Potential for broad range multiplexing of fibre Bragg gratings in polymer optical fibres and operation in the 700-nm wavelength range

Refractive index and structural characteristics of optical polymers are strongly influenced by the thermal history of the material. Polymer optical fibres (POF) are drawn under tension, resulting in axial orientation of the polymer molecular chains due to their susceptibility to align in the fibre direction. This change in orientation from the drawing process results in residual strain in the fibre and also affects the transparency and birefringence of the material (1-3). PMMA POF has failure strain as high as over 100%. POF has to be drawn under low tension to achieve this value. The drawing tension affects the magnitude of molecular alignment along the fibre axis, thus affecting the failure strain. The higher the tension the lower the failure stain will be. However, the properties of fibre drawn under high tension can approach that of fibre drawn under low tension by means of an annealing process. Annealing the fibre can generally optimise the performance of POF while keeping most advantages intact. Annealing procedures can reduce index difference throughout the bulk and also reduce residual stress that may cause fracture or distortion. POF can be annealed at temperatures approaching the glass transition temperature (Tg) of the polymer to produce FBG with a permanent blue Bragg wave-length shift at room temperature. At this elevated temperature segmental motion in the structure results in a lower viscosity. The material softens and the molecular chains relax from the axial orientation causing shrinking of the fibre. The large attenuation of typically 1dB/cm in the 1550nm spectral region of PMMA POF has limited FBG lengths to less than 10cm. The more expensive fluorinated polymers with lower absorption have had no success as FBG waveguides. Bragg grating have been inscribed onto various POF in the 800nm spectral region using a 30mW continuous wave 325nm helium cadmium laser, with a much reduced attenuation coefficient of 10dB/m (5). Fabricating multiplexed FBGs in the 800nm spectral region in TOPAS and PMMA POF consistently has lead to fabrication of multiplexed FBG in the 700nm spectral region by a method of prolonged annealing. The Bragg wavelength shift of gratings fabricated in PMMA fibre at 833nm and 867nm was monitored whilst the POF was thermally annealed at 80°C. Permanent shifts exceeding 80nm into the 700nm spectral region was attained by both gratings on the fibre. The large permanent shift creates the possibility of multiplexed Bragg sensors operating over a broad range. -------------------------------------------------------------------------------------------------------------------- 1. Pellerin C, Prud'homme RE, Pézolet M. Effect of thermal history on the molecular orientation in polystyrene/poly (vinyl methyl ether) blends. Polymer. 2003;44(11):3291-7. 2. Dvoránek L, Machová L, Šorm M, Pelzbauer Z, Švantner J, Kubánek V. Effects of drawing conditions on the properties of optical fibers made from polystyrene and poly (methyl methacrylate). Die Angewandte Makromolekulare Chemie. 1990;174(1):25-39. 3. Dugas J, Pierrejean I, Farenc J, Peichot JP. Birefringence and internal stress in polystyrene optical fibers. Applied optics. 1994;33(16):3545-8. 4. Jiang C, Kuzyk MG, Ding JL, Johns WE, Welker DJ. Fabrication and mechanical behavior of dye-doped polymer optical fiber. Journal of applied physics. 2002;92(1):4-12. 5. Johnson IP, Webb DJ, Kalli K, Yuan W, Stefani A, Nielsen K, et al., editors. Polymer PCF Bragg grating sensors based on poly (methyl methacrylate) and TOPAS cyclic olefin copolymer2011: SPIE.

Humidity insensitive TOPAS polymer fiber Bragg grating sensor

We report the first experimental demonstration of a humidity insensitive polymer optical fiber Bragg grating (FBG), as well as the first FBG recorded in a TOPAS polymer optical fiber in the important low loss 850nm spectral region. For the demonstration we have fabricated FBGs with resonance wavelength around 850 nm and 1550 nm in single-mode microstructured polymer optical fibers made of TOPAS and the conventional poly (methyl methacrylate) (PMMA). Characterization of the FBGs shows that the TOPAS FBG is more than 50 times less sensitive to humidity than the conventional PMMA FBG in both wavelength regimes. This makes the TOPAS FBG very appealing for sensing applications as it appears to solve the humidity sensitivity problem suffered by the PMMA FBG. © 2011 Optical Society of America.

