Establishment of environmental and biological bases to optimise the production of the European clam Ruditapes decussatus (Linnaeus, 1758)

Dissertação para obtenção do Grau de Doutor em Ambiente

Bacteriological evaluation of wounds in seriously burned hospitalized patients

During the period between May and December 1988, 21 patients were studied bacteriologically at Hospital João XXIII's burn's unit which belongs to "Fundação Hospitalar do Estado de Minas Gerais" in Belo Horizonte, Brazil. A qualitative and quantitative evaluation of aerobic and facultative bacteria from burn wounds was carried out by the standard filter paper disc technique, including antibiotic susceptibility. At the same time an evaluation of those bacteria isolated from the environmental unit was performed. The most common organisms recovered from wounds of patients were: Pseudomonas aeruginosa, Staphylococcus aureus, and Staphylococcus epidermidis. P. pseudomallei was the most frequent strain recovered from environmental specimens. In nearly all patients specimens (16 in total) from whom P. aeruginosa was isolated, the rate of CFU/cm² of skin was above 10². In nine of these, it reached 10(5), wich is equivalent to 10(7) CFU/g of burned tissue.

Evaluation of air lime and clayish earth mortars for earthen wall renders

CIAV2013 – International Conference on Vernacular Architecture, 7º ATP, VerSus, 16-20 october 2013

Evaluation of pathogenic potential of Aeromonas spp. strains using in vitro methodologies

Dissertation to obtain a Master Degree in Molecular Genetics and Biomedicine

Evaluation of the exploitation potential of red swamp crayfish (Procambarus clarkii) in Portugal

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, perfil de Ordenamento do Território e Impactes Ambientais

Evaluation of an immunochromatography test for malaria diagnosis under different storage conditions

This study aimed to evaluate the second-generation OptiMal test for malaria diagnosis under various storage conditions. It detected all the positive samples, except for two Plasmodium malariae samples. Further research evaluating diverse environmental conditions are important for ICT test applicability in Brazilian malaria areas.

Evaluation of drought tolerance in several genotypes of spelt (Triticum aestivum Var. Spelta)

Domestication of plants and plant breeding have dramatically eroded the allelic variations of crop species which led to an increasing susceptibility of crop plants to environmental stresses, diseases and pests. Drought is a major environmental stress factor that affects the growth and development of plants so the selection of tolerant genotypes becomes increasingly important with respect to the predicted effects of global warming. In this study, several genotypes of Spelt (Triticum aestivum var. spelta) were tested under low water supply in soil with the aim of to find Spelt genotypes more resistant than wheat to these conditions, and select them so that in future may be used to improve wheat crops. Morphological analyses were performed and mineral and enzymatic analyses and also dry matter production were calculated. Our results suggests that the genotypes Sp53, Sp96, Sp912, Sp757 and Sp804 are a potential ones to use in breeding programs to improve wheat production. Under drought, these genotypes had growth efficiency of 38%, 45%, 64%, 37%, and 31% respectively and also showed higher biomass than modern wheat and were also mineralogical richer. The genotypes Sp96 and Sp912 showed highest activity of all antioxidants enzymes tested. This work proves that Spelt is a good wheat to continue to study in order to improve wheat crops in dry areas and consequently increase the quality of life and health of the populations living in those areas.

Diagnosis of Leishmania (Leishmania) chagasi infection in dogs and the relationship with environmental and sanitary aspects in the municipality of Palmas, state of Tocantins, Brazil

INTRODUCTION: The aim of the present study was to identify the presence of Leishmania (Leishmania) chagasi infection in dogs in the City of Palmas, Tocantins, Brazil, using the PCR technique to list the hot spots of infected dogs in the city and associate their occurrence to significant environmental changes at capture sites. METHODS: DNA was extracted from blood of dogs, and the PCR were performed with primers RV1/RV2. After screening the population studied, the regions of the city that had the highest occurrence of canine infection were detected. These sites were visited, and ecological parameters denoting anthropogenic disturbance were evaluated. RESULTS: Some important features were listed in the regions visited, such as low urbanization, lack of public collection of sewage, limited garbage collection, vacant lots with tall vegetation, decaying organic matter, and, most importantly, the occurrence of stray dogs and poultry in homes. CONCLUSIONS: The methodology for screening the population was very efficient, especially in evaluating a large number of individuals in a short time, with a high degree of automation. The results indicate an association between the observed parameters and the occurrence of infection in dogs. The model presented in the city is ideal for studies of disease progression and expansion and for the evaluation of control measures adopted for canine VL.

