881 resultados para Low Speed Switched Reluctance Machine


Relevância:

100.00% 100.00%

Publicador:

Resumo:

First, recent studies on the information preservation (IP) method, a particle approach for low-speed micro-scale gas flows, are reviewed. The IP method was validated for benchmark issues such as Couette, Poiseuille and Rayleigh flows, compared well with measured data for typical internal flows through micro-channels and external flows past micro flat plates, and combined with the Navier-Stokes equations to be a hybrid scheme for subsonic, rarefied gas flows. Second, the focus is moved to the microscopic characteristic of China stock market, particularly the price correlation between stock deals. A very interesting phenomenon was found that showed a reverse transition behaviour between two neighbouring price changes. This behaviour significantly differs from the transition rules for atomic and molecular energy levels, and it is very helpful to understand the essential difference between stock markets and nature.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The chloroplasts, mitochondria, and protoplasm devoid of mature chloroplasts (PMC) of Bryopsis hypnoides Lamouroux were isolated by low-speed and sucrose density centrifugation. The PMC aggregated in artificial seawater, and then protoplasts without mature chloroplasts (PtMCs) were formed. Transmission electron microscopy and cytochemical studies indicated that there were mitochondria, nuclei, vesicles, and other small cell organelles in the PtMCs. Scanning electron microscopy showed that there were holes on the surface of 1-h PtMCs and then fewer holes on the surface of 24-h PtMCs, suggesting that a healing process occurred. The plasma membrane was formed over the surface of the PtMCs. However, the cell wall was not regenerated, and the newly formed PtMCs were ruptured and died in 3 days. Light intensity during alga maintenance before use influenced significantly (one-way ANOVA, P < 0.0001) on the number of PtMCs formed; the highest number of PtMCs was formed at 20A mu mol/(m(2) s). When isolated chloroplasts were transferred into seawater, there were only two or three chloroplasts aggregated together. However, isolated mitochondria and the mixed six layers of cell organelles (separated by sucrose density centrifugation) could not aggregate in the artificial seawater. This indicates that the conjunction of cell organelles is important for their aggregation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

本文在分析几种常用的基于编码器测速方法的基础上,提出了一种高性能的自适应速度测量方法。该方法选择一个可变的时间周期和编码器脉冲数来测量单位时间内的编码器脉冲数,再通过简单的计算得到转速的测量值。数字信号处理器(DSP)芯片集成有正交脉冲编码电路,并且数据处理速度快,实时性强。本文中提出的方法在电机控制专用DSP芯片TMS320 LF2407A上进行了实现。实验研究表明,可以在提高低速时的测速准确度的同时,提高系统的响应时间。该方法已经在自主研发的全数字伺服驱动系统中得到了成功应用。

Relevância:

100.00% 100.00%

Publicador:

Resumo:

浮体在自由表面上的拖曳是一种常见的拖曳形式,由于自由表面上物体的运动情况相当复杂,目前对这种拖曳系统的设计和分析一般采用试验的方法。通过理论分析,对球形浮体在自由表面上的匀速直线拖曳运动建立了数学模型,其中对缆绳的分析采用Ablow-Schechter提出的有限差分模型,对球形浮体的分析采用水动力系数法,整个耦合系统用有限差分方法求解。之后,在拖曳水池进行了试验,试验结果表明,这种方法在拖曳速度比较低的情况下能够模拟真实情况,可以用来指导拖曳系统设计。

Relevância:

100.00% 100.00%

Publicador:

Resumo:

汉字微机数据库的最大缺点是速度太慢,因此难以实用化。本文提出了一种新的汉字检索方法——标志域法,解决了这个关键问题,使查找速度提高了近十倍;再采用单层连续提问等一系列措施,还可节省相当多的存储空间,扩大了微型机的应用范围。本数据库非常适合于“最终用户”使用,即使是不懂计算机的人,也能在一、两分钟内学会使用它。