Potential for broad range multiplexing of fibre Bragg gratings in polymer optical fibres and operation in the 700-nm wavelength range

Refractive index and structural characteristics of optical polymers are strongly influenced by the thermal history of the material. Polymer optical fibres (POF) are drawn under tension, resulting in axial orientation of the polymer molecular chains due to their susceptibility to align in the fibre direction. This change in orientation from the drawing process results in residual strain in the fibre and also affects the transparency and birefringence of the material (1-3). PMMA POF has failure strain as high as over 100%. POF has to be drawn under low tension to achieve this value. The drawing tension affects the magnitude of molecular alignment along the fibre axis, thus affecting the failure strain. The higher the tension the lower the failure stain will be. However, the properties of fibre drawn under high tension can approach that of fibre drawn under low tension by means of an annealing process. Annealing the fibre can generally optimise the performance of POF while keeping most advantages intact. Annealing procedures can reduce index difference throughout the bulk and also reduce residual stress that may cause fracture or distortion. POF can be annealed at temperatures approaching the glass transition temperature (Tg) of the polymer to produce FBG with a permanent blue Bragg wave-length shift at room temperature. At this elevated temperature segmental motion in the structure results in a lower viscosity. The material softens and the molecular chains relax from the axial orientation causing shrinking of the fibre. The large attenuation of typically 1dB/cm in the 1550nm spectral region of PMMA POF has limited FBG lengths to less than 10cm. The more expensive fluorinated polymers with lower absorption have had no success as FBG waveguides. Bragg grating have been inscribed onto various POF in the 800nm spectral region using a 30mW continuous wave 325nm helium cadmium laser, with a much reduced attenuation coefficient of 10dB/m (5). Fabricating multiplexed FBGs in the 800nm spectral region in TOPAS and PMMA POF consistently has lead to fabrication of multiplexed FBG in the 700nm spectral region by a method of prolonged annealing. The Bragg wavelength shift of gratings fabricated in PMMA fibre at 833nm and 867nm was monitored whilst the POF was thermally annealed at 80°C. Permanent shifts exceeding 80nm into the 700nm spectral region was attained by both gratings on the fibre. The large permanent shift creates the possibility of multiplexed Bragg sensors operating over a broad range. -------------------------------------------------------------------------------------------------------------------- 1. Pellerin C, Prud'homme RE, Pézolet M. Effect of thermal history on the molecular orientation in polystyrene/poly (vinyl methyl ether) blends. Polymer. 2003;44(11):3291-7. 2. Dvoránek L, Machová L, Šorm M, Pelzbauer Z, Švantner J, Kubánek V. Effects of drawing conditions on the properties of optical fibers made from polystyrene and poly (methyl methacrylate). Die Angewandte Makromolekulare Chemie. 1990;174(1):25-39. 3. Dugas J, Pierrejean I, Farenc J, Peichot JP. Birefringence and internal stress in polystyrene optical fibers. Applied optics. 1994;33(16):3545-8. 4. Jiang C, Kuzyk MG, Ding JL, Johns WE, Welker DJ. Fabrication and mechanical behavior of dye-doped polymer optical fiber. Journal of applied physics. 2002;92(1):4-12. 5. Johnson IP, Webb DJ, Kalli K, Yuan W, Stefani A, Nielsen K, et al., editors. Polymer PCF Bragg grating sensors based on poly (methyl methacrylate) and TOPAS cyclic olefin copolymer2011: SPIE.

Humidity insensitive TOPAS polymer fiber Bragg grating sensor

We report the first experimental demonstration of a humidity insensitive polymer optical fiber Bragg grating (FBG), as well as the first FBG recorded in a TOPAS polymer optical fiber in the important low loss 850nm spectral region. For the demonstration we have fabricated FBGs with resonance wavelength around 850 nm and 1550 nm in single-mode microstructured polymer optical fibers made of TOPAS and the conventional poly (methyl methacrylate) (PMMA). Characterization of the FBGs shows that the TOPAS FBG is more than 50 times less sensitive to humidity than the conventional PMMA FBG in both wavelength regimes. This makes the TOPAS FBG very appealing for sensing applications as it appears to solve the humidity sensitivity problem suffered by the PMMA FBG. © 2011 Optical Society of America.

Humidity sensitivity of topas optical fibre bragg grating

Fibre Bragg gratings at 1568nm have been inscribed in single mode TOPAS microstructured polymer optical fibre to characterise thermal and humidity sensitivity of the fibres in the 1550nm spectral region. Results demonstrate a temperature sensitivity of approximately -36 pm/°C and a humidity sensitivity of no more than - 0.59 pm/%RH. The fibre material appears to be very attractive for long term monitoring of high strains because of its insensitivity to humidity.

On a first-name basis: Englishization and naming in Flanders

Following and contributing to the ongoing shift from more structuralist, system-oriented to more pragmatic, socio-cultural oriented anglicism research, this paper verifies to what extent the global spread of English affects naming patterns in Flanders. To this end, a diachronic database of first names is constructed, containing the top 75 most popular boy and girl names from 2005 until 2014. In a first step, the etymological background of these names is documented and the evolution in popularity of the English names in the database is tracked. Results reveal no notable surge in the preference for English names. This paper complements these database-driven results with an experimental study, aiming to show how associations through referents are in this case more telling than associations through phonological form (here based on etymology). Focusing on the socio-cultural background of first names in general and of Anglo-American pop culture in particular, the second part of the study specifically reports on results from a survey where participants are asked to name the first three celebrities that leap to mind when hearing a certain first name (e.g. Lana, triggering the response Del Rey). Very clear associations are found between certain first names and specific celebrities from Anglo-American pop culture. Linking back to marketing research and the social turn in onomastics, we will discuss how these celebrities might function as referees, and how social stereotypes surrounding these referees are metonymically attached to their first names. Similar to the country-of-origin-effect in marketing, these metonymical links could very well be the reason why parents select specific “celebrity names”. Although further attitudinal research is needed, this paper supports the importance of including socio-cultural parameters when conducting onomastic research.