Seismic evaluation of environmentally degraded FRP-strengthened masonry walls

Fiber Reinforced Polymers (FRPs) have been extensively used for externally bonded reinforcement of masonry structures during the last years. Available information shows that FRPs can significantly improve the seismic performance of masonry elements without altering their structural mass. However, the durability and long-term performance of the strengthened elements are not clearly known yet. Recent experimental results show that environmental conditions can lead to degradation of the bond between FRP and masonry and FRP delaminations. But the effect of these local degradation mechanisms on the global structural response is not studied yet. This paper is therefore aimed at numerically investigating the effect of environmental degradation on the global performance of strengthened masonry walls. The nonlinear behavior of masonry walls strengthened with FRP composites is initially simulated with the aim of a FE package. The adopted numerical modeling strategy is verified by comparison of numerical and experimental results. The model, once validated, is used for investigating the effect of materials and bond degradation on the global behavior and failure modes of strengthened walls. The effect of strengthening scheme on the long-term performance of strengthened walls is also investigated. The degradation data are taken from experimental tests previously performed by the authors. The numerical results show that the effect of local material degradation on the global response of strengthened walls depends on the strengthening schemes, and severity of the environmental conditions. Moreover, environmental induced degradations and FRP delaminations can lead to change of expected failure modes in the strengthened elements. These observations, that are usually neglected at the design stage, can be critical in the long-term performance of strengthened structures.

Evaluation of foamed bitumen efficiency in warm asphalt mixtures recycling

The recycling of pavements is nowadays a very important question to the road paving industry. With the objective of incorporating higher percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures, new techniques have been developed in the last years. The use of foamed bitumen is normally associated with the production of cold asphalt mixtures, which usually show lower quality standards. However, the objective of the work presented in this paper is to assess the use of foamed bitumen as the binder of warm asphalt mixtures incorporating 30% RA, which have quality standards similar to those of conventional mixtures. Thus, five mixtures have been produced with 30% RA, one of them with a conventional bitumen (control mix) and the others with foamed bitumen at different production temperatures. The mixtures were tested for compactability and water sensitivity and the results show a possible reduction of 25 ºC in the production temperatures, while the water sensitivity test results were kept close to 90 %.

Quantitative image analysis as a tool for Yarrowia lipolytica dimorphic growth evaluation in different culture media

Yarrowia lipolytica, a yeast strain with a huge biotechnological potential, capable to produce metabolites such as γ-decalactone, citric acid, intracellular lipids and enzymes, possesses the ability to change its morphology in response to environmental conditions. In the present study, a quantitative image analysis (QIA) procedure was developed for the identification and quantification of Y. lipolytica W29 and MTLY40-2P strains dimorphic growth, cultivated in batch cultures on hydrophilic (glucose and N-acetylglucosamine (GlcNAc) and hydrophobic (olive oil and castor oil) media. The morphological characterization of yeast cells by QIA techniques revealed that hydrophobic carbon sources, namely castor oil, should be preferred for both strains growth in the yeast single cell morphotype. On the other hand, hydrophilic sugars, namely glucose and GlcNAc caused a dimorphic transition growth towards the hyphae morphotype. Experiments for γ-decalactone production with MTLY40-2P strain in two distinct morphotypes (yeast single cells and hyphae cells) were also performed. The obtained results showed the adequacy of the proposed morphology monitoring tool in relation to each morphotype on the aroma production ability. The present work allowed establishing that QIA techniques can be a valuable tool for the identification of the best culture conditions for industrial processes implementation.

