Proposal and design of airy-based rocket pulses for invariant propagation in lossy dispersive media

A novel kind of Airy-based pulse with an invariant propagation in lossy dispersive media is proposed. The basic principle is based on an optical energy trade-off between different parts of the pulse caused by the chromatic dispersion, which is used to compensate the attenuation losses of the propagation medium. Although the ideal concept of the proposed pulses implies infinite pulse energy, the numerical simulations show that practical finite energy pulses can be designed to obtain a partially invariant propagation over a finite distance of propagation.

Proposal and design of phase-modulated fiber gratings in transmission for pulse shaping

A novel approach to pulse shaping using a phase-modulated fiber Bragg grating (FBG) in transmission is proposed and designed. We show that phase-modulated FBGs can provide transmission responses suitable for pulse shaping applications, offering important technological feasibility benefits, since the coupling strength remains basically uniform in the grating. Moreover, this approach retains the substantial advantages of FBGs in transmission, such as optimum energy efficiency, no requirement for an optical circulator, and robustness against fabrication errors.

Evaluation of wind-induced internal pressure in low-rise buildings: A multi scale experimental and numerical approach

Hurricane is one of the most destructive and costly natural hazard to the built environment and its impact on low-rise buildings, particularity, is beyond acceptable. The major objective of this research was to perform a parametric evaluation of internal pressure (IP) for wind-resistant design of low-rise buildings and wind-driven natural ventilation applications. For this purpose, a multi-scale experimental, i.e. full-scale at Wall of Wind (WoW) and small-scale at Boundary Layer Wind Tunnel (BLWT), and a Computational Fluid Dynamics (CFD) approach was adopted. This provided new capability to assess wind pressures realistically on internal volumes ranging from small spaces formed between roof tiles and its deck to attic to room partitions. Effects of sudden breaching, existing dominant openings on building envelopes as well as compartmentalization of building interior on the IP were systematically investigated. Results of this research indicated: (i) for sudden breaching of dominant openings, the transient overshooting response was lower than the subsequent steady state peak IP and internal volume correction for low-wind-speed testing facilities was necessary. For example a building without volume correction experienced a response four times faster and exhibited 30–40% lower mean and peak IP; (ii) for existing openings, vent openings uniformly distributed along the roof alleviated, whereas one sided openings aggravated the IP; (iii) larger dominant openings exhibited a higher IP on the building envelope, and an off-center opening on the wall exhibited (30–40%) higher IP than center located openings; (iv) compartmentalization amplified the intensity of IP and; (v) significant underneath pressure was measured for field tiles, warranting its consideration during net pressure evaluations. The study aimed at wind driven natural ventilation indicated: (i) the IP due to cross ventilation was 1.5 to 2.5 times higher for Ainlet/Aoutlet>1 compared to cases where Ainlet/Aoutlet<1, this in effect reduced the mixing of air inside the building and hence the ventilation effectiveness; (ii) the presence of multi-room partitioning increased the pressure differential and consequently the air exchange rate. Overall good agreement was found between the observed large-scale, small-scale and CFD based IP responses. Comparisons with ASCE 7-10 consistently demonstrated that the code underestimated peak positive and suction IP.

The design studio as liminal space

The context of this research focuses on the efficacy of design studio as a form of teaching and learning. The established model of project-based teaching makes simple parallels between studio and professional practice. However, through comparison of the discourses it is clear that they are of different character. The protocols of the tutorial tradition can act to position the tutor as a defender of the knowledge community rather than a discourse guide for the student. The question arises as to what constitutes the core knowledge that would enable better self-directed study. Rather than focus on key knowledge, there has been an attempt in other fields to agree and share ‘threshold concepts’ within disciplinary knowledge. Meyer and Land describe threshold concepts as representing “a transformed way of understanding, or interpreting or viewing something without which the learner cannot progress [1]. The tutor’s role should be to assist in transforming student’s understanding through the mastery of the ‘troublesome knowledge’ that threshold concepts may embody. Teaching and learning environments under such approaches have been described as ‘liminal’: holding the learner in an ‘in-between’ state new understanding may be difficult and involve identity shifts. Research on the consequence of pressures on facilities and studio space concur, and indicate that studio spaces can be much better used in assisting the path of learning [2]. Through an overview map of threshold concepts, the opportunities for blended learning in supporting student learning in the liminal space of the design studio become much clearer [3] Design studio needs to be recontextualised within the discourse of higher education scholarship, based on a clarified curriculum built from an understanding of what constitutes its threshold concepts. The studio needs to be reconsidered as a space quite unlike that of the practitioner, a liminal space. 1. Meyer, J.H.F. and R. Land, Threshold concepts and troublesome knowledge. Overcoming Barriers to Student Learning: Threshold concepts and troublesome knowledge., 2006: p. 19. 2. Cai, H. and S. Khan, The Common First Year Studio in a Hot-desking Age: An Explorative Study on the Studio Environment and Learning. Journal for Education in the Built Environment 2010. 5(2): p. 39-64. 3. Pektas, S.T., The Blended Design Studio: An Appraisal of New Delivery Modes in Design Education. Procedia - Social and Behavioral Sciences, 2012. 51(0): p. 692-697.

