Market analysis of a new business opportunity in mobile-casual gaming: Partnership between Nmusic and Rovio Entertainment Ltd

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Strategy definition of a new business opportunity in mobile-casual gaming: Partnership between Nmusic and Rovio Entertainment Ltd.

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Development of benchmarks for operating costs and resources consumption to be used in healthcare building sustainability assessment methods

Since the last decade of the twentieth century, the healthcare industry is paying attention to the environmental impact of their buildings and therefore new regulations, policy goals and Buildings Sustainability Assessment (HBSA) methods are being developed and implemented. At the present, healthcare is one of the most regulated industries and it is also one of the largest consumers of energy per net floor area. To assess the sustainability of healthcare buildings it is necessary to establish a set of benchmarks related with their life-cycle performance. They are both essential to rate the sustainability of a project and to support designers and other stakeholders in the process of designing and operating a sustainable building, by allowing the comparison to be made between a project and the conventional and best market practices. This research is focused on the methodology to set the benchmarks for resources consumption, waste production, operation costs and potential environmental impacts related to the operational phase of healthcare buildings. It aims at contributing to the reduction of the subjectivity found in the definition of the benchmarks used in Building Sustainability Assessment (BSA) methods, and it is applied in the Portuguese context. These benchmarks will be used in the development of a Portuguese HBSA method.

Honours students: good marks and what else?

Currently in Portugal academic excellence in higher education is given recognition through merit prizes. Because honours students can be seen as having the potential to achieve imporant levels of professional expertise, especially if they have some personal skills, it is important to know not only the marks of the students but also the personal characteristics that contribute to academic success and which may also be important for career success. Some theoretical models of giftedness and excellence agree with this idea and this work considers the latest contribution of Renzulli (2005) where it is pointed out that excellent achievements result from the combination of motivational, intellectual and creative factors as well as from co-cognitive factors which are most associated with personality functioning in a particular context. The main purpose of this paper is to analyze how honours students differ from their classmates in various psychological dimensions: Cognition-creativity, Motivation and Learning Strategies, Persistence, Social Interaction, Drive for Excellence and Cultural Interest. These dimensions were measured by the Inventory of Psychological Characteristics Associated with Academic Performance (ICPADA), which was constructed taking into consideration the previous study of Scaeger et al. (2012). The sample included 914 Portuguese higher educatoin students from a first cycle degree in the Bologna process. Participants were selected from three different fields of study: Social and Human Sciences; Science and Technology; Arts and Humanities. The data collected through the administration of the ICPADA was presented, and the results revealed a higher self-perception by honours students in all areas analyzed, with the exception of the dimension of social interaction. In addition an interaction effect was revealed for persistence, social interaction, and cultural interest. The field of study and whether the participants were honours students or not were also taken into account. Some implications for future studies are presented here along with possible interventions for honours students.

Barriers to innovation and public policy in Catalonia

The present paper analyses the link between firms’ decisions to innovate and the barriers that prevent them from being innovative. The aim is twofold. First, it analyses three groups of barriers to innovation: the cost of innovation projects, lack of knowledge and market conditions. Second, it presents the main steps taken by Catalan Government to promote the creation of new firms and to reduce barriers to innovation. The data set used is based on the 2004 official innovation survey of Catalonia which was taken from the Spanish CIS-4 sample. This sample includes individual information on 2,954 Catalan firms in manufacturing industries and knowledge-intensive services (KIS). The empirical analysis reveals pronounced differences regarding a firm’s propensity to innovate and its perception of barriers. Moreover, the results show that cost and knowledge barriers seem to be the most important and that there are substantial sectoral differences in the way that firms react to barriers. The results of this paper have important implications for the design of future public policy to promote entrepreneurship and innovation together.

The Extent and Cyclicality of Career Changes: Evidence for the UK

Using quarterly data for the U.K. from 1993 through 2012, we document that in economic downturns a smaller fraction of unemployed workers change their career when starting a new job. Moreover, the proportion of total hires that involves a career change for the worker also drops in recessions. Together with a simultaneous drop in overall turnover, this implies that the number of career changes declines during recessions. These results indicate that recessions are times of subdued reallocation rather than of accelerated and involuntary structural transformation. We back this interpretation up with evidence on who changes careers, which industries and occupations they come from and go to, and at which wage gains.

Arts Fusió : una proposta didàctica transdisciplinària a través d’un procés d’aprenentatge creatiu

Arts Fusió és un projecte pedagògic entorn a la transdisciplinarietat artística, consistent en una recerca al voltant d'aquest concepte i dels valors formatius que aporta en processos d'aprenentatge creatiu. A partir d'aquí hem creat uns principis metodològics per orientar una didàctica cap a la fusió del teatre, la dansa, la música i les arts visuals. Per posar de manifest els beneficis de la nostra proposta hem realitzat aplicacions didàctiques en educacio artística superior i en educació secundària obligatòria. Metodològicament ens situem en el paradigma de la complexitat i basem les intervencions en una perspectiva qualitativa exploratòria, en concret dintre de la línia de la investigació avaluativa. Com a resultats del treball hem vist que la transdisciplinarietat artística pot actuar com a mitjà i com a fi educatiu segons el context en el que ens trobem.

