Mesenchymal stem cells culture on poly(vinylidene fluoride) piezoelectric microspheres

Dissertação de mestrado em Biofísica e Bionanossistemas

Ultradünne molekulare Filme auf Isolatoreinkristalloberflächen : strukturelle und infrarotoptische Eigenschaften

Surfaces, insulators, thin films, low-energy electron diffraction, infrared-spectroscopy, helium atom scattering, quantum chemistry

Direct magnetic resonance arthrography of the wrist with axial traction: A feasibility study to assess joint cartilage.

PURPOSE: To assess the impact of axial traction during acquisition of direct magnetic resonance (MR) arthrography of the wrist with regard to joint space width and amount of contrast material between the opposing cartilage surfaces. MATERIALS AND METHODS: Fifteen consecutive patients (12 male, mean age 38.1 years) were included in this Institutional Review Board-approved prospective study. Three-compartment wrist MR arthrographies were performed between October and December 2009 on a 3 T unit using a fat-suppressed T1-weighted isotropic high-resolution volumetric interpolated breathhold examination (VIBE) sequence in the coronal plane, with and without axial traction (3 kg). Two radiologists measured radiocarpal (radioscaphoid, radiolunate) and midcarpal (lunocapitate, hamatolunate) joint space widths, with and without traction, and assessed the amount of contrast material between the opposing cartilage surfaces using a three-point scale: 0 = absence, 1 = partial, 2 = complete. RESULTS: With traction, joint space width increased significantly at the radioscaphoid (Delta = 0.78 mm, P < 0.01), radiolunate (Delta = 0.18 mm, P < 0.01), and lunocapitate (Delta = 0.45 mm, P < 0.01) spaces, and both observers detected significantly more contrast material between the cartilage surfaces. At the hamatolunate space, the differences in joint space width (Delta = 0.14 mm, P = 0.54) and amount of contrast material were not significant. CONCLUSION: Direct wrist MR arthrography with axial traction of 3 kg increases joint space width at the radiocarpal and lunocapitate spaces, and prompts better coverage of the articular cartilage by the contrast material. J. Magn. Reson. Imaging 2011;. (c) 2011 Wiley-Liss, Inc.

Xoà, literatura i cinema

Aquest treball de final de carrera tracta sobre les diferents perspectives i aproximacions a l'Holocaust nazi per part de la literatura i el cinema. La Xoà, forma que els jueus utilitzen per anomenar l'Holocaust, és un dels moments més importants de la història europea. Ens agradaria veure si aquest tema tan delicat és tractat des de diferents perspectives i aproximacions en la literatura i el cinema. També voldríem esbrinar quina pel·lícula és millor per ensenyar què va ser l'Holocaust a una persona adulta, a un grup d'adolescents, a uns infants, etc. i si hi ha alguna pel·lícula o novel·la que vagi més enllà, en el sentit que tracti l'Holocaust des d'un punt de vista més simbòlic que no pas realista, d'arrel kafkiana, com en el cas de "L'incinerador de cadàvers". Per trobar aquestes diferents perspectives (més realistes i veristes o bé més simbòliques) caldrà observar diversos tipus de literatura (biogràfica, semibiogràfica i de ficció), pel·lícules (bèl·liques, drames, biogràfiques, etc.), articles... Analitzarem al mateix temps què diuen diferents autors sobre l'holocaust com un fet inenarrable. Compararem els dos o tres punts de vista (torturats, torturadors i testimonis).

Generic finite-size enhancement of pairing in mesoscopic Fermi systems

The finite-size-dependent enhancement of pairing in mesoscopic Fermi systems is studied under the assumption that the BCS approach is valid and that the two-body force is size independent. Different systems are investigated such as superconducting metallic grains and films as well as atomic nuclei. It is shown that the finite size enhancement of pairing in these systems is in part due to the presence of a surface which accounts quite well for the data of nuclei and explains a good fraction of the enhancement in Al grains.

