving required coordination and collaboration between the project participants, leading to successful management of the projects. In present scenario, when project participants are geographically separated, adoption of information communication technology (ICT) enables such effective communication. Thus, the purpose of this paper is to focus on ICT adoption for building project management.---------- Design/methodology/approach : It is difficult to quantitatively evaluate the benefits of ICT adoption in the multiple enterprise scenario of building project management. It requires qualitative analysis based on the perceptions of the construction professionals. The paper utilizes interpretive structural modeling (ISM) technique to assess importance of perceived benefits and their driving power and dependence on other benefits.---------- Findings : The developed ISM model shows that all the categories of benefits, i.e. benefits related to projects, team management, technology, and organization are inter-related and cannot be achieved in isolation. But, organization- and technology-related benefits have high-driving power and these are “strategic benefits” for the project team organizations. Thus, organizations are required to give more attention on strategically increasing these benefits from application of ICT. Originality/value – This analysis provides a road map to managers or project management organizations to decide that if they are planning ICT adoption for achieving certain benefits then which are the other driving benefits that should be achieved prior to that and also which are the dependent benefits that would be achieved by default.

Comprehensive standardized data definitions for acute coronary syndrome research in emergency departments in Australasia

Patients with chest discomfort or other symptoms suggestive of acute coronary syndrome (ACS) are one of the most common categories seen in many Emergency Departments (EDs). While the recognition of patients at high-risk of ACS has improved steadily, identifying the majority of chest pain presentations who fall into the low-risk group remains a challenge. Research in this area needs to be transparent, robust, applicable to all hospitals from large tertiary centres to rural and remote sites, and to allow direct comparison between different studies with minimum patient spectrum bias. A standardised approach to the research framework using a common language for data definitions must be adopted to achieve this. The aim was to create a common framework for a standardised data definitions set that would allow maximum value when extrapolating research findings both within Australasian ED practice, and across similar populations worldwide. Therefore a comprehensive data definitions set for the investigation of non-traumatic chest pain patients with possible ACS was developed, specifically for use in the ED setting. This standardised data definitions set will facilitate ‘knowledge translation’ by allowing extrapolation of useful findings into the real-life practice of emergency medicine.

Neighborhood disadvantage and physical activity : baseline results from the HABITAT multilevel longitudinal study

PURPOSE: To examine the association between neighborhood disadvantage and physical activity (PA). ---------- METHODS: We use data from the HABITAT multilevel longitudinal study of PA among mid-aged (40-65 years) men and women (n=11, 037, 68.5% response rate) living in 200 neighborhoods in Brisbane, Australia. PA was measured using three questions from the Active Australia Survey (general walking, moderate, and vigorous activity), one indicator of total activity, and two questions about walking and cycling for transport. The PA measures were operationalized using multiple categories based on time and estimated energy expenditure that were interpretable with reference to the latest PA recommendations. The association between neighborhood disadvantage and PA was examined using multilevel multinomial logistic regression and Markov Chain Monte Carlo simulation. The contribution of neighborhood disadvantage to between-neighborhood variation in PA was assessed using the 80% interval odds ratio. ---------- RESULTS: After adjustment for sex, age, living arrangement, education, occupation, and household income, reported participation in all measures and levels of PA varied significantly across Brisbane’s neighborhoods, and neighborhood disadvantage accounted for some of this variation. Residents of advantaged neighborhoods reported significantly higher levels of total activity, general walking, moderate, and vigorous activity; however, they were less likely to walk for transport. There was no statistically significant association between neighborhood disadvantage and cycling for transport. In terms of total PA, residents of advantaged neighborhoods were more likely to exceed PA recommendations. ---------- CONCLUSIONS: Neighborhoods may exert a contextual effect on residents’ likelihood of participating in PA. The greater propensity of residents in advantaged neighborhoods to do high levels of total PA may contribute to lower rates of cardiovascular disease and obesity in these areas