Ultrasound-assisted synthesis of aliphatic acid esters at room temperature

This work describes the ultrasound-assisted synthesis of saturated aliphatic esters from synthetic aliphatic acids and either methanol or ethanol. The products were isolated in good yields after short reaction times under mild conditions. (C) 2011 Elsevier BM. All rights reserved.

Isocyanates and Amines – Sampling and Analytical Procedures

This thesis covers sampling and analytical procedures for isocyanates (R-NCO) and amines (R-NH2), two kinds of chemicals frequently used in association with the polymeric material polyurethane (PUR). Exposure to isocyanates may result in respiratory disorders and dermal sensitisation, and they are one of the main causes of occupational asthma. Several of the aromatic diamines associated with PUR production are classified as suspected carcinogens. Hence, the presence of these chemicals in different exposure situations must be monitored. In the context of determining isocyanates in air, the methodologies included derivatisation with the reagent di-n-butylamine (DBA) upon collection and subsequent determination using liquid chromatography (LC) and mass spectrometric detection (MS). A user-friendly solvent-free sampler for collection of airborne isocyanates was developed as an alternative to a more cumbersome impinger-filter sampling technique. The combination of the DBA reagent together with MS detection techniques revealed several new exposure situations for isocyanates, such as isocyanic acid during thermal degradation of PUR and urea-based resins. Further, a method for characterising isocyanates in technical products used in the production of PUR was developed. This enabled determination of isocyanates in air for which pure analytical standards are missing. Tandem MS (MS/MS) determination of isocyanates in air below 10-6 of the threshold limit values was achieved. As for the determination of amines, the analytical methods included derivatisation into pentafluoropropionic amide or ethyl carbamate ester derivatives and subsequent MS analysis. Several amines in biological fluids, as markers of exposure for either the amines themselves or the corresponding isocyanates, were determined by LC-MS/MS at amol level. In aqueous extraction solutions of flexible PUR foam products, toluene diamine and related compounds were found. In conclusion, this thesis demonstrates the usefulness of well characterised analytical procedures and techniques for determination of hazardous compounds. Without reliable and robust methodologies there is a risk that exposure levels will be underestimated or, even worse, that relevant compounds will be completely missed.

Halogenated aliphatic and aromatic aerobic biodegradation via direct metabolism and cometabolism: batch and continuous tests

In this thesis the application of biotechnological processes based on microbial metabolic degradation of halogenated compound has been investigated. Several studies showed that most of these pollutants can be biodegraded by single bacterial strains or mixed microbial population via aerobic direct metabolism or cometabolism using as a growth substrates aromatic or aliphatic hydrocarbons. The enhancement of two specific processes has been here object of study in relation with its own respective scenario described as follow: 1st) the bioremediation via aerobic cometabolism of soil contaminated by a high chlorinated compound using a mixed microbial population and the selection and isolation of consortium specific for the compound. 2nd) the implementation of a treatment technology based on direct metabolism of two pure strains at the exact point source of emission, preventing dilution and contamination of large volumes of waste fluids polluted by several halogenated compound minimizing the environmental impact. In order to verify the effect of these two new biotechnological application to remove halogenated compound and purpose them as a more efficient alternative continuous and batch tests have been set up in the experimental part of this thesis. Results obtained from the continuous tests in the second scenario have been supported by microbial analysis via Fluorescence in situ Hybridisation (FISH) and by a mathematical model of the system. The results showed that both process in its own respective scenario offer an effective solutions for the biological treatment of chlorinate compound pollution.

