Voting: Fact sheet, August 11, 2014

Information for voting. Every citizen has the right to vote. Absentee voting information

The use of electronic voting systems to enhance deep learning.

The present paper introduces a technology-enhanced teaching method that promotes deep learning. Four stages that correspond to four different student cohorts were used for its development and to analyse its effectiveness. The effectiveness of the method has been assessed in terms of examination results as well as results obtained from class response system software statistics. The evidence gathered indicates that the method developed is very effective and its implementation is straightforward. Furthermore, its success in achieving results seems to be independent of the skills and/or experience of the lecturer.

The use of e-voting as a new tool of e-participation in modern democracies

Finding the answer to the question of the role of electronic voting in a modern country consti - tutes an important part of researches into electronic democracy. The recent dynamic development of in - formation and communication technologies (ICT) and mass media have been leading to noticeable changes in functioning of contemporary countries and societies. ICT is beginning to play a greater and greater role and filter down to almost every field of contemporary human life – including politics. Elec - tronic voting represents one of the more and more popular forms of so called e-democracy, and is an in - teresting research subject in the context of mechanisms for implementing this form of participation in elections, its legitimization, specific technological solutions for e-voting and their effectiveness as well as unintended consequences. The main subject of this text is the use of electronic voting ( e-voting )asone of the forms of electronic democracy . The article attempts to answer the following research questions: First, what is the impact of ICT on the political processes – particularly on the voting procedures? Sec- ondly, what is the essence of electronic voting and what are its main features? Finally, what are the e-voting experiences in the European countries? The text is devoted rather to general remarks on e-voting, and does not constitute a complete analysis of the issue. It is intended to be a contribution to the further considerations.

Voting in Iowa by George B. Mather: with illustrations by Dale Ballantyne, February 1956

This booklet contains information on citizenship and voting in elections in Iowa. It provides a simple means of answering questions asked of election officials. Written by George B. Mather, with illustrations by Dale Ballantyne,

ABSENTEE VOTING In South Carolina

This paper covers the topics: reasons to vote absentee, absentee voting at the county voter registration office, absentee voting by mail and military and overseas citizens

VOTING In South Carolina

This paper explains the voting process including: voting at the polling place, voting absentee, provisional ballots, photo ID requirements, curbside voting, assistance with voting, lost voter registration card and voters without photo ID.

1-2-3 VOTE : How To Use South Carolina’s Voting System

This paper describes, with pictures, how to use voting machines and how to cast your vote.

Civil conflict and voting behavior : evidence from Colombia

¿Cuáles son los efectos de la guerra sobre el comportamiento político? Colombia es un caso interesante en el que el conflicto y las elecciones coexisten y los grupos armados ilegales intencionalmente afectan los resultados electorales. Sin embargo, los grupos usan diferentes estrategias para alterar estos resultados. Este artículo argumenta que los efectos diferenciales de la violencia sobre los resultados electorales son el resultado de estrategias deliberadas de los grupos ilegales, que a su turno, son consecuencia de las condiciones militares que difieren entre ellos. Usando datos panel de las elecciones al Senado de 1994 a 2006 y una aproximación por variables instrumentales para resolver posibles problemas de endogenidad, este artículo muestra que la violencia guerrillera disminuye la participación electoral, mientras que la violencia paramilitar no tiene ningún efecto sobre la participación pero reduce la competencia electoral y beneficia a nuevos partidos no-tradicionales. Esto es consistente con la hipótesis de que la estrategia de la guerrilla es sabotear las elecciones, mientras que los paramiltares establecen alianzas con ciertos candidatos.

