Supporting self-management: development and evaluation of a digital resource for adults with asthma

The problem: Around 300 million people worldwide have asthma and prevalence is increasing. Support for optimal self-management can be effective in improving a range of outcomes and is cost effective, but is underutilised as a treatment strategy. Supporting optimum self-management using digital technology shows promise, but how best to do this is not clear. Aim: The purpose of this project was to explore the potential role of a digital intervention in promoting optimum self-management in adults with asthma. Methods: Following the MRC Guidance on the Development and Evaluation of Complex Interventions which advocates using theory, evidence, user testing and appropriate modelling and piloting, this project had 3 phases. Phase 1: Examination of the literature to inform phases 2 and 3, using systematic review methods and focussed literature searching. Phase 2: Developing the Living Well with Asthma website. A prototype (paper-based) version of the website was developed iteratively with input from a multidisciplinary expert panel, empirical evidence from the literature (from phase 1), and potential end users via focus groups (adults with asthma and practice nurses). Implementation and behaviour change theories informed this process. The paper-based designs were converted to the website through an iterative user centred process (think aloud studies with adults with asthma). Participants considered contents, layout, and navigation. Development was agile using feedback from the think aloud sessions immediately to inform design and subsequent think aloud sessions. Phase 3: A pilot randomised controlled trial over 12 weeks to evaluate the feasibility of a Phase 3 trial of Living Well with Asthma to support self-management. Primary outcomes were 1) recruitment & retention; 2) website use; 3) Asthma Control Questionnaire (ACQ) score change from baseline; 4) Mini Asthma Quality of Life (AQLQ) score change from baseline. Secondary outcomes were patient activation, adherence, lung function, fractional exhaled nitric oxide (FeNO), generic quality of life measure (EQ-5D), medication use, prescribing and health services contacts. Results: Phase1: Demonstrated that while digital interventions show promise, with some evidence of effectiveness in certain outcomes, participants were poorly characterised, telling us little about the reach of these interventions. The interventions themselves were poorly described making drawing definitive conclusions about what worked and what did not impossible. Phase 2: The literature indicated that important aspects to cover in any self-management intervention (digital or not) included: asthma action plans, regular health professional review, trigger avoidance, psychological functioning, self-monitoring, inhaler technique, and goal setting. The website asked users to aim to be symptom free. Key behaviours targeted to achieve this include: optimising medication use (including inhaler technique); attending primary care asthma reviews; using asthma action plans; increasing physical activity levels; and stopping smoking. The website had 11 sections, plus email reminders, which promoted these behaviours. Feedback during think aloud studies was mainly positive with most changes focussing on clarification of language, order of pages and usability issues mainly relating to navigation difficulties. Phase 3: To achieve our recruitment target 5383 potential participants were invited, leading to 51 participants randomised (25 to intervention group). Age range 16-78 years; 75% female; 28% from most deprived quintile. Nineteen (76%) of the intervention group used the website for an average of 23 minutes. Non-significant improvements in favour of the intervention group observed in the ACQ score (-0.36; 95% confidence interval: -0.96, 0.23; p=0.225), and mini-AQLQ scores (0.38; -0.13, 0.89; p=0.136). A significant improvement was observed in the activity limitation domain of the mini-AQLQ (0.60; 0.05 to 1.15; p = 0.034). Secondary outcomes showed increased patient activation and reduced reliance on reliever medication. There was no significant difference in the remaining secondary outcomes. There were no adverse events. Conclusion: Living Well with Asthma has been shown to be acceptable to potential end users, and has potential for effectiveness. This intervention merits further development, and subsequent evaluation in a Phase III full scale RCT.