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The generation and near-field radiation of aerodynamic sound from a low-speed unsteady flow over a two-dimensional automobile door cavity is simulated by using a source-extraction-based coupling method. In the coupling procedure, the unsteady cavity flow field is first computed solving the Reynolds averaged Navier–Stokes (RANS) equations. The radiated sound is then calculated by using a set of acoustic perturbation equations with acoustic source terms which are extracted from the time-dependent solutions of the unsteady flow. The aerodynamic and its resulting acoustic field are computed for the Reynolds number of 53,266 based on the base length of the cavity. The free stream flow velocity is taken to be 50.9m/s. As first stage of the numerical investigation of flow-induced cavity noise, laminar flow is assumed. The CFD solver is based on a cell-centered finite volume method. A dispersion-relation-preserving (DRP), optimized, fourth-order finite difference scheme with fully staggered-grid implementation is used in the acoustic solver

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Le diabète insipide néphrogénique (DIN) autosomal peut être causé par les mutations du gène codant pour le canal à eau aquaporine-2 (AQP2). Un modèle couramment utilisé pour l’étude des protéines membranaires telle l’AQP2 est l’expression hétérologue dans les ovocytes de Xenopus laevis. Malheureusement, les techniques déjà existantes de purification de membranes plasmiques sont soit trop longues, trop difficiles ou demandent trop de matériel, ne permettent pas l’analyse adéquate du ciblage des formes sauvage comme mutantes, un élément crucial de ce type d’étude. Nous avons donc dans un premier temps mis au point une technique rapide et efficace de purification de membranes plasmiques qui combine la digestion partielle de la membrane vitelline, sa polymérisation à la membrane plasmique suivi de centrifugations à basse vitesse pour récolter les membranes purifiées. Nous avons utilisé cette technique dans l’étude de deux nouveaux cas familiaux de patients hétérozygotes possédant les mutations V24A et R187C dans un cas et K228E et R187C dans le second cas. Pour chaque mutation, nous avons analysé autant les éléments de fonctionnalité que les paramètres d’expression des protéines mutantes. Les expériences de perméabilité membranaire démontrent que les ovocytes exprimant AQP2-V24A (Pf = 16.3 ± 3.5 x 10-4 cm/s, 10 ng) et AQP2- K228E (Pf = 19.9 ± 7.0 x 10-4 cm/s, 10 ng) ont des activités similaires à celle exprimant la forme native (Pf = 14.4 ± 5.5 x 10-4 cm/s, 1 ng), tandis que AQP2- R187C (Pf = 2.6 ± 0.6 x 10-4 cm/s, 10 ng) ne semble avoir aucune activité comme ce qui est observé chez les ovocytes non-injectés (Pf = 2.8 ± 1.0 x 10-4 cm/s). Les études de co-expression ont démontré un effet d’additivité lorsque AQP2-V24A et -K228E sont injectées avec la forme native et un effet s’apparentant à la dominance négative lorsque AQP2-R187C est injecté avec la forme native, avec AQP2-V24A ou avec –K228E. Les résultats obtenus par immunobuvardage représente bien ce qui a été démontré précédemment, on remarque la présence des mutations K228E, V24A et la forme sauvage à la membrane plasmique, contrairement à la mutation R187C. Cependant, lorsque les mutations sont exprimées dans des cellules mIMCD-3, il n’y a qu’une faible expression à la membrane de la forme –K228E et une absence totale des formes –V24A et –R187C à la membrane plasmique, contrairement à la forme native. Les résultats de nos études démontrent que tout dépendant du système d’expression les formes –K228E et –V24A peuvent être utiles dans l’étude des problèmes d’adressage à la membrane à l’aide de chaperonne chimique. De plus, la forme –R187C démontre des difficultés d’adressage qui devront être étudiées afin de mieux comprendre la synthèse des formes natives.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Avec les nouvelles technologies des réseaux optiques, une quantité de données de plus en plus grande peut être transportée par une seule longueur d'onde. Cette quantité peut atteindre jusqu’à 40 gigabits par seconde (Gbps). Les flots de données individuels quant à eux demandent beaucoup moins de bande passante. Le groupage de trafic est une technique qui permet l'utilisation efficace de la bande passante offerte par une longueur d'onde. Elle consiste à assembler plusieurs flots de données de bas débit en une seule entité de données qui peut être transporté sur une longueur d'onde. La technique demultiplexage en longueurs d'onde (Wavelength Division Multiplexing WDM) permet de transporter plusieurs longueurs d'onde sur une même fibre. L'utilisation des deux techniques : WDM et groupage de trafic, permet de transporter une quantité de données de l'ordre de terabits par seconde (Tbps) sur une même fibre optique. La protection du trafic dans les réseaux optiques devient alors une opération très vitale pour ces réseaux, puisqu'une seule panne peut perturber des milliers d'utilisateurs et engendre des pertes importantes jusqu'à plusieurs millions de dollars à l'opérateur et aux utilisateurs du réseau. La technique de protection consiste à réserver une capacité supplémentaire pour acheminer le trafic en cas de panne dans le réseau. Cette thèse porte sur l'étude des techniques de groupage et de protection du trafic en utilisant les p-cycles dans les réseaux optiques dans un contexte de trafic dynamique. La majorité des travaux existants considère un trafic statique où l'état du réseau ainsi que le trafic sont donnés au début et ne changent pas. En plus, la majorité de ces travaux utilise des heuristiques ou des méthodes ayant de la difficulté à résoudre des instances de grande taille. Dans le contexte de trafic dynamique, deux difficultés majeures s'ajoutent aux problèmes étudiés, à cause du changement continuel du trafic dans le réseau. La première est due au fait que la solution proposée à la période précédente, même si elle est optimisée, n'est plus nécessairement optimisée ou optimale pour la période courante, une nouvelle optimisation de la solution au problème est alors nécessaire. La deuxième difficulté est due au fait que la résolution du problème pour une période donnée est différente de sa résolution pour la période initiale à cause des connexions en cours dans le réseau qui ne doivent pas être trop dérangées à chaque période de temps. L'étude faite sur la technique de groupage de trafic dans un contexte de trafic dynamique consiste à proposer différents scénarios pour composer avec ce type de trafic, avec comme objectif la maximisation de la bande passante des connexions acceptées à chaque période de temps. Des formulations mathématiques des différents scénarios considérés pour le problème de groupage sont proposées. Les travaux que nous