Asymmetric synthesis of benzylic and heterobenzylic amines

C2-Symmetrical, enantiopure 2,6-di[1-(1-aziridinyl)alkyl]pyridines (DIAZAPs) were prepared by a high-yielding, three-step sequence starting from 2,6-pyridinedicarbaldehyde and (S)-valinol or (S)-phenylglycinol. The new compounds were tested as ligands in palladium-catalyzed allylation of carbanions in different solvents. Almost quantitative yield and up to 99% enantiomeric excess were obtained in the reactions of the enolates derived from malonate, phenyl- and benzylmalonate dimethyl esters with 1,3-diphenyl-2-propenyl ethyl carbonate. Asymmetric synthesis of 2-(2-pyridyl)aziridines from chiral 2-pyridineimines bearing a stereogenic center at the nitrogen atom was development. The envisioned route involves the addition of chloromethyllithium to the imine derived from 2-pyridinealdehyde and (S)-valinol, protected as O-trimethylsilyl ether. The analogous reaction performed on the imine derived from (S)-valine methyl ester gave the product containing the aziridine ring as well as the α-chloro ketone group coming from the attack of chloromethyllithium to the ester function. Other stereogenic alkyl substituents at nitrogen gave less satisfactory results. Moreover, the aziridination protocol did not work on other aromatic imines, e.g. 3-pyridineimine and benzaldimine, which are not capable of bidentate chelation. The N-substituent could not be removed, but aziridine underwent ring-opening by attack of nitrogen, sulfur, and oxygen nucleophiles. Complete or prevalent regioselectivity was obtained using cerium trichloride heptahydrate as a catalyst. In some cases, the N-substituent could be removed by an oxidative protocol. The addition of organometallic (lithium, magnesium, zinc) reagents to 2-pyrroleimines derived from (S)-valinol and (S)-phenylglycinol gave the N-substituted-1-(2-pyrrolyl)alkylamines with high yields and diastereoselectivities. The (S,S)-diastereomers were useful intermediates for the preparation of enantiopure 1-[1-(2-pyrrolyl)alkyl]aziridines by routine cyclization of the β-aminoalcohol moiety and of (S)-N-benzoyl 1-[1-(2-pyrrolyl)alkyl]amines and their N-substituted derivatives by oxidative cleavage of the chiral auxiliary. 1-Allyl-2-pyrroleimines obtained from (S)-phenylglycinol and (S)-valinol underwent highly diastereoselective addition of allylmetal reagents, used in excess amounts, to give the corresponding secondary amines with concomitant allyl to 1-propenyl isomerisation of the 1-pyrrole substituent. Protection of the 2-aminoalcohol moiety as oxazolidinone, amide or Boc derivate followed by ring closing metathesis of the alkene groups gave the unsaturated bicyclic compound, whose hydrogenation afforded the indolizidine derivative as a mixture of separable diastereomers. The absolute configuration of the main diastereomer was assessed by X-ray crystallographic analysis.

Novel etheroatom containing aliphatic polyesters for biomedical and environmental applications

Biodegradable polymers for short time applications have attracted much interest all over the world. The reason behind this growing interest is the incompatibility of the polymeric wastes with the environment where they are disposed after usage. Synthetic aliphatic polyesters represent one of the most economically competitive biodegradable polymers. In addition, they gained considerable attention as they combine biodegradability and biocompatibility with interesting physical and chemical properties. In this framework, the present research work focused on the modification by reactive blending and polycondensation of two different aliphatic polyesters, namely poly(butylene succinate) (PBS) and poly(butylene 1,4-cyclohexanedicarboxylate) (PBCE). Both are characterized by good thermal properties, but their mechanical characteristics do not fit the requirements for applications in which high flexibility is requested and, moreover, both show slow biodegradation rate. With the aim of developing new materials with improved characteristics with respect to the parent homopolymers, novel etheroatom containing PBS and PBCE-based fully aliphatic polyesters and copolyesters have been therefore synthesized and carefully characterized. The introduction of oxygen or sulphur atoms along the polymer chains, by acting on chemical composition or molecular architecture, tailored solid-state properties and biodegradation rate: type and amount of comonomeric units and sequence distribution deeply affected the material final properties owing, among all, to the hydrophobic/hydrophilic ratio and to the different ability of the polymer to crystallize. The versatility of the synthesized copolymers has been well proved: as a matter of fact these polymers can be exploited both for biomedical and ecological applications. Feasibility of 3D electrospun scaffolds has been investigated, biocompatibility studies and controlled release of a model molecule showed good responses. As regards ecological applications, barrier properties and eco-toxicological assessments have been conducted with outstanding results. Finally, the ability of the novel polyesters to undergo both hydrolytic and enzymatic degradation has been demonstrated under physiological and environmental conditions.

Synthese C-glycosidischer und N-methylierter Glycosylaminosäuren für den Aufbau von Mimetika tumorassoziierter MUC1-Glycopeptidantigene unter Verwendung mikrostrukturierter Reaktoren

