A Surface Displacement Analysis for Volcan Pacaya from October 2001 through March 2013 by Means of 3-D Modeling of Precise Position GPS Data

Volcán Pacaya is one of three currently active volcanoes in Guatemala. Volcanic activity originates from the local tectonic subduction of the Cocos plate beneath the Caribbean plate along the Pacific Guatemalan coast. Pacaya is characterized by generally strombolian type activity with occasional larger vulcanian type eruptions approximately every ten years. One particularly large eruption occurred on May 27, 2010. Using GPS data collected for approximately 8 years before this eruption and data from an additional three years of collection afterwards, surface movement covering the period of the eruption can be measured and used as a tool to help understand activity at the volcano. Initial positions were obtained from raw data using the Automatic Precise Positioning Service provided by the NASA Jet Propulsion Laboratory. Forward modeling of observed 3-D displacements for three time periods (before, covering and after the May 2010 eruption) revealed that a plausible source for deformation is related to a vertical dike or planar surface trending NNW-SSE through the cone. For three distinct time periods the best fitting models describe deformation of the volcano: 0.45 right lateral movement and 0.55 m tensile opening along the dike mentioned above from October 2001 through January 2009 (pre-eruption); 0.55 m left lateral slip along the dike mentioned above for the period from January 2009 and January 2011 (covering the eruption); -0.025 m dip slip along the dike for the period from January 2011 through March 2013 (post-eruption). In all bestfit models the dike is oriented with a 75° westward dip. These data have respective RMS misfit values of 5.49 cm, 12.38 cm and 6.90 cm for each modeled period. During the time period that includes the eruption the volcano most likely experienced a combination of slip and inflation below the edifice which created a large scar at the surface down the northern flank of the volcano. All models that a dipping dike may be experiencing a combination of inflation and oblique slip below the edifice which augments the possibility of a westward collapse in the future.

Geo-Locating the Knowledge Transfer in StackOverflow

By analyzing the transactions in Stack Overflow we can get a glimpse of the way in which the different geographical regions in the world contribute to the knowledge market represented by the website. In this paper we aggregate the knowledge transfer from the level of the users to the level of geographical regions and learn that Europe and North America are the principal and virtually equal contributors; Asia comes as a distant third, mainly represented by India; and Oceania contributes less than Asia but more than South America and Africa together.

Characterization of Hsp70 binding and nucleotide exchange by the yeast Hsp110 chaperone Sse1.

SSE1 and SSE2 encode the essential yeast members of the Hsp70-related Hsp110 molecular chaperone family. Both mammalian Hsp110 and the Sse proteins functionally interact with cognate cytosolic Hsp70s as nucleotide exchange factors. We demonstrate here that Sse1 forms high-affinity (Kd approximately 10-8 M) heterodimeric complexes with both yeast Ssa and mammalian Hsp70 chaperones and that binding of ATP to Sse1 is required for binding to Hsp70s. Sse1.Hsp70 heterodimerization confers resistance to exogenously added protease, indicative of conformational changes in Sse1 resulting in a more compact structure. The nucleotide binding domains of both Sse1/2 and the Hsp70s dictate interaction specificity and are sufficient for mediating heterodimerization with no discernible contribution from the peptide binding domains. In support of a strongly conserved functional interaction between Hsp110 and Hsp70, Sse1 is shown to associate with and promote nucleotide exchange on human Hsp70. Nucleotide exchange activity by Sse1 is physiologically significant, as deletion of both SSE1 and the Ssa ATPase stimulatory protein YDJ1 is synthetically lethal. The Hsp110 family must therefore be considered an essential component of Hsp70 chaperone biology in the eukaryotic cell.

Minderung physiologischer Reaktivität auf psychosozialen Stress durch Taiji-Training - wer profitiert besonders? Eine Untersuchung moderierender Effekte von selbstberichteter dispositioneller psychologischer Stressreaktivität und Achtsamkeit.