Virtual Enterprise Process Management: An Application to Industrial Maintenance

Part 2: Behaviour and Coordination

Developing a Process to Create and Validate an Instrument Assessing Student Attainment of Competencies at an Intercultural University in Mexico

This study took place at one of the intercultural universities (IUs) of Mexico that serve primarily indigenous students. The IUs are pioneers in higher education despite their numerous challenges (Bertely, 1998; Dietz, 2008; Pineda & Landorf, 2010; Schmelkes, 2009). To overcome educational inequalities among their students (Ahuja, Berumen, Casillas, Crispín, Delgado et al., 2004; Schmelkes, 2009), the IUs have embraced performance-based assessment (PBA; Casillas & Santini, 2006). PBA allows a shared model of power and control related to learning and evaluation (Anderson, 1998). While conducting a review on PBA strategies of the IUs, the researcher did not find a PBA instrument with valid and reliable estimates. The purpose of this study was to develop a process to create a PBA instrument, an analytic general rubric, with acceptable validity and reliability estimates to assess students’ attainment of competencies in one of the IU’s majors, Intercultural Development Management. The Human Capabilities Approach (HCA) was the theoretical framework and a sequential mixed method (Creswell, 2003; Teddlie & Tashakkori, 2009) was the research design. IU participants created a rubric during two focus groups, and seven Spanish-speaking professors in Mexico and the US piloted using students’ research projects. The evidence that demonstrates the attainment of competencies at the IU is a complex set of actual, potential and/or desired performances or achievements, also conceptualized as “functional capabilities” (FCs; Walker, 2008), that can be used to develop a rubric. Results indicate that the rubric’s validity and reliability estimates reached acceptable estimates of 80% agreement, surpassing minimum requirements (Newman, Newman, & Newman, 2011). Implications for practice involve the use of PBA within a formative assessment framework, and dynamic inclusion of constituencies. Recommendations for further research include introducing this study’s instrument-development process to other IUs, conducting parallel mixed design studies exploring the intersection between HCA and assessment, and conducting a case study exploring assessment in intercultural settings. Education articulated through the HCA empowers students (Unterhalter & Brighouse, 2007; Walker, 2008). This study aimed to contribute to the quality of student learning assessment at the IUs by providing a participatory process to develop a PBA instrument.

Process oriented framework to support PLM implementation

Product lifecycle management (PLM) innovates as it defines both the product as a central element to aggregate enterprise information and the lifecycle as a new time dimension for information integration and analysis. Because of its potential benefits to shorten innovation lead-times and to reduce costs, PLM has attracted a lot of attention at industry and at research. However, the current PLM implementation stage at most organisations still does not apply the lifecycle management concepts thoroughly. In order to close the existing realisation gap, this article presents a process oriented framework to support effective PLM implementation. The framework central point consists of a set of lifecycle oriented business process reference models which links the necessary fundamental concepts, enterprise knowledge and software solutions to effectively deploy PLM. (c) 2007 Elsevier B.V. All rights reserved.

Distributed process execution in collaborative networks

Processes are a central entity in enterprise collaboration. Collaborative processes need to be executed and coordinated in a distributed Computational platform where computers are connected through heterogeneous networks and systems. Life cycle management of such collaborative processes requires a framework able to handle their diversity based on different computational and communication requirements. This paper proposes a rational for such framework, points out key requirements and proposes it strategy for a supporting technological infrastructure. Beyond the portability of collaborative process definitions among different technological bindings, a framework to handle different life cycle phases of those definitions is presented and discussed. (c) 2007 Elsevier Ltd. All rights reserved.

Modelling text file evaluation processes

Text file evaluation is an emergent topic in e-learning that responds to the shortcomings of the assessment based on questions with predefined answers. Questions with predefined answers are formalized in languages such as IMS Question & Test Interoperability Specification (QTI) and supported by many e-learning systems. Complex evaluation domains justify the development of specialized evaluators that participate in several business processes. The goal of this paper is to formalize the concept of a text file evaluation in the scope of the E-Framework – a service oriented framework for development of e-learning systems maintained by a community of practice. The contribution includes an abstract service type and a service usage model. The former describes the generic capabilities of a text file evaluation service. The later is a business process involving a set of services such as repositories of learning objects and learning management systems.

