Replacement of water on a steel substrate by a surrounding oil reservoir

With an objective to replace a water droplet from a steel surface by oil we study here the impact of injecting a hydrophilic/lipophilic surfactant into the droplet or into the surrounding oil reservoir. Contact angle goniometery, Grazing angle FTIR spectroscopy and Atomic force microscopy are used to record the oil/water interfacial tension, surface energetics of the substrate under the oil and water phases as well as the corresponding physical states of the substrates. Such energetics reflect the rate at which the excess surfactant molecules accumulate at the water/oil interface and desorb into the phases. The molecules diffuse into the substrate from the phases and build up specific molecular configurations which, with the interfacial tension, control the non-equilibrium progress of and the equilibrium status of the contact line. The study shows that the most efficient replacement of water by the surrounding oil happens when a surfactant is sparingly soluble in the supplier oil phase and highly soluble in the recipient water phase.

On the High Frequency Dielectric Behavior of Castor Oil

The low frequency dielectric behavior of castor oil (a vegetable oil) has been analyzed quite exhaustively in the context of its application as impregnant in capacitors. For the sake of completeness and in order to understand the relaxation phenomena in this liquid dielectric, this high frequency dielectric study was undertaken. In order to compare its properties with a liquid dielectric used in similar application and whose high frequency behavior has been quite well analyzed, Arochlor 1476 was studied. It is observed that both liquids have distributed relaxation times. The distribution parameters together with the two distinct relaxation times have been calculated by measuring the average relaxation time. It has been found that the distinct relaxation times thus calculated represent the dielectric behavior quite satisfactorily. The average dipole moments, dipole radii and thermal activation energies for dipole relaxation have also been evaluated.

Comparative statistical aging studies on an oil-pressboard insulation model

Accelerated aging experiments have been conducted on a representative oil-pressboard insulation model to investigate the effect of constant and sequential stresses on the PD behavior using a built-in phase resolved partial discharge analyzer. A cycle of the applied voltage starting from the zero of the positive half cycle was divided into 16 equal phase windows (Φ1 to Φ16) and partial discharge (PD) magnitude distribution in each phase was determined. Based on the experimental results, three stages of aging mechanism were identified. Gumbel's extreme value distribution of the largest element was used to model the first stage of aging process. Second and subsequent stages were modeled using two-parameter Weibull distribution. Spearman's non-parametric rank correlation test statistic and Kolmogrov-Smirnov two sample test were used to relate the aging process of each phase with the corresponding process of the full cycle. To bring out clearly the effect of stress level, its duration and test procedure on the distribution parameters and hence of the aging process, non-parametric ANOVA techniques like Kruskal-Wallis and Fisher's LSD multiple comparison tests were used. Results of the analysis show that two phases (Φ13 and Φ14) near the vicinity of the negative voltage peak were found to contribute significantly to the aging process and their aging mechanism also correlated well with that of the corresponding full cycle mechanism. Attempts have been made to relate these results with the published work of other workers

Studies on the Aging Characteristics of Base Oil with Amine Based Antioxidant in Steel-on-Steel Lubricated Sliding

An industrial base oil, a blend of different paraffin fractions, is heated to 130 degrees C (1) in the ambient and (2) for use as a lubricant in a steel pin on a steel disk sliding experiment. The base oil was tested with and without test antioxidants: dimethyl disulfide (DMDS) and alkylated diphenylamine (ADPA). Primary and secondary oxidation products were monitored continuously by FTIR over a 100 h period. In addition, friction and wear of the steel pin were monitored over the same period and the chemical transformation of the pin surface was monitored by XPS. The objective of this work is to observe the catalytic action of the steel components on the oil aging process and the efficacy of the antioxidant to reduce oxidation of oil used in tribology as a lubricant. Possible mechanistic explanations of the aging process as well as its impact on friction and wear are discussed.

Copolyesters from Soybean Oil for Use as Resorbable Biomaterials

A family of soybean oil (SO) based biodegradable cross-linked copolyesters sourced from renewable resources was developed for use as resorbable biomaterials. The polyesters were prepared by a melt condensation of epoxidized soybean oil polyol and sebacic acid with citric acid (CA) as a cross-linker. D-Mannitol (M) was added as an additional reactant to improve mechanical properties. Differential scanning calorimetry revealed that the polyester synthesized using only CA as the cross-linker was semicrystalline and elastomeric at physiological temperature. The polymers were hydrophobic in nature. The water wettability, elongation at break and the degradation rate of the polyesters decreased with increase in M content or curing time. Modeling of release kinetics of dyes showed a diffusion controlled mechanism underlies the observed sustained release from these polymers. The polyesters supported attachment and proliferation of human stem cells and were thus cytocompatible. Porous scaffolds induced osteogenic differentiation of the stern cells suggesting that these polymers are well suited for bone tissue engineering. Thus, this family of polyesters offers a low cost and green alternative as biocompatible, bioresobable polymers for potential use as resorbable biomaterials for tissue engineering and controlled release.