Skill development for innovative procurement environments in construction

The construction industry should be a priority to all governments because it impacts economically and socially on all citizens. Sector turnover in industrialised economies typically averages 8-12% of GDP. Further, construction is critical to economic growth. Recent Australian studies estimate that a 10% gain in efficiency in construction translates to a 2.5% increase in GDP Inefficiencies in the Australian construction industry have been identified by a number of recent studies modelling the building process. They have identified potential savings in time of between 25% and 40% by reducing non-value added steps in the process. A culture of reform is now emerging in the industry – one in which alternate forms of project delivery are being trialed. Government and industry have identified Alliance Contracting as a means to increase efficiency in the construction industry as part of a new innovative procurement environment. Alliance contracting requires parties to form relationships and work cooperatively to provide a more complete service. This is a significant cultural change for the construction industry, with its well-known adversarial record in traditional contracting. Alliance contracts offer enormous potential benefits, but the Australian construction industry needs to develop new skills to effectively participate in the new relationship environment. This paper describes a collaborative project identifying skill needs for clients and construction professionals to more effectively participate in an increasingly sophisticated international procurement environment. The aim of identifying these skill needs is to assist industry, government, and skill developers to prepare the Australian construction workforce for the future. The collaborating Australian team has been fortunate to secure the Australian National Museum in Canberra as its live case study. The Acton Peninsula Development is the first major building development in the world awarded on the basis of a joint alliance contract.

SCOOT CBN

SCOOT is a hybrid event combining the web, mobile devices, public displays and cultural artifacts across multiple public parks and museums in an effort to increase the perceived and actual access to cultural participation by everyday people. The research field is locative game design and the context was the re-invigoration of public sites as a means for exposing the underlying histories of sites and events. The key question was how to use game play technologies and processes within everyday places in ways that best promote playful and culturally meaningful experiences whilst shifting the loci of control away from commercial and governmental powers. The research methodology was primarily practice led underpinned by ethnographic and action research methods. In 2004 SCOOT established itself as a national leader in the field by demonstrating innovative methods for stimulating rich interactions across diverse urban places using technically-augmented game play. Despite creating a sophisticated range of software and communication tools SCOOT most dramatically highlighted the role of the ubiquitous mobile phone in facilitating socially beneficial experiences. Through working closely with the SCOOT team, collaborating organisations developed important new knowledge around the potential of new technologies and processes for motivating, sustaining and reinvigorating public engagement. Since 2004, SCOOT has been awarded $600,00 in competitive and community funding as well as countless in kind support from partner organisations such as Arts Victoria, National Gallery of Victoria, Melbourne Museum, Australian Centre for the Moving Image, Federation Square, Art Centre of Victoria, The State Library of Victoria, Brisbane River Festival, State Library of Queensland, Brisbane Maritime Museum, Queensland University of Technology, and Victoria University.

Power network in the loop : subsystem testing using a switching amplifier

“Hardware in the Loop” (HIL) testing is widely used in the automotive industry. The sophisticated electronic control units used for vehicle control are usually tested and evaluated using HIL-simulations. The HIL increases the degree of realistic testing of any system. Moreover, it helps in designing the structure and control of the system under test so that it works effectively in the situations that will be encountered in the system. Due to the size and the complexity of interaction within a power network, most research is based on pure simulation. To validate the performance of physical generator or protection system, most testing is constrained to very simple power network. This research, however, examines a method to test power system hardware within a complex virtual environment using the concept of the HIL. The HIL testing for electronic control units and power systems protection device can be easily performed at signal level. But performance of power systems equipments, such as distributed generation systems can not be evaluated at signal level using HIL testing. The HIL testing for power systems equipments is termed here as ‘Power Network in the Loop’ (PNIL). PNIL testing can only be performed at power level and requires a power amplifier that can amplify the simulation signal to the power level. A power network is divided in two parts. One part represents the Power Network Under Test (PNUT) and the other part represents the rest of the complex network. The complex network is simulated in real time simulator (RTS) while the PNUT is connected to the Voltage Source Converter (VSC) based power amplifier. Two way interaction between the simulator and amplifier is performed using analog to digital (A/D) and digital to analog (D/A) converters. The power amplifier amplifies the current or voltage signal of simulator to the power level and establishes the power level interaction between RTS and PNUT. In the first part of this thesis, design and control of a VSC based power amplifier that can amplify a broadband voltage signal is presented. A new Hybrid Discontinuous Control method is proposed for the amplifier. This amplifier can be used for several power systems applications. In the first part of the thesis, use of this amplifier in DSTATCOM and UPS applications are presented. In the later part of this thesis the solution of network in the loop testing with the help of this amplifier is reported. The experimental setup for PNIL testing is built in the laboratory of Queensland University of Technology and the feasibility of PNIL testing has been evaluated using the experimental studies. In the last section of this thesis a universal load with power regenerative capability is designed. This universal load is used to test the DG system using PNIL concepts. This thesis is composed of published/submitted papers that form the chapters in this dissertation. Each paper has been published or submitted during the period of candidature. Chapter 1 integrates all the papers to provide a coherent view of wide bandwidth switching amplifier and its used in different power systems applications specially for the solution of power systems testing using PNIL.