Policy and Design Guidelines for Trees in a Growing Seattle

Thesis (Master's)--University of Washington, 2016-08

Indoor environment and the impact on the health of pre-exisiting asthmatics at work: the development of a risk management framework

This thesis examines the spatial and temporal variation in nitrogen dioxide (NO2) levels in Guernsey and the impacts on pre-existing asthmatics. Whilst air quality in Guernsey is generally good, the levels of NO2 exceed UK standards in several locations. The evidence indicates that people suffering from asthma have exacerbation of their symptoms if exposed to elevated levels of air pollutants including NO2, although this research has never been carried out in Guernsey before. In addition, exposure assessment of individuals is rarely carried out and research in this area is limited due to the complexity of undertaking such a study, which will include a combination of exposures in the home, the workplace and ambient exposures, which vary depending on the individual daily experience. For the first time in Guernsey, this research has examined NO2 levels in correlation with asthma patient admissions to hospital, assessment of NO2 exposures in typical homes and typical workplaces in Guernsey. The data showed a temporal correlation between NO2 levels and the number of hospital admissions and the trend from 2008-2012 was upwards. Statistical analysis of the data did not show a significant linear correlation due to the small size of the data sets. Exposure assessment of individuals showed a spatial variation in exposures in Guernsey and assessment in indoor environments showed that real-time analysis of NO2 levels needs to be undertaken if indoor micro environments for NO2 are the be assessed adequately. There was temporal and spatial variation in NO2 concentrations measured using diffusion tubes, which provide a monthly mean value, and analysers measuring NO2 concentrations in real time. The research shows that building layout and design are important factors for good air flow and ventilation and the dispersion of NO2 indoors. Environmental Health Officers have statutory responsibilities for ambient air quality, hygiene of buildings and workplace environments and this role needs to be co-ordinated with healthcare professionals to improve health outcomes for asthmatics. The outcome of the thesis was the development of a risk management framework for pre-existing asthmatics at work for use by regulators of workplaces and an information leaflet to assist in improving health outcomes for asthmatics in Guernsey.

Impacts of fishery activities on lake shore environment and options for sustainable management

Over the years, degradation of the lakeshore resources has been going on due to human induced activities. Human activities notably house construction, fish smoking, boat construction and cooking at the landings impact the tree and forest cover along the lakeshore and Islands. The survey was conducted in ten districts surrounding Lake Victoria and the landings sampled were selected with the help of the District Fisheries Officers. Data was obtained from selected fishermen and Key informants at these landing sites. The study examined the extent of knowledge on importance, utilization, threats and conservation of trees/forests at the landings. Results showed that the fishers (98%) were aware of the benefits derived from the trees/forests. According to the respondents, the most commonly used tree species for boat construction were Mvule (40%), Mkibu (20%), Musizi (17%) and Mpewere (11 %). This was mainly because these trees were durable. For house construction, Nsambya (25%), Musizi (24%) and other materials (12%) were the most commonly used. For other activities like fish smoking and cooking at the landing, the Fisherfolk used any type of tree species readily available at the landings. As regards the status of the trees at the landings, most of the respondents (72%) J agreed that due to some fishery related activities some tree species had reduced more than others in the vicinity of most landings. Most respondents said that the, most reduced tree species around the landings were Mvule (36%) and Musizi (22%). Among the fishery related activities that had a significant impact on the trees/forests, construction of houses (44%) and boats (22%) emerged uppermost. Other activities such as fish smoking (14%) and cooking (12%) had the least impact on trees/forests. Generally, there was extensive reduction of trees at the landings. Therefore there was need to regulate cutting of trees and to have specific programmes targeting afforestation at and around fish landings.

Correlations between thermal environment and egg quality of two layer commercial strains

Heat stress limits the productivity of laying hens, as reflected by egg production and egg quality. The present study aimed at showing the correlations between egg quality parameters and environmental variables recorded on the day eggs were laid and on the previous days. Birds were housed in battery cages in a commercial poultry house. Main component analyses were used to verify associations between environmental and production variables, and Pearson's linear correlation tests were used to further investigate those associations. Analyses were carried out separately for to layer strains, Dekalb® White and Hy-Line® w36, and the variables egg weight (g), eggshell weight (g), specific gravity (g/cm³) and eggshell percentage (%) were compared with the environmental variables of the same day of the production, and one, two, three, and four days before egg production. Sound intensity measured inside the houses was positively associated with the quality parameters of eggs produced on the next day. Thermal environmental variables affected the egg quality differently in each strain, particularly air temperature, internal roof tile temperature, relative humidity, and air velocity. Ammonia concentration measured inside the houses was lower than 1ppm, and did not affect production performance.