Performance Evaluation Of Iowa Bridge Decks Constructed With Epoxy-Coated Reinforcing Bars, RB06-011, 2011

Epoxy coatings have been used on the embedded reinforcing bars of bridge decks since the mid-1970s to mitigate deterioration caused by chloride-induced corrosion. The use of chloride-based deicers became common in the early 1960s and caused corrosion of conventional uncoated bars in bridge decks within 5 to 10 years of commencement of deicer applications. In response to this rapid deterioration, the National Bureau of Standards researched coatings to protect the reinforcement (National Bureau of Standards, 1975), resulting in the development of epoxy-coated reinforcing bars, which were used in bridge decks beginning in 1973. While corrosion-related deterioration has been prevalent on bridge decks with uncoated reinforcing bars in northern climates where the use of deicing salts is common, bridge decks constructed after 1973 with epoxy-coated reinforcing have shown good corrosion resistance with only limited exceptions. On the whole, previous laboratory and field studies regarding the performance of epoxy-coated reinforcing bars are very promising; however, some laboratory and field studies have yielded differing results. In recent years, maintenance personnel for the Iowa Department of Transportation (Iowa DOT) have reportedly performed patch repairs to some bridge decks reinforced with epoxy-coated bars. At one such bridge, the southbound US 65 bridge (Bridge No. 7788.5L065) over the Union Pacific Railroad near Bondurant in Polk County, Iowa, deck repairs were performed by Iowa DOT maintenance personnel in the Spring of 2010, based on our communications regarding this topic with Mr. Gordon Port of the Iowa DOT. These repairs were observed by engineers from the Iowa DOT Office of Bridges and Structures, who reported that significant corrosion was found at a number of epoxy-coated reinforcing bars uncovered during this patch work. These repairs were reportedly performed at spalls and delaminated areas corresponding to cracks over transverse reinforcing bars, and involved careful removal of the concrete from over the bars. Figures 1 through 4 contain photographs provided by Iowa DOT personnel showing the removal process (Figure 1), the conditions encountered (Figures 2 and 3), and close-up views of the corroded reinforcing (Figure 4). As a result of these observations, the Iowa Department of Transportation has requested this study to gain further understanding of the long-term performance of bridge decks reinforced with epoxy-coated bars. The two main objectives of this study are to determine the long-term effectiveness of the epoxy coatings and to determine the potential causes for the deterioration at locations where corrosion has occurred. Wiss, Janney, Elstner Associates, Inc. (WJE) and the Iowa DOT identified eight different bridge decks across Iowa for this study that were constructed using epoxy-coated reinforcing bars. A field investigation consisting of visual inspections, a delamination survey, a concrete cover survey, electrical testing for susceptibility to corrosion, and concrete sampling was conducted within a survey area deemed to be representative of the condition of each bridge deck. Laboratory testing, including chloride ion content testing, characterization of the extracted bars, petrographic examination of the concrete, and carbonation testing, was conducted on the core samples taken from each bridge deck.

Coloquialismo y humor en South Park: análisis del doblaje al español

Este trabajo es un estudio sobre la traducción del coloquialismo y el humor en productos audiovisuales. Tomando como referencia el doblaje al español de South Park, se analizan algunos errores habituales en obras similares y se plantean estrategias de traducción efectivas, tanto a nivel textual como oracional.

Análisis de las incoherencias entre texto e imagen en Los Simpson

En los productos audiovisuales, el canal oral y el visual transmiten información simultáneamente. Si la coherencia de sentido entre texto e imagen desaparece en el doblaje, el objetivo de verosimilitud no se satisface. En este trabajo analizo y clasifico las incoherencias texto-imagen y aporto posibles soluciones a este recurrente problema.

L’envers du miroir: le verlan, une histoire d’ouf!

Des de ja fa uns quants anys existeix un fenomen lingüístic a França que encara avui dia no deixa de sorprendre ni de cridar l'atenció; es tracta d'una parla, o més aviat d’un argot que s’anomena verlan. El verlan, doncs, és un argot que troba el seu origen als barris marginals dels afores de les ciutats (les banlieues), i per la qual cosa s’associa normalment a la classe baixa i marginal d’aquestes. Així, aquest argot es va convertir en un autèntic “art del parlar” del sector juvenil del segle XX, el qual era utilitzat bàsicament per marcar una diferència de classe social i que els seu parlants es poguessin comunicar entre ells sense que ningú altre que no formés part del seu entorn pugui entendre el què deien. El verlan és un argot que es caracteritza per fer una inversió de les paraules, però tot i que sembli inventada, aquesta inversió de fonemes es fa segons unes regles i en funció del nombre de síl•labes del terme. Els mitjans de comunicació van contribuir molt en l’expansió d’aquest argot, però el moviment hip-hop va ser un dels principals mitjans d’expansió, ja que va "vulgaritzar" el verlan i va difondre’l a totes les capes de la societat a partir de les seves peculiars cançons. Així doncs, la pregunta que molts ens plantegem és la de si el verlan és realment una amenaça per al francès estàndard o no.