avons réalisés sur le problème de la protection considèrent deux types de p-cycles, ceux protégeant les liens (p-cycles de base) et les FIPP p-cycles (p-cycles protégeant les chemins). Ces travaux ont consisté d’abord en la proposition de différents scénarios pour gérer les p-cycles de protection dans un contexte de trafic dynamique. Ensuite, une étude sur la stabilité des p-cycles dans un contexte de trafic dynamique a été faite. Des formulations de différents scénarios ont été proposées et les méthodes de résolution utilisées permettent d’aborder des problèmes de plus grande taille que ceux présentés dans la littérature. Nous nous appuyons sur la méthode de génération de colonnes pour énumérer implicitement les cycles les plus prometteurs. Dans l'étude des p-cycles protégeant les chemins ou FIPP p-cycles, nous avons proposé des formulations pour le problème maître et le problème auxiliaire. Nous avons utilisé une méthode de décomposition hiérarchique du problème qui nous permet d'obtenir de meilleurs résultats dans un temps raisonnable. Comme pour les p-cycles de base, nous avons étudié la stabilité des FIPP p-cycles dans un contexte de trafic dynamique. Les travaux montrent que dépendamment du critère d'optimisation, les p-cycles de base (protégeant les liens) et les FIPP p-cycles (protégeant les chemins) peuvent être très stables.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this thesis was to quantify the physiological responses such as O2 uptake (VO2), heart rate (HR) and blood lactate ([LA]) to some types of activities associated with intermittent sports in athletes. Our hypothesis is that the introduction of accelerations and decelerations with or without directional changes results in a significative increase of the oxygen consumption, heart rate and blood lactate. The purpose of the first study was to measure and compare the VO2 and the HR of 6 on-court tennis drills at both high and low displacement speeds. These drills were done with and without striking the ball, over full and half-width court, in attack or in defense mode, using backhand or forehand strokes. Results show that playing an attacking style requires 6.5% more energy than playing a defensive style (p < 0.01) and the backhand stroke required 7% more VO2 at low speed than forehand stroke (p < 0.05) while the additional cost of striking the ball lies between 3.5 and 3.0 mL kg-1 min-1. Finally, while striking the ball, the energy expanded during a shuttle displacement on half-width court is 14% higher than running on full-width court. Studies #2 and #3 focused on different modes of displacement observed in irregular sports. The objective of the second study was to measure and compare VO2, HR and [LA] responses to randomly performed multiple fractioned runs with directional changes (SR) and without directional changes (FR) to those of in-line running (IR) at speeds corresponding to 60, 70 and 80% of the subject’s maximal aerobic speed (MAS). All results show that IR’s VO2 was significantly lower than SR’s and FR’s (p<0.05). SR’s VO2 was greater than FR’s only at speeds corresponding to 80%MAS. On the other hand, HR was similar in SR and FR but significantly higher than IR’s (p<0.05). [LA] varied between 4.2 ± 0.8 and 6.6 ± 0.9 mmol L-1 without significant differences between the 3 displacement modes. Finally, the third study’s objective was to measure and compare VO2 , HR and [LA] responses during directional changes at different angles and at different submaximal running speeds corresponding to 60, 70 and 80% MAS. Subjects randomly performed 4 running protocols 1) a 20-m shuttle running course (180°) (SR), 2) an 8-shaped running course with 90-degree turns every 20 m (90R), 3) a Zigzag running course (ZZR) with multiple close directional changes (~ 5 m) at different angle values of 91.8°, 90° and 38.6°, 4) an In-line run (IR) for comparison purposes. Results show that IR’s was lower (p<0.001) than for 90R’s, SR’s and ZZR’s at all intensities. VO2 obtained at 60 and 70%MAS was 48.7 and 38.1% higher during ZZR when compared to IR while and depending on the intensity, during 90R and SR was between 15.5 and 19.6% higher than during IR. Also, ZZR’s VO2 was 26.1 and 19.5% higher than 90R’s, 26.1 and 15.5% higher than SR’s at 60 and 70%MAS. SR’s and 90R’s VO2 were similar. Changing direction at a 90° angle and at 180° angle seem similar when compared to continuous in-line running. [LA] levels were similar in all modalities. Overall, the studies presented in this thesis allow the quantification of the specific energetic demands of certain types of displacement modes in comparison with conventional forward running. Also, our results confirm that the energy cost varies and increase with the introduction of accelerations and decelerations with and without directional changes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis in Thermal Flow Drilling and Flowtap in thin metal sheet and pipes of copper and copper alloys had as objectives to know the comportment of copper and copper alloys sheet metal during the Thermal Flow Drill processes with normal tools, to know the best Speed and Feed machine data for the best bushing quality, to known the best Speed for Form Tapping processes and to know the best bush long in pure copper pipes for water solar interchange equipment. Thermal Flow Drilling (TFD) and Form Tapping (FT) is one of the research lines of the Institute of Production and Logistics (IPL) at University of Kassel. At December 1995, a work meeting of IPL, Santa Catarina University, Brazil, Buenos Aires University, Argentine, Tarapacá University (UTA), Chile members and the CEO of Flowdrill B.V. was held in Brazil. The group decided that the Manufacturing Laboratory (ML) of UTA would work with pure copper and brass alloys sheet metal and pure copper pipes in order to develop a water interchange solar heater. The Flowdrill BV Company sent tools to Tarapacá University in 1996. In 1999 IPL and the ML carried out an ALECHILE research project promoted by the DAAD and CONICyT in copper sheet metal and copper pipes and sheet metal a-brass alloys. The normal tools are lobed, conical tungsten carbide tool. When rotated at high speed and pressed with high axial force into sheet metal or thin walled tube generated heat softens the metal and allows the drill to feed forward produce a hole and simultaneously form a bushing from the displacement material. In the market exist many features but in this thesis is used short and longs normal tools of TFD. For reach the objectives it was takes as references four qualities of the frayed end bushing, where the best one is the quality class I. It was used pure copper and a-brass alloys sheet metals, with different thickness. It was used different TFD drills diameter for four thread type, from M-5 to M10. Similar to the Aluminium