Michael Rostovtzeff. Per la storia del colonato romano

info:eu-repo/semantics/published

Expression of liver-specific member of the 3β-hydroxysteroid dehydrogenase family, an isoform possessing an almost exclusive 3-ketosteroid reductase activity

We have recently characterized two types of rat 3β-hydroxysteroid dehydrogenase/Δ5-Δ4 isomerase (3β-HSD) isoenzymes expressed in adrenals and gonads. In addition, we have cloned a third type of cDNA encoding a predicted type III 3β-HSD protein specifically expressed in the male rat liver which shares 80% similarity with the two other isoenzymes. Transient expression in human HeLa cells of the cDNAs reveals that the type III 3β-HSD protein does not display oxidative activity for the classical substrates of 3β-HSD, in contrast to the type I 3β-HSD isoenzyme. However, in the presence of NADH, type III isoenzyme, in common with the type I isoform, converts 5α-androstane-3,17-dione (A-dione) and 5α-dihydrotestosterone (DHT) to the corresponding 3β-hydroxysteroids. In fact, the type I and the type III isoenzymes have the same affinity for DHT with K(m) values of 5.05 and 6.16 μM, respectively. When NADPH is used as cofactor, the affinity for DHT of the type III isoform becomes higher than that of the type I isoform with K(m) values of 0.12 and 1.18 μM, respectively. The type III isoform is thus a 3-ketoreductase using NADPH as preferred cofactor which is responsible for the conversion of 3-keto-saturated steroids such as DHT and A-dione into less active steroids.

Modulation de la croissance des cellules souches hématopoiétiques du sang de cordon par des facteurs de croissance

info:eu-repo/semantics/published

The HITRAN 2008 molecular spectroscopic database

This paper describes the status of the 2008 edition of the HITRAN molecular spectroscopic database. The new edition is the first official public release since the 2004 edition, although a number of crucial updates had been made available online since 2004. The HITRAN compilation consists of several components that serve as input for radiative-transfer calculation codes: individual line parameters for the microwave through visible spectra of molecules in the gas phase; absorption cross-sections for molecules having dense spectral features, i.e. spectra in which the individual lines are not resolved; individual line parameters and absorption cross-sections for bands in the ultraviolet; refractive indices of aerosols, tables and files of general properties associated with the database; and database management software. The line-by-line portion of the database contains spectroscopic parameters for 42 molecules including many of their isotopologues. © 2009 Elsevier Ltd.

Laboratory Fourier transform spectroscopy of the water absorption continuum from 2500 to 22500 cm-1

info:eu-repo/semantics/published

Absolute intensities of water vapor lines in the near ultraviolet and visible regions

Collection :Europto series, 6

Modelling induction skull melting design modifications

Induction Skull Melting (ISM) is a technique for heating, melting, mixing and, possibly, evaporating reactive liquid metals at high temperatures with a minimum contact at solid walls. The presented numerical modelling involves the complete time dependent process analysis based on the coupled electromagnetic, temperature and turbulent velocity fields during the melting and liquid shape changes. The simulation model is validated against measurements of liquid metal height, temperature and heat losses in a commercial size ISM furnace. The observed typical limiting temperature plateau for increasing input electrical power is explained by the turbulent convective heat losses. Various methods to increase the superheat within the liquid melt, the process energy efficiency and stability are proposed.

Multiscale modelling of dendrite growth during vacuum arc remelting

Vacuum Arc Remelting (VAR) is the accepted method for producing homogeneous, fine microstructures that are free of inclusions required for rotating grade applications. However, as ingot sizes are increasing INCONEL 718 becomes increasingly susceptible to defects such as freckles, tree rings, and white spots increases for large diameter billets. Therefore, predictive models of these defects are required to allow optimization of process parameters. In this paper, a multiscale and multi-physics model is presented to predict the development of microstructures in the VAR ingot during solidification. At the microscale, a combined stochastic nucleation approach and finite difference solution of the solute diffusion is applied in the semi-solid zone of the VAR ingot. The micromodel is coupled with a solution of the macroscale heat transfer, fluid flow and electromagnetism in the VAR process through the temperature, pressure and fluid flow fields. The main objective of this study is to achieve a better understanding of the formation of the defects in VAR by quantifying the influence of VAR processing parameters on grain nucleation and dendrite growth. In particular, the effect of different ingot growth velocities on the microstructure formation was investigated. It was found that reducing the velocity produces significantly more coarse grains.