Improved method makes a soft landing of well path

Research and field experience have shown that well-path control is important in many cases, not only to reach the desired coordinates, but also to arrive at the well completion target from the preferred trajectory.

Numerical approximation improves well survey calculation

It is now possible to improve the precision of well survey calculations by order of magnitude with numerical approximation.

Although the most precise method of simulating and calculating a wellbore trajectory generally requires more calculation than other, less-accurate methods, the wider use of computers in oil fields now eliminates this as an obstacle.

The results of various calculations show that there is a deviation of more than 10 m among the different methods of calculation for a directional well of 3,000 m.¹ Consequently, it is important to improve the precision and reliability of survey calculation-the fundamental, necessary work of quantitatively monitoring and controlling wellbore trajectories.

Experiments on interaction between current-induced vibration and scour of submarine pipelines on sandy bottom

In order to understand the dynamic behavior of submarine pipelines exposed to current and the mechanism of the interaction between current-induced vibration and scour of pipelines on a sandy bottom, an experimental investigation is conducted with a small scale model A test model which can be tested in the flume is set up by taking into account the typical working conditions of the pipelines and by applying the similarity theory. The interactions between the shape of the scour hole and the behavior of the pipeline as well as the flow patterns of the current are detailed, and the interaction mechanism outlined. The effect of vibration of the pipeline on the development of dynamic scour at different stages is found out. The proposed experimental method and test results provide an effective means for design of marine pipelines against scouring.

Avaliação do possível impacto das técnicas de MEOR (Microbial Enhanced Oil Recovery) no fator de recuperação das reservas de petróleo e gás do Brasil

Os métodos tradicionais de estimular a produção de petróleo, envolvendo a injeção de água, vapor, gás ou outros produtos, estabeleceram a base conceitual para novos métodos de extração de óleo, utilizando micro-organismos e processos biológicos. As tecnologias que empregam os processos de bioestimulação e bioaumentação já são amplamente utilizadas em inúmeras aplicações industriais, farmacêuticas e agroindustriais, e mais recentemente, na indústria do petróleo. Dada a enorme dimensão econômica da indústria do petróleo, qualquer tecnologia que possa aumentar a produção ou o fator de recuperação de um campo petrolífero gera a expectativa de grandes benefícios técnicos, econômicos e estratégicos. Buscando avaliar o possível impacto de MEOR (microbial enhanced oil recovery) no fator de recuperação das reservas de óleo e gás no Brasil, e quais técnicas poderiam ser mais indicadas, foi feito um amplo estudo dessas técnicas e de diversos aspectos da geologia no Brasil. Também foram realizados estudos preliminares de uma técnica de MEOR (bioacidificação) com possível aplicabilidade em reservatórios brasileiros. Os resultados demonstram que as técnicas de MEOR podem ser eficazes na produção, solubilização, emulsificação ou transformação de diversos compostos, e que podem promover outros efeitos físicos no óleo ou na matriz da rocha reservatório. Também foram identificadas bacias petrolíferas brasileiras e recursos não convencionais com maior potencial para utilização de determinadas técnicas de MEOR. Finalmente, foram identificadas algumas técnicas de MEOR que merecem maiores estudos, entre as técnicas mais consolidadas (como a produção de biossurfatantes e biopolímeros, e o controle da biocorrosão), e as que ainda não foram completamente viabilizadas (como a gaseificação de carvão, óleo e matéria orgânica; a dissociação microbiana de hidratos de gás; a bioconversão de CO2 em metano; e a bioacidificação). Apesar de seu potencial ainda não ser amplamente reconhecido, as técnicas de MEOR representam o limiar de uma nova era na estimulação da produção de recursos petrolíferos existentes, e até mesmo para os planos de desenvolvimento de novas áreas petrolíferas e recursos energéticos. Este trabalho fornece o embasamento técnico para sugerir novas iniciativas, reconhecer o potencial estratégico de MEOR, e para ajudar a realizar seu pleno potencial e seus benefícios.

Travel Characteristics of Marine Anglers Using Oil and Gas Platforms in the Central Gulf of Mexico

This study was designed to evaluate the travel characteristics of avid marine anglers off Louisiana in the Central Gulf of Mexico. It focuses on the complex marine travel patterns involving the extensive assemblage of oil and gas structures. In an intercept approach, marine recreationalf isherman were asked to identify near and offshore travel patterns on the day of the interview. Information was also solicited regarding how respondents selected and located fishing destinations as well as what method of fishing was undertaken that day. Petroleum platforms were a principal fishing destination, and platform anglers traveled an average distance of 75.5 km (40.7 n.mi.) to and from offshore fishing locations. In fishing an average of 6.5 platforms per trip, these anglers traveled about 21.3 km (11.5 n.mi.) between the first and last platform visited. Mean total distances for platform anglers were 96 km (51.8 n.mi). Travel distances for bay, nearshore, and bluewater anglers were also obtained.

