Effect of inter-edge Coulomb interactions on transport through a point contact in nu=5/2 quantum Hall state

We study transport across a point contact separating two line junctions in a nu = 5/2 quantum Hall system. We analyze the effect of inter-edge Coulomb interactions between the chiral bosonic edge modes of the half-filled Landau level (assuming a Pfaffian wave function for the half-filled state) and of the two fully filled Landau levels. In the presence of inter-edge Coulomb interactions between all the six edges participating in the line junction, we show that the stable fixed point corresponds to a point contact that is neither fully opaque nor fully transparent. Remarkably, this fixed point represents a situation where the half-filled level is fully transmitting, while the two filled levels are completely backscattered; hence the fixed point Hall conductance is given by G(H) = 1/2e(2)/h. We predict the non-universal temperature power laws by which the system approaches the stable fixed point from the two unstable fixed points corresponding to the fully connected case (G(H) = 5/2e(2)/h) and the fully disconnected case (G(H) = 0).

Vikuroivia vilkaisuja : Ruumis, sukupuoli, seksuaalisuus ja visuaalisen kulttuurin tutkimus

The PhD dissertation "Bucking Glances: On Body, Gender, Sexuality and Visual Culture Research" consists of theoretical introduction and five articles published between 2002-2005. The articles analyze the position of visual representations in the processes of knowledge production on acceptable genders, bodies, and sexualities in contemporary Wes¬tern societies. The research material is heterogeneous, consisting of representations of contemporary art, advertisements, and fashion images. The ideological starting point of the PhD dissertation is the politics of the gaze and the methods used to expose this are the concepts of oppositional gaze, close reading, and resisting reading. The study situates visual representations in dialogue with the concepts of the grotesque and androgyny, as well as with queer-theory and theories of the gaze. The research challenges normative meanings of visual representations and opens up space for more non-conventional readings attached to femininity and masculinity. The visual material is read as troubling the prevailing heteronormative gender system. The dissertation also indicates how visual culture research utilizing the approach of queer theory can be fruitful in opposing and re-visioning changes in the repressive gender system. The article "A Heroic Male and A Beautiful Woman. Teemu Mäki, Orlan and the Ambivalence of the Grotesque Body" problematizes the concept of heroic masculinity through the analysis of the Finnish artist Teemu Mäki's masochistic performance The Good Friday (1989). It also analyzes cosmetic surgery, undertaken by the French artist Orlan, as a cultural tool in constructing and visualizing the contemporary, com¬mercial ideals of female beauty. The article "Boys Will Be Girls Will Be Boys Will Be Girls. The Ambivalence of Androgyny in Calvin Klein' Advertisements" is a close reading of the Calvin Klein perfume advertisement One (1998) in reference to the concept of androgyny. The critical point of the article is that androgynous male bodies allow the extension of the categorical boundaries of masculinity and homosexuality, whereas representations of androgynous women feed into the prevailing stereotypes of femininity, namely the fear of fat. The article "See-through Closet: Female Androgyny in the 1990s Fashion Images, New Woman and Lesbian Chic" analyzes the late 1990s fashion advertisements through the concept of female androgyny. The article argues that the figures of the masculine female androgynes in the late 1990s fashion magazines do not problematize the dichotomous gender binary. The women do not pass as men but produce a variation of heterosexual desirability. At the same time, the representations open up space for lesbian gazing and desiring. The article "Why are there no lesbian advertisements?" addresses the issue of femme gaze and desire in relation to heterosexual fashion advertisements from the British edition of the mainstream fashion magazine Vogue. The article considers possibilities for resistant femme visibility, identification, and desire. The article "Woman, Food, Home. Pirjetta Brander's and Heidi Romo's Works as Bucking Representations of Femininity" analyses the production and queering of heteronormative femininity and family through the analysis of art works. The article discusses how the term queer has been translated into Finnish. The article also introduces a new translation for the term queer: the noun vikuuri, i.e. faulty form and the verb vikuroida, i.e. to buck. In Finnish, the term vikuuri is the vernacular or broken form of the term figure, i.e. figuuri. Vikuuri represents all forms situated outside the norm and the normative.

