Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer

Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models (CZM) have been used for the strength prediction of adhesive joints, as an add-in to Finite Element (FE) analyses that allows simulation of damage growth, by consideration of energetic principles. A useful feature of CZM is that different shapes can be developed for the cohesive laws, depending on the nature of the material or interface to be simulated, allowing an accurate strength prediction. This work studies the influence of the CZM shape (triangular, exponential or trapezoidal) used to model a thin adhesive layer in single-lap adhesive joints, for an estimation of its influence on the strength prediction under different material conditions. By performing this study, guidelines are provided on the possibility to use a CZM shape that may not be the most suited for a particular adhesive, but that may be more straightforward to use/implement and have less convergence problems (e.g. triangular shaped CZM), thus attaining the solution faster. The overall results showed that joints bonded with ductile adhesives are highly influenced by the CZM shape, and that the trapezoidal shape fits best the experimental data. Moreover, the smaller is the overlap length (LO), the greater is the influence of the CZM shape. On the other hand, the influence of the CZM shape can be neglected when using brittle adhesives, without compromising too much the accuracy of the strength predictions.

Position paper on time and event-triggered communication services in the context of e-manufacturing

Modern factories are complex systems where advances in networking and information technologies are opening new ways towards higher efficiency. Such move is being driven by market rules with ever-increasing competition levels, in search for faster time-to-market, improved process yield, non-stop operations, flexible manufacturing and tighter supply-chain coupling. All these aims present a common requirement, i.e. a realtime flow of information, from the plant-floor up to the management, maintenance, suppliers and clients, to support accurate monitoring and control of the factory. This stresses the importance achieved by the communication infrastructure in modern manufacturing industry. This paper presents the authors view concerning the current trends in modern factory communication systems. It addresses the problems of seamlessly integrating different information flows with diverse requirements, mainly in terms of timeliness. In this aspect, the debate between event-triggered and time-triggered communication is revisited as well as the joint support for both types of traffic. Finally, a view of where factory communication systems are moving to is also presented, showing the impact of open and widely available technologies.

A one-dimensional prescribed curvature equation modeling the corneal shape

We prove existence, uniqueness, and stability of solutions of the prescribed curvature problem (u'/root 1 + u'(2))' = au - b/root 1 + u'(2) in [0, 1], u'(0) = u(1) = 0, for any given a > 0 and b > 0. We also develop a linear monotone iterative scheme for approximating the solution. This equation has been proposed as a model of the corneal shape in the recent paper (Okrasinski and Plociniczak in Nonlinear Anal., Real World Appl. 13:1498-1505, 2012), where a simplified version obtained by partial linearization has been investigated.

Democratic dialogue and collective learning in the context of self-managed teams

This paper provides a longitudinal, empirical view of the multifaceted and reciprocal processes of organizational learning in a context of self-managed teams. Organizational learning is seen as a social construction between people and actions in a work setting. The notion of learning as situated (Brown & Duguid 1989, Lave& Wenger 1991, Gherardi & al. 1998, Easterby-Smith & Araujo 1999, Abma 2003) opens up the possibility for placing the focus of research on learning in the community rather than in individual learning processes. Further, in studying processes in their social context, we cannot avoid taking power relations into consideration (Contu & Willmott 2003). The study is based on an action research with a methodology close to the ‘democratic dialogue’ presented by Gustavsen (2001). This gives a ground for research into how the learning discourse developed in the case study organization over a period of 5 years, during which time the company abandoned a middle management level of hierarchy and the teams had to figure out how to work as self-managed units. This paper discusses the (re)construction of power relations and its role in organizational learning. Power relations are discussed both in vertical and horizontal work relations. A special emphasis is placed on the dialectic between managerial aims and the space for reflection on the side of employees. I argue that learning is crucial in the search for the limits for empowerment and that these limits are negotiated both in actions and speech. This study unfolds a purpose-oriented learning process, constructing an open dialogue, and describes a favourable context for creative, knowledge building communities.