Theoretical background and objectives: Stress reducing effects of Taiji practice have been repeatedly reported. The aim of the present study was to investigate which persons benefit the most from Taiji practice in terms of reduced physiological stress reactivity. Methods: We conducted a secondary data analysis of a randomized controlled Taiji trial that significantly lowered stress reactivity of salivary cortisol and alpha-amylase in a Taiji group (n = 26) compared to a control group (n = 23). By using hierarchical regression analyses potential moderating influences of self-reported trait-mindfulness and trait values of general psychological stress reactivity on stress protective effects of a three months Taiji training were examined. Moderator variables were assessed at the beginning of the study using the Freiburg-Mindfulness-Inventory and the Perceived- Stress-Reactivity-Scale. Results: The interaction effect "study group x mindfulness" was significant for stress reactivity of salivary alpha-amylase (p = 0.050). Participants in the Taiji group with higher trait-mindfulness showed a lower salivary alpha-amylase stress reactivity, while in the control group higher trait-mindfulness was associated with higher alpha-amylase stress reactivity. In the control group (p = 0.042) but not in the Taiji group (p = 0.69) salivary cortisol stress reactivity was significantly increased in persons with higher trait-mindfulness scores. We could not find moderating effects of general psychological stress reactivity. Conclusion: Our results suggest that without intervention higher trait-mindfulness is associated with increased physiological stress reactivity. Persons with higher trait-mindfulness seem to benefit the most from practicing Taiji in terms of reduced sympathetic stress reactivity.

Psychological therapies for panic disorder with or without agoraphobia in adults: a network meta-analysis.

BACKGROUND Panic disorder is characterised by the presence of recurrent unexpected panic attacks, discrete periods of fear or anxiety that have a rapid onset and include symptoms such as racing heart, chest pain, sweating and shaking. Panic disorder is common in the general population, with a lifetime prevalence of 1% to 4%. A previous Cochrane meta-analysis suggested that psychological therapy (either alone or combined with pharmacotherapy) can be chosen as a first-line treatment for panic disorder with or without agoraphobia. However, it is not yet clear whether certain psychological therapies can be considered superior to others. In order to answer this question, in this review we performed a network meta-analysis (NMA), in which we compared eight different forms of psychological therapy and three forms of a control condition. OBJECTIVES To assess the comparative efficacy and acceptability of different psychological therapies and different control conditions for panic disorder, with or without agoraphobia, in adults. SEARCH METHODS We conducted the main searches in the CCDANCTR electronic databases (studies and references registers), all years to 16 March 2015. We conducted complementary searches in PubMed and trials registries. Supplementary searches included reference lists of included studies, citation indexes, personal communication to the authors of all included studies and grey literature searches in OpenSIGLE. We applied no restrictions on date, language or publication status. SELECTION CRITERIA We included all relevant randomised controlled trials (RCTs) focusing on adults with a formal diagnosis of panic disorder with or without agoraphobia. We considered the following psychological therapies: psychoeducation (PE), supportive psychotherapy (SP), physiological therapies (PT), behaviour therapy (BT), cognitive therapy (CT), cognitive behaviour therapy (CBT), third-wave CBT (3W) and psychodynamic therapies (PD). We included both individual and group formats. Therapies had to be administered face-to-face. The comparator interventions considered for this review were: no treatment (NT), wait list (WL) and attention/psychological placebo (APP). For this review we considered four short-term (ST) outcomes (ST-remission, ST-response, ST-dropouts, ST-improvement on a continuous scale) and one long-term (LT) outcome (LT-remission/response). DATA COLLECTION AND ANALYSIS As a first step, we conducted a systematic search of all relevant papers according to the inclusion criteria. For each outcome, we then constructed a treatment network in order to clarify the extent to which each type of therapy and each comparison had been investigated in the available literature. Then, for each available comparison, we conducted a random-effects meta-analysis. Subsequently, we performed a network meta-analysis in order to synthesise the available direct evidence with indirect evidence, and to obtain an overall effect size estimate for each possible pair of therapies in the network. Finally, we calculated a probabilistic ranking of the different psychological therapies and control conditions for each outcome. MAIN RESULTS We identified 1432 references; after screening, we included 60 studies in the final qualitative analyses. Among these, 54 (including 3021 patients) were also included in the quantitative analyses. With respect to the analyses for the first of our primary outcomes, (short-term remission), the most studied of the included psychological therapies was CBT (32 studies), followed by BT (12 studies), PT (10 studies), CT (three studies), SP (three studies) and PD (two studies).The quality of the evidence for the entire network was found to be low for all outcomes. The quality of the evidence for CBT vs NT, CBT vs SP and CBT vs PD was low to very low, depending on the outcome. The majority of the included studies were at unclear risk of bias with regard to the randomisation process. We found almost half of the included studies to be at high risk of attrition bias and detection bias. We also found selective outcome reporting bias to be present and we strongly suspected publication bias. Finally, we found almost half of the included studies to be at high risk of researcher allegiance bias.Overall the networks appeared to be well connected, but were generally underpowered to detect any important disagreement between direct and indirect evidence. The results showed the superiority of psychological therapies over the WL condition, although this finding was amplified by evident small study effects (SSE). The NMAs for ST-remission, ST-response and ST-improvement on a continuous scale showed well-replicated evidence in favour of CBT, as well as some sparse but relevant evidence in favour of PD and SP, over other therapies. In terms of ST-dropouts, PD and 3W showed better tolerability over other psychological therapies in the short term. In the long term, CBT and PD showed the highest level of remission/response, suggesting that the effects of these two treatments may be more stable with respect to other psychological therapies. However, all the mentioned differences among active treatments must be interpreted while taking into account that in most cases the effect sizes were small and/or results were imprecise. AUTHORS' CONCLUSIONS There is no high-quality, unequivocal evidence to support one psychological therapy over the others for the treatment of panic disorder with or without agoraphobia in adults. However, the results show that CBT - the most extensively studied among the included psychological therapies - was often superior to other therapies, although the effect size was small and the level of precision was often insufficient or clinically irrelevant. In the only two studies available that explored PD, this treatment showed promising results, although further research is needed in order to better explore the relative efficacy of PD with respect to CBT. Furthermore, PD appeared to be the best tolerated (in terms of ST-dropouts) among psychological treatments. Unexpectedly, we found some evidence in support of the possible viability of non-specific supportive psychotherapy for the treatment of panic disorder; however, the results concerning SP should be interpreted cautiously because of the sparsity of evidence regarding this treatment and, as in the case of PD, further research is needed to explore this issue. Behaviour therapy did not appear to be a valid alternative to CBT as a first-line treatment for patients with panic disorder with or without agoraphobia.