A process-based control for evolvable production systems

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process

The performance of parts produced by Free Form Extrusion (FFE), an increasingly popular additive manufacturing technique, depends mainly on their dimensional accuracy, surface quality and mechanical performance. These attributes are strongly influenced by the evolution of the filament temperature and deformation during deposition and solidification. Consequently, the availability of adequate process modelling software would offer a powerful tool to support efficient process set-up and optimisation. This work examines the contribution to the overall heat transfer of various thermal phenomena developing during the manufacturing sequence, including convection and radiation with the environment, conduction with support and between adjacent filaments, radiation between adjacent filaments and convection with entrapped air. The magnitude of the mechanical deformation is also studied. Once this exercise is completed, it is possible to select the material properties, process variables and thermal phenomena that should be taken in for effective numerical modelling of FFE.

Managing Business Processes in Corporate Expansion

Yrityksen laajentuessa kansainvälisesti, olemassa olevat rutiinit jäävät vanhoiksi ja liiketoimintaprosessien johtaminen muuttuu. Kyseisten prosessien täytyy olla läpinäkyviä ja tietovirtojen hyvin suunniteltuja. Prosessien harmonisointi aiheuttaa haasteita yrityksessä ja konsernin etu tulee ottaa huomioon. Ahlstrom konserni laajentuu merkittävästi kaikilla liiketoiminta-alueillaan ja kansainvälinen laajentuminen vie Ahlstrom Glassfibre Oy:n täysin uuteen tilanteeseen. Liiketoimintaprosessien johtamiseen vaikuttavat konsernin ohjaus, mahdollisuudet muutosten implementoimiseksi, toimintaympäristön tekijät ja järjestelmien muodostama arkkitehtuuri. Tässä tutkimuksessa keskitytään ydinprosessien tietovirtoihin ja työ on tehty Karhulan tehtaalla Suomessa. Johtamismallin luomiseksi vaaditaan yrityksessä ongelmia määrittelevää työskentelyä. Tämä ongelmanmääritys oli työn tärkein tavoite. Ongelma-alueiden tutkimuksen pohjalta muodostettiin ratkaisu, jossa käsiteltiin systemaattisen liiketoimintaprosessien johtamisen mahdollisuuksia ja vaatimuksia. Lopputuloksena voidaan todeta, että suurin painopiste löytyy informaatioteknologian ja liiketoiminnan rajapinnoista. Tähän työhön liittyvät myös prossien harmonisointi ja integrointi.

Service Improvement with Process Modernizations

Työn tarkoituksena on tuottaa liikkeenjohdon konsulttiyritykselle uusi työmenetelmä, jonka avulla se voi vetää kehitysprojekteja joissa asiakasyritysten teollisia palveluprosesseja parannetaan. Prosessiparannusten tulisi tuottaa selvää hyötyä asiakkaille sekä palveluntarjoajan henkilöstölle ja johdolle pian sen jälkeen kun ajanmukaistetut prosessit on menestyksellisesti otettu käyttöön. Menetelmän luonti käynnistyy kirjallisuuskatsauksella, jossa käsitellään aiheita kuten palvelut, teolliset palvelut ja liiketoimintaprosessien uudelleensuunnittelu. Menetelmän luonnin vaatimukset määritellään. Asiakasprojekti, jossa menetelmää koekäytetään, esitellään. Menetelmä esitellään. Se on ylhäältä alaspäin muodostettu kehitysprosessin vetäjän opas. Päätavoitteet asetettiin ensin. Niitä tukevat alitavoitteetasetettiin seuraavaksi. Työohjeet luotiin siten, että tavoitteiden saavuttaminen mahdollistuisi. Samalla kehitettiin menetelmää tukevia työkaluja. Alustavat työohjeet ja työkalut jalostuivat menetelmän koekäytön aikana nykyiseen muotoonsa.Menetelmän laatua arvioidaan koekäytön jälkeen asetettujen tavoitteiden ja saavutettujen tulosten eroja vertaamalla. Valmistumisen jälkeen toteutettavat menetelmän jatkokehitystoimenpiteet esitellään.