In-situ X-ray diffraction studies during growth of Ni-Ti shape memory alloy films and their complementary ex-situ characterization

Shape Memory Alloy (SMA) Ni-Ti films have attracted much interest as functional and smart materials due to their unique properties. However, there are still important issues unresolved like formation of film texture and its control as well as substrate effects. Thus, the main challenge is not only the control of the microstructure, including stoichiometry and precipitates, but also the identification and control of the preferential orientation since it is a crucial factor in determining the shape memory behaviour. The aim of this PhD thesis is to study the optimisation of the deposition conditions of films of Ni-Ti in order to obtain the material fully crystallized at the end of the deposition, and to establish a clear relationship between the substrates and texture development. In order to achieve this objective, a two-magnetron sputter deposition chamber has been used allowing to heat and to apply a bias voltage to the substrate. It can be mounted into the six-circle diffractometer of the Rossendorf Beamline (ROBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France, enabling an in-situ characterization by X-ray diffraction(XRD) of the films during their growth and annealing. The in-situ studies enable us to identify the different steps of the structural evolution during deposition with a set of parameters as well as to evaluate the effect of changing parameters on the structural characteristics of the deposited film. Besides the in-situ studies, other complementary ex-situ characterization techniques such as XRD at a laboratory source, Rutherford backscattering spectroscopy(RBS), Auger electron spectroscopy (AES), cross-sectional transmission electron microscopy (X-TEM), scanning electron microscopy (SEM), and electrical resistivity (ER) measurements during temperature cycling have been used for a fine structural characterization. In this study, mainly naturally and thermally oxidized Si(100) substrates, TiN buffer layers with different thicknesses (i.e. the TiN topmost layer crystallographic orientation is thickness dependent) and MgO(100) single crystals were used as substrates. The chosen experimental procedure led to a controlled composition and preferential orientation of the films. The type of substrate plays an important role for the texture of the sputtered Ni-Ti films and according to the ER results, the distinct crystallographic orientations of the Ni-Ti films influence their phase transformation characteristics.

Spatial distribution and socioeconomic context of tuberculosis in Rio de Janeiro, Brazil

OBJECTIVE To analyze the spatial distribution of risk for tuberculosis and its socioeconomic determinants in the city of Rio de Janeiro, Brazil.METHODS An ecological study on the association between the mean incidence rate of tuberculosis from 2004 to 2006 and socioeconomic indicators of the Censo Demográfico (Demographic Census) of 2000. The unit of analysis was the home district registered in the Sistema de Informação de Agravos de Notificação (Notifiable Diseases Information System) of Rio de Janeiro, Southeastern Brazil. The rates were standardized by sex and age group, and smoothed by the empirical Bayes method. Spatial autocorrelation was evaluated by Moran’s I. Multiple linear regression models were studied and the appropriateness of incorporating the spatial component in modeling was evaluated.RESULTS We observed a higher risk of the disease in some neighborhoods of the port and north regions, as well as a high incidence in the slums of Rocinha and Vidigal, in the south region, and Cidade de Deus, in the west. The final model identified a positive association for the variables: percentage of permanent private households in which the head of the house earns three to five minimum wages; percentage of individual residents in the neighborhood; and percentage of people living in homes with more than two people per bedroom.CONCLUSIONS The spatial analysis identified areas of risk of tuberculosis incidence in the neighborhoods of the city of Rio de Janeiro and also found spatial dependence for the incidence of tuberculosis and some socioeconomic variables. However, the inclusion of the space component in the final model was not required during the modeling process.

A one-dimensional prescribed curvature equation modeling the corneal shape.

We prove existence, uniqueness, and stability of solutions of the prescribed curvature problem (u'/root 1 + u'(2))' = au - b/root 1 + u'(2) in [0, 1], u'(0) = u(1) = 0, for any given a > 0 and b > 0. We also develop a linear monotone iterative scheme for approximating the solution. This equation has been proposed as a model of the corneal shape in the recent paper (Okrasinski and Plociniczak in Nonlinear Anal., Real World Appl. 13:1498-1505, 2012), where a simplified version obtained by partial linearization has been investigated.