Semi-similar solution of an unsteady compressible three-dimensional stagnation point boundary layer flow with massive blowing

A semi-similar solution of an unsteady laminar compressible three-dimensional stagnation point boundary layer flow with massive blowing has been obtained when the free stream velocity varies arbitrarily with time. The resulting partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme with a quasi-linearization technique in the nodal point region and an implicit finite-difference scheme with a parametric differentiation technique in the saddle point region. The results have been obtained for two particular unsteady free stream velocity distributions: (i) an accelerating stream and (ii) a fluctuating stream. Results show that the skin-friction and heat-transfer parameters respond significantly to the time dependent arbitrary free stream velocity. Velocity and enthalpy profiles approach their free stream values faster as time increases. There is a reverse flow in the y-wise velocity profile, and overshoot in the x-wise velocity and enthalpy profiles in the saddle point region, which increase as injection and wall temperature increase. Location of the dividing streamline increases as injection increases, but as the wall temperature and time increase, it decreases.

Unsteady free Convection MHD Boundary Layer Flow Near a Three-Dimensional Stagnation Point

The unsteady free convection boundary layer hydromagnectic flow near a stagnation point of a three-dimensional body with applied magnetic field and time-dependent wall temperature has been studied. Both semi-semilar and self-similar cases have been considered. The equations governing the above flow have been solved numerically using an implicit finite-difference scheme due to Keller. The magnetic field is found to reduce both the heat transfer and skin friction. The effect of the variation of the wall temperature with time and of mass transfer is found to be more pronounced on the heat transfer than on the skin friction. In self-similar case, for decelerating flow, there is temperature overshoot in the presence of fmagnetic field, but in semi-similar case overshoot occurs even without magnetic field due to the unsteadiness

Unsteady laminar incompressible second-order boundary-layer flow at a three-dimensional stagnation point

The unsteadely laminar incompressible second-order boundary-layer flow at the stagnation point of a three-dimensional body has been studied for both nodal and saddle point regions. The effects of mass transfer and Prandtl number have been taken into account. The equations governing the flow have been solved numerically using an implicit finite-difference scheme. It has been found that the parameter characterizing the unsteadiness in the velocity of the free stream, the nature of the stagnation point, the mass transfer and Prandtl number strongly affect the second-order skin friction and heat transfer. The overall skin friction becomes less due to second-order effects but the heat transfer has the opposite behaviour. For large injection, the second-order skin-friction and heat-transfer results prevail over the first-order boundary layer results whereas for the case of large suction the behaviour is just the opposite.

Unsteady compressible 3-dimensional boundary-layer flow near an asymmetric stagnation point with mass transfer

The heat and mass transfer for unsteady laminar compressible boundary-layer flow, which is asymmetric with respect to a 3-dimensional stagnation point (i.e. for a jet incident at an angle on the body), have been studied. It is assumed that the free-stream velocity, wall temperature, and surface mass transfer vary arbitrarily with time and also that the gas has variable properties. The solution in the neighbourhood of the stagnation point has been obtained by series expansion in the longitudinal distance. The resulting partial differential equations have been solved numerically using an implicit finite-difference scheme. The results show that, in contrast with the symmetric flow, the maximum heat transfer does not occur at the stagnation point. The skin-friction and heat-transfer components due to asymmetric flow are only weakly affected by the mass transfer as compared to those components associated with symmetric flow. The variation of the wall temperature with time has a strong effect on the heat transfer component associated with the symmetric part of the flow. The skin friction and heat transfer are strongly affected by the variation of the density-viscosity product across the boundary layer. The skin friction responds more to the fluctuations of the free stream oscillating velocities than the heat transfer. The results have been compared with the available results and they are found to be in excellent agreement.

A Front end Switched Rectifier DC Source for Neutral Point Balancing of A NPC Three-Level Inverter for The Full Modulation Range

A switched DC voltage three level NPC is proposed in this paper to eliminate capacitor balancing problems in conventional three-level Neutral Point Clamped (NPC) inverter. The proposed configuration requires only one DC link with a voltage V-dc/2, where V-dc is the DC link voltage in a onventional NPC inverter. To get rated DC link voltage (V-dc), the voltage source is alternately onnected in parallel to one of the two series capacitors using two switches and two diodes with device voltage rating of V-dc/2. The frequency at which the voltage source is switched is independent and will not affect the operation of NPC inverter. The switched voltage source in this configuration balances the capacitors automatically. The proposed configuration can also be used as a conventional two level inverter in lower modulation range, thereby increases the reliability of the drive system. A space vector based PWM scheme is used to verify this proposed topology.