sheet metals studies it was used the predrilling processes with HSS drills around 30% of the TFD diameter (1,5 – 3,0 mm D). In the next step is used only 2,0 mm thick metal sheet, and 9,2 mm TFD diameter for M-10 thread. For the case of pure commercial copper pipes is used for ¾” inch diameter and 12, 8 mm (3/8”) TFD drill for holes for 3/8” pipes and different normal HSS drills for predrilling processes. The chemical sheet metal characteristics were takes as reference for the material behaviour. The Chilean pure copper have 99,35% of Cu and 0,163% of Zinc and the Chilean a-brass alloys have 75,6% of Cu and 24,0% of Zinc. It is used two German a-brass alloys; Nº1 have 61,6% of Cu, 36,03 % of Zinc and 2,2% of Pb and the German a-brass alloys Nº2 have 63,1% of Cu, 36,7% of Zinc and 0% of Pb. The equipments used were a HAAS CNC milling machine centre, a Kistler dynamometer, PC Pentium II, Acquisition card, TESTPOINT and XAct software, 3D measurement machine, micro hardness, universal test machine, and metallographic microscope. During the test is obtained the feed force and momentum curves that shows the material behaviour with TFD processes. In general it is take three phases. It was possible obtain the best machining data for the different sheet of copper and a-brass alloys thick of Chilean materials and bush quality class I. In the case of a-brass alloys, the chemical components and the TFD processes temperature have big influence. The temperature reach to 400º Celsius during the TFD processes and the a-brass alloys have some percents of Zinc the bush quality is class I. But when the a-brass alloys have some percents of Lead who have 200º C melting point is not possible to obtain a bush, because the Lead gasify and the metallographic net broke. During the TFD processes the recrystallization structures occur around the Copper and a-brass alloy bush, who gives more hardness in these zones. When the threads were produce with Form Tapping processes with Flowtap tools, this hardness amount gives a high limit load of the thread when hey are tested in a special support that was developed for it. For eliminated the predrilling processes with normal HSS drills it was developed a compound tool. With this new tool it was possible obtain the best machining data for quality class I bush. For the copper pipes it is made bush without predrilling and the quality class IV was obtained. When it is was used predrilling processes, quality classes I bush were obtained. Then with different HSS drill diameter were obtained different long bush, where were soldering with four types soldering materials between pipes with 3/8” in a big one as ¾”. Those soldering unions were tested by traction test and all the 3/8” pipes broken, and the soldering zone doesn’t have any problem. Finally were developed different solar water interchange heaters and tested. As conclusions, the present Thesis shows that the Thermal Flow Drilling in thinner metal sheets of cooper and cooper alloys needs a predrilling process for frayed end quality class I bushings, similar to thinner sheets of aluminium bushes. The compound tool developed could obtain quality class I bushings and excludes predrilling processes. The bush recrystalization, product of the friction between the tool and the material, the hardness grows and it is advantageous for the Form Tapping. The methodology developed for commercial copper pipes permits to built water solar interchange heaters.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This report describes development of micro-fabricated piezoelectric ultrasonic motors and bulk-ceramic piezoelectric ultrasonic motors. Ultrasonic motors offer the advantage of low speed, high torque operation without the need for gears. They can be made compact and lightweight and provide a holding torque in the absence of applied power, due to the traveling wave frictional coupling mechanism between the rotor and the stator. This report covers modeling, simulation, fabrication and testing of ultrasonic motors. Design of experiments methods were also utilized to find optimal motor parameters. A suite of 8 mm diameter x 3 mm tall motors were machined for these studies and maximum stall torques as large as 10^(- 3) Nm, maximum no-load speeds of 1710 rpm and peak power outputs of 27 mW were realized. Aditionally, this report describes the implementation of a microfabricated ultrasonic motor using thin-film lead zirconate titanate. In a joint project with the Pennsylvania State University Materials Research Laboratory and MIT Lincoln Laboratory, 2 mm and 5 mm diameter stator structures were fabricated on 1 micron thick silicon nitride membranes. Small glass lenses placed down on top spun at 100-300 rpm with 4 V excitation at 90 kHz. The large power densities and stall torques of these piezoelectric ultrasonic motors offer tremendous promis for integrated machines: complete intelligent, electro-mechanical autonomous systems mass-produced in a single fabrication process.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this article, a new technique for grooming low-speed traffic demands into high-speed optical routes is proposed. This enhancement allows a transparent wavelength-routing switch (WRS) to aggregate traffic en route over existing optical routes without incurring expensive optical-electrical-optical (OEO) conversions. This implies that: a) an optical route may be considered as having more than one ingress node (all inline) and, b) traffic demands can partially use optical routes to reach their destination. The proposed optical routes are named "lighttours" since the traffic originating from different sources can be forwarded together in a single optical route, i.e., as taking a "tour" over different sources towards the same destination. The possibility of creating lighttours is the consequence of a novel WRS architecture proposed in this article, named "enhanced grooming" (G+). The ability to groom more traffic in the middle of a lighttour is achieved with the support of a simple optical device named lambda-monitor (previously introduced in the RingO project). In this article, we present the new WRS architecture and its advantages. To compare the advantages of lighttours with respect to classical lightpaths, an integer linear programming (ILP) model is proposed for the well-known multilayer problem: traffic grooming, routing and wavelength assignment The ILP model may be used for several objectives. However, this article focuses on two objectives: maximizing the network throughput, and minimizing the number of optical-electro-optical conversions used. Experiments show that G+ can route all the traffic using only half of the total OEO conversions needed by classical grooming. An heuristic is also proposed, aiming at achieving near optimal results in polynomial time