Biochemical and genetic characterization of the Saccharomyces cerevisiae Hsp110 molecular chaperone Sse1

The Ssel/Hsp110 molecular chaperones are a poorly understood subgroup of the Hsp70 chaperone family. Hsp70 can refold denatured polypeptides via a carboxyl-terminal peptide binding domain (PBD), which is regulated by nucleotide cycling in an amino-terminal ATPase domain. However, unlike Hsp70, both Sse1 and mammalian Hsp110 bind unfolded peptide substrates but cannot refold them. To test the in vivo requirement for interdomain communication, SSE1 alleles carrying amino acid substitutions in the ATPase domain were assayed for their ability to complement sse1Δ phenotypes. Surprisingly, all mutants predicted to abolish ATP hydrolysis complemented the temperature sensitivity of sse1Δ, whereas mutations in predicted ATP binding residues were non-functional. Remarkably, the two domains of Ssel when expressed in trans functionally complement the sse1Δ growth phenotype and interact by coimmunoprecipitation analysis, indicative of a novel type of interdomain communication. ^ Relatively little is known regarding the interactions and cellular functions of Ssel. Through co-immunoprecipitation analysis, we found that Ssel forms heterodimeric complexes with the abundant cytosolic Hsp70s Ssa and Ssb in vivo. Furthermore, these complexes can be efficiently reconstituted in vitro using purified proteins. The ATPase domains of Ssel and the Hsp70s were found to be critical for interaction as inactivating point mutations severely reduced interaction efficiency. Ssel stimulated Ssal ATPase activity synergistically with the co-chaperone Ydj1 via a novel nucleotide exchange activity. Furthermore, FES1, another Ssa nucleotide exchange factor, can functionally substitute for SSE1/2 when overexpressed, suggesting that Hsp70 nucleotide exchange is the fundamental role of the Sse proteins in yeast, and by extension, the Hsp110 homologs in mammals. ^ Cells lacking SSE1 were found to accumulate prepro-α-factor, but not the cotranslationally imported protein Kar2, similar to mutants in the Ssa chaperones. This indicates that the interaction between Ssel and Ssa is functionally significant in vivo. In addition, sse10 cells are compromised for cell wall strength, likely a result of decreased Hsp90 chaperone activity with the cell integrity MAP kinase SIC. Taken together, this work established that the Hsp110 family must be considered an essential component of Hsp70 chaperone biology in the eukaryotic cell.^