Unsteady compressible second-order boundary layers at the stagnation point of two-dimensional and axisymmetric bodies

The unsteady laminar compressible boundary-layer flow over two-dimensional and axisymmetric bodies at the stagnation point with mass transfer has been studied for all second-order boundary layer effects when the basic potential flow admits selfsimilarity. The solutions for the governing equations are obtained by using an implicit finite-difference scheme. Computations have been carried out for different values of the parameters characterizing the unsteadiness in the free stream velocity, wall temperature, mass transfer rate and variable gas properties. The results are found to be strongly affected by the unsteadiness in the free stream velocity. For large injection rates the second-orderboundary layer effects may prevail over the first-order boundary layer, but reverse is true for suction. The wall temperature and the variation of the density-viscosity product across the boundary layer appreciably change the skin-friction and heat-transfer rates due to second-order boundary-layer effects.

Self-similar solution of unsteady compressible three-dimensional stagnation-point boundary layers

The self-similar solution of the unsteady laminar compressible boundary-layer flow with variable properties at a three-dimensional stagnation point with mass transfer has been obtained when the free-stream velocity varies inversely as a linear function of time. The resulting ordinary differential equations have been solved numerically using an implicit finite-difference scheme. The results are found to be strongly dependent on the parameter characterizing the unsteadiness in the free-stream velocity. The velocity profiles show some features not encountered in steady flows.

Simple sequence repeat markers associated with three quantitative trait loci for black point resistance can be used to enrich selection populations in bread wheat

Black point in wheat has the potential to cost the Australian industry $A30.4 million a year. It is difficult and expensive to screen for resistance, so the aim of this study was to validate 3 previously identified quantitative trait loci (QTLs) for black point resistance on chromosomes 2B, 4A, and 3D of the wheat variety Sunco. Black point resistance data and simple sequence repeat (SSR) markers, linked to the resistance QTLs and suited to high-throughput assay, were analysed in the doubled haploid population, Batavia (susceptible) × Pelsart (resistant). Sunco and Pelsart both have Cook in their pedigree and both have the Triticum timopheevii translocation on 2B. SSR markers identified for the 3 genetic regions were gwm319 (2B, T. timopheevii translocation), wmc048 (4AS), and gwm341 (3DS). Gwm319 and wmc048 were associated with black point resistance in the validation population. Gwm341 may have an epistatic influence on the trait because when resistance alleles were present at both gwm319 and wmc048, the Batavia-derived allele at gwm341 was associated with a higher proportion of resistant lines. Data are presented showing the level of enrichment achieved for black point resistance, using 1, 2, or 3 of these molecular markers, and the number of associated discarded resistant lines. The level of population enrichment was found to be 1.83-fold with 6 of 17 resistant lines discarded when gwm319 and wmc048 were both used for selection. Interactions among the 3 QTLs appear complex and other genetic and epigenetic factors influence susceptibility to black point. Polymorphism was assessed for these markers within potential breeding material. This indicated that alternative markers to wmc048 may be required for some parental combinations. Based on these results, marker-assisted selection for the major black point resistance QTLs can increase the rate of genetic gain by improving the selection efficiency and may facilitate stacking of black point resistances from different sources.

Onko varhaisen tuen päiväkoti mahdollinen? : Tutkimus varhaiskasvatuksen yhteisöllisestä kehittämisestä