Exposure to psychosocial risk factors in the context of work: a systematic review

ABSTRACT OBJECTIVE To analyze the scientific literature about the effects of exposure to psychosocial risk factors in work contexts. METHODS A systematic review was performed using the terms “psychosocial factors” AND “COPSOQ” in the databases PubMed, Medline, and Scopus. The period analyzed was from January 1, 2004 to June 30, 2012. We have included articles that used the Copenhagen Psychosocial Questionnaire (COPSOQ) as a measuring instrument of the psychosocial factors and the presentation of quantitative or qualitative results. German articles, psychometric studies or studies that did not analyze individual or work factors were excluded. RESULTS We included 22 articles in the analysis. Individual factors, such as gender, age, and socioeconomic status, were analyzed along with work-related factors such as labor demands, work organization and content, social relationships and leadership, work-individual interface, workplace values, justice and respect, personality, health and well-being, and offensive behaviors. We analyzed the sample type and the applied experimental designs. Some population groups, such as young people and migrants, are more vulnerable. The deteriorated working psychosocial environment is associated with physical health indicators and weak mental health. This environment is also a risk factor for the development of moderate to severe clinical conditions, predicting absenteeism or intention of leaving the job. CONCLUSIONS The literature shows the contribution of exposure to psychosocial risk factors in work environments and their impact on mental health and well-being of workers. It allows the design of practical interventions in the work context to be based on scientific evidences. Investigations in specific populations, such as industry, and studies with more robust designs are lacking.

Context-aware multi-factor authentication

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática

Including context in a routing algorithm for the internet of things

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Informática

Consistency and Context Management in a Multi Agent Belief Revision Testbed

Multi-agent architectures are well suited for complex inherently distributed problem solving domains. From the many challenging aspects that arise within this framework, a crucial one emerges: how to incorporate dynamic and conflicting agent beliefs? While the belief revision activity in a single agent scenario is concentrated on incorporating new information while preserving consistency, in a multi-agent system it also has to deal with possible conflicts between the agents perspectives. To provide an adequate framework, each agent, built as a combination of an assumption based belief revision system and a cooperation layer, was enriched with additional features: a distributed search control mechanism allowing dynamic context management, and a set of different distributed consistency methodologies. As a result, a Distributed Belief Revision Testbed (DiBeRT) was developed. This paper is a preliminary report presenting some of DiBeRT contributions: a concise representation of external beliefs; a simple and innovative methodology to achieve distributed context management; and a reduced inter-agent data exchange format.

Simulation of rectifier voltage malfunction on OWECS, four-level converter, HVDC light link: Smart grid context tool

This paper presents a model for the simulation of an offshore wind system having a rectifier input voltage malfunction at one phase. The offshore wind system model comprises a variable-speed wind turbine supported on a floating platform, equipped with a permanent magnet synchronous generator using full-power four-level neutral point clamped converter. The link from the offshore floating platform to the onshore electrical grid is done through a light high voltage direct current submarine cable. The drive train is modeled by a three-mass model. Considerations about the smart grid context are offered for the use of the model in such a context. The rectifier voltage malfunction domino effect is presented as a case study to show capabilities of the model. (C) 2015 Elsevier Ltd. All rights reserved.

Creation and extension of ontologies for describing communications in the context of organizations

Thesis submitted to Faculdade de Ciências e Tecnologia of the Universidade Nova de Lisboa, in partial fulfillment of the requirements for the degree of Master in Computer Science

The Context Influence in Volunteers Motivations

Volunteers working in different areas or different NPO (Non-profit Organisations) are significantly different according to several variables, namely in terms of motivation, satisfaction and permanence. Thus, the main goal of this research is to understand volunteers’ motivations and the influence of the context on it. Additionally, demographic variables might have an important impact on volunteers’ activities, be an important predictor of volunteering and, at the same time, influence their time commitment. In this paper we present data from twelve different NPO - 10 hospitals and 2 food banks. The model of data collection was a survey conducted by self-administered questionnaire. The results showed significant differences between the volunteers’ belonging to the two organisations and their motivations, confirming that volunteer’ motivations differ according the type/nature of organisation; this is particularly important because the field in which one works is influenced by a self-evident affinity with shared ideologies, religious convictions, and collective identities. These results present important outcomes that should be reflected in the way organisations act. Keywords: Volunteering; Occasional and permanent volunteers; Motivations; Non-profit organisations.