Structural analysis of the Pimelodus maculatus (Lacépède, 1803) embryogenesis (Siluriformes: Pimelodidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seasonal variation of biomass and productivity of the periphytic community on artificial substrata in the Jurumirim Reservoir (São Paulo, Brazil)

The seasonal variation of the periphytic community attached to an artificial substratum (glass tubes) was studied during two different periods in a lagoon connected to the Paranapanema River, the main tributary of the Jurumirim Reservoir (São Paulo-Brazil). An analysis of dry weight, ash free dry weight, chlorophyll a, phaeophytin and primary productivity of periphyton was carried out. The first experiment lasted from August to December 1993, the second from February to June 1994. Tubes were removed after 7, 14, 21, 28, 60, 90 and 119 days of incubation. In the 1st experiment, the periphytic community reached a higher biomass after the 4th week of colonization (28th day), in the 2nd experiment after the 2nd week (14th day). This discrepancy is related to seasonal differences in environmental factors (water temperature, nutrients concentrations and water discharge) that determine initial colonization. After the first stages of colonization, the biomass and primary productivity of periphyton reached their maximum values after the 60th day of incubation. In both experiments, three developmental phases could be discerned. In the initial phase, an exponential growth was observed. In the second phase, the bioderm reached its maximum biomass and productivity. In the third phase, a decrease of biomass and productivity occurred.

Annual and short-term variability in primary productivity by phytoplankton and correlated abiotic factors in the Jurumirim Reservoir (São Paulo, Brazil)

A variabilidade anual da produção fotossintética (PP) pelo fitoplâncton na zona da barragem da Represa de Jurumirim (São Paulo, Brasil) foi medida após um estudo no período de três anos sucessivos, com o objetivo de identificar padrões recorrentes e suas causas. Medidas da variabilidade da PP em escala diária foram obtidas em dois períodos do ano (estações seca e chuvosa). Nenhum padrão recorrente foi verificado nos dados de PP, visto não haver relação de sua variabilidade com nenhum fator hidrológico (precipitação, nível e vazão de água e washout) nem, aparentemente, com as condições nutritivas da água. A análise de componentes principais revelou que a PP e a taxa de assimilação foram mais elevadas na época do ano em que o conteúdo de PO4(3-) e N-NH4+ foi mais baixo e quando as razões Z EU/Z MIX foram mais elevadas. A produtividade primária/área pode ser estimada pela razão entre a produtividade volumétrica máxima e o coeficiente de extinção vertical da luz. Entretanto, a biomassa integrada na Z EU foi um pobre preditor da produtividade primária/área. Nenhuma correlação foi encontrada entre a temperatura da água com a produtividade primária (por área e volumétrica máxima). em conseqüência, o estudo da PP em três anos sucessivos mostrou que o padrão de variabilidade é tipicamente caótico. em relação às medidas de curta duração, maior PP foi encontrada na estação seca do que na chuvosa. em ambos os períodos, a variabilidade da PP (por área) foi de aproximadamente 35-40%. O padrão foi atribuído não somente à variação na concentração dos nutrientes mas também à magnitude de penetração de luz na água associado ao regime de circulação. Um comentário sobre a relação entre produção primária pelo fitoplâncton com produção pesqueira é também apresentada.

Structural control over well productivity in the Jundiaí River Catchment, Southeastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Oxisol subsurface chemical attributes related to sugarcane productivity

Embora haja homogeneidade nas características morfológicas na classe dos Latossolos, existe grande diversidade química na subsuperfície. Trabalhos indicam que a produção agrícola apresenta correlação significativa com atributos químicos de subsuperfície, que são mais estáveis que na camada arável, sujeita a alterações decorrentes da exploração agrícola. Pelo exposto, o presente estudo avaliou os efeitos dos atributos químicos de subsuperfície de Latossolos da região Centro-Sul do Brasil na produtividade agrícola dos três primeiros cortes de clones de cana-de-açúcar e da variedade RB72454. Utilizaram-se os dados de produtividade agrícola correspondentes ao período de 1993 a 1998. Os solos foram caracterizados sob o ponto de vista granulométrico e químico na profundidade entre 0,8 e 1,0 m e foram feitos estudos de correlação entre tais atributos e as médias de produtividade agrícola diária durante o ciclo dos clones de cada ensaio e da variedade RB72454 e análise de regressão múltipla, com as variáveis selecionadas pelo procedimento stepwise em função do R². As características químicas de subsuperfície dos Latossolos influenciaram na produtividade agrícola da cana-de-açúcar, principalmente no 3º corte. Para as médias dos clones, o modelo de produtividade do 3º corte em função de saturação por bases e fósforo, mostra R² = 0,31, ou seja, que 31% da variação de TCH dia-1 pode ser explicada por esses dois atributos. No caso da variedade RB72454, essa mesma variação no 3º corte é explicada em 47% pelos atributos soma de bases e teores de cálcio e matéria orgânica. As variações de produtividade de 1º e 2º cortes foram melhor explicadas pelo pHágua.