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Polar spacecraft passed through a region near the dayside magnetopause on May 29, 1996, at a geocentric distance of similar to 8 R-E and high, northern magnetic latitudes. The interplanetary magnetic field (IMF) was northward during the pass. Data from the Thermal Ion Dynamics Experiment revealed the existence of low-speed (similar to 50 km s(-1)) ion D-shaped distributions mixed with cold ions (similar to 2 eV) over a period of 2.5 hours. These ions were traveling parallel to the magnetic field toward the Northern Hemisphere ionosphere and were convecting primarily eastward. The D-shaped distributions are distinct from a convecting Maxwellian and, along with the magnetic field direction, are taken as evidence that the spacecraft was inside the magnetosphere and not in the magnetosheath. Furthermore, the absence of ions in the antiparallel direction is taken as evidence that low-shear merging was occurring at a location southward of the spacecraft and equatorward of the Southern Hemisphere cusp. The cold ions were of ionospheric origin, with initially slow field-aligned speeds, which were accelerated upon reflection from the magnetopause. These observations provide significant new evidence consistent with component magnetic merging sites equatorward of the cusp for northward IMF.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work presents a spray-dryer designed to oxalate-niobate precursors and suitable for the production of Niobium Carbide. The dryer was intended to produce powders of controlled particle size. First, the precursor is dissolved in water to produce a solution of known concentration and then it is atomized on the spray-dryer to produce the powder. This equipment consists of a 304 stainless steel chamber, 0.48 m x 1.9 m (diameter x length), with a conical shape at the lower portion, which is assembled on a vertical platform. The chamber is heated by three 4 kW electrical resistances. In this process, drying air is heated as it flows inside a serpentine surrounding the chamber, in contrary to more traditional processes in which the hot drying air is used to heat the component. The air enters the chamber at the same temperature of the chamber, thus avoiding adherence of particles on the internal surface. The low speed flow is concurrent, directed from the top to the bottom portion of the chamber. Powders are deposited on a 0.4 m diameter tray, which separates the cylindrical portion from the conical portion of the chamber. The humid air is discharged though a plug placed underneath the collecting tray. A factorial experimental planning was prepared to study the influence of five parameters (concentration, input flow, operation temperature, drying air flow and spray air flow) on the characteristics of the powders produced. Particle size distribution and shape were measured by laser granulometry and scanning electronic microscopy. Then, the powders are submitted to reaction in a CH4 / H2 atmosphere to compare the characteristics of spray-dried powders with powders synthetizided by conventional methods