Drug-eluting stents compared to bare-metal stents improve short-term survival in patients with acute myocardial infarction undergoing primary percutaneous coronary intervention: a nationwide prospective analysis of the AMIS Plus registry.

BACKGROUND: Recently, it has been suggested that the type of stent used in primary percutaneous coronary interventions (pPCI) might impact upon the outcomes of patients with acute myocardial infarction (AMI). Indeed, drug-eluting stents (DES) reduce neointimal hyperplasia compared to bare-metal stents (BMS). Moreover, the later generation DES, due to its biocompatible polymer coatings and stent design, allows for greater deliverability, improved endothelial healing and therefore less restenosis and thrombus generation. However, data on the safety and performance of DES in large cohorts of AMI is still limited. AIM: To compare the early outcome of DES vs. BMS in AMI patients. METHODS: This was a prospective, multicentre analysis containing patients from 64 hospitals in Switzerland with AMI undergoing pPCI between 2005 and 2013. The primary endpoint was in-hospital all-cause death, whereas the secondary endpoint included a composite measure of major adverse cardiac and cerebrovascular events (MACCE) of death, reinfarction, and cerebrovascular event. RESULTS: Of 20,464 patients with a primary diagnosis of AMI and enrolled to the AMIS Plus registry, 15,026 were referred for pPCI and 13,442 received stent implantation. 10,094 patients were implanted with DES and 2,260 with BMS. The overall in-hospital mortality was significantly lower in patients with DES compared to those with BMS implantation (2.6% vs. 7.1%,p < 0.001). The overall in-hospital MACCE after DES was similarly lower compared to BMS (3.5% vs. 7.6%, p < 0.001). After adjusting for all confounding covariables, DES remained an independent predictor for lower in-hospital mortality (OR 0.51,95% CI 0.40-0.67, p < 0.001). Since groups differed as regards to baseline characteristics and pharmacological treatment, we performed a propensity score matching (PSM) to limit potential biases. Even after the PSM, DES implantation remained independently associated with a reduced risk of in-hospital mortality (adjusted OR 0.54, 95% CI 0.39-0.76, p < 0.001). CONCLUSIONS: In unselected patients from a nationwide, real-world cohort, we found DES, compared to BMS, was associated with lower in-hospital mortality and MACCE. The identification of optimal treatment strategies of patients with AMI needs further randomised evaluation; however, our findings suggest a potential benefit with DES.

Pharmaceutical use of galactomannans

The pharmaceutical use of galactomannans from different sources, commercial and noncommercial, has been extensively studied over the past decade. Galactomannans show potential in the global trend towards the use of more plant-based products for ecological motives, and their production and application do not cause pollution or disturb the ecosystem. There is a variety of galactomannan sources and various pharmaceutical forms of application, such as tablets or capsules, hydrogels and films. Besides the simple use as inert excipient this polysaccharides play role in the modification of drug release, especially in colonic environmental, as a matrix or coating material.

MICROESTRUTURA E PROPRIEDADES DE FILMES DE AMIDO-ÁLCOOL POLIVINÍLICO-ALGINATO ADICIONADOS DE ÓLEOS ESSENCIAIS DE COPAÍBA E CAPIM LIMÃO

AbstractFilms obtained by blends between starch and other polymers and films developed with the addition of an oil can show higher water vapor barriers and improved mechanical properties. Films with starch/PVOH/alginate were obtained by adding copaiba and lemongrass essential oils (EOs). Films without oil served as the control. The microstructure, water vapor permeability (PVA), mechanical properties, and antifungal activity were determined for the films. The effects of the addition of the EOs on the properties of the films were dependent of the concentration and type of oil. The films with 0.5% lemongrass EO were similar to the control films. These films showed a 2.02 × 10-12 g s-1Pa m-1 PVA, 11.43 MPa tensile stress, 13.23% elongation, and 247.95 MPa/mm resistance at perforation. The addition of 1% of copaiba EO increased the PVA from 0.5 × 10-12 to 12.1 × 10-12 g s-1 Pa m-1 and the diffusion coefficient from 0.17 × 10-8 to 7.15 × 10-8m2/day. Films with quantities of EOs displayed fissures and micropores; the control films developed micropores with smaller diameters than films with EOs. The addition of EOs did not change the resulting infrared spectrum of the films. The films with oil displayed a diminished development of the Fusarium sp. culture, and the film without EOs did not display notable differences in the development of the culture. The starch/PVOH/alginate films with 0.5% lemongrass EO were the most suited for the development of a packaging active system.