Careers of Managers, Comparison between ICT and Paper Business Sectors

The purpose of this study is to increase understanding of how the managers build their early career in information and communication technology industry (ICT business sector) and pulp- and paper industry (paper business sector). The focus of the study is to explore the importance differing a business sectors have in influencing managerial careers. Business sectors can affect careers in several ways.Sectors have different history and traditions. Also the age structure of ICT personnel differs from the age structure of personnel in the paper industry. Managers in the ICT and paper sector are technically educated but in different disciplines. Differences exist also in ways of recruiting and developing commitment inpersonnel. The target group of this research, middle management engineering personnel, work in Finnish ICT and paper companies. Research data were gathered in April-December 2002 in South-Karelia by interviewing 30 managers and six directors working in three Finnish ICT companies and in three paper companies. The research issue is approached on two levels: the individual level and the organizational level. The managers related their career stories in focused interviews. Directors, representing the organizations, described the generalities of the business sector and gave background information on company policies, human relationshippractices, as well as career and human resource development. Results of the study contribute to research discussions of career, life-span reasoning, socialization and commitment. Career is conceived as a series of positions including everykind of hierarchical mobility and all kinds of positions in work. A manager's career develops in interaction with the organization and it can be seen as involving a socializing process in an organization as a consequence of experiences andchanges in positions. This research contributes to the understanding of the nature of career in the context of two business sectors. Universal career theories,for the most part, do not perceive the importance of business sector in determining career experience. This study concentrates on describing and understanding early careers in two different business areas, elements committing managers to particular business sectors and the actions of companies in that particular sector. While career research began in the middle of 1950s, the theoretical basis of career research seems to be quite fragmented still. However, a dichotomy is consistently presented between traditional, hierarchical career research and boundaryless career thinking. In this research we examine how these old and new career concepts are evidence in the ICT and paper sectors. Careers are changing from formal, hierarchy-based structures to more fluid arrangements. The new boundaryless career concept captures territory from old career thinking. Mobility between employers, networks, and changing hierarchical structures in organizations, as well as personal and family reasons are theorized to bring changes to careers patterns in the future. However, the pace of this change in careers will vary between the ICT and paper business sectors. Findings of this research indicate that business sector has an effect on how managerial careers develop. The environment where career is developed differs between ICT and paper sectors. Careers begin differently in the two environments and the speed of career progression is distinct. ICT careers are built within the business sector whereas paper careers are made inside one company. Also recruiting and socialization practices differ from one sector to the other.