Zur Synthese hydrolysestabiler MUC1-Antitumorvakzine wurde im Rahmen dieser Arbeit zunächst ein Verfahren zur effizienten N Methylierung von Fmoc-Aminosäuren entwickelt. Die Synthese erfolgte in einer zweistufigen Umsetzung über Oxazolidinone unter Verwendung eines Tube-in-Tube-Durchflussreaktors mit einer semipermeablen Membran aus Teflon® AF 2400. In diesem Tube-in-Tube-Reaktor wurde in der ersten Stufe das Modellsubstrat Fmoc-Alanin bereits nach 2 h annähernd quantitativ in das entsprechende Oxazolidinon umgesetzt. In der zweiten Stufe wurde mit TFA erstmals eine Flüssigkeit durch eine solche Membran des Tube-in-Tube-Reaktors eingeleitet und lieferte innerhalb einer Stunde zahlreiche aliphatische, aromatische und funktionalisierte N-Methylaminosäuren in hohen Ausbeuten.rnDes Weiteren wurden erstmals sensible Glycosylaminosäuren, darunter auch TN Antigen-Strukturen, N-methyliert. Sie dienen als Bausteine für die Synthese von MUC1-Antitumorvakzinen. Neben Fmoc-N-Methyl-TN-Threonin konnten die Fmoc-geschützten N-Methyl-TN-Serin, N-Methyl-Sialyl-TN-Threonin sowie zwei N-Methyl-C Glycosylaminosäuren und in guten Ausbeuten erhalten werden. Anschließend wurde das N methylierte TN-Threonin gezielt in die tandem repeat-Sequenz des MUC1 in einer Festphasenpeptidsynthese eingebaut. Um einen direkten Vergleich bezüglich der N Methylierung im MUC1-Glycopeptide und dem darauf folgenden Einfluss auf die Tumorselektivität der resultierenden Vakzine erhalten zu können, wurde zudem ein Referenzpeptid aufgebaut. Zur Vollendung der Vakzinsynthese erfolgte die Konjugation beider Glycopeptidantigene an die jeweiligen BSA- und TTox-Proteine. rnEin alternativer Zugang zu hydrolysestabilen Glycopeptidbausteinen wurde im letzten Teil der Arbeit über die Synthese von α C Glycosylaminosäuren erarbeitet. Der entwickelte Syntheseweg basiert auf einer Ugi-Vier-Komponenten-Reaktion aus Aldehyd, Amin, Nitril und Carbonsäure. Als benötigte Aldehydkomponenten wurden ein einfaches Galactose- sowie ein Galactosamin-Derivat verwendet. Zum Aufbau des C-glycosidischen Grundgerüsts wurde eine Mikrowellen-unterstützte C-Allylierungsvariante im Durchfluss realisiert. Die Galactose- und Galactosaminaldehyde wurden danach mit chirale Glycosylaminen umgesetzt.

Elektrochemische Desoxygenierung von Carbonsäureamiden und verwandten Verbindungen an der dekorierten Bleikathode

Zusammenfassung der Dissertation, Carolin Edinger, April 2015. Im Rahmen der Dissertation ist eine effiziente und zuverlässige Methode zur elektrochemischen Desoxygenierung von aromatischen Carbonsäureamiden entwickelt worden (Schema 1).[1] Unter galvanostatischen Bedingungen eignet sich das optimierte Elektrolytsystem bestehend aus 2%iger methanolischer H2SO4 und geringen Mengen an Additiv 1 in Kombination mit einer Bleikathode hervorragend in dem gewählten geteilten Zellaufbau. Schema 1: Elektrochemische Desoxygenierung aromatischer Carbonsäureamide. Untersuchungen an verschiedensten Amidsubstraten haben gezeigt, dass ein breites Spektrum an Aminen mit dieser Methode zugänglich ist und durch umfangreiche Studien konnten optimale Elektrolyseparameter gefunden werden. Außerdem wurde die Hochskalierung der Ansatzgröße an einem Testsubstrat mit hohen Aminausbeuten von bis zu 73% gewährleistet. Ein besonderes Merkmal der entwickelten Synthese ist neben milden Bedingungen und hoher Selektivität die Verwendung von Ammoniumsalzadditiven. Der positive Effekt dieser Additive auf die Desoxygenierungsreaktion ist vielfältig: Die Wasserstoffentwicklung als unerwünschte Nebenreaktion wird zu negativeren Potentialen verschoben und die Bleikathode wird durch Zurückdrängung der PbSO4-Bildung effektiv vor Korrosion geschützt. Dies konnte durch experimentelle Werte wie die Erhöhung der Produkt- und Stromausbeute durch Additivzusatz während der Elektrolyse hinreichend bestätigt werden. Aber auch zyklovoltammetrische Untersuchungen und Lichtmikroskopaufnahmen der Elektrodenoberfläche bekräftigen eindeutig diese Aussagen.[2,3] Die entwickelte elektrochemische Methode konnte zusätzlich erfolgreich auf Verbindungen übertragen werden, die mit Carbonsäureamiden verwandt sind. So gelang es, aromatische und aliphatische Sulfoxide in sehr guten Ausbeuten selektiv zu den entsprechenden Sulfiden umzusetzen. Zusätzlich konnten bereits bei weiteren, durch klassische Methoden schwer reduzierbare Stoffklassen erste Erfolge erzielt werden. So gelang es, den Grundstein zur Reduktion von Estern und Triphenylphosphinoxid zu legen und erste, vielversprechende Ergebnisse zu erlangen. Da Elektronen als Reduktionsmittel eingesetzt werden und lediglich Wasser als Nebenprodukt gebildet wird, zeichnet sich die entwickelte Desoxygenierungsmethode vor allem durch milde Bedingungen und hohe Selektivität aus. Da weder Reagenzien noch Katalysatoren verwendet werden müssen, werden Abfälle vermieden. Dadurch ist die gefundene Reduktionsmethode nicht nur kostengünstig, sondern erweist sich auch in der Reaktionsführung als vorteilhaft. Literatur: [1] C. Edinger, S. R. Waldvogel, Eur. J. Org. Chem. 2014, 2014, 5144–5148. [2] C. Edinger, V. Grimaudo, P. Broekmann, S. R. Waldvogel, ChemElectroChem 2014, 1, 1018–1022. [3] C. Edinger, S. R. Waldvogel, PCT Int. Appl. 2013, WO 2013030316A2.