Il Libro del cibo gustoso e salutare: una bibbia culinaria per l'Unione Sovietica

L'obbiettivo del presente elaborato è quello di delineare la genesi del Libro del cibo gustoso e salutare (Kniga o vkusnoj i zdorovoj pišče), dai più considerato la "bibbia culinaria" dell'Unione Sovietica. Il lavoro è diviso in tre capitoli. Nel primo viene delineato il contesto politico-culturale degli anni antecedenti l’uscita del libro. Il secondo capitolo costituisce il cuore dell’elaborato ed è incentrato sulla descrizione del progetto del Commissario del popolo per l’industria alimentare Anastas Mikojan e della sua importanza, seguita dall’analisi delle due più importanti edizioni del Libro del cibo gustoso e salutare, la prima, del 1939, e quella del 1952. Infine, il terzo capitolo tratta della lettura in chiave social realista del Libro e delle reazioni che suscitò nei cittadini sovietici dell’epoca.

Dermoscopic variability of basal cell carcinoma according to clinical type and anatomic location

Background Correctly diagnosing basal cell carcinoma (BCC) clinical type is crucial for the therapeutic management. A systematic description of the variability of all reported BCC dermoscopic features according to clinical type and anatomic location is lacking. Objectives To describe the dermoscopic variability of BCC according to clinical type and anatomic location and to test the hypothesis of a clinical/dermoscopic continuum across superficial BCCs (sBCCs) with increasing palpability. Methods Clinical/dermoscopic images of nodular BCCs (nBCCs) and sBCCs with different degrees of palpability were retrospectively evaluated for the presence of dermoscopic criteria including degree of pigmentation, BCC-associated patterns, diverse vascular patterns, melanocytic patterns and polarized light patterns. Results We examined 501 histopathologically proven BCCs (66.9% sBCCs; 33.1% nBCCs), mainly located on trunk (46.7%; mostly sBCCs) and face (30.5%; mostly nBCCs). Short fine telangiectasias, leaf-like areas, spoke-wheel areas, small erosions and concentric structures were significantly associated with sBCC, whereas arborizing telangiectasias, blue-white veil-like structures, white shiny areas and rainbow pattern with nBCCs. Short fine telangiectasia, spoke-wheel areas and small erosions were independently associated with trunk location, whereas arborizing telangiectasias with facial location. Scalp BCCs had significantly more pigmentation and melanocytic criteria than BCCs located elsewhere. Multiple clinical/dermoscopic parameters displayed a significant linear trend across increasingly palpable sBCCs. Conclusions Particular dermoscopic criteria are independently associated with clinical type and anatomic location of BCC. Heavily pigmented, scalp BCCs are the most challenging to diagnose. A clinical/dermoscopic continuum across increasingly palpable sBCCs was detected and could be potentially important for the non-surgical management of the disease.

Antileishmanial activity of the essential oil from Tetradenia riparia obtained in different seasons

The herbaceous shrub Tetradenia riparia has been traditionally used to treat inflammatory and infectious diseases. Recently, a study showed that T. riparia essential oil (TrEO) obtained in summer has antileishmanial effects, although these results could be influenced by seasonal variation. This study evaluated the activity of the TrEO obtained in different seasons against Leishmania (Leishmania) amazonensis , in vitro and in vivo. The compounds in the TrEO were analysed by gas chromatography-mass spectrometry; terpenoids were present and oxygenated sesquiterpenes were the majority compounds (55.28%). The cytotoxicity and nitric oxide (NO) production were also tested after TrEO treatment. The TrEO from all seasons showed a 50% growth inhibitory concentration for promastigotes of about 15 ng/mL; at 30 ng/mL and 3 ng/mL, the TrEO reduced intracellular amastigote infection, independently of season. The TrEO from plants harvested in summer had the highest 50% cytotoxic concentration, 1,476 ng/mL for J774.A1 macrophages, and in spring (90.94 ng/mL) for murine macrophages. NO production did not change in samples of the TrEO from different seasons. The antileishmanial effect in vivo consisted of a reduction of the parasite load in the spleen. These results suggest that the TrEO has potential effects on L. (L.) amazonensis, consonant with its traditional use to treat parasitic diseases.

Estratégias de sucessão trigo/aveia preta-soja para sistemas de produção de grãos no Noroeste do Rio Grande do Sul.

2016

Estratégias de sucessão trigo/aveia preta-soja para sistemas de produção de grãos no Planalto Médio do Rio Grande do Sul.

2016

Estratégias de sucessão trigo/cevada/aveia preta/soja para sistemas de produção de grãos no Centro-Sul do Paraná.

2016