Relevância:

100.00% 100.00%

Publicador:

Resumo:

One of the important factors accounting for successful delayed replantation of avulsed teeth is seemingly the type of root surface treatment. Removal of necrotic cemental periodontal ligament remnants may prevent the occurrence of external root resorption, which is the major cause of loss of teeth replanted in such conditions. The purpose of this study was to compare the efficacy of two mechanical techniques for removal of root-adhered periodontal ligament. Preservation or removal of the cementum layer concomitantly with these procedures was also assessed. Forty-five roots of healthy premolars extracted for orthodontic purposes were selected. After extraction, the teeth were kept dry at room temperature for 1 h and then immersed in saline for rehydration for an additional 10 min. Thereafter, the roots were assigned to three groups, as follows: group 1 (control) - the cemental periodontal ligament was preserved; group 2 - removal of the periodontal ligament by scraping root surface with a scalpel blade (SBS); group 3 - periodontal ligament remnants were removed using a Robinson bristle brush at low-speed with pumice/water slurry (RBP). The specimens were analysed histomorphometrically and examined by scanning electron microscopy. The quantitative and qualitative analyses of the results showed that the RBP technique was significantly more effective than the SBS technique for removal of the periodontal ligament remnants adhered to root surface. Both techniques preserved the cementum layer.