992 resultados para co substitution
Resumo:
The chemically reversible solid−solid phase transformation of a TCNQ-modified glassy carbon, indium tin oxide, or metal electrode into Co\[TCNQ]2(H2O)2 material in the presence of Co2+(aq) containing electrolytes has been induced and monitored electrochemically. Voltammetric data reveal that the TCNQ/Co\[TCNQ]2(H2O)2 interconversion process is independent of electrode material and identity of cobalt electrolyte anion. However, a marked dependence on electrolyte concentration, scan rate, and method of electrode modification (drop casting or mechanical attachment) is found. Cyclic voltammetric and double potential step chronoamperometric measurements confirm that formation of Co\[TCNQ]2(H2O)2 occurs through a rate-determining nucleation and growth process that initially involves incorporation of Co2+(aq) ions into the reduced TCNQ crystal lattice at the TCNQ|electrode|electrolyte interface. Similarly, the reverse (oxidation) process, which involves transformation of solid Co\[TCNQ]2(H2O)2 back to parent TCNQ crystals, also is controlled by nucleation−growth kinetics. The overall chemically reversible process that represents this transformation is described by the reaction: 2TCNQ0(s) + 2e- + Co2+(aq) + 2H2O \[Co(TCNQ)2(H2O)2](s). Ex situ SEM images illustrated that this reversible TCNQ/Co\[TCNQ]2(H2O)2 conversion process is accompanied by drastic size and morphology changes in the parent solid TCNQ. In addition, different sizes of needle-shaped nanorod/nanowire crystals of Co\[TCNQ]2(H2O)2 are formed depending on the method of surface immobilization.
Resumo:
In situ atomic force microscopy (AFM) allows images from the upper face and sides of TCNQ crystals to be monitored during the course of the electrochemical solid–solid state conversion of 50 × 50 μm2 three-dimensional drop cast crystals of TCNQ to CuTCNQ or M[TCNQ]2(H2O)2 (M = Co, Ni). Ex situ images obtained by scanning electron microscopy (SEM) also allow the bottom face of the TCNQ crystals, in contact with the indium tin oxide or gold electrode surface and aqueous metal electrolyte solution, to be examined. Results show that by carefully controlling the reaction conditions, nearly mono-dispersed, rod-like phase I CuTCNQ or M[TCNQ]2(H2O)2 can be achieved on all faces. However, CuTCNQ has two different phases, and the transformation of rod-like phase 1 to rhombic-like phase 2 achieved under conditions of cyclic voltammetry was monitored in situ by AFM. The similarity of in situ AFM results with ex situ SEM studies accomplished previously implies that the morphology of the samples remains unchanged when the solvent environment is removed. In the process of crystal transformation, the triple phase solid∣electrode∣electrolyte junction is confirmed to be the initial nucleation site. Raman spectra and AFM images suggest that 100% interconversion is not always achieved, even after extended electrolysis of large 50 × 50 μm2 TCNQ crystals.
Resumo:
In this paper, we have investigated on the natural wendwilsonite mineral with the formulae Ca2(Mg,Co)(AsO4)2⋅2(H2O). Raman spectroscopy complimented with infrared spectroscopy has been used to determine the molecular structure of the wendwilsonite arsenate mineral. A comparison is made with the roselite mineral group with formula Ca2B(AsO4)2⋅2H2O (where B may be Co, Fe2+, Mg, Mn, Ni, Zn). The Raman spectra of the arsenate related to tetrahedral arsenate clusters with stretching region shows strong differences between that of wendwilsonite and the roselite arsenate minerals which is attributed to the cation substitution for calcium in the structure. The Raman arsenate (AsO4)3− stretching region shows strong differences between that of wendwilsonite and the roselite arsenate minerals which is attributed to the cation substitution for calcium in the structure. In the infrared spectra complexity exists of multiple to tetrahedral (AsO4)3− clusters with antisymmetric stretching vibrations observed indicating a reduction of the tetrahedral symmetry. This loss of degeneracy is also reflected in the bending modes. Strong Raman bands around 450 cm−1 are assigned to ν4 bending modes. Multiple bands in the 350–300 cm−1 region assigned to ν2 bending modes provide evidence of symmetry reduction of the arsenate anion. Three broad bands for wendwilsonite found at 3332, 3119 and 3001 cm−1 are assigned to OH stretching bands. By using a Libowitzky empirical equation, hydrogen bond distances of 2.65 and 2.75 Å are estimated. Vibrational spectra enable the molecular structure of the wendwilsonite mineral to be determined and whilst similarities exist in the spectral patterns with the roselite mineral group, sufficient differences exist to be able to determine the identification of the minerals.