Navegar é preciso, educar também é preciso: as contradições teórico-metodológicas do Projeto de Educação Ambiental dos Trabalhadores (PEAT), no âmbito do licenciamento ambiental para atividades de E&P offshore.

O presente estudo traz para discussão as ações educativas destinadas aos trabalhadores, no âmbito do licenciamento ambiental das atividades de perfuração e exploração de petróleo e gás offshore - à luz dos referenciais teórico metodológicos de uma Educação Ambiental (EA) crítica. Muito embora as pesquisas em EA no Brasil tenham alcançado um elevado grau de maturidade, produzindo reflexões profícuas e embasando a elaboração tanto de diretrizes quanto instruções normativas; ainda hoje, importantes eixos de atuação e públicos de interesse específicos - a exemplo de trabalhadores alocados em unidades de perfuração, produção e embarcações de apoio - carecem de uma reflexão aprofundada que questione tanto o substrato epistemológico empregado quanto o tipo de práxis educativa que vem sendo construída. Neste sentido o estudo analisa o Projeto de Educação Ambiental dos Trabalhadores (PEAT) elaborado por duas grandes empresas de consultoria, sediadas no Rio de Janeiro, com o objetivo de avaliar em que medida seus projetos pedagógicos incorporam os princípios da EA instituídos pela Política Nacional de Educação Ambiental. Ademais são observados os pontos críticos (contradições) para a operacionalização do Projeto e o embate entre discursos antagônicos, que buscam a hegemonia material e simbólica do campo da EA, tomando por base a análise de discurso a partir de entrevistas realizadas com os principais atores envolvidos na elaboração do PEAT: empreendedor-consultoria-órgão ambiental. Como resultado observamos: (i) uma deficiência (por parte das consultorias) em incorporar os fundamentos teóricos da EA ao PEAT submetido para aprovação do órgão ambiental licenciador; (ii) uma inadequação das concepções metodológicas do PEAT, com consequentes advertências por parte do órgão ambiental e (iii) o engendramento de uma situação de incoerência na qual o órgão ambiental licenciador aprova um documento escrito (PEAT submetido) e desaprova as práticas educativas por este desencadeadas.

Gerenciamento de resíduos sólidos nas atividades de exploração offshore de óleo e gás.

Apesar da relevância econômica, a atividade de Exploração e Produção (E&P) é considerada potencialmente causadora de impactos ambientais, dentre estes destaca-se a geração de resíduos sólidos. Neste cenário, estão sendo criados uma série de regulamentações e acordos internacionais cada vez mais restritivos pertinentes a esta temática, dentre estes a Nota Técnica CGPEG/DILIC/IBAMA n 01/11, que estabelece a implementação do Projeto de Controle da Poluição (PCP). Além de marcos regulatórios cada vez mais rígidos, o gerenciamento de resíduos é fundamental para a minimização de impactos ambientais, pois se o mesmo não for realizado de maneira eficiente, pode gerar custos e problemas ambientais e a imagem da empresa pode ficar comprometida através de passivos ambientais. Sendo assim, o presente trabalho visa analisar o processo de Gerenciamento de Resíduos Sólidos gerados em instalações marítimas de perfuração de poços de petróleo, bem como a adequação deste processo à legislação vigente de modo a identificar os principais entraves para a minimização dos efeitos ambientais provocados pela atividade. O estabelecimento de um marco regulatório para controle da poluição dessa atividade definiu novas diretrizes, que levarão a redução dos quantitativos gerados, bem como a adoção de melhores formas para tratamento e disposição dos resíduos. Contudo, o crescimento das atividades de exploração de petróleo deverá ser acompanhado também do desenvolvimento e ampliação do mercado nacional voltado ao transporte, tratamento e disposição final de resíduos, de forma a reduzir ao máximo o impacto ambiental causado por estas atividades.