Rb, Sr, Sm and Nd concentrations and isotopic composition of basalts from DSDP Leg 74 (Table 1)

Basement intersected in DSDP holes 525A, 528 and 527 on the Walvis Ridge consists of submarine basalt flows and pillows with minor intercalated sediments. These holes are situated on the crest and mid and lower northwest flank of a NNW-SSE-trending ridge block which would have closely paralleled the paleo mid-ocean ridge (Rabinowitz and LaBrecque, 1979 doi:10.1029/JB084iB11p05973, Moore et al. (1983 doi:10.1130/0016-7606(1983)94<907:TWRTDS>2.0.CO;2). The basalts were erupted approximately 70 m.y. ago, an age equivalent to that of immediately adjacent oceanic crust in the Angola Basin and coraistent with formation at the paleo mid-ocean ridge (Moore et al., 1983). The basalt types vary from aphyric quartz tholeiites on the ridge crest to highly plagioclase phyric olivine tholeiites on the ridge flank. These show systematic differences in incompatible trace element and isotopic composition. Many element and isotope ratio pairs form systematic trends with the ridge crest basalts at one end and the highly phyric ridge flank basalts at the other. The low 143Nd/144Nd (0.51238), 206Pb/204Pb (17.54), 207Pb/204Pb (15.47), 208Pb/204Pb (38.14) and high 87Sr/86Sr (0.70512) ratios of the ridge crest basalts suggest derivation from an old Nd/Sm-, Rb/Sr- and Pb/U-enriched mantle source. This isotopic signature is similar to that of alkaline basalts on Tristan da Cunha but offset to significantly lower Nd and Pb isotopic ratios. The isotopic ratio trends may be extrapolated beyond the ridge flank basalts with higher 143Nd/144Nd (0.51270), 206Pb/204Pb (18.32), 207Pb/204Pb (15.52), 208Pb/204Pb (38.77) and lower 87Sr/86Sr (0.70417) ratios in the direction of increasingly Nd/Sm-, Rb/Sr- and Pb/U-depleted source compositions. These isotopic correlations are equally consistent with mixing of depleted and enriched end member melts or partial melting of an inhomogeneous, variably enriched mantle source. However, observed Zr-Ba-Nb-Y interelement relationships are inconsistent with any simple two-component model of magma mixing, as might result from the rise of a lower mantle plume through the upper mantle. Incompatible element and Pb isotopic systematics also preclude extensive involvement of depleted (N-type) MORB material or its mantle sources. In our preferred petrogenetic model the Walvis Ridge basalts were derived by partial melting of mantle similar to an enriched (E-type) MORB source which had become heterogeneous on a small scale due to the introduction of small-volume melts and metasomatic fluids.

Geología de las ultramafitas pre-andinas de Tapo y Acobamba, Tarma, en la Cordillera Oriental de Perú

Ultramafic rocks occur scattered along a 300 km long NNW-SSE trending belt, parallel to the central Peruvian Andes in the Cordillera Oriental, from Tarma (Junín Dept.) to Huancapallac and Tingo María (Huánuco Dept.). The Tarma occurrences (Tapo and Acobamba) are dealt with here, as the first step of a broader research. The Tapo massif comprises strongly tectonised serpentinites with scarce peridotitic relics, amphibolites and podiform chromitites. It was overthrust on early Carboniferous metasedimentary rocks of the Andean basement (Ambo Group), and it shows evidences of a pre-Andean deformational history, not observed in the Ambo Group; the basal thrust plane is folded by the Andean tectonics. The two smaller Acobamba occurrences are also allochtonous and show similar tectonic features. Major and trace element composition of amphibolites point to a tholeiitic basalt (to picrobasalt) protolith, compatible with an ocean-ridge or ocean-island environment. Small podiform chromitite lenses and chromite disseminations also occur; they are strongly deformed, metamorphosed and overprinted by hydrothermal alteration related to deformation, and were the subject of small scale mining. The ores comprise mainly chromite, ferritchromite, spinel, magnetite, ilmenite and scarce sulphides, as well as the secondary minerals stichtite and nimite. Results of this work exclude current interpretations of the Tarma ultramafites as autochtonous igneous intrusives, and point to a new interpretation for their emplacement.