Is the early childhood day care facility possible? The research considering communal development of the early education. In Finland mothers and fathers look after 400 000 pre-school children. Half of these attend day care facilities, in which 50 000 staff are employed. The aim of this research is to develop co-operation practices within the day care centre. This research refines and expands my own interest in and knowledge of day care management and content development. The basis of the research draws upon ethnographic material covering the period 1999–2005. The day care centre chosen as a central informant was the first suburban centre founded in 1963, and it provided a rich local and welfare state research perspective. It became clear that the day care facility’s co-operation practices formed the basis of bringing up children and at the same time produced a new multi-operational and multi-layered community for child participation. Adult day care centre workers bringing up the children as a professional work and solutions defining the conditions for the work are expressed in a child’s upbringing. This obviously has an impact in where as the development of communities. From the human and community scientific point of view, the group of youngest children will take up a future position as key players in communities as essential actors and reformers. The research was carried out as multiphase and multiscientific practical research and iterative data formation. The results verified that the co-operation between parents and day care staff produces important benefits for all the stakeholders. However, the day care staff has difficulties in implementing the benefits. During the research process, it became clear that conceptually day care staff saw the practices as ”very important, but not easily realised in practice”. As a result this demanded further research to address this issue and to extend this to the carefacility’s co-operation practises and their communal and social conditions. The research looks at the carefacility’s co-operation with key stakeholders. At the same time it undertakes an analytical and historical examination of carefacilitys’s with an experimental focus as two day care centres chosen as experimental objects. The results of the research showed that the benefits gained by children were determined by the day care centre’s socio-political structure and the parent’s resources. The research framework categorised early childhood education as generational and gender based structures. As part of the research, the strains endemic to these formations have been examined. The system for bringing up children was created as part of a so called welfare state project by implemented by the Day Care Act in year 1973. The law secured the subjective right for every pre-school child to have access to day care facilities. The law also introduced a labour and sosiopolitical phase and the refinement of the day care facility’s education-care concept. The latest phase that started during the early 1990´s was called the market-based social services strategy. As a result of this phase, state support was limited and the screening function of the law was relaxed. This new strategy resulted in a divisive and bureaucratic social welfare system, that individualised and segregated children and their parents, leaving some families outside the communal and welfare state benefit net. The modern day care centre is a hybrid of different aims. Children spend longer and more irregular time in day care. The families are multicultural and that requires more training for the staff. The work in day care has been enhanced, for example he level of education for the staff has been lowered and productivity has been improved. However, administrative work and different kinds of support and net work functions together with the continuous change have taken over from the work done face to face with children. Staff experiences more pressure as the management and the work load has increased. Consequently the long-term planning and daily implementation of the nuclear task of the day care facility is difficult to control. This will have an effect on both motivation and manageability of the work. Overall quality of the early childhood upbringing has been weakened. The possibilities for the near future were tested in the two day care centres chosen as an experi-ment objects. The analysis of these experiments showed that generative interaction work will benefit everyone: children, parents and employees. The main results of the research are new concepts of an early support day care centre, which can be empirically and theoretically possi-ble for development the near future. Key words: Day care facility’s co-operation practises, early childhood education as generational structure, child’s multi-operational and multi-layered community, multi-subjective operator, generative interaction work, communal composition.

An On-Line Algorithm for the Location of Cross Point Faults in Programmable Logic Arrays

An on-line algorithm is developed for the location of single cross point faults in a PLA (FPLA). The main feature of the valgorithm is the determination of a fault set corresponding to the response obtained for a failed test. For the apparently small number of faults in this set, all other tests are generated and a fault table is formed. Subsequently, an adaptive procedure is used to diagnose the fault. Functional equivalence test is carried out to determine the actual fault class if the adaptive testing results in a set of faults with identical tests. The large amount of computation time and storage required in the determination, a priori, of all the fault equivalence classes or in the construction of a fault dictionary are not needed here. A brief study of functional equivalence among the cross point faults is also made.

Heat transfer with solid liquid phase change initiating at a point in a semi infinite mold

Short-time analytical solutions of temperature and moving boundary in two-dimensional two-phase freezing due to a cold spot are presented in this paper. The melt occupies a semi-infinite region. Although the method of solution is valid for various other types of boundary conditions, the results in this paper are given only for the prescribed flux boundary conditions which could be space and time dependent. The freezing front propagations along the interior of the melt region exhibit well known behaviours but the propagations along the surface are of new type. The freezing front always depends on material parameters. Several interesting results can be obtained as particular cases of the general results.

Identification of genetic regions associated with black point in barley.

Black point (BP) can cause severe losses to the barley industry through downgrading and discounting of malting barley. The genetic improvement in BP resistance of barley is complex, requiring reliable screening tools, an understanding of genotype by environment interactions and an understanding of the biochemical mechanisms of melanisation involved in BP development. Thus the application of molecular markers for resistance to BP may be a useful tool for plant breeders. We have investigated the genetic regions associated with BP resistance in the barley F2 population, Valier/Binalong. Quantitative trait loci (QTLs) contributed by the resistant parent Valier, were detected on chromosomes 2HS, 2HC, 3HL, 4HL and a QTL contributed by the susceptible parent, Binalong was detected on 5HL. Three of the four QTLs were detected in two distinctly different environments. The differences observed in BP resistance between these two environments and the implications for accelerated screening are discussed. Identified SSR markers in these regions may be useful for selecting black point resistance in related breeding materials.