Näyttelijän taide venäläisessä elokuvassa 1907-1919

Väitöskirjan aihe on, kuinka elokuvanäyttelijän taide ja sitä koskeva ajattelu kehittyivät Venäjällä yksityisen elokuvatuotannon vuosina 1907–1919. Tutkimus kuuluu kulttuurihistorian alaan. Sen näkökulma on elokuvan esteettinen historia, ja tutkimus liittyy ns. revisionistisen elokuvahistorian pyrkimykseen arvioida uudelleen näytelmäelokuvan varhaisvaiheita. Analyysi kohdistuu esteettiseen aikalaisajatteluun sekä elokuvatuotannon käytäntöihin ja prosesseihin. Lähteinä on käytetty elokuvanäyttelemistä koskevaa julkista keskustelua, elokuvantekijöiden jättämää muistietoa ja ajalta säilyneitä elokuvia. Käsittely jakautuu kolmeen väljän kronologisesti järjestettyyn lukuun. Luku 2 keskittyy venäläisen fiktioelokuvan varhaisvuosiin 1910-luvun taitteen molemmin puolin. Luku 3 käsittelee pitkän näytelmäelokuvan läpimurrosta alkunsa saanutta keskustelua psykologisesta elokuvasta. Luku 4 etenee maailmansodan vuosina nouseen kuvallisen, ohjaajakeskeisen elokuvakäsityksen kautta kohti varhaisen neuvostoelokuvan ajatusta näyttelijästä ”mallina”. Väitöskirjassa esitetään, että käsitys näyttelemisestä, ja sitä myötä elokuvasta yleensä, kävi tutkittuna ajanjaksona läpi kehämäisen kehityksen, jossa vuorottelivat käsitykset elokuvasta modernina ja elokuvasta traditiona. Tutkimus problematisoi myöhempää elokuvakäsitystä, jonka mukaan elokuvaestetiikan perusyksikkö on otos. Toisin kuin myöhempinä vuosikymmeninä 1910-luvulla näytteleminen oli avainkysymys, jonka kautta lähestyttiin elokuvan olemusta itseään. Venäjällä ajatukset elokuvanäyttelemisestä kehittyivät vuorovaikutuksessa saman ajan teatteriestetiikan kanssa, joskin elokuva miellettiin jo varhain erilliseksi taidemuodoksi. Tsaarinajan elokuvan vaikutusvaltaisimmaksi esteettiseksi ohjelmaksi muodostui psykologinen elokuva, jonka inspiraationa toimi osittain Konstantin Stanislavskin samaan aikaan kehittämä näyttelijäntyön järjestelmä. Elävä näyttelijä ja näyttelijän ”kokeminen” nähtiin ratkaisuna elokuvavälineen keskeisenä ongelmana pidettyyn mekaanisuuteen. Ajan studiokäytännöissä psykologinen lähestymistapa puolestaan merkitsi usein vastausten etsimistä teollisen elokuvatuotannon olosuhteista syntyneisiin ongelmiin.

Paperikoneen kuivatusosan olosuhteiden vaikutus viiranjohtotelojen vaipan materiaalin ja pinnoitteen valintaan korroosiovaurion ehkäisemiseksi