Resumo:
Childbirth is an extraordinary, everyday experience; in 2011, 301 617 infants were born in Australia [1], resulting in countless potential occurrences of sleep disturbance and subsequent daytime sleepiness. While the relationship between sleep and sleepiness has been heavily investigated in the vulnerable sub-populations of shift workers and patients with sleep disorders, comparatively postpartum women have been overlooked. Previous research has reported slower reaction times to the Psychomotor Vigilance Task [2] and shorter sleep onset in the multiple sleep latency test [3] in new mothers compared with control women. However little is known about change in sleep and sleepiness over time or potential interactions with infant care behaviour choices, such as co-sleeping (mother and infant sharing a bed). This study aims to investigate change in new mothers sleep quantity, sleep quality and resulting daytime sleepiness over postpartum weeks 6, 12 and 18, while evaluating the impact of co-sleeping.
Resumo:
Defining success in mega projects has been a challenging exercise for Australian Defence. The inherent conflict between nation capability building and cost efficiency raises questions about how to appropriately define mega project success. Contrary to the traditional output-focused project methodology, the value creation perspective argues for the importance of creating new knowledge, processes, and systems for suppliers and customers. Stakeholder involvement is important in this new perspective, as the balancing of competing needs of stakeholders in mega projects becomes a major challenge in managing the value co-creation process. In our earlier study reported interview data from three Australian defence mega projects and reported that those senior executives have a more complex understanding of project success than traditional iron triangle measures. In these mega defence projects, customers and other stakeholders actively engage in the value creation process, and over time both content and process value are created to increase defence and national capability. Value created and captured during and post projects are the key to true success. We aim to develop a comprehensive theoretical model the capture the value co-creation process as a way of re-conceptualising success in mega projects. We propose a new framework redefine project value as multi-dimensional, contextual and temporal construct that emerges from the interactions among multiple stake holders over the complete project life cycle. The framework distinguishes between exploitation and exploration types of projects, and takes into consideration the requisite governance structures.
Resumo:
Aims: To report cancer-specific and health-related quality-of-life outcomes in patients undergoing radical chemoradiation (CRT) alone for oesophageal cancer. Materials and methods: Between 1998 and 2005, 56 patients with oesophageal cancer received definitive radical CRT, due to local disease extent, poor general health, or patient choice. Data from European Organization for Research and Treatment of Cancer quality-of-life questionnaires QLQ-30 and QLQ-OES24 were collected prospectively. Questionnaires were completed at diagnosis, and at 3, 6 and 12 months after CRT where applicable. Results: The median follow-up was 18 months. The median overall survival was 14 months, with a 51, 26 and 13% 1-, 3- and 5-year survival, respectively. At 12 months after treatment there was a significant improvement compared with before treatment with respect to dysphagia and pain. Global health scores were not significantly affected. Conclusions: Considering the relatively short long-term survival for this cohort of patients, maximising the quality of those final months should be very carefully borne in mind from the outset. The health-related quality-of-life data reported herein helps to establish benchmarks for larger evaluation within randomised clinical trials. © 2007 The Royal College of Radiologists.
Resumo:
In this paper we will examine passenger actions and activities at the security screening points of Australian domestic and international airports. Our findings and analysis provide a more complete understanding of the current airport passenger security screening experience. Data in this paper is comprised of field studies conducted at two Australian airports, one domestic and one international. Video data was collected by cameras situated either side of the security screening point. A total of one hundred and ninety-six passengers were observed. Two methods of analysis are used. First, the activities of passengers are coded and analysed to reveal the common activities at domestic and international security regimes and between quiet and busy periods. Second, observation of passenger activities is used to reveal uncommon aspects. The results show that passengers do more at security screening that being passively scanned. Passengers queue, unpack the required items from their bags and from their pockets, walk through the metal-detector, re-pack and occasionally return to be re-screened. For each of these activities, passengers must understand the procedures at the security screening point and must co-ordinate various actions and objects in time and space. Through this coordination passengers are active participants in making the security checkpoint function – they are co-producers of the security screening process.
Resumo:
Participatory digital culture presents major challenges to all traditional media outlets, but it presents very direct challenges to the community broadcast sector, which was established from the outset as local, community-driven and participatory. These and other issues were the focus of a recent forum at the Australian Centre for the Moving Image in Melbourne (Co-Creative Communities, 8–9 November 2012). The forum was part of a national research project, which has been exploring how Australian community arts and media organisations are responding to participatory digital culture, social media and user-led innovation. Focusing on the organisations who presented at the symposium, the paper examines how community-interest media is making the most of new and social media platforms. It considers examples of participatory digital media that have emerged from the community broadcast sector, but it also considers local, collaborative, community-interest media projects developed by public broadcasters and organisations involved in arts, social justice and development. Drawing on forum transcripts and follow-up research the essay describes some of the key trends shaping how community-interest media organisations and independent producers are working with participatory digital culture, and with what success.