Estudio de los materiales que componen el sistema constructivo de las viviendas del casco histórico de Maracaibo (Venezuela)

En este trabajo de investigación que se presenta para optar al grado de Doctor, se analizan y estudian los materiales que conforman las viviendas de mampostería de arenisca “Piedra de Ojo” del casco histórico de Maracaibo, Venezuela, construidas en el siglo XIX. No existe una bibliografía descriptiva técnico-constructiva del sistema constructivo, por lo que esta tesis complementa la escasa descripción estilística existente donde apenas se mencionan algunos materiales de construcción. Definido el marco histórico y las manzanas del área en donde se encontraban las viviendas preseleccionadas a estudiar, en la visita de campo se seleccionaron 12 que se encontraban en estado de deterioro, y que permitieron recolectar las muestras más fácilmente. Para realizar la caracterización y comportamientos de los diferentes materiales utilizados: piedra y morteros en los cerramientos, maderas en armaduras de tejados, techos y carpintería de puertas y ventanas, cerámicos en muros y acabados, etc. Para complementar lo antes dicho se ha dividido esta tesis en seis capítulos: En el capítulo I se desarrolla el estado del arte a nivel nacional e internacional de trabajos de investigación, similares. Se aborda la memoria histórica, que es una reseña de la evolución de la vivienda en la ciudad de Maracaibo. En el capítulo II se describe la metodología empleada en la tesis, de acuerdo a los objetivos, tanto generales como específicos de la investigación. Que ha cubierto diferentes frentes: consulta bibliográfica, levantamiento planimétrico, toma de muestras, análisis de visu, caracterización físico-química y correlación de resultados. Se ha desarrollado el trabajo tanto in situ como en laboratorio y despacho. El capítulo III presenta la caracterización de la arenisca “Piedra de Ojo”, se desarrolla: la descripción geológica y caracterización petrológica. Se reseñan los ensayos realizados en laboratorio como: caracterización de visu, caracterización petrográfica, estudio petrográfico por microcopia óptica de trasmisión, estudio petrográfico por microcopia electrónica de barrido, microscopia electrónica de barrido en modo electrones secundarios (SSE) y microscopia electrónica de barrido en modo electrones retrodispersados. También las propiedades escalares de los mampuestos y los siguientes valores: densidades, porosidades y resistencia mecánicas, entre otros. En el capítulo IV se analizan las características de los morteros aplicados en las viviendas, y la patología o lesiones que presentan. Se clasifican en tres tipos: mortero de junta o asiento, de enfoscado y revoco. Se documenta la realización de los ensayos físicos y químicos, resistencia mecánica y de granulometría; se explican sus componentes principales: conglomerante de cal, áridos y aditivos y la tecnología de fabricación, así como las características físicas, hídricas, químicas y granulométricas. El capítulo V, contiene las aplicaciones constructivas de los materiales de albañilería, Se describen otros elementos de la vivienda como; cimentaciones, muros mixtos, molduras, apliques y pinturas y finalmente pavimentos. Y en el capítulo VI se analizan las especies de madera más representativas usadas en las armaduras de las cubiertas, así como los elementos de cubrición. De igual forma se describe la carpintería de puertas y ventanas, así como sus dinteles o cargaderos de madera y se realiza la identificación anatómica, las propiedades físicas y mecánicas de las utilizadas. Entre los resultados y conclusiones se determinó que el 90% de los materiales utilizados en su construcción proceden de zonas cercanas a la construcción de la vivienda, como la formación El Milagro convertida en cantera de piedra y que el resto de los materiales provenían de la Isla de Toas y de la exportación de las islas del Caribe y de Europa como el cemento. El principal aporte de esta investigación es el análisis técnico constructivo y la caracterización física, mecánica y química de los materiales de la vivienda, con el fin de que dicha información sea usada para definir los materiales nuevos a utilizar en las restauraciones de las viviendas y en futuras líneas de investigación. ABSTRACT In this research paper submitted to opt to the degree of Doctor, the materials that make the “Piedra de Ojo” sandstone masonry houses of the historical center of Maracaibo, Venezuela, built in the XIX century, are analyzed and studied. There exists no technical-constructive descriptive literature of the constructive system, so this thesis complements the very limited existing stylistic description, where barely some construction materials are mentioned. With the historical context and the blocks of the area where the preselected houses to be studied being defined, 12 of these houses that were in a state of decay (deterioration) were selected and this condition allowed to collect samples more easily, in order to carry out the characterization and behavior of the different materials used: stone and mortars in the walls, wood trusses in roofs, ceilings and woodwork of doors and windows, walls and ceramic finishes, etc. To complement the foregoing, this thesis has been divided in six chapters: In Chapter I, the state of art at national and international levels of similar research is developed, which is a review of the evolution of housing in the city of Maracaibo. In Chapter II, the methodology used in the thesis is described, according to the research’s objectives, general and specific ones, which have covered several fronts: literature survey, planimetric survey, sampling, visu analysis, physical-chemical characterization and correlation of results. Chapter III presents the characterization of the “Piedra de Ojo” sandstone; geological description and petrologic characterization are developed. Essays performed in the laboratory are reviewed, such as: visu characterization, petrographic characaterization, petrographic study by optical microscopy of transmission, petrographic study by electronic scanning microscopy in secondary electron mode (SSE) and electron microscopy scaning by backscattered electron mode. Also scalar properties of the masonry and the following: density, porosity and mechanical resistance, among others. In Chapter IV, characteristics of the mortars used in the houses are analyzed and pathology or damages are presented. They are classified into three types: grout, cement render and plaster. Physical and chemical testing, mechanical strength and grain size (granulometric) is documented; its main components are explained: lime binder, aggregates and additives and manufacturing technology as well as the physical, water, chemical and granulometric characteristics. Chapter V contains the constructive applications of masonry materials. Other housing elements are described, such as; foundations, mixed walls, moldings, wall paintings and finally floorings (pavements). And in chapter VI the most representative species of wood used in the overhead fixtures and cover elements are analyzed. Likewise, woodwork of doors and windows and their wooden lintels or landings are described; anatomical identification and physical and mechanical properties of the ones used is made. The results and conclusions determined that 90% of the materials used in its construction came from areas near the construction of housing, such as El Milagro formation, converted into stone quarry and other materials came from the Toas Island and from the export of the Caribbean islands and Europe, such as cement. The main contribution of this research is the constructive technical analysis and physical, mechanical and chemical characterization of the materials of the houses, in order that such information is used to define the new materials to be used in the housing restoration and future research lines.