PRODUCTIVITY IN MASS CROSSES OF DROSOPHILA-STURTEVANTI - A COMPARATIVE-STUDY OF LABORATORY STOCKS AND RECENTLY COLLECTED FLIES

Drosophila sturtevanti from several geographic origins were analyzed for their capacity to intercross and to yield progeny. Mass intercrosses involving laboratory stocks and recently collected strains were fertile, which suggests that the genetic differentiation among these geographically isolated populations did not affect their reproductive patterns sufficiently to lead to reproductive isolation. Analysis of the number of progeny (productivity) in intracrosses and intercrosses was informative as to the amount of variation this feature exhibits in the laboratory stocks and in the recently collected strains. Also laboratory stocks and recently collected flies shared a positive correlation in that the greater the control productivity of a strain the greater the number of its intercrosses which exhibited reduced productivity.

Assessing the uncertainties of model estimates of primary productivity in the tropical Pacific Ocean

Depth-integrated primary productivity (PP) estimates obtained from satellite ocean color-based models (SatPPMs) and those generated from biogeochemical ocean general circulation models (BCGCMs) represent a key resource for biogeochemical and ecological studies at global as well as regional scales. Calibration and validation of these PP models are not straightforward, however, and comparative studies show large differences between model estimates. The goal of this paper is to compare PP estimates obtained from 30 different models (21 SatPPMs and 9 BOGCMs) to a tropical Pacific PP database consisting of similar to 1000 C-14 measurements spanning more than a decade (1983-1996). Primary findings include: skill varied significantly between models, but performance was not a function of model complexity or type (i.e. SatPPM vs. BOGCM); nearly all models underestimated the observed variance of PR specifically yielding too few low PP (< 0.2 g Cm-2 d(-1)) values; more than half of the total root-mean-squared model-data differences associated with the satellite-based PP models might be accounted for by uncertainties in the input variables and/or the PP data; and the tropical Pacific database captures a broad scale shift from low biomassnormalized productivity in the 1980s to higher biomass-normalized productivity in the 1990s, which was not successfully captured by any of the models. This latter result suggests that interdecadal and global changes will be a significant challenge for both SatPPMs and BOGCMs. Finally, average root-mean-squared differences between in situ PP data on the equator at 140 degrees W and PP estimates from the satellite-based productivity models were 58% lower than analogous values computed in a previous PP model comparison 6 years ago. The success of these types of comparison exercises is illustrated by the continual modification and improvement of the participating models and the resulting increase in model skill. (C) 2008 Elsevier BY. All rights reserved.

Nutrients foliar content for high productivity cultivars of guava in Brazil

Commonly grown in tropical and sub-tropical regions, guava (Psidium guajava L.) is an important fruit crop of Brazil. It is cultivated on a large scale in São Paulo state, and covers about 6,500 hectares. As a result of the guava selection program developed at FCAV/UNESP, two new cultivars were created: 'Rica' and 'Paluma' with a high productivity, and also with higher nutritional requirement. Leaves analysis has become a powerful tool in mineral-nutrition research with fruit crops, not only to determine response to different nutrients, but also for diagnostic techniques in making fertilizer recommendations and assessing deficiency symptoms. Nutrient composition of the leaves varies depending on the leaf maturity, tree age, variety and nutrient supply. For the interpretation of analytical values, selection of the index tissue is important. The results of experiments conducted in the field during 1989-2000 were studied. The nutritional status was evaluated by annual leaf sampling, carried out at full bloom. Recent fully developed leaves, corresponding to the third pair (with the petiole) were collected, starting at the end of the branch, all around the tree, at a height of 1.5 m from the soil, with a total of 30 leaf pairs per sample. The yield was evaluated by weighing all the fruits in the useful area of each lot. Foliar chemical analysis showed excellent correlation with the fruit production. Through the results it was verified that the maximum yield was associated to the following levels: N = 22-26; P = 1.5-1.9; K = 17-20; Ca = 11-15; Mg = 2.5-3.5; S = 3.0-3.5 g kg -1; B = 20-25; Cu = 10-40; Fe = 50-150; Mn = 180-250; Zn = 25-35 mg kg-1 DW in the leaves of the 'Rica' guava and to N = 20-23; P = 1.4-1.8; K = 14-17; Ca = 7-11; Mg = 3.4-4.0; S = 2.5-3.5 g kg-1; B = 20-25; Cu = 20-40; Fe = 60-90; Mn = 40-80; Zn = 25-35 mg kg-1 DW in the leaves of the 'Paluma' guava.

