Development of an online condition monitoring system for slow speed machinery

One of the main challenges of slow speed machinery condition monitoring is that the energy generated from an incipient defect is too weak to be detected by traditional vibration measurements due to its low impact energy. Acoustic emission (AE) measurement is an alternative for this as it has the ability to detect crack initiations or rubbing between moving surfaces. However, AE measurement requires high sampling frequency and consequently huge amount of data are obtained to be processed. It also requires expensive hardware to capture those data, storage and involves signal processing techniques to retrieve valuable information on the state of the machine. AE signal has been utilised for early detection of defects in bearings and gears. This paper presents an online condition monitoring (CM) system for slow speed machinery, which attempts to overcome those challenges. The system incorporates relevant signal processing techniques for slow speed CM which include noise removal techniques to enhance the signal-to-noise and peak-holding down sampling to reduce the burden of massive data handling. The analysis software works under Labview environment, which enables online remote control of data acquisition, real-time analysis, offline analysis and diagnostic trending. The system has been fully implemented on a site machine and contributing significantly to improve the maintenance efficiency and provide a safer and reliable operation.

The big picture : an integrated approach to fashion design education

This paper examines current teaching practice within the context of the Bachelor of Design (Fashion) programme at AUT University and compares it to the approach adopted in previous years. In recent years, staff on the Bachelor of Design (Fashion) adopted a holistic approach to the assessment of design projects similar to the successful ideas and methods put forward by Stella Lange at the FINZ conference, 2005. Prior to adopting this holistic approach, the teaching culture at AUT University was modular and divorced the development of conceptual design ideas from the technical processes of patternmaking and garment construction, thus limiting the creative potential of integrated project work. Fashion Design is not just about drawing pretty pictures but is rather an entire process that encapsulates conceptual design ideas and technical processes within the context of a target market. Fashion design at AUT being under the umbrella of a wider Bachelor of Design must encourage a more serious view of Fashion and Fashion Design as a whole. In the development of the Bachelor of Design degree at AUT, the university recognised that design education would be best serviced by an inclusive approach. At inception, Core Studio and Core Theory papers formed the first semester of the programme across the discipline areas of Fashion, Spatial Design, Graphic Design and Digital Design. These core papers reinforce the reality that there is a common skill set that transcends all design disciplines with the differentiation between disciplines being determined by the techniques and processes they adopt. Studio based teaching within the scope of a major design project was recognised and introduced some time ago for students in their graduating year, however it was also expected that by year 3 the student had amassed the basic skills required to be able to work in this way. The opinion concerning teaching these basic skills was that they were best serviced by a modular approach. Prior attempts to manage design project delivery leant towards deconstructing the newly formed integrated papers in order to ensure key technical skills were covered in enough depth. So, whilst design projects have played an integral part in the delivery of fashion design over the year levels, the earlier projects were timetabled by discipline and unconvincingly connected. This paper discusses how the holistic approach to assessment must be coupled with an integrated approach to delivery. The methods and processes used are demonstrated and some recently trialled developments are shown to have resulted in achieving the integrated approach in both delivery and assessment.

Australian ePortfolio Project–Stage 2 ePortfolio use by university students in Australia : Developing a sustainable community of practice Case studies extracted from the final project report December 2009

Fourteen sase studies extracted from the final project report - December 2009 Australian Flexible Learning Framework: E-portfolios Community of Practice (Aus) Personal learning plans and ePortfolio (Aus) RMIT University: Introducing ePortfolios (Aus) ePortfolio Practice: ALTC Exchange (Aus) Australian PebblePad User Group (APpUG) (Aus) ePortfolios in the library and information services sector (Aus) PDP and ePortfolios UK (UK) SURF NL Portfolio (Netherlands) University of Canterbury ePortfolio (NZ) AAEEBL: Association for Authentic, Experiential and Evidence-Based Learning (USA) Midlands Eportfolio Group, West Midlands(UK) EPAC: Electronic Portfolio Action and Communication (USA) Scottish Higher Education PDP Forum (UK) Centre for Recording Achievement (CRA)(UK)

Comprehensive Australian Study of Entrepreneurial Emergence (CAUSEE): design, data collection and descriptive results

The Comprehensive Australian Study of Entrepreneurial Emergence (CAUSEE) is a research programme that aims to uncover the factors that initiate, hinder and facilitate the process of emergence of new economic activities and organizations. It is widely acknowledged that entrepreneurship is one of the most important forces shaping changes in a country’s economic landscape (Baumol 1968; Birch 1987; Acs 1999). An understanding of the process by which new economic activity and business entities emerge is vital (Gartner 1993; Sarasvathy 2001). An important development in the study of ‘nascent entrepreneurs’ and ‘firms in gestation’ was the Panel Study of Entrepreneurial Dynamics (PSED) (Gartner et al. 2004) and its extensions in Argentina, Canada, Greece, the Netherlands, Norway and Sweden. Yet while PSED I is an important first step towards systematically studying new venture emergence, it represents just the beginning of a stream of nascent venture studies – most notably PSED II is currently being undertaken in the US (2005– 10) (Reynolds and Curtin 2008).