Comprehensive Validation Of A Measure Of Student School Engagement: A Pilot Study Of Middle School Students

Although it may sound reasonable that American education continues to be more effective at sending high school students to college, in a study conducted in 2009, The Council of the Great City Schools states that "slightly more than half of entering ninth grade students arrive performing below grade level in reading and math, while one in five entering ninth grade students is more than two years behind grade level...[and] 25% received support in the form of remedial literacy instruction or interventions" (Council of the Great City Schools, 2009). Students are distracted with technology (Lei & Zhao, 2005), family (Xu & Corno, 2003), medical illnesses (Nielson, 2009), learning disabilities and perhaps the most detrimental to academic success, the very lack of interest in school (Ruch, 1963). In a Johns Hopkins research study, Building a Graduation Nation - Colorado (Balfanz, 2008), warning signs were apparent years before the student dropped out of high school. The ninth grade was often referenced as a critical point that indicated success or failure to graduate high school. The research conducted by Johns Hopkins illustrates the problem: students who become disengaged from school have a much greater chance of dropping out of high school and not graduating. The first purpose of this study was to compare different measurement models of the Student School Engagement (SSE) using Factor Analysis to verify model fit with student engagement. The second purpose was to determine the extent to which the SSE instrument measures student school engagement by investigating convergent validity (via the SSE and Appleton, Christenson, Kim and Reschly's instrument and Fredricks, Blumenfeld, Friedel and Paris's instrument), discriminant validity (via Huebner's Student Life Satisfaction Survey) and criterion-related validity (via the sub-latent variables of Aspirations, Belonging and Productivity and student outcome measures such as achievement, attendance and discipline). Discriminant validity was established between the SSE and the Appleton, Christenson, Kim and Reschly's model and Fredricks, Blumenfeld, Friedel and Paris's (2005) Student Engagement Instruments (SEI). When confirming discriminant validity, the SSE's correlations were weak and statistically not significant, thus establishing discriminant validity with the SLSS. Criterion-related validity was established through structural equation modeling when the SSE was found to be a significant predictor of student outcome measures when both risk score and CSAP scores were used. The third purpose of this study was to assess the factorial invariance of the SSE instrument across gender to ensure the instrument is measuring the intended construct across different groups. Conclusively, configural, weak and metric invariances were established for the SSE as a non-significant change in chi-square indicating that all parameters including the error variances were invariant across groups of gender. Engagement is not a clearly defined psychological construct; it requires more research in order to fully comprehend its complexity. Hopefully, with parental and teacher involvement and a sense of community, student engagement can be nurtured to result in a meaningful attachment to school and academic success.

