Indoor air quality and energy management through real–time sensing in commercial buildings

Rapid growth in the global population requires expansion of building stock, which in turn calls for increased energy demand. This demand varies in time and also between different buildings, yet, conventional methods are only able to provide mean energy levels per zone and are unable to capture this inhomogeneity, which is important to conserve energy. An additional challenge is that some of the attempts to conserve energy, through for example lowering of ventilation rates, have been shown to exacerbate another problem, which is unacceptable indoor air quality (IAQ). The rise of sensing technology over the past decade has shown potential to address both these issues simultaneously by providing high–resolution tempo–spatial data to systematically analyse the energy demand and its consumption as well as the impacts of measures taken to control energy consumption on IAQ. However, challenges remain in the development of affordable services for data analysis, deployment of large–scale real–time sensing network and responding through Building Energy Management Systems. This article presents the fundamental drivers behind the rise of sensing technology for the management of energy and IAQ in urban built environments, highlights major challenges for their large–scale deployment and identifies the research gaps that should be closed by future investigations.

Fraudsters change tactics as a crackdown cuts some losses due to online scams

The amount of financial loss from online fraud suffered by people in Western Australia has almost halved, dropping from A$16.8 million in 2014 to A$9.8 million for 2015, according to a statement this January from the state’s Attorney General and Minister for Commerce, Michael Mischin. In addition, the minister noted that losses from relationship and dating fraud have fallen by 55%, to A$4.9 million lost last year. These are both impressive claims, and at face value, there is truth to the statistics. Both assertions are based on data received by WA’s Scamnet, which is the public interface between consumer protection and citizens. While it is good to see a reduction in the number of losses overall, particularly to relationship and dating fraud, it is highly unlikely that the statistics tell the full story.

Simulation of Dust Loaded V-I Characteristics of a Commercial Thermal Power Plant Precipitator

A new approach based on finite difference method, is proposed for the simulation of electrical conditions in a dc energized wire-duct electrostatic precipitator with and without dust loading. Simulated voltage-curren characteristics with and without dust loading were compared with the measured characteristics for analyzing the performance of a precipitator. The simple finite difference method gives sufficiently accurate results with reduced mesh size. The results for dust free simulation were validated with published experimental data. Further measurements were conducted at a thermal power plant in India and the results compares well with the measured ones.

Accountability for good faith in commercial dealing: The Carter v Boehm legacy 250 years on

In common law jurisdictions such as England, Australia, Canada and New Zealand good faith in contracting has long been recognised in specific areas of the law such as insurance law and franchising, and more recently the implied duties of good faith and mutual trust and convenience in employment contracts have generated a considerable volume of case law. Outside of these areas of law that may be characterised as being strongly‘relational’ in character,the courts in common law jurisdictions have been reluctant to embrace a more universal application of good faith in contracting and performance. However increasingly there are cases which support the proposition that there is a common law duty of good faith of general application to all commercial contracts. Most important in this context is the recent decision of the Supreme Court of Canada in Bhasin v Hrynew.1 However, this matter is by no means resolved in all common law jurisdictions. This article looks at the recent case law and literature and at various legislative incursions including statutes, codes of conduct and regulations impacting good faith in commercial dealings.

Acceleration of ortho ester Claisen rearrangement by a commercial microwave oven

Microwave irradiation, using a commercial microwave oven accelerates (in 10–15 min) the three-step ortho ester Claisen rearrangement of allyl and propynyl alcohols in dry DMF in open Erlenmeyer flasks.

The Commercial Structure of Pedestrian Streets and Shopping Districts - Three Cases from Finland

Kävelykadut ovat tunnustettu tapa elävöittää keskusta-alueiden kauppaa. Aluksi moni kauppias epäilee kävelykadun tuomia muutoksia, mutta kokemus osoittaa, että kävelykadut ovat olleet menestyksekkäitä ja nostavat siellä olevien yritysten myyntiä. Jotkut yritykset eivät kuitenkin hyödy kävelykaduista, kun taas toiset hyötyvät paljon kun katu muuttuu kävelykaduksi. Tämä pro gradu -tutkielma tutkii kävelykatujen kaupallista rakennetta, jotta saataisiin selville minkätyyppiset yritykset löytyvät kävelykadulta. Tuloksia verrataan sen kaupallisen keskusvyöhykkeen kaupalliseen rakenteeseen missä kävelykatu sijaitsee. Näin saadaan selville erot kaupallisessa rakenteessa. Pro gradu tutkii myös miten tavallisia ketjuyritykset ovat kävelykaduilla ja kaupallisissa keskusvyöhykkeissä. Tutkimusaineisto koottiin kaupallisen inventoinnin avulla, joka suoritettiin kolmessa suomalaisessa kaupungissa: Tammisaaressa, Keravalla ja Porissa. Saatu aineisto luokiteltiin ja tulokset piirrettiin kartalle. Perustilastollisia menetelmiä käytettiin tulosten analysoimisessa. Tulokset eriteltiin kävelykadun, kauppakeskusten ja muiden paikkojen osalta ja luokiteltiin yleisluokkiin vähittäiskauppa, ravintola ja muu palvelu. Tulokset näyttävät, että on olemassa selkeitä eroja kun vertaa kävelykatuja ja kaupallisia keskusvyöhykkeitä. Kävelykaduilla on paljon enemmän vähittäiskauppoja, etenkin muotikauppoja, kuin muilla kaduilla. Kauppakeskuksilla on samantapainen kaupallinen rakenne kuin kävelykaduilla kun taas muilla kaduilla esiintyy vähemmän vähittäiskauppoja ja enemmän palveluyrityksiä. Ravintolat ovat melkein yhtä tavallisia koko kaupallisessa keskusvyöhykkeessä. Ketjuyritysten osalta tulokset ovat epäselviä. On olemassa osviittaa siitä, että ne ovat tavallisempia kävelykaduilla, etenkin suurissa kaupungeissa. Saatua tulosta ei ole kuitenkin tarpeeksi, jotta varmaa tietoa olisi saatu. Viimeisten 10–15 vuoden ajan Suomen kävelykadut ovat muuttuneet enemmän ravintolavaltaisiksi muiden palveluiden kustannuksella. Vähittäiskauppojen määrä on pysynyt vakaana. Suomalaiset kävelykadut eroavat kaupalliselta rakenteeltaan pohjoismaisista kävelykaduista, joilla on enemmän vähittäiskauppoja ja vähemmän palveluyrityksiä. Tapauskohtaisissa tuloksissa esiintyy paljon eroavaisuuksia. Paikalliset tekijät ovat usein voimakkaampia kuin yleiset teoriat kauppojen sijainnista kävelykaduilla. Yleisesti ottaen tulokset tukevat teoreettista viitekehystä. Tulokset antavat tarkempaa tietoa kävelykatujen ja kaupallisten keskusvyöhykkeiden kaupallisesta rakenteesta ja siitä, mitkä tekijät tähän vaikuttaa.

Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C

Cylindrical specimens of textured commercial pure alpha-titanium plate, cut with the cylinder axis along the rolling direction for one set of experiments and in the long transverse direction for the other set, were compressed at strain rates in the range of 0.001 to 100 s-1 and temperatures in the range of 25-degrees-C to 400-degrees-C. At strain rates greater-than-or-equal-to 1 s-1, both sets of specimens exhibited adiabatic shear bands, but the intensity of shear bands was found to be higher in the rolling direction specimens than in the long transverse direction specimens. At strain rates -0.1 s-1, the material deformed in a microstructurally inhomogeneous fashion. For the rolling direction specimens, cracking was observed at 100-degrees-C and at strain rates -0.1 s-1. This is attributed to dynamic strain aging. Such cracking was not observed in the long transverse specimens. The differences in the intensity of adiabatic shear bands and that of dynamic strain aging between the two sets of test specimens are attributed to the strong crystallographic texture present in these plates.

Electrochemical Determination of L-Dopa in Mucuna pruriens Seeds, Leaves and Commercial Siddha Product Using Gold Modified Pencil Graphite Electrode

In the present work a gold modified pencil graphite electrode (GPGE) was used for the determination of L-dopa present in the aqueous extracts of Mucuna pruriens seeds (MPS), Mucuna pruriens leaves (MPL) and Commercial Siddha Product (CSP). The GPGE shows excellent electrocatalytic activity towards the oxidation of both L-dopa and ascorbic acid (AA), with the separation of peak potential of 98 mV. The differential pulse voltammetric (DPV) results indicated that the detection limit for L-dopa was 1.54 mu M (S/N=3). This method can be successfully applied for the determination of L-dopa in real samples.

Synthesis and Microstructure of Laser Surface Alloyed Al–Sn–Si Layer on Commercial Aluminum Substrate

A new type of bearing alloy containing ultrafine sized tin and silicon dispersions in aluminum was designed using laser surface alloying and laser remelting techniques. The microstructures of these non-equilibrium processed alloys were studied in detail using scanning and transmission electron microscopy. The microstructures revealed three distinct morphologies of tin particles namely elongated particles co-existing with silicon, globular particles, and very fine particles. Our detailed analyses using cellular growth theories showed that the formation of these globular tin particles was due to the pinching off of the tin rich liquid in the inter-cellular space by the growth of aluminum secondary dendrite arms. Evidence of fine recrystallized aluminum grains at the top layer due to constrained solidification was shown. Thermal analyses suggested that melting of the spherical shaped tin particles was controlled by the binary aluminum-tin eutectic reaction, whereas non-spherical tin particles melted via the tin-silicon eutectic reaction.

Expediency of Penetration Ratio and Evaluation of Mean Throughput for Safety and Commercial Applications in VANETs

Vehicular ad hoc network (VANET) applications are principally categorized into safety and commercial applications. Efficient traffic management for routing an emergency vehicle is of paramount importance in safety applications of VANETs. In the first case, a typical example of a high dense urban scenario is considered to demonstrate the role of penetration ratio for achieving reduced travel time between source and destination points. The major requirement for testing these VANET applications is a realistic simulation approach which would justify the results prior to actual deployment. A Traffic Simulator coupled with a Network Simulator using a feedback loop feature is apt for realistic simulation of VANETs. Thus, in this paper, we develop the safety application using traffic control interface (TraCI), which couples SUMO (traffic simulator) and NS2 (network simulator). Likewise, the mean throughput is one of the necessary performance measures for commercial applications of VANETs. In the next case, commercial applications have been considered wherein the data is transferred amongst vehicles (V2V) and between roadside infrastructure and vehicles (I2V), for which the throughput is assessed.