Teleoperaattorin suurasiakasmyynnin myyntiprosessin kehittäminen

Diplomityön tavoitteena oli selvittää erään teleoperaattorina toimivan yrityksen sisäisen liiketoimintayksikön nykyisiä kumppanuusmalleja ja toimintatapoja sekä tehdä vaiheistettu ehdotus toiminnan tehostamisesta uudella mallilla. Tämä yksikkö toimii yrityksen suurasiakasmyyntiyksikkönä. Tavoitteena on luoda kehitettävistä uusista toimintamalleista uusi myyntiprosessi ja ottaa se käytäntöön vaiheistetusti. Tutkimuksen ensimmäisessä vaiheessa selvitettiin yrityksen suurasiakasmyyntiyksikön nykyiset kumppanuusmallit ja myyntiprosessi. Tässä keskityttiin myyntiyksikön kannalta merkittäviin toimintoihin. Yrityksen suurasiakasmyynnin toiminnassa havaittiin ongelmana myyntihenkilöstön ajankäyttö, jonka taustoja selvitettiin. Suurin osa myyjien ajasta kului päivittäisrutiinien suorittamiseen ja ongelmatilanteiden selvittämiseen. Tällaisia tilanteita olivat mm. laskutusepäselvyydet, asennustöiden viivästymiset ja tarjousten teknisten ratkaisuiden tekeminen. Nämä toiminnot veivät yli puolet myyjien ajasta, josta tavoitteellisesti yli 80 prosenttia pitäisi kulua asiakkaiden kanssa suoraan toimimiseen. Tutkimuksen teoriataustana käytettiin kahta prosessijohtamisen koulukuntaa; BPR:ää (Business Process Reengineering) ja TQM:ää (Total Quality Management). Niihin perehdyttiin kirjallisuuden ja artikkeleiden avulla ja tähän työhön niistä kirjoitettiin merkitykselliset osat. Yrityksen suurasiakasmyyntiyksikön uuden myyntiprosessin kehittäminen aloitettiin segmentoimalla sen asiakkaat avain-, kanta-, kasvu- ja arvoasiakkaisiin. Näille segmenteille kehitettiin omat myyntimallinsa, joihin liittyi niille suunnattava tarjooma (tuotevalikoima). Tämän jälkeen myyntimallit koulutettiin henkilöstölle ja samalla kerättiin informaatiota uuden myyntiprosessin luomista varten. Uusi myyntiprosessi jakautuu viiteen vaiheeseen. Pre sales –vaiheessa (1) keskitytään asiakkuuksien johtamiseen, yrityksen myyjien oman organisaation ja liiketoimintaympäristön tuntemukseen ja uusasiakashankintaan. Ehdotusvaiheessa (2) tehdään asiakkaalle ehdotus kehitysprojektista, jonka tähtäimenä on luoda asiakkaalle tarve hyödyntää tietoliikennettä omassa toiminnassaan. Tämän toiminnan tavoitteena on päästä mukaan mahdollisimman syvälle asiakkaan liiketoimintaan ja sitä kautta kasvattaa liikevaihtoa ja kannattavuutta. Myyntivaiheessa (3) asiakkaalta on saapunut tarjouspyyntö ja sen pohjalta valmistellaan tarjous. Tämän jälkeen käydään tarkentavia neuvotteluita ja pyritään saamaan suotuisa päätös ja sitä kautta tilaus asiakkaalta. Toimitusvaiheessa (4) myydyt tuotteet ja palvelut syötetään tilausjärjestelmiin ja toimitetaan asiakkaalle. Tämän jälkeen seuraa toimituksen kertalaskutus ja jälkimyynti/markkinointi, jolla jo kertaalleen myydyt tuotteet ja palvelut ikään kuin myydään asiakkaalle uudestaan. Viimeinen vaihe on after sales –vaihe (5), jossa varmistetaan myytyjen tuotteiden ja palveluiden ja niiden kausilaskutuksen toimivuudet, tehdään raportointia ja myydään asiakkaalle jo myytyjen tuotteiden lisäksi uusia lisäpalveluita.

Maintenance process development for remote administration of network servers

Maintenance is a part of system development and it is possible to develop operation models for accomplishing maintenance tasks. These models can be applied to individual maintenance tasks, maintenance projects and version management. Beneficial operation models makes maintenance more effective and they assist in managing various changes. The purpose of this thesis was to develop a maintenance process which can be used to remote administer network servers. This consisted of defining those operation models and technical specifications which enable to set up, manage changes, maintain and monitor resources of information systems that are located in several different sites. At first in this thesis the needs of the process were determined and requirements were defined based on those needs. The meaning of processes in maintenance of information systems, maintenance workflows and challenges were studied. Then current practical problems and disadvantages of maintenance work were analyzed in order to focus the development to proper issues. Because available operation models did not cover all the recent needs, new maintenance process which fulfilled the requirements was developed.

The experience of identity transformation process for people living with tetraplegia and paraplegia = El proceso de reconstrucción de la identidad de las personas afectadas de una paraplejia o tetraplejia

A spinal cord injury (SCI) is perceived as a source of biographical disruption, not only at a physical level but also in terms of people’s life stories, their motivation and their self-esteem. The aim of this study is to explore the factors that people with spinal cord injuries perceive as contributing to rebuilding their sense of self. Two focus groups were established from the SCIcommunity, one of which was made up of 14 people with paraplegia and the other of 9 people with tetraplegia. In addition, four individual interviews were conducted with the participants. The results of content analysis show that the two most prominent factors in the process of identity renegotiation are the partial transformation of the subject’s identity followed by a coming to terms with that new identity. To rebuild self-worth, the importance of finding a balance between change and continuity was identified. Renegotiation of identity after a spinal cord injury is a complex phenomenon that greatly influences the SCI individual’s quality of life perceptions. Reaching a balance between the changes experienced due to the injury and finding a sense of continuity can be either facilitated or obstructed by the economic, political, legal, architectural, and social context