Procesamiento de imágenes y control de un hexacóptero

En este proyecto se pretende diseñar un sistema embebido capaz de realizar procesamiento de imágenes y guiado de un hexacóptero. El hexacóptero dispondrá a bordo de una cámara así como las baterías y todo el hardware necesario para realizar el procesamiento de la información visual obtenida e implementar el controlador necesario para permitir su guiado. OpenCV es una biblioteca de primitivas de procesado de imagen que permite crear algoritmos de Visión por Computador de última generación. OpenCV fue desarrollado originalmente por Intel en 1999 para mostrar la capacidad de procesamiento de los micros de Intel, por lo que la mayoría de la biblioteca está optimizada para correr en estos micros, incluyendo las extensiones MMX y SSE. http://en.wikipedia.org/wiki/OpenCV Actualmente es ampliamente utilizada tanto por la comunidad científica como por la industria, para desarrollar nuevos algoritmos para equipos de sobremesa y sobre todo para sistemas empotrados (robots móviles, cámaras inteligentes, sistemas de inspección, sistemas de vigilancia, etc..). Debido a su gran popularidad se han realizado compilaciones de la biblioteca para distintos sistemas operativos tradicionales (Windows, Linux, Mac), para dispositivos móviles (Android, iOS) y para sistemas embebidos basados en distintos tipos de procesadores (ARM principalmente). - iPhone port: http://www.eosgarden.com/en/opensource/opencv-ios/overview/ - Android port: http://opencv.willowgarage.com/wiki/AndroidExperimental Un ejemplo de plataforma embebida es la tarjeta Zedboard (http://www.zedboard.org/), que representa el estado del arte en dispositivos embebidos basados en la arquitectura Cortex de ARM. La tarjeta incluye un procesador Cortex-A9 dual core junto con una gran cantidad de periféricos y posibilidades de conexión a tarjetas de expansión de terceras partes, lo que permite desarrollar aplicaciones en muy distintos campos de la Visión por Computador.

Removal of antibiotic compounds by adsorption using glycerol-based carbon materials

This study is focused on the synthesis and application of glycerol-based carbon materials (GBCM200, GBCM300 and GBCM350) as adsorbents for the removal of the antibiotic compounds flumequine and tetracycline from aqueous solution. The synthesis enrolled the partial carbonization of a glycerol-sulfuric acid mixture, followed by thermal treatments under inert conditions and further thermal activation under oxidative atmosphere. The textural properties were investigated through N2 adsorption–desorption isotherms, and the presence of oxygenated groups was discussed based on zeta potential and Fourier transform infrared (FTIR) data. The kinetic data revealed that the equilibrium time for flumequine adsorption was achieved within 96 h, while for tetracycline, it was reached after 120 h. Several kinetic models, i.e., pseudo-first order, pseudo-second order, fractional power, Elovich and Weber–Morris models, were applied, finding that the pseudo-second order model was the most suitable for the fitting of the experimental kinetic data. The estimated surface diffusion coefficient values, Ds, of 3.88 and 5.06 10 14 m2 s 1, suggests that the pore diffusion is the rate limiting step of the adsorption process. Finally, as it is based on SSE values, Sips model well-fitted the experimental FLQ and TCN adsorption isotherm data, followed by Freundlich equation. The maximum adsorption capacities for flumequine and tetracycline was of 41.5 and 58.2 mg g 1 by GBCM350 activated carbon.

