Fabricación y reparación de geometrías complejas mediante aporte por laser.

El láser cladding es una tecnología en alza. Mediante la energía de una radiación láser, se crea un baño fundido de material que, combinado con la inyección de material en polvo a través de una boquilla y controlando el movimiento a través de la programación de una plataforma cinemática, ofrece la posibilidad de fabricar una geometría determinada mediante la adición de material. Se trata, sin embargo, de un proceso complejo en el que intervienen gran cantidad de fenómenos físicos y resulta complicado obtener un buen resultado en trayectorias complejas. En el presente trabajo se ha tratado el proceso de fabricación de una geometría compleja tipo álabe de turbina. Para ello, se ha comenzado por llevar a cabo una revisión bibliográfica, posteriormente, se han llevado a cabo una serie de ensayos experimentales para la determinación de parámetros de proceso, y finalmente, se ha desarrollado una estrategia de aporte original para estructuras tipo álabe que permite garantizar la estabilidad del proceso. En base a los resultados satisfactorios obtenidos, se ha concluido que mediante la aplicación de la nueva estrategia es posible la generación de geometrías complejas con alto grado de estabilidad.

Motion simulation of annular polishing

Based on the Coulomb friction model, the frictional motion model of workpiece relating to the polishing pad was presented in annular polishing. By the dynamic analysis software, the model was simulated and analysed. The conclusions from the results were that the workpiece did not rotate steadily. When the angular velocity of ring and the direction were the same as that of the polishing pad, the angular velocity of workpiece hoicked at the beginning and at the later stage were the same as that of the polishing pad before contacting with the ring. The angular velocity of workpiece vibrated at the moment of contacting with the ring. After that the angular velocity of workpiece increased gradually and fluctuated at a given value, while the angular velocity of ring decreased gradually and also fluctuated at a given value. Since the contact between the workpiece and the ring was linear, their linear velocities and directions should be the same. But the angular velocity of workpiece was larger than that of the polishing pad on the condition that the radius of the workpiece was less than that of the ring. This did not agree with the pure translation principle and the workpiece surface could not be flat, either. Consequently, it needed to be controlled with the angular velocity of ring and the radii of the ring and the workpiece, besides friction to make the angular velocity of workpiece equal to that of the polishing pad for obtaining fine surface flatness of the workpiece. Copyright © 2007 Inderscience Enterprises Ltd.}

Algorithm of far-field centre estimation based on phase-only matched filter

Estimation of the far-field centre is carried out in beam auto-alignment. In this paper, the features of the far-field of a square beam are presented. Based on these features, a phase-only matched filter is designed, and the algorithm of centre estimation is developed. Using the simulated images with different kinds of noise and the 40 test images that are taken in sequence, the accuracy of this algorithm is estimated. Results show that the error is no more than one pixel for simulated noise images with a 99% probability, and the stability is restricted within one pixel for test images. Using the improved algorithm, the consumed time is reduced to 0.049 s.

Encoded cell grating array in anti-counterfeit technology

The dot matrix hologram (DMH) has been widely used in anti-counterfeiting label. With the same technology and cell array configuration, we can encode to the incidence beam. These codes can be some image matrix grating with different grating gap and different grating orientation. When the multi-level phase diffractive grating is etched, the incidence beam on the cell appears as an encoding image. When the encoded grating and DMH are used in the same label synchronously, the technology of multi-encoded grating array enhances the anti-counterfeit ability.

PIXE and ICP-AES analysis of early glass unearthed from Xinjiang (China)

Early glasses (about 1066 BC-220 AD) unearthed from Xinjiang of China were chemically characterized by using PIXE and ICP-AES. It was found that these glasses were basically attributed to PbO-BaO-SiO2 system, K2O-SiO2 system, Na2O-CaO-SiO2 system and Na2O-CaO-PbO-SiO2 system. The results from the cluster analysis showed that some glasses had basically similar recipe and technology. The PbO-BaO-SiO2 glass and the K2O-SiO2 glass were thought to come from the central area and the south of ancient China, respectively. The part of the Na2O-CaO-SiO2 glass (including the Na2O-CaO-PbO-SiO2 glass) might be imported from Mesopotamia, while the other part might be locally produced. (c) 2005 Elsevier B.V. All rights reserved.

