[1er mai 1920 à Paris, un receveur volontaire encadré par des gendarmes sur la plate-forme d'un autobus] : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 59111

Sediment genotoxicity and its relationship to the frequency of chironomid labial plate deformities

Sediment samples were taken from seven locations in the WeIland River in December 1986 and April 1987. The DMSO extracts of these sediment samples showed a significant (pplate deformities (over 1000 individual specimens were observed) . The samples from station D-l showed the highest frequency of chironomid labial plate deformities (10 . 9% ± 3.2%), while samples from the upstream control (station A) displayed t,he lowest frequency of deformities (3.8% ± 1.3%). All samples were coded to avoid unconscious biases . The results of the genotoxicity study indicated that station D-l in the WeIland River was contaminated with genotoxic materials. The genotoxic materials may have induced the observed increased frequency in chironomid labial plate deformities . Samples from stations C and D-l, located in a downstream portion of the river bounded by an industrialized area were slightly toxic according to -the alkaline phosphatase inhib_ii~ion component of the 50S chromotest analyses. The toxicity of these samples was only evident once they had been activated by the 59 (liver extract) mixture.

The effects of manipulated augmented sensory feedback on error detection when using a touch screen

The purpose of the present study was to determine which augmented sensory modality would best develop subjective error-detection capabilities of learners performing a spatial-temporal task when using a touch screen monitor. Participants were required to learn a 5-digit key-pressing task in a goal time of 2550 ms over 100 acquisition trials on a touch screen. Participants were randomized into 1 of 4 groups: 1) visual-feedback (colour change of button when selected), 2) auditory-feedback (click sound when button was selected), 3) visual-auditory feedback (both colour change and click sound when button was selected), and 4) no-feedback (no colour change or click sound when button was selected). Following each trial, participants were required to provide a subjective estimate regarding their performance time in relation to the actual time it took for them complete the 5-digit sequence. A no-KR retention test was conducted approximately 24-hours after the last completed acquisition trial. Results showed that practicing a timing task on a touch screen augmented with both visual and auditory information may have differentially impacted motor skill acquisition such that removal of one or both sources of augmented feedback did not result in a severe detriment to timing performance or error detection capabilities of the learner. The present study reflects the importance of multimodal augmented feedback conditions to maximize cognitive abilities for developing a stronger motor memory for subjective error-detection and correction capabilities.

La plate-forme multifonctionnelle de lutte contre la pauvreté au Mali est-elle économiquement rentable?

Rapport de recherche

Synthèse totale de la lépadine B : plate-forme pour la découverte de nouvelles tranformations chimiques

Dans ce document, serons détaillées les résultats de mes travaux de recherche d’études doctorales. Tout d’abord, nous discuterons de la synthèse totale de la lépadine B, la plus courte à paraître dans la littérature à ce jour. Cette synthèse, en plus de valoriser la synthèse asymétrique de pipéridines poly-substituées développée par l’équipe du professeur Charette, mettra à profit une utilisation originale d’une séquence de fermeture-ouverture de cycle par la réaction de métathèse d’alcènes. De plus, nous détaillerons une brève étude mécanistique de cette dernière nous ayant permis la proposition d’un mécanisme peu commun de ce type de séquence réactionnel et dont les conséquences expérimentales sont impressionnantes. Au cours de cette synthèse, nous avons identifié un synthon d’une grande valeur synthétique. En effet, ne comportant pas moins que quatre centres chiraux, ce synthon pouvait être obtenu énantiopure en seulement trois étapes à partir de la pyridine. Ainsi, nous avons effectué une analyse structurale de ce synthon et avons envisagé une valorisation supplémentaire par une utilisation originale de la fragmentation de Grob. Dans ce contexte, nous avons développé une toute nouvelle synthèse de pipéridines 2,3,6-trisubstituées hautement régio- et diastéréosélective. Afin de pouvoir réaliser la précédente méthodologie, nous avons dû étudier la réduction d’une amide en présence de groupements fonctionnels sensibles dans les conditions usuelles. Heureusement, l’année précédente nous avions développée une réaction hautement chimiosélective d’amides tertaires. Cette nouvelle réaction, qui a été fondamentalement inspiré par une méthodologie du professeur Charette sur l’activation d’amides, a permis la réduction d’amides tertiaires en présence de fonctions telles les cétone, ester, nitrile, époxyde, insaturations, etc. Enfin, l’ensemble des connaissances acquises au cours de ces projets a permis l’élaboration d’une toute nouvelle stratégie de synthèse pour la préparation d’indolizidines et quinolizidines. Plus spécifiquement, nous avons développé la première séquence d’activation intramoléculaire et déaromatization asymétrique de la pyridine. Ceci permet d’avoir un accès aux squelettes indolizidine et quinolizidine avec des stéréosélectivités élevées, la nature insaturée de ces derniers laissant également place à une grande flexibilité synthétique. Dans ce contexte, nous allons détailler une très courte synthèse de trans-indolizidines.