SAFARI optical system architecture and design concept

SpicA FAR infrared Instrument, SAFARI, is one of the instruments planned for the SPICA mission. The SPICA mission is the next great leap forward in space-based far-infrared astronomy and will study the evolution of galaxies, stars and planetary systems. SPICA will utilize a deeply cooled 2.5m-class telescope, provided by European industry, to realize zodiacal background limited performance, and high spatial resolution. The instrument SAFARI is a cryogenic grating-based point source spectrometer working in the wavelength domain 34 to 230 μm, providing spectral resolving power from 300 to at least 2000. The instrument shall provide low and high resolution spectroscopy in four spectral bands. Low Resolution mode is the native instrument mode, while the high Resolution mode is achieved by means of a Martin-Pupplet interferometer. The optical system is all-reflective and consists of three main modules; an input optics module, followed by the Band and Mode Distributing Optics and the grating Modules. The instrument utilizes Nyquist sampled filled linear arrays of very sensitive TES detectors. The work presented in this paper describes the optical design architecture and design concept compatible with the current instrument performance and volume design drivers.

Hospital without dyspnea: Rationale and design of a multidisciplinary intervention

Dyspnea is a common and disabling symptom of respiratory and heart diseases, which is growing in incidence. During hospital admission, breathlessness is under-diagnosed and under-treated, although there are treatments available for controlling the symptom. We have developed a tailored implementation strategy directed to medical staff to promote the application of these pharmacological and non-pharmacological tools in dealing with dyspnea. The primary aim is to decrease the rate of patients that do not receive an adequate relief of dyspnea. This is a four-stage quasi-experimental study. The intervention consists in two teaching talks that will be taught in Cardiology and Respiratory Medicine Departments. The contents will be prepared by Palliative Care specialists, based on available tools for management of dyspnea and patients' needs. A cross-sectional study of dyspnea in hospitalized patients will be performed before and after the intervention to ascertain an improvement in dyspnea intensity due to changes in medical practices. The last phase consists in the creation of consensus protocols for dyspnea management based in our experience. The results of this study are expected to be of great value and may change clinical practice in the near future and promote a changing for the better of dyspnea care.

The quality of the physical environment and its association with activities and well-being among older people in residential care facilities

The physical environment can influence older people’s health and well-being, and is often mentioned as being an important factor for person-centred care. Due to high levels of frail health, many older people spend a majority of their time within care facilities and depend on the physical environment for support in their daily life. However, the quality of the physical environment is rarely evaluated, and knowledge is sparse in terms of how well the environment meets the needs of older people. This is partly due to the lack of valid and reliable instruments that could provide important information on environmental quality. Aim: The aim of this thesis was to study the quality of the physical environment in Swedish care facilities for older people, and how it relates to residents’ activities and well-being. Methods: The thesis comprises four papers where both qualitative and quantitative methods were used. Study I involved the translation and adaptation of the Sheffield Care Environment Assessment Matrix (SCEAM) into a Swedish version (S-SCEAM). Several methods were used including forward and backward translation, test of validity via expert consultation and reliability tests. In Study II, S-SCEAM was used to assess the quality of the environment, and descriptive data were collected from 20 purposively sampled residential care facilities (RCFs). Study III was a comparative case study conducted at two RCFs using observations, interviews and S-SCEAM to examine how the physical environment relates to older people’s activities and interactions. In study IV, multilevel modeling was used to determine the association between the quality of the physical environment and the psychological and social well-being of older people living in RCFs. The data in the thesis were analysed using qualitative content analysis, and descriptive, bivariate and multilevel statistics. Results: A specific result was the production of the Swedish version of SCEAM. The instrument contains 210 items structured into eight domains reflecting the needs of older people. When using S-SCEAM, the results showed a substantial variation in the quality of the physical environment between and within RCFs. In general, private apartments and dining areas had high quality, whereas overall building layout and outdoor areas had lower quality. Also, older people’s safety was supported in the majority of facilities, whereas cognitive support and privacy had lower quality. Further, the results showed that environmental quality in terms of cognitive support was associated with residents’ social well-being. Specific environmental features, such as building design and space size, were also noted, through observation, as influencing residents’ activities, and several barriers were found that seemed to restrict residents’ full use of the environment. Conclusions: This thesis contributes to the growing evidence-based design field. The S-SCEAM can be used in future research on the association between the environment and people’s health and well-being. The instrument could also serve as a guide in the planning and design process of new RCFs.