Origin of Chinese ancient glasses;study on the earliest Chinese ancient glasses

The earliest Chinese ancient glasses before the West Han Dynasty (200 BC) from different regions are studied. The glass samples were unearthed from Hunan, Hubei, Yunnan, Sichuan, Guizhou, Guangdong and Xinjiang of China. The chemical composition of these glasses samples is analyzed by proton induced X-ray emission (PIXE) technique, energy dispersive X-ray fluorescence (EDXRF) method and inductively coupled plasma atomic emission spectrometry (ICP-AES). It is shown that the glass chemical compositions belong to barium-lead silicate BaO-PbO-SiO2, potash soda lime silicate K2O (Na2O)-CaO-SiO2 (K2O/Na2O > 1), soda potash lime silicate Na2O (K2O)-CaO-SiO2 (K2O/Na2O < 1) and potash silicate K2O-SiO2 glass systems, respectively. The origins of the earliest Chinese ancient glasses are discussed from the archaeological and historical points of view. These four types of Chinese ancient glasses were all made in Chinese territory using local raw materials. The glass preparation technology was related to the Chinese ancient bronze metallurgy and proto-porcelain glaze technology. The glass technology relationship between the East and the West is analyzed at the same time.

一批中国古代镶嵌玻璃珠化学成分的检测报告

结合外束质子激发X荧光（proton induced X-ray emission,PIXE）和能量色散X射线荧光（energy dispersive X-ray emission,EDXRF）分析技术,对中国新疆、湖北、四川、广东出土的古代镶嵌玻璃珠的化学成分进行了检测.结果表明：新疆拜城克孜尔墓地出土的西周-春秋时期镶嵌玻璃珠为CaO-MgO-SiO2玻璃,战国时期中国境内的PbO-BaO-SiO2和Na2O-CaO-SiO2镶嵌玻璃珠是同时存在的.本文亦对相关问题进行了一些讨论,并提出了部分今后的工

Desenvolvimento e manutenção de memória imunológica após imunização contra Neisseria meningitidis B com a vacina VA-MENGOC-BC

Neisseria meningitidis é uma das principais causas de meningite bacteriana e septicemia em todo o mundo, acometendo principalmente crianças menores de 4 anos. Atualmente, não existe uma vacina universal contra o meningococo B (MenB). A imunidade protetora contra o meningococo caracteriza-se pela presença e persistência de anticorpos bactericidas, porém pouco se sabe sobre os mecanismos de desenvolvimento desta memória sorológica. Avaliamos em modelo animal e em humanos, a geração e manutenção das células secretoras de anticorpos (ASC) e dos linfócitos B de memória (LBm) após vacinação contra MenB. Utilizamos como referência a vacina diftérica (dT ou DTP), considerada ter ótima eficácia em humanos. Para o estudo em modelo animal, grupos de 6 a 8 camundongos suíços, fêmeas, de 5 a 6 semanas, foram imunizados com 3 doses da vacina VA-MENGOC-BC ou DTP, via intramuscular, com intervalo de 2 semanas entre as doses. Aproximadamente 2, 4 ou 6 meses após a última dose, os animais receberam a dose reforço. A vacina anti-MenB induziu uma resposta primária de ASC maior que a resposta à dose reforço. Ao contrário, a resposta de ASC à vacina dT foi maior após o booster. A resposta de LBm anti-MenB permaneceu constante (média de 1%) ao longo de todo o estudo, mas a resposta ao toxóide diftérico (TD) foi maior após o booster (média de 1,9%) que após a imunização primária. A concentração de IgG, anticorpos bactericidas e opsonizantes contra MenB foi dose-dependente e foi reativada após a administração das doses reforços. Esses resultados sugerem que os LBm presentes no baço foram responsáveis pela forte resposta de anticorpos observada após a dose reforço. Para o TD, ambos ASC e LBm foram importantes na manutenção da memória sorológica. Para o estudo em humanos, seis voluntários foram imunizados com 3 doses da vacina VA-MENGOC-BC, via intramuscular, com intervalo de 6 a 7 semanas entre as doses. Seis meses após a imunização primária, os indivíduos receberam uma dose reforço. Outro grupo de voluntários (n = 5) foi imunizado com uma dose reforço da vacina dT. Somente após a terceira dose da vacina anti-MenB foi possível detectar a presença de LBm em todos os indivíduos. Seis meses após a imunização primária, a frequência de LBm voltou ao seu nível basal e não foi reativada após a dose booster. A vacina dT também induziu uma resposta de LBm heterogênea, mas esta foi 5 vezes maior que a induzida por VA-MENGOC-BC. A resposta de anticorpos funcionais anti-MenB foi de curta duração com pequena reativação após a dose reforço. As duas vacinas induziram diferentes frequências de LT de memória central (TCM) e de memória efetora (TEM) após a vacinação primária e após o booster. A resposta à dose booster foi caracterizada pelo aumento da população de linfócitos TCM e diminuição de TEM. A população de linfócitos TCM apresentou maior ativação (CD69+) que os linfócitos TEM, especialmente após a vacinação contra MenB. Concluindo, os dados desta tese indicam que a administração de 3 doses da vacina VA-MENGOC-BC teve uma eficiência limitada em humanos e sugerem que a baixa eficácia da vacina, quando utilizada na década de 90 em São Paulo e no Rio de Janeiro, pode estar relacionada à deficiência na geração e manutenção de LBm específicos.