Screen printed nanosized ZnO thick film

Nanosized ZnO was prepared by polyol synthesis. Fluorescence spectrum of the ZnO colloid at varying pump intensities was studied. The powder was extracted and characterized by XRD and BET. The extracted powder was screen printed on glass substrates using ethyl cellulose as binder and turpinol as solvent. Coherent back scattering studies were performed on the screen printed sample which showed evidence of weak localization. The screen printed pattern showed strong UV emission.

Strength Predictions of Hat Stiffened Plate

Hat Stiffened Plates are used in composite ships and are gaining popularity in metallic ship construction due to its high strength-to-weight ratio. Light weight structures will result in greater payload, higher speeds, reduced fuel consumption and environmental emissions. Numerical Investigations have been carried out using the commercial Finite Element software ANSYS 12 to substantiate the high strength-to-weight ratio of Hat Stiffened Plates over other open section stiffeners which are commonly used in ship building. Analysis of stiffened plate has always been a matter of concern for the structural engineers since it has been rather difficult to quantify the actual load sharing between stiffeners and plating. Finite Element Method has been accepted as an efficient tool for the analysis of stiffened plated structure. Best results using the Finite Element Method for the analysis of thin plated structures are obtained when both the stiffeners and the plate are modeled using thin plate elements having six degrees of freedom per node. However, one serious problem encountered with this design and analysis process is that the generation of the finite element models for a complex configuration is time consuming and laborious. In order to overcome these difficulties two different methods viz., Orthotropic Plate Model and Superelement for Hat Stiffened Plate have been suggested in the present work. In the Orthotropic Plate Model geometric orthotropy is converted to material orthotropy i.e., the stiffeners are smeared and they vanish from the field of analysis and the structure can be analysed using any commercial Finite Element software which has orthotropic elements in its element library. The Orthotropic Plate Model developed has predicted deflection, stress and linear buckling load with sufficiently good accuracy in the case of all four edges simply supported boundary condition. Whereas, in the case of two edges fixed and other two edges simply supported boundary condition even though the stress has been predicted with good accuracy there has been large variation in the deflection predicted. This variation in the deflection predicted is because, for the Orthotropic Plate Model the rigidity is uniform throughout the plate whereas in the actual Hat Stiffened Plate the rigidity along the line of attachment of the stiffeners to the plate is large as compared to the unsupported portion of the plate. The Superelement technique is a method of treating a portion of the structure as if it were a single element even though it is made up of many individual elements. The Superelement has predicted the deflection and in-plane stress of Hat Stiffened Plate with sufficiently good accuracy for different boundary conditions. Formulation of Superelement for composite Hat Stiffened Plate has also been presented in the thesis. The capability of Orthotropic Plate Model and Superelement to handle typical boundary conditions and characteristic loads in a ship structure has been demonstrated through numerical investigations.

Screen capture on the Mac

You can capture an image of your entire screen by typing Command-Shift-3. Typing Command-Shift-4 lets you choose a specific part of your screen. Region capture - you can change how the region selection area changes by using the following keys - note that you can release the original keys once the crosshairs appears, as long as you’ve started dragging your mouse, and you keep the mouse button down. • Space Bar: Press and hold the Space Bar, and the size of the current region is then locked and can be dragged around the screen. As long as you hold the Space Bar down, the region’s size is locked and it can be dragged about. • Shift: Press and hold the Shift key, and one side of the region will be locked, based on which way you then move the mouse. For instance, if you press and hold Shift, and then move your mouse down, you’ll only be able to resize the region vertically; the horizontal size will be fixed. Move the mouse left or right, and you can resize the region horizontally while holding the vertical size fixed. • Option: Press and hold Option while dragging your region, and you’ll change the way the region grows as you drag. By default, your region is anchored at the upper left corner; when you press Option, the anchor point is moved to the center of the current region, and it expands in all directions from that point. For more tips check the links!

Year 1 Virtual Patient Screen Capture file

Screen capture used for MedB & VP conference 2010

Panopto Screen Recordings

Links to my public recordings from Lectures and Training Sessions.

Using screen splitting in MS Word 2010

When working on a long Word document it can be very useful to be able to look at two parts of the file at the same time, use the Screen Split tool to do just this. For best viewing Download the video.

Using the Screen Split tool in MS Word 2011

When working on a long Word document it can be very useful to be able to look at two parts of the file at the same time, use the Screen Split tool to do just this. For best viewing Download the video.