A methodology for object identification and tracking in construction based on spatial modeling and image matching techniques

Understanding the motion characteristics of on-site objects is desirable for the analysis of construction work zones, especially in problems related to safety and productivity studies. This article presents a methodology for rapid object identification and tracking. The proposed methodology contains algorithms for spatial modeling and image matching. A high-frame-rate range sensor was utilized for spatial data acquisition. The experimental results indicated that an occupancy grid spatial modeling algorithm could quickly build a suitable work zone model from the acquired data. The results also showed that an image matching algorithm is able to find the most similar object from a model database and from spatial models obtained from previous scans. It is then possible to use the matched information to successfully identify and track objects.

Object identification based on 3D spatial models of construction sites

On obstacle-cluttered construction sites, understanding the motion characteristics of objects is important for anticipating collisions and preventing accidents. This study investigates algorithms for object identification applications that can be used by heavy equipment operators to effectively monitor congested local environment. The proposed framework contains algorithms for three-dimensional spatial modeling and image matching that are based on 3D images scanned by a high-frame rate range sensor. The preliminary results show that an occupancy grid spatial modeling algorithm can successfully build the most pertinent spatial information, and that an image matching algorithm is best able to identify which objects are in the scanned scene.

Increased traffic exposure and negative birth outcomes : a prospective cohort in Australia

Background: Pregnant women exposed to traffic pollution have an increased risk of negative birth outcomes. We aimed to investigate the size of this risk using a prospective cohort of 970 mothers and newborns in Logan, Queensland. ----- ----- Methods: We examined two measures of traffic: distance to nearest road and number of roads around the home. To examine the effect of distance we used the number of roads around the home in radii from 50 to 500 metres. We examined three road types: freeways, highways and main roads.----- ----- Results: There were no associations with distance to road. A greater number of freeways and main roads around the home were associated with a shorter gestation time. There were no negative impacts on birth weight, birth length or head circumference after adjusting for gestation. The negative effects on gestation were largely due to main roads within 400 metres of the home. For every 10 extra main roads within 400 metres of the home, gestation time was reduced by 1.1% (95% CI: -1.7, -0.5; p-value = 0.001).----- ----- Conclusions: Our results add weight to the association between exposure to traffic and reduced gestation time. This effect may be due to the chemical toxins in traffic pollutants, or because of disturbed sleep due to traffic noise.

Vatkst, profit og strategisk orienteering i gazellevirksomheder (Growth, profitability and strategic orientation among gazelle firms)

Growth and profitability are often essential parts of the overall managerial goals of firms. High growth can be seen as an indicator of success and as a mean for achieving competitive advantage and higher profitability. But high growth can also lead to a number of managerial and organisational challenges, that may affect the profitability negatively. The aim of this article is to analyse the relationship between growth and profitability for Danish gazelle firms, and furthermore to investigate how the strategic orientation of the firm affects this relationship. Our study finds a clear positive relationship between growth and profitability among gazelle firms pursuing a broad market strategy. A managerial implication of this is that the growth strategy should be clearly integrated with the general strategic orientation of the firm.

Machine prognostics based on health state probability estimation

The ability to accurately predict the remaining useful life of machine components is critical for machine continuous operation and can also improve productivity and enhance system’s safety. In condition-based maintenance (CBM), maintenance is performed based on information collected through condition monitoring and assessment of the machine health. Effective diagnostics and prognostics are important aspects of CBM for maintenance engineers to schedule a repair and to acquire replacement components before the components actually fail. Although a variety of prognostic methodologies have been reported recently, their application in industry is still relatively new and mostly focused on the prediction of specific component degradations. Furthermore, they required significant and sufficient number of fault indicators to accurately prognose the component faults. Hence, sufficient usage of health indicators in prognostics for the effective interpretation of machine degradation process is still required. Major challenges for accurate longterm prediction of remaining useful life (RUL) still remain to be addressed. Therefore, continuous development and improvement of a machine health management system and accurate long-term prediction of machine remnant life is required in real industry application. This thesis presents an integrated diagnostics and prognostics framework based on health state probability estimation for accurate and long-term prediction of machine remnant life. In the proposed model, prior empirical (historical) knowledge is embedded in the integrated diagnostics and prognostics system for classification of impending faults in machine system and accurate probability estimation of discrete degradation stages (health states). The methodology assumes that machine degradation consists of a series of degraded states (health states) which effectively represent the dynamic and stochastic process of machine failure. The estimation of discrete health state probability for the prediction of machine remnant life is performed using the ability of classification algorithms. To employ the appropriate classifier for health state probability estimation in the proposed model, comparative intelligent diagnostic tests were conducted using five different classifiers applied to the progressive fault data of three different faults in a high pressure liquefied natural gas (HP-LNG) pump. As a result of this comparison study, SVMs were employed in heath state probability estimation for the prediction of machine failure in this research. The proposed prognostic methodology has been successfully tested and validated using a number of case studies from simulation tests to real industry applications. The results from two actual failure case studies using simulations and experiments indicate that accurate estimation of health states is achievable and the proposed method provides accurate long-term prediction of machine remnant life. In addition, the results of experimental tests show that the proposed model has the capability of providing early warning of abnormal machine operating conditions by identifying the transitional states of machine fault conditions. Finally, the proposed prognostic model is validated through two industrial case studies. The optimal number of health states which can minimise the model training error without significant decrease of prediction accuracy was also examined through several health states of bearing failure. The results were very encouraging and show that the proposed prognostic model based on health state probability estimation has the potential to be used as a generic and scalable asset health estimation tool in industrial machinery.