Growth and yield analysis in different methods of beet (Cv. 'tall top early wonder') plantation

This objective of this study was to evaluate the effects of different methods of red beet seedling production and direct sowing on the development of the plant in field conditions. 'Tall Top Early Wonder' was used as the cultivar. The experimental design was a randomized blocks with 4 replications of each treatment: T1 - seedling produced in trays of 288 cells; T2 - 200 cells; T3 - 128 cells; T4 - 128 cells; T5 - direct sowing and T6 - bare-root seedling. The seedlings produced in trays and bare root seedlings were transplanted in the field 28 DAS with spacing of 0.20 x 0.10m. The mean height of plants, leaf area, leaf dry matter, petiole dry matter, shoot dry matter, root dry matter, relationship between shoot dry matter and root dry matter, absolute growth rate, relative growth rate, net assimilation rate, leaf area ratio and specific leaf area were determined. Storage root fresh matter and mean storage root diameter were determined starting from 77 DAS. Initial growth of the plants were superior for the direct sowing, resulting in smaller RGR and NAR than the other treatments. Independent of the production method, an increase of the cycle of the crop was verified. T6 had larger delay in the initial development. There was no difference for productivity. Method T1, had less expenses with respect to substrate and space in the vegetation home, without reduction in production.

Phytoplankton primary productivity in an urban eutrophic reservoir (São Paulo, Brazil)

The aim of this study was to analyze temporal ..d vertical variation of the biomass and of phytoplankton primary productivity in an urban eutrophic reservoir, in relation to the physical and chemical characteristics of the water. The physical and chemical variables of the water were defined in the limnetic region of the reservoir, at depths of 0.0; 0.5; 1.0; 2.0; 3.0 and 4.0 meters. Three samples were taken to define both the physical and chemical variables, concomitantly with the biomass (chlorophyll-a and phaeophytin) and phytoplankton primary productivity (C-14 method). Based on data obtained on differences in depth of the mixture zone and the euphotic zone, it is hypothesised that, depending on the time of the year, phytoplankton is conditioned by differences in the light and nutrient regimes, which change according to the constant loads of nutrients thrown into the system. The highest concentration of chlorophyll-a in the photic zone of the limnetic region was observed in November 2000 (1,197.3 mg Chl L -1) and the lowest in November 1999 (94.0 mg ChI L -1), whereas the profiles of primary activity of phytoplankton presented the highest rates on the surface of the water column, with values varying from 84.7 (May 2000) to 1,376.7mg C m -3 h -1 (December 2000). Annual primary productivity was calculated at 1,567.0gC m -2y -1, considered euproductive. The primary productivity profiles reported in this study are typical of aquatic eutrophic systems, rich in plankton and with low light penetration. It can be stated that Garças Lake is a system that suffers from anthropogenic impact, through receiving large loads of organic pollution, reflecting on the physical and chemical characteristics of the water and on the high values of biomass and primary phytoplankton activity. © National Institute of Ecology, New Delhi.

Structural change and productivity growth, 20 years later: old problems, new opportunities

Includes bibliography

Trade in services in Latin America and the Caribbean: an analysis of recent trends

Includes bibliography

Social dimensions of economic development and productivity: inequality and social performance

Includes bibliography

Relationship between citrus productivity and indicators of uniformity in trickle irrigation system

In trickle irrigation systems, the design is based on the pre-established emission uniformity (EU) which is the combined result of the equipment characteristics and its hydraulic configuration. However, this desired value of the EU may not be confirmed by the final project (in field conditions) and neither by the yield uniformity. The hypotheses of this research were: a) the EU of a trickle irrigation system at field conditions is equal to the emission uniformity pre-established in the its design; b) EU has always the lowest value when compared with other indicators of uniformity; c) the discharge variation coefficient (VC) is not equal to production variation coefficient in the operational unit; d) the difference between the discharge variation coefficient and the productivity variation coefficient depends on the water depth applied. This study aimed to evaluate the relationship between EU used in the irrigation system design and the final yield uniformity. The uniformity indicators evaluated were: EU, distribution uniformity (UD) and the index proposed by Barragan & Wu (2005). They were compared estimating the performance of a trickle irrigation system applied in a citrus orchard with dimensions of 400m x 600m. The design of the irrigation system was optimized by a Linear Programming model. The tree rows were leveled in the larger direction and the spacing adopted in the orchard was 7m x 4m. The manifold line was always operating on a slope condition. The sensitivity analysis involved different slopes, 0, 3, 6, 9 and 12%, and different values of emission uniformity, 60, 70, 75, 80, 85, 90 and 94%. The citrus yield uniformity was evaluated by the variation coefficient. The emission uniformity (EU) after design differed from the EU pre-established, more sharply in the initial values lower than 90%. Comparing the uniformity indexes, the EU always generated lower values when compared with the UD and with the index proposed by Barragan. The emitter variation coefficient was always lower than the productivity variation coefficient. To obtain uniformity of production, it is necessary to consider the irrigation system uniformity and mainly the water depth to be applied.

Innovation, R and D investment and productivity in Chile

Includes bibliography