Resumo:
We have tested a methodology for the elimination of the selectable marker gene after Agrobacterium-mediated transformation of barley. This involves segregation of the selectable marker gene away from the gene of interest following co-transformation using a plasmid carrying two T-DNAs, which were located adjacent to each other with no intervening region. A standard binary transformation vector was modified by insertion of a small section composed of an additional left and right T-DNA border, so that the selectable marker gene and the site for insertion of the gene of interest (GOI) were each flanked by a left and right border. Using this vector three different GOIs were transformed into barley. Analysis of transgene inheritance was facilitated by a novel and rapid assay utilizing PCR amplification from macerated leaf tissue. Co-insertion was observed in two thirds of transformants, and among these approximately one quarter had transgene inserts which segregated in the next generation to yield selectable marker-free transgenic plants. Insertion of non-T-DNA plasmid sequences was observed in only one of fourteen SMF lines tested. This technique thus provides a workable system for generating transgenic barley free from selectable marker genes, thereby obviating public concerns regarding proliferation of these genes.
Resumo:
Forming peer alliances to share and build knowledge is an important aspect of community arts practice, and these co-creation processes are increasingly being mediated by the internet. This paper offers guidance for practitioners who are interested in better utilising the internet to connect, share, and make new knowledge. It argues that new approaches are required to foster the organising activities that underpin online co-creation, building from the premise that people have become increasingly networked as individuals rather than in groups (Rainie and Wellman 2012: 6), and that these new ways of connecting enable new modes of peer-to-peer production and exchange. This position advocates that practitioners move beyond situating the internet as a platform for dissemination and a tool for co-creating media, to embrace its knowledge collaboration potential. Drawing on a design experiment I developed to promote online knowledge co-creation, this paper suggests three development phases – developing connections, developing ideas, and developing agility – to ground six methods. They are: switching and routing, engaging in small trades of ideas with networked individuals; organising, co-ordinating networked individuals and their data; beta-release, offering ‘beta’ artifacts as knowledge trades; beta-testing, trialing and modifying other peoples ‘beta’ ideas; adapting, responding to technological disruption; and, reconfiguring, embracing opportunities offered by technological disruption. These approaches position knowledge co-creation as another capability of the community artist, along with co-creating art and media.
Resumo:
Abstract OBJECTIVE: Those with mental illness are at increased risk of physical health problems. The current study aimed to examine the information available online to the Australian public about the increased risk and consequences of physical illness in those with mental health problems and the services available to address these co-morbidities. METHODS: A structured online search was conducted with the search engine Google Australia (www.google.com.au) using generic search terms 'mental health information Australia', 'mental illness information Australia', 'depression', 'anxiety', and 'psychosis'. The direct content of websites was examined for information on the physical co-morbidities of mental illness. All external links on high-profile websites [the first five websites retrieved under each search term (n = 25)] were examined for information pertaining to physical health. RESULTS: Only 4.2% of websites informing the public about mental health contained direct content information about the increased risk of physical co-morbidities. The Australian Government's Department of Health and Ageing site did not contain any information. Of the high-profile websites, 62% had external links to resources about physical health and 55% had recommendations or resources for physical health. Most recommendations were generic. CONCLUSIONS: Relative to the seriousness of this problem, there is a paucity of information available to the public about the increased physical health risks associated with mental illness. Improved public awareness is the starting point of addressing this health inequity.
Resumo:
Networked identity work is the conscious negotiation or co-creation of identity, enacted by speaking and listening across differences among multiple publics, including those real and imagined, familiar and unknown, on and offline, present and future. It is a concept I explore extensively in research with queer Digital Storytellers who share their personal stories in public places to catalyse social change (Vivienne 2013). In this article I consider distinctions between ‘story’ and ‘identity’; ‘networking’ and ‘networked identity work’ and argue that the two concepts may be usefully employed in development of co-creative community projects. Finally I consider how variable definitions of co-creativity influence project development.
Resumo:
A new method for the direct aryl iodination of isoindolines and isoindoline nitroxides which utilizes periodic acid and potassium iodide in sulfuric acid is presented. Di-iodo functionalized tetramethyl and tetraethyl isoindolines and a di-iodo tetramethyl isoindoline nitroxide were prepared in high yield (70-82%). The analogous mono-iodo species were afforded in modest yield (34-48%). Iodinated nitrones were also obtained from a tetraethyl isoindoline nitroxide.
Resumo:
This article describes how - in the processes of responding to participatory storytelling practices - community, public service, and to a lesser extent, commercial media institutions are themselves negotiated and changed. Although there are significant variations in the conditions, durability, extent, motivations and quality of these developments and their impacts, they nonetheless increase the possibilities and pathways of participatory media culture. This description first frames digital storytelling as a ‘co-creative’ media practice. It then discusses the role of community arts and cultural development (CACD) practitioners and networks as co-creative media intermediaries, and then considers their influence in Australian broadcast and Internet media. It looks at how participatory storytelling methods are evolving in the Australian context and explores some of the implications for cultural inclusion arising from a shared interest in ‘co-creative’ media methods and approaches.