The tilt casting of titanium aluminides

TiAl castings are prone to various defects including bubbles entrained during the turbulent filling of moulds. The present research has exploited the principles of the Durville tilt casting technique to develop a novel process in which the Induction Skull Melting (ISM) of TiAl alloys in a vacuum chamber has been combined with controlled tilt pouring to achieve the tranquil transfer of the metal into a hot ceramic shell mould. Practical casting equipment has been developed to evaluate the feasibility of this process in parallel with the development of novel software to simulate and optimize it. The PHYSICA CFD code was used to simulate the filling, heat transfer and solidification during tilt pouring using a number of free surface modelling techniques, including the novel Counter Diffusion Method (CDM). In view of the limited superheat, particular attention was paid to the mould design to minimize heat loss and gas entrainment caused by interaction between the counter-flowing metal and gas streams. The model has been validated against real-time X-ray movies of the tilt casting of aluminium and against TiAl blade castings. Modelling has contributed to designing a mould to promote progressive filling of the casting and has led to the use of a parabolic tilting cycle to balance the competing requirements for rapid filling to minimize the loss of superheat and slow filling minimize the turbulence-induced defects.

Diversity of functional groups in the vegetation sandy seashore of the Grande, Anclitas and Caguamas Cays (Jardines de la Reina Archipelago, Cuba)

Sandy shores are known to be extreme ecosystems where the vegetation has evolved many morphological and physiological adaptations for its survival. With the aim of identify possible relationships between the vegetation´s functional diversity with abiotic factors and its corresponding quantification, we collected data on the abundance and richness of the sandy coast vegetation complex in Grande, Anclitas and Caguamas keys. Its flora is largely characterized by the dominance of hemicryptophytes and chamaephytes plants with nanophyllous leaves and displaying dispersal syndromes such as zoochory and anemochory. However, the functional groups´ richness, in the present study, varies from one key to another. Functional diversity is similar between the wet and dry seasons, and its spatial variation is influenced by the interplay of the set of abiotic factors herein studied.

Amorous Ex/Incursions: Love in Writings of Badiou, Weil, Fromm, and Barthes

My dissertation explores the enabling contributions of love to the practice of ethico-political and cultural critique. Engaging with the work of Alain Badiou, Simone Weil, Erich Fromm, and Roland Barthes, I examine love in terms of the following modalities: waiting, giving, and looking. I place the aforementioned thinkers in dialogue with selected literary and cinematic texts to explicate and interrogate the meaningful possibilities of their discourse on love. In my chapter on Alain Badiou, I discuss his ontology, which I draw upon heavily to set the theoretical parameters of my study. I also discuss the logic of love that he develops in his philosophy. Speaking to the problem of pre-Evental agency that critics of his work identify, I suggest that waiting as attention, as theorized by Simone Weil, might be the closest form of agency that a pre-Evental (amorous) being can experience. In my discussion of Erich Fromm, I reevaluate his “art of loving” within the constellation of late capitalism. Reading his work through a Lacanian lens, I explore the utility of his prescriptions by examining Chuck Palahniuk’s controversial novel Fight Club. In my chapter on Roland Barthes, I theorize the possibility of cinematic looking that does not depend on the antagonism inherent in the binaries masculine/ feminine and (Gazing) spectator/ (to-be-looked-at) image. Towards this objective, I propose the “amorous look,” a mode of viewing occasioned by cinematic punctual encounters, that I contend is beyond the domain of desire and perversion. I deploy the “amorous look” as I reflect on Aureus Solito’s film Ang Pagdadalaga ni Maximo Olivares (The Blossoming of Maximo Olivares) and its representations of love and waiting.

Reality Shows in Chile, origin and road map. Historical-Communication Dialogues

Reality shows are TV programs which represent a format used in television nowadays; however, the observation practices of individual and/or group intimacy dates from thousands years ago. Sometimes this was driven by voyeurism or morbid fascination, some others, by the purpose of guarding, supervising and maintaining status quo. This work offers an alternative answer to the explanation of this type of TV program emergence and relates this appearance to a government procedure bound up with modern State terrorism which began at the end of the eighteenth century and has been recalled by different regimes until present days.

Dogs in the paradise: The influence of the cynical philosophy in the construction of the myth of the good savage

This paper studies the influence of cynic philosophy in the construction of the myth of the good savage. In the first part it studies the importance of cynicism in the XVI century and how the cynic influence of Erasmus, More and Montaigne was fundamental to the way that Europe approached the American indigenous. In the second part it studies the cynic motives that could have influenced in the construction of the myth of the good savage.

Hybrid philosophy and rational vitalism in Canguilhem and Ortega y Gasset

This paper explores the problem of the synthesis between vitalism and rationalism, in contemporary philosophy. With this aim, we compare the intellectual careers of Georges Canguilhem (1904-1995) and José Ortega y Gasset (1883-1955). We contrast their conceptions of philosophy as “hybrid” knowledge, closely related to science, as well as their points of view on Vitalism, anthropology, the technique and the perspectivism. To avoid that comparison is purely abstract and ahistorical, we use the method of the sociology of philosophy. This forces us to locate both paths in their respective philosophical fields and generational units, also according to his social background and professional career.