基于多元统计分析方法对一批中国南方和西南地区的古玻璃成分的研究

采用多元统计方法对四川、重庆、贵州、广西、广东地区出土的100余个古玻璃样品的化学成分数据进行了分析处理。结果表明：中国南方和西南地区的古玻璃制品主要由具有中国特色的铅钡硅酸盐玻璃和钾硅酸盐玻璃组成，可细分为五大系统类别：K2O-CaO（～10wt％）-SiO2系统、K2O-SiO2系统、PbO-BaO-SiO2系统、PbO（～25wt％）-BaO-SiO2系统、CaO-PbO（～40wt％）-BaO—SiO2系统。用因子分析探讨了我国汉代南方和西南地区的玻璃本地生产情况，表明该地区在汉代已经拥有自主生产

中国出土的一批战国古玻璃样品化学成分的检测

对化学成分体系的确定是中国古代玻璃研究中很重要的一个方面，为此，用外束质子激发X荧光技术（PIXE）、电感耦合等离子体原子发射光谱分析（ICP-AES）等方法，对新疆、湖北、河南和重庆等地区出土的一批战国时期的玻璃珠（包含镶嵌玻璃珠）、玻璃璧样品进行了检测。结果表明，战国时期中国境内同时存在PbO-BaO-siO2、K2O-SiO2、Na2O-CaO-SiO2三种硅酸盐玻璃，分布的地域范围从中国的新疆东部一直到长江、黄河流域，以及南方的四川、贵州等地区。中国古代的PbO-BaO-SiO2和K2O-SiO玻

广西合浦地区出土汉代古玻璃的质子激发X荧光分析

采用改进的外束质子激发x射线荧光、电感耦合等离子体原子发射光谱分析等技术，对广西合浦地区出土的一批汉代古玻璃样品的化学成分和结构特性等进行了检测。结果表明：两汉时期，合浦地区的古代玻璃存在K2O—SiO2、PbO-BaO-SiO2、PbO—SiO2、Na2O-K2O-PbO-SiO2、（Na2O）K2O-CaO—SiO2等多种类型，但绝大多数为K2O—SiO2玻璃。表面风化可引起K2O-SiO2玻璃表面K2O等助熔剂的流失和富硅层的形成。综合化学成分以及器型特征，认为我国汉代K2O—SiO2玻璃制造技术可

四川地区出土古玻璃的质子激发X荧光分析

abstract {Proton induced X-ray emission (PIXE) technique is an effective method for the chemical composition analysis of ancient glass samples without destruction. Chemical composition of the ancient glass samples dated from the Warring States Period (770-476 B.C.) to the Six Dynasties Period (220-589 A.D.), which were unearthed in Sichuan area, was quantitatively determined by the PIXE technique. The results show that the glass Bi (disc) and the glass eye beads of the Warring States Period all belong to the PbO-BaO-SiO₂ system. According to the composition and shape, we infer that these glass Bi and eye beads were made in China. Whereas, the chemical compositions of the glass ear pendants and beads of the Six Dynasties Period are varied, including K₂O-CaO-SiO₂, K₂O-SiO₂ and other glass systems. Based on the obtained results and those from literatures, some questions related to the technical propagation of the ancient Chinese glass are discussed.}

Charge and spin transport in graphene devices

170 p.