Factores asociados al desplazamiento activo en bicicleta al colegio en el Distrito Bogotá, Colombia. Estudio FUPRECOL

Introducción: El transporte activo (TA) puede ser una oportunidad para incrementar los niveles de actividad física diarios de los niños y adolescentes, además de destacarse como una estrategia práctica, accesible y sostenible a largo plazo. Objetivos: El objetivo del presente estudio es doble: Analizar los patrones de desplazamiento activo en bicicleta al y desde el centro educativo, y b) Identificar los factores asociados al uso de la bicicleta como TA; en una muestra de niños y jóvenes pertenecientes a escuelas oficiales de Bogotá, Colombia. Material y métodos: Se trata de un sub-análisis del estudio FUPRECOL en 8060 niños y adolescentes entre los 9-17 años de edad). El modo de desplazamiento del escolar fue determinado a través de la pregunta: “¿Durante los últimos 7 días, usaste bicicleta para ir al colegio/escuela y volver a la casa?. Dicha respuesta se categorizó en activos “Si” (si se desplazan en bicicleta) y pasivos “No” (si se desplazan en vehículo motorizado). Se midieron parámetros antropométricos de peso, talla y perímetro de cintura. El máximo nivel de estudios alcanzados por la madre/padre (no reporta, primaria o secundaria/técnico o tecnólogo/universitario o postgrado) y la composición del hogar (vive con padre/vive con madre/con ambos padres/con abuelos/otros familiares) se auto-reportó por los padres. Las relaciones entre el TA y los factores anteriormente descritos se analizaron mediante regresión logística binaria. Resultados: El 21,9% del total de la muestra reporta usar la bicicleta como medio de transporte y el 7,9% acumula más de 120 minutos al día. Se observó una mayor probabilidad de usar la bicicleta como medio de desplazamiento activo a la escuela en los varones, en los jóvenes entre 9 y 12 años, y en aquellos cuyo padre/madre reportaron mayor grado académico, es decir, “universitario/postgrado”. 3 Conclusión: Los hallazgos del presente estudio sugieren que es necesario promover el TA desde la niñez, poniendo mayor énfasis en el paso a la adolescencia y en las jóvenes, para así aumentar los niveles diarios de AF de estos.

Special Issue “ Fluid Flow, Energy Transfer and Design”

Fluids are important because of their preponderance in our lives. Fluid mechanics touches almost every aspect of our daily lives, and it plays a central role in many branches of science and technology. Therefore, it is a challenging and exciting field of scientific activity due to the complexity of the subject studied and the breadth of the applications. The quest for advances in fluid mechanics, as in other scientific fields, emerge from analytical, computational (CFD) and experimental studies. The improvement in our ability to describe, predict and control the phenomena played (and plays) key roles in the technological breakthroughs. The present theme issue of “Fluid and Heat Flow: Simulation and Optimization” collects a selection of papers. selection of papers presented at Special Session “Fluid Flow, Energy Transfer and Design”

Analysis, modelling and design of a groin as coastal protection structure at Lido di Dante, Ravenna

An analysis and a subsequent solution is here presented. This document is about a groin design able to contrast the erosion actions given by waves in Lido di Dante. Advantages will be visible also for Fiumi Uniti's inlet, in the north side of the shoreline. Beach future progression and growth will be subjected to monitoring actions in the years after groin construction. The resulting effects of the design will have a positive impact not only on the local fauna and environment, but also, a naturalistic appeal will increase making new type of tourists coming not only for recreational purposes. The design phase is focused on possible design alternatives and their features. Particular interest is given to scouring phenomena all around the groin after its construction. Groin effects will impact not only on its south side, instead they will cause an intense erosion process on the downdrift front. Here, many fishing hut would be in danger, thus a beach revetment structure is needed to avoid any future criticality. In addiction, a numerical model based on a generalized shoreline change numerical model, also known as GENESIS, has been applied to the study area in order to perform a simplistic analysis of the shoreline and its future morphology. Critical zones are visible in proximity of the Fiumi Uniti's river inlet, where currents from the sea and the river itself start the erosion process that is affecting Lido di Dante since mid '80s, or even before. The model is affected by several assumptions that make results not to be interpreted as a real future trend of the shore. Instead the model allows the user to have a more clear view about critical processes induced by monochromatic inputed waves. In conclusion, the thesis introduce a wide analysis on a complex erosion process that is affecting many shoreline nowadays. A groin design is seen as a hard solution it is considered to be the only means able to decrease the rate of erosion.