Nova metodologia para caracterização litológica das rochas carbonáticas do pré-sal com base na perfilagem e espectroscopia de poço

O cenário mundial de crescimento está favorecendo uma demanda cada vez maior por petróleo e gás. Para se adequar a esta demanda crescente, as companhias petroleiras têm perfurado em regiões de águas profundas e com caráter geológico particular, como os depósitos carbonáticos recém explorados no Brasil pela Petrobras e que entraram em produção a partir de 2008. Para a produção de hidrocarbonetos é preciso um conhecimento profundo das rochas que os contém. Isto se deve ao fato que os sensores usados para detectar hidrocarbonetos no processo conhecido como perfilagem de poço na indústria petroleira são influenciados em suas medições pelas características das rochas. No caso deste trabalho, carbonatos do pré-sal, aparece uma complicação adicional em termos litológicos que é a presença do mineral Estevensita que não é comumente encontrado em ambientes carbonáticos. Em função de não haver uma forma de detectar sem ambiguidades o mineral Estevensita (rico em magnésio) com a Dolomita (também rica em magnésio), e levando-se em consideração o fato de que a Estevensita fecha os poros da rocha (rocha não reservatório) enquanto a Dolomita normalmente pode ser uma excelente rocha reservatório é de fundamental importância conhecer se o magnésio é proveniente da Estevensita ou do processo de dolomitização do carbonato (substituição de cálcio por magnésio). Não existe hoje em dia uma metodologia de perfilagem de poço que possa indicar a proveniência do magnésio. Estevensita ou Dolomita? Rocha reservatório ou não-reservatório? O objetivo deste trabalho é prover respostas às perguntas acima. Desenvolver uma forma de analisar os minerais presentes no pré-sal através da perfilagem e espectroscopia de poço e fazer a separação entre os diversos constituintes das rochas encontradas no pré-sal. O pré-sal brasileiro é constituído por litologia carbonática complexa, sendo a seção rifte formada por coquinas e a seção sag por microbialitos. Estas rochas foram depositadas antes da deposição da camada de sal no fim do Aptiano. Para atingir o resultado esperado neste trabalho serão utilizadas medições convencionais e não convencionais no laboratório com rochas análogas ao pré-sal e minerais puros tais como a Estevensita a fim de determinar respostas padrão para serem utilizados em programas de análise de registros de perfilagem. O produto final deste trabalho é desenvolver um procedimento para determinação de litologia no pré-sal brasileiro através de registros a cabo (wireline) ou enquanto se perfura (Logging While Drilling - LWD)

Prioritizing county-level well-being: Moving toward assessment of Gulf Coast counties impacted by the Deepwater Horizon Industrial Disaster

To develop a portfolio of indicators and measures that could best measure changes in the social, economic, environmental and health dimensions of well-being in coastal counties we convened a group of experts March 8-9, 2011 in Charleston, SC, U.S.A. The region of interest was of the northern Gulf of Mexico, specifically, those coastal counties most impacted during the explosion and subsequent oil spill from the Macondo Prospect wellhead during the summer of 2010. Over the course of the two-day workshop participants moved through presentations and facilitated sessions to identify and prioritize potential indicators and measures deemed most valuable for capturing changes in well-being related to changes in or disruption of ecosystem services. The experts reached consensus on a list of indicators that are now being operationalized by NOAA researchers. The ultimate goal of this research project is to determine whether a meaningful set of social and economic indicators can be developed to document changes in well-being that occur as a result of changes in ecosystem services. The outcomes and outputs from the workshop that is the subject of this report helped us to identify high-quality indicators useful for measuring well-being.

Monitoring well-being and changing environmental conditions in coastal communities: development of an assessment method

The intersection of social and environmental forces is complex in coastal communities. The well-being of a coastal community is caught up in the health of its environment, the stability of its economy, the provision of services to its residents, and a multitude of other factors. With this in mind, the project investigators sought to develop an approach that would enable researchers to measure these social and environmental interactions. The concept of well-being proved extremely useful for this purpose. Using the Gulf of Mexico as a regional case study, the research team developed a set of composite indicators to be used for monitoring well-being at the county-level. The indicators selected for the study were: Social Connectedness, Economic Security, Basic Needs, Health, Access to Social Services, Education, Safety, Governance, and Environmental Condition. For each of the 37 sample counties included in the study region, investigators collected and consolidated existing, secondary data representing multiple aspects of objective well-being. To conduct a longitudinal assessment of changing wellbeing and environmental conditions, data were collected for the period of 2000 to 2010. The team focused on the Gulf of Mexico because the development of a baseline of well-being would allow NOAA and other agencies to better understand progress made toward recovery in communities affected by the Deepwater Horizon oil spill. However, the broader purpose of the project was to conceptualize and develop an approach that could be adapted to monitor how coastal communities are doing in relation to a variety of ecosystem disruptions and associated interventions across all coastal regions in the U.S. and its Territories. The method and models developed provide substantial insight into the structure and significance of relationships between community well-being and environmental conditions. Further, this project has laid the groundwork for future investigation, providing a clear path forward for integrated monitoring of our nation’s coasts. The research and monitoring capability described in this document will substantially help counties, local organizations, as well state and federal agencies that are striving to improve all facets of community well-being.