Diplomityön tavoitteena on löytää UPM Kymin paperikone 8:n ensimmäisen kuivatusryhmän johtoteloihin kulumis- ja korroosiokestävämpi materiaali ja pinnoite vallitsevaan olosuhteeseen. Teloihin muodostuu pistemäistä korroosiota ja korroosioalue on paikallinen. Korroosiota syntyy kuivatusviiran alueella, jossa ei ole paperirainaa. Työssä suoritetaan kuivatusosan olosuhdemittauksia ja tutkitaan niiden vaikutuksia korroosion muodostumiseen. Suoritettavat olosuhdemittaukset ovat huuvan ilmatase, paineen 0-taso sekä lämpötilat ja kosteudet eri huuvan osissa. Savukaasumittauksen avulla tutkitaan huuvan ilmankiertoa ensimmäisen kuivatusryhmän viiranjohtotelojen läheisyydessä. Kuivatusviiran ilmanläpäisymittauksen avulla saadaan tietoa viiran ilmanläpäisykyvystä. Hypoteesina viiran tukkeutuminen johtuu pölyävästä kuivaus-prosessista ja kosteudesta. SEM/EDS-alkuainemittauksen avulla pystytään analysoimaan korrosiivisia alkuaineita niin korroosioalueella kuin ympäristössä. Työn tutkimuksen perusteella korroosion muodostuminen aiheutuu tukkeutuneen viiran muodostamasta happipitoisuuseroalueesta. Viiran saostumat sisältävät korrosiivisia kemikaaleja, kuten kloridia, rikkiä ja mangaania. Nämä kiihdyttävät korroosiota happipuutosalueella. Huuvan olosuhdemittauksien perusteella huuvan paineen 0-taso on vino. Savukaasu- ja kosteusmittauksien avulla huomattiin kostean ilman jäävän telojen läheisyyteen. Työssä kehitettiin paineilmapuhdistin viiran reuna-alueen puhdistamiseen. Kaavattaviin telapositioihin valittiin kobolttikromiseostettu volframikarbidipinnoite PTFE -fluoripolymeeritiivistyksellä. Muihin telapositioihin valittiin ETFE –fluori-polymeeripinnoite korroosion ehkäisemiseksi. Pinnoitteiden ja paineilmapuhdistimen avulla telojen käyttöaika nousee nykyisestä kahdesta vuodesta tavoiteltuun 10 vuoteen.

Reality status evaluations in mediated experiences /

This paper explores the cognitive functions of the Reality Status Evaluation (RSE) system in our experiences of narrative mediated messages (NMM) (fictional, narrative, audio-visual one-way input and moving picture messages), such as fictional TV programs and films. We regard reality in mediated experiences as a special mental and emotional construction and a multi-dimensional concept. We argue that viewers' reality sense in NMM is influenced by many factors with "real - on" as the default value. Some of these factors function as primary mental processes, including the content realism factors of those messages such as Factuality (F), Social Realism (SR), Life Relevance (LR), and Perceptual Realism - involvement (PR), which would have direct impacts on reality evaluations. Other factors, such as Narrative Meaning (NM), Emotional Responses, and personality trait Absorption (AB), will influence the reality evaluations directly or through the mediations of these main dimensions. I designed a questionnaire to study this theoretical construction. I developed items to form scales and sub-scales measuring viewers' subjective experiences of reality evaluations and these factors. Pertinent statistical techniques, such as internal consistency and factorial analysis, were employed to make revisions and improve the quality of the questionnaire. In the formal experiment, after viewing two short films, which were selected as high or low narrative structure messages from previous experiments, participants were required to answer the questionnaire, Absorption questionnaire, and SAM (Self-Assessment Manikin, measuring immediate emotional responses). Results were analyzed using the EQS, structural equation modeling (SEM), and discussed in terms oflatent relations among these subjective factors in mediated experience. The present results supported most of my theoretical hypotheses. In NMM, three main jactors, or dimensions, could be extracted in viewers' subjective reality evaluations: Social Realism (combining with Factuality), Life Relevance and Perceptual Realism. I designed two ways to assess viewers' understanding of na"ative meanings in mediated messages, questionnaire (NM-Q) and rating (NM-R) measurement, and its significant influences on reality evaluations was supported in the final EQS models. Particularly in high story stnlcture messages, the effect of Narrative Meaning (NM) can rarely be explained by only these dimensions of reality evaluations. Also, Empathy seems to playa more important role in RSE of low story structure messages. Also, I focused on two other factors that were pertinent to RSE in NMM, the personality trait Absorption, and Emotional Responses (including two dimensions: Valence and Intensity). Final model results partly supported my theoretical hypotheses about the relationships among Absorption (AB), Social Realism (SR) and Life Relevance (LR); and the immediate impact of Emotional Responses on Perceptual Realism cPR).