Online urban information systems

Countless factors affect the inner workings of a city, so in an attempt to gain an understanding of place and making sound decisions, planners need to utilize decision support systems (DSS) or planning support systems (PSS). PSS were originally developed as DSS in academia for experimental purposes, but like many other technologies, they became one of the most innovative technologies in parallel to rapid developments in software engineering as well as developments and advances in networks and hardware. Particularly, in the last decade, the awareness of PSS have been dramatically heightened with the increasing demand for a better, more reliable and furthermore a transparent decision-making process (Klosterman, Siebert, Hoque, Kim, & Parveen, 2003). Urban planning as an act has quite different perspective from the PSS point of view. The unique nature of planning requires that spatial dimension must be considered within the context of PSS. Additionally, the rapid changes in socio-economic structure cannot be easily monitored or controlled without an effective PSS.

Removing barriers to protection at the exported border : visas, carrier sanctions, and international obligation

Asylum is being gradually denuded of the national institutional mechanisms (judicial, legislative and administrative) that provide the framework for a fair and effective asylum hearing. In this sense, there is an ongoing ‘denationalization’ or ‘deformalization’ of the asylum process. This chapter critically examines one of the linchpins of this trend: the erection of pre-entry measures at ports of embarkation in order to prevent asylum seekers from physically accessing the territory of the state. Pre-entry measures comprise the core requirement that foreigners possess an entry visa granting permission to enter the state of destination. Visa requirements are increasingly implemented by immigration officials posted abroad or by officials of transit countries pursuant to bilateral agreements (so-called ‘juxtaposed’ immigration controls). Private carriers, which are subject to sanctions if they bring persons to a country who do not have permission to enter, also engage in a form of de facto immigration control on behalf of states. These measures constitute a type of ‘externalized’ or ‘exported’ border that pushes the immigration boundaries of the state as far from its physical boundaries as possible. Pre-entry measures have a crippling impact on the ability of asylum seekers to access the territory of states to claim asylum. In effect, states have ‘externalized’ asylum by replacing the legal obligation on states to protect refugees arriving at ports of entry with what are perceived to be no more than moral obligations towards asylum seekers arriving at the external border of the state.

Maximum recovery after knee replacement - the MARKER study rationale and protocol

Background There is little scientific evidence to support the usual practice of providing outpatient rehabilitation to patients undergoing total knee replacement surgery (TKR) immediately after discharge from the orthopaedic ward. It is hypothesised that the lack of clinical benefit is due to the low exercise intensity tolerated at this time, with patients still recovering from the effects of major orthopaedic surgery. The aim of the proposed clinical trial is to investigate the clinical and cost effectiveness of a novel rehabilitation strategy, consisting of an initial home exercise programme followed, approximately six weeks later, by higher intensity outpatient exercise classes. Methods/Design In this multicentre randomised controlled trial, 600 patients undergoing primary TKR will be recruited at the orthopaedic pre-admission clinic of 10 large public and private hospitals in Australia. There will be no change to the medical or rehabilitative care usually provided while the participant is admitted to the orthopaedic ward. After TKR, but prior to discharge from the orthopaedic ward, participants will be randomised to either the novel rehabilitation strategy or usual rehabilitative care as provided by the hospital or recommended by the orthopaedic surgeon. Outcomes assessments will be conducted at baseline (pre-admission clinic) and at 6 weeks, 6 months and 12 months following randomisation. The primary outcomes will be self-reported knee pain and physical function. Secondary outcomes include quality of life and objective measures of physical performance. Health economic data (health sector and community service utilisation, loss of productivity) will be recorded prospectively by participants in a patient diary. This patient cohort will also be followed-up annually for five years for knee pain, physical function and the need or actual incidence of further joint replacement surgery. Discussion The results of this pragmatic clinical trial can be directly implemented into clinical practice. If beneficial, the novel rehabilitation strategy of utilising outpatient exercise classes during a later rehabilitation phase would provide a feasible and potentially cost-effective intervention to optimise the physical well-being of the large number of people undergoing TKR.