MOREMATA: Stata module (Mata) to provide various functions

This package includes various Mata functions. kern(): various kernel functions; kint(): kernel integral functions; kdel0(): canonical bandwidth of kernel; quantile(): quantile function; median(): median; iqrange(): inter-quartile range; ecdf(): cumulative distribution function; relrank(): grade transformation; ranks(): ranks/cumulative frequencies; freq(): compute frequency counts; histogram(): produce histogram data; mgof(): multinomial goodness-of-fit tests; collapse(): summary statistics by subgroups; _collapse(): summary statistics by subgroups; gini(): Gini coefficient; sample(): draw random sample; srswr(): SRS with replacement; srswor(): SRS without replacement; upswr(): UPS with replacement; upswor(): UPS without replacement; bs(): bootstrap estimation; bs2(): bootstrap estimation; bs_report(): report bootstrap results; jk(): jackknife estimation; jk_report(): report jackknife results; subset(): obtain subsets, one at a time; composition(): obtain compositions, one by one; ncompositions(): determine number of compositions; partition(): obtain partitions, one at a time; npartitionss(): determine number of partitions; rsubset(): draw random subset; rcomposition(): draw random composition; colvar(): variance, by column; meancolvar(): mean and variance, by column; variance0(): population variance; meanvariance0(): mean and population variance; mse(): mean squared error; colmse(): mean squared error, by column; sse(): sum of squared errors; colsse(): sum of squared errors, by column; benford(): Benford distribution; cauchy(): cumulative Cauchy-Lorentz dist.; cauchyden(): Cauchy-Lorentz density; cauchytail(): reverse cumulative Cauchy-Lorentz; invcauchy(): inverse cumulative Cauchy-Lorentz; rbinomial(): generate binomial random numbers; cebinomial(): cond. expect. of binomial r.v.; root(): Brent's univariate zero finder; nrroot(): Newton-Raphson zero finder; finvert(): univariate function inverter; integrate_sr(): univariate function integration (Simpson's rule); integrate_38(): univariate function integration (Simpson's 3/8 rule); ipolate(): linear interpolation; polint(): polynomial inter-/extrapolation; plot(): Draw twoway plot; _plot(): Draw twoway plot; panels(): identify nested panel structure; _panels(): identify panel sizes; npanels(): identify number of panels; nunique(): count number of distinct values; nuniqrows(): count number of unique rows; isconstant(): whether matrix is constant; nobs(): number of observations; colrunsum(): running sum of each column; linbin(): linear binning; fastlinbin(): fast linear binning; exactbin(): exact binning; makegrid(): equally spaced grid points; cut(): categorize data vector; posof(): find element in vector; which(): positions of nonzero elements; locate(): search an ordered vector; hunt(): consecutive search; cond(): matrix conditional operator; expand(): duplicate single rows/columns; _expand(): duplicate rows/columns in place; repeat(): duplicate contents as a whole; _repeat(): duplicate contents in place; unorder2(): stable version of unorder(); jumble2(): stable version of jumble(); _jumble2(): stable version of _jumble(); pieces(): break string into pieces; npieces(): count number of pieces; _npieces(): count number of pieces; invtokens(): reverse of tokens(); realofstr(): convert string into real; strexpand(): expand string argument; matlist(): display a (real) matrix; insheet(): read spreadsheet file; infile(): read free-format file; outsheet(): write spreadsheet file; callf(): pass optional args to function; callf_setup(): setup for mm_callf().

Folkenes historie : fremstillet af nordiske historikere under redaktion af Johan Ottosen og Niels Møller.

Bibliographies at ends of chapters.

Trésor de livres rares et précieux; ou, Nouveau dictionaire bibliographique contenant plus de cent mille articles de livres rares, curieux et recherchés, d'ouvrages de luxe, etc. avec les signes connus pour distinguer les éditions originales des contrefaçons qui en ont été faites, des notes sur la rareté et le mérite des livres cites et les prix que ces livres ont atteints dans les ventes les plus fameuses, et qu'ils conservent encore dans les magasins des bouquinistes les plus renommés de l'Europe,

Reproduction (v. 1-4, Helioplandruck (ges. gesch.) von F. A. Brockhaus, Leipzig; v. 5-7, Rodar-druck von C. G. Röder, g. m. b. h., Leipzig) of the original edition, Dresde, 1859-69.