Enzymatic Activity of Soybean Lipoxygenase-1 on Linoleoyl-Derivatized Agarose

Soybean lipoxygenase-1 (SBLO-1) catalyzes the oxygenation of linoleic acid to form 13(S) and 9(R) hydroperoxides. The manner in which substrates bind to the lipoxygenase family of enzymes is not known. It is believed fatty acid substrates may bind either with the aliphatic end first or with the carboxylate group facing the interior of the protein. This thesis tested a potential methyl-end first substrate binding mechanism by studying the activity of SBLO-1 to oxygenate immobilized linoleoyl residues attached to an insoluble polymer. Linoleic acid was attached to aminohexyl agarose in the presence of N-(3- dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (EDC) and Nhydroxysuccinimide (NHS). The concentration of the covalently attached residues was facilitated by enriching linoleic acid with a small amount of the radioactive 14C-isotope. Functionalization yields of 3% available primary amines on the resin were obtained. Enzymatic oxygenation of the linoleoyl-residues was verified using the ferrous oxidation in xylenol orange (FOX) assay. Approximately 30% of the attached linoleoyl moieties were converted to hydroperoxides in the presence of SBLO-1. A disulfide-containing cleavable linker, cystamine, was used as part of an improved method to isolate the product in a facile manner. Cystamine was attached to NHS-activated agarose with approximately 5% overall functionalization yield of available functional groups. 14C-linoleic acid was successfully covalently linked to the cystamine moieties in the presence of EDC and NHS. The FOX assay verified the enzymatic oxygenation of the linoleoyl residues attached to cystamine-derivatized agarose. The isolation of the peroxide product was attempted in a series of extractions in organic solvents. The product was analyzed using GC/MS which did not show a new peak indicative of product. Further work is needed to successfully analyze the stereoand regiochemistry of the oxygenated product. The presence of the peroxides in this study indicated the linoleoyl residues behave as substrates of SBLO-1. It is unknown how bulky substrates bind to the active site; however, it is difficult to rationalize a carboxylate group-first binding mode. Discovery of the 13(S)-hydroperoxide product on the linoleoyl-agarose would support the claim of a potential methyl-end first binding mechanism.

Alternate, Easy and practical synthesis of allyl amines from acetyl derivatives of Baylis-Hillman adducts using Methanolic Ammonia

A methanolic ammonia-mediated alternate, easy and practical stereoselective synthesis of allyl amines from the acetyl derivatives of Baylis-Hillman adducts is described.

A reinvestigation into the reaction of NH4OAc with acetyl derivatives of Bay-lis-Hillman adducts: Formation of tertiary and secondary allyl amines in-stead of primary allyl amines

A reinvestigation into the reaction between ammonium acetate and the acetyl derivatives of Baylis-Hillman adducts has led us to conclude that the products obtained are tertiary and secondary allyl amines and not the primary allyl amines. The unambiguous assignment of the structure of products using chemical and spectroscopic methods is described

Aza-Michael addition of amines to activated alkenes catalyzed by Silica supported perchloric acid under a solvent-free condition

An efficient aza-Michael addition of amines to a series of ,-unsaturated ketones, carboxylic esters, nitriles and chalcones has been carried out using perchloric acid supported over silica gel (HClO4-SiO2) at room temperature in high yields under solvent-free reaction conditions.

Application of primary allyl amines afforded by the Baylis-Hillman adducts for heterocyclic synthesis: Generation of 5-benzyl-4(3H)-pyrimidinones and 2-benzylidene-2,3-dihydro-pyrrolizin-1-ones

The applications of the primary allyl amines afforded by the acetyl derivative of Baylis-Hillman adducts of acrylate for the synthesis of heterocycles using robust reactions are described. In the first strategy a one-pot synthesis of 5-benzyl-4(3H)-pyrimidinones have been achieved via N-formylation of the amines in the presence of neat formamide followed by ammonium formate-mediated cyclization. These pyrimidinones have been demonstrated to be excellent precursor to the 4-pyridinamine derivatives. In the second strategy the synthesis of 2-benzylidene-2,3-dihydro-pyrrolizin-1-ones have been accomplished via treatment of allyl amine with dimethoxyfuran followed by saponification and PPA-mediated intramolecular cyclization.