Evaluation of antibacterial activity of caffeic acid encapsulated by -cyclodextrins

Context: Caffeic acid is described as antibacterial, but this bioactive molecule has some issues regarding solubility and stability to environmental stress. Thus, encapsulation devices are required. Objective: The aim of this work was to study the effect of the caffeic acid encapsulation by cyclodextrins on its antibacterial activity. Materials and methods: The interactions between the caffeic acid and three cyclodextrins (-cyclodextrin (CD), 2-hydroxypropyl--cyclodextrin (HPCD) and methyl--cyclodextrin were study. Results and discussion: The formation of an aqueous soluble inclusion complex was confirmed for CD and HPCD with a 1:1 stoichiometry. The CD/caffeic acid complex showed higher stability than HPCD/caffeic acid. Caffeic acid antibacterial activity was similar at pH 3 and pH 5 against the three bacteria (K. pneumoniae, S. epidermidis and S. aureus). Conclusions: The antibacterial activity of the inclusion complexes was described here for the first time and it was shown that the caffeic acid activity was remarkably enhanced by the cyclodextrins encapsulation.

A first evaluation on the use of Ardea albus feathers as bioindicators of mercury burden in Amazonian ecosystems

We evaluated in this study the total mercury concentration in feathers of Ardea albus collected in a colony located in the city of Belem-PA, Brazil in a prospective trial for its use as bioindicators of mercury burden in Amazonia ecosystems. An Atomic absorption spectrophotometry with gold amalgamation was used for the metal determination. The total mercury average concentration in body feathers was 2.2 ± 1.5 µg.g-1 and 1.3 ± 0.9 µg.g-1 in wing feathers. No correlation was observed between total mercury concentration and the length of body or wing feathers. Total mercury concentration was above 5 µg.g-1 dry weight in only one body feather sample.

An evaluation of fibrous structure and physical characteristics of Cutia nut (Couepia edulis Prance) shell

The Cutia-nut (Couepia edulis Prance), a species originally from the Amazon region, has a kernel with reasonable nutritional value and a hard and thick woody shell that constitute most of the fruit. After the kernel removal, the shells are regarded as waste. The possibility of using such shells, as raw material for burning or charcoal production, as well as milled residue for structural reinforcement materials is quite feasible, considering environmental and economical aspects. There is, however, a complete lack of characterization of the Cutia-nut shell and other similar species which can aggregate desirable qualities for application as engineering material. In this study some analyses are presented aiming at providing information for potential uses of these residues. In general, the shells follow a regular shape with certain dimensional proportionality to the kernel. The shell is a fibrous material with high lignin content, present low water absorption and high resistance to natural degradation.

Evaluation of geostatistical techniques to estimate the spatial distribution of aboveground biomass in the Amazon rainforest using high-resolution remote sensing data

ABSTRACT The spatial distribution of forest biomass in the Amazon is heterogeneous with a temporal and spatial variation, especially in relation to the different vegetation types of this biome. Biomass estimated in this region varies significantly depending on the applied approach and the data set used for modeling it. In this context, this study aimed to evaluate three different geostatistical techniques to estimate the spatial distribution of aboveground biomass (AGB). The selected techniques were: 1) ordinary least-squares regression (OLS), 2) geographically weighted regression (GWR) and, 3) geographically weighted regression - kriging (GWR-K). These techniques were applied to the same field dataset, using the same environmental variables derived from cartographic information and high-resolution remote sensing data (RapidEye). This study was developed in the Amazon rainforest from Sucumbíos - Ecuador. The results of this study showed that the GWR-K, a hybrid technique, provided statistically satisfactory estimates with the lowest prediction error compared to the other two techniques. Furthermore, we observed that 75% of the AGB was explained by the combination of remote sensing data and environmental variables, where the forest types are the most important variable for estimating AGB. It should be noted that while the use of high-resolution images significantly improves the estimation of the spatial distribution of AGB, the processing of this information requires high computational demand.