Scott A. Shane : winner of the Global Award for Entrepreneurship Research

Scott A. Shane is the 2009 winner of the Global Award for Entrepreneurship Research. In this article we discuss and analyze Shane’s most important contributions to the field of entrepreneurship. His contribution is extraordinarily broad in scope, which makes it difficult to pinpoint one or a few specifics that we associate with Shane’s scholarship. Instead, they can be summarized in the following three points. First, he has influenced what we view as central aspects of entrepreneurship. Shane has been a leading figure in redirecting the focus on entrepreneurship research itself. Second, he has influenced how we view entrepreneurship. Shane’s research is arguably theory driven and it applies and develops theoretical lenses that greatly improve our understanding of entrepreneurship. Third, he has contributed to how we conduct entrepreneurship research. Shane has been a forerunner in examining relevant units of analysis that are difficult to sample; research designs and databases specifically designed for studying entrepreneurial processes; and sophisticated analytical methods. This has contributed to advancing the methodological rigor of the field. Summing them up, the contributions are very impressive indeed.

Improving the management of building life cycle : a data mining approach

The construction industry has adapted information technology in its processes in terms of computer aided design and drafting, construction documentation and maintenance. The data generated within the construction industry has become increasingly overwhelming. Data mining is a sophisticated data search capability that uses classification algorithms to discover patterns and correlations within a large volume of data. This paper presents the selection and application of data mining techniques on maintenance data of buildings. The results of applying such techniques and potential benefits of utilising their results to identify useful patterns of knowledge and correlations to support decision making of improving the management of building life cycle are presented and discussed.

Literature Review Value Alignment Process for Project Delivery

The objective of the project “Value Alignment Process for Project Delivery” is to provide a catalyst and tools for reform in the building and construction industry to transform business-as-usual performance into exceptional performance. The outcomes of this project will be beneficial to not only the construction industry, but to the community as a whole because a more sophisticated industry can deliver more effective use of assets, financing, operating and maintenance of facilities to suit the community’s needs. The research project consists of a study into best practice project delivery and the development of a suite of products, resources and services to guide project teams towards the best approach for a specific project. These resources will be focused on promoting the principles that underlie best practice project delivery, rather than on identifying a particular delivery system. The need for such tools and resources becomes more and more acute as the environment within which the construction industry operates becomes more and more complex, and as business and political imperatives shift to encompass or represent diverse stakeholder interests. To this end, this literature review looks at why it is essential to achieve transformation in the Australian construction industry in the context of its importance to the Australian economy. It seeks to investigate the concepts of ‘alignment’ and value’ as they pertain to construction industry processes and relationships. It comprehensively reviews drivers of project excellence and best practice project delivery principles and looks at how clients approach selection of project delivery systems. It critiques existing project delivery strategies and gives an overview of recent best practice initiatives. The literature review represents a milestone against the Project Agreement and forms a foundation document for this research project

Final Report

This project aims to assess the extent of economic sustainability of working in international markets by Australian construction design-related firms. This investigation also identified barriers and success factors firms experience, which ultimately increases or reduces their exposure to financial risk. This study explored new research territory by developing a detailed understanding of the way three successful firms have maintained their longevity in various international markets. The firms are not considered to be large firms by international standards. The manner in which the firms achieve long term sustainability, deal with problems and barriers in international markets and develop successful strategies rely upon being adaptable to different markets and changes within markets. A model was developed based upon a critical analysis of the literature. An adaptive performance framework for sustainability was developed which had three key areas; internationalisation process, market knowledge and design management. The sustainable business model is underpinned by the management of non-economic factors, which include social, cultural and intellectual capital. The ultimate aim of any firm and the ultimate indicator of success is financial capital. Firms typically develop their own highly sophisticated financial measures themselves however have only an implicit understanding of other softer and less tangible factors that impact upon sustainability. Adaptive performance is the firm’s continual adaptivity of business practices to respond to and thereby achieve client satisfaction by a combination of self, market and project needs assessment.