Task Force on the Physical Sciences Report and Recommendation

Ireland has positioned itself to take advantage of technological change by encouraging the inward investment of high-tech industries and by providing a highly-educated workforce to sustain and enlarge them. Employment of science, engineering and technology graduates at all levels has been a hallmark of the modern Irish economy, as the educational sector responded to the mix of skills demanded by industry. An outstanding record of graduate output has contributed to the phenomenal growth in Irish-based technology. In an era of rapid technological change, the goal of "scientific literacy for all" has become a primary objective of a general education. Science is one of three literacy domains, along with reading and mathematics, that is included in measures of educational achievement by the OECD.

Dairy Markets in Asia: An Overview of Recent Findings and Implications, September 2005

This paper is an overview of important findings regarding the ongoing evolution of Asian dairy markets based on a series of new economic investigations. These investigations provide systematic empirical foundations for assessing Asian dairy markets with their new consumption patterns, changing industries, and trade prospects under different domestic and trade policy regimes. The findings are drawn from four case studies (China, India, Japan, and Korea), as well as a prospective analysis of future regional patterns of consumption and a policy analysis of trade liberalization of Asian dairy markets. The overview distills the findings of these new investigations and integrates them in the earlier economic literature; it draws policy implications and identifies lessons for countries outside of Asia, especially for emerging exporters in Latin America.

Effect of rock powder and vinasse on two types of soils

Can vinasse accelerate the change of minerals in rock dust to obtain fertilizers, using residues from alcohol agro-industries and mining? Answering this question was the main objective of this study. Therefore, an experiment was set up in the laboratory in a completely randomized design using Polyvinyl Chloride (PVC) columns, in which the 0-50 cm layers of a clayey soil (eutroferric Red Oxisol) and sandy soil (Typic Quartzipsamment) were reproduced. We applied three different rates of basalt powder (0.0; 2.0, and 4.0 t ha-1) and one rate of vinasse (200 m³ ha-1) to the soils. The control was made by treatments with water (200 m³ ha-1) with the same rates of rock powder. Samples were first collected on the surface of each column (1, 15, 30, 45, 60, and 90 days after the application of vinasse and rock powder), and, at the end of the experiment, at the various depths and in leached water, to determine pH and the concentration of soluble Ca2+, Mg2+, and K+. There was a significant effect of the solvent and the soil on the surface layer, with higher concentrations found in the treatments with vinasse and in clayey soil, confirming the potential of vinasse to alter minerals in basalt powder. The resulting levels from the beginning to the end of the experiment suggest that sorption phenomena with neoformed mineral phases or organic acids may have occurred. It may be concluded that the use of rock powder and vinasse mixtures is a promising alternative for soil fertilization and recycling of waste from the sugarcane and mining industries.

The study club program : suggestions relating to courses of study and aids furnished by the Traveling Library, 1909

This leaflet includes information on programs for Women's Clubs. Some possible subjects for the club's discussions are literature, history and fine arts. Several methods of study are covered. Groups are encouraged to use public libraries and the Iowa Traveling Library to obtain reference materials for their topics.

Young innovative firms and R&D strategies: is the Spanish case different?

This paper analyzes the profile of Spanish young innovative companies (YICs) and the determinants of innovation and imitation strategies. The results for an extensive sample of 2,221 Spanish firms studied during the period 2004–2010 show that YICs are found in all sectors, although they are more concentrated in high-tech sectors and, in particular, in knowledge-intensive services (KIS). Three of every four YICs are involved in KIS. Our results highlight that financial and knowledge barriers have much impact on the capacity of young, small firms to innovate and to become YICs, whereas market barriers are not obstacles to becoming a YIC. Public funding, in particular from the European Union, makes it easier for a new firm to become a YIC. In addition, YICs are more likely to innovate than mature firms, although they are more susceptible to sectoral and territorial factors. YICs make more dynamic use of innovation and imitation strategies when they operate in high-tech industries and are based in science parks located close to universities. Keywords: innovation strategies, public innovation policies, barriers to innovation, multinomial probit model. JEL Codes: D01, D22 , L60, L80, O31

Creative and Multidisciplinary Etching in the Digital Age

In our capacity as creative artists, researchers and fine arts professors, most part of our activity focuses on the relationships between people and creativity, technology, and resources, and, most frequently, what we aim to offer are new enjoyable and subversive ways of interacting with these three fields. As art teachers, we ask 'why and how' to teach dynamic bearing in mind that digital technology will undoubtedly impact on contemporary art practice.

Standards and service offshoring in India: Moving beyond industry and institutional specificities

Résumé Cet article examine le rôle joué par les normes internationales techniques dans la mondialisation des activités de service. Différentes approches d'économie considèrent que les spécificités des activités de services sont un frein à leur délocalisation, à leur industrialisation et à leur normalisation. A l'opposé de ces approches centrées sur les spécificités des activités de services, les approches d'économie politique internationale mettent en avant l'existence de configurations conflictuelles de pouvoir à l'oeuvre dans l'internationalisation des activités de services et ce, au-delà des limites sectorielles et nationales. Cet article examine le cas du secteur des centres d'appels et, plus généralement, celui de la sous-traitance des services aux entreprises (BPO) en Inde. Nos résultats suggèrent que les normes techniques sont importantes dans le secteur étudié, alors même que ces types de services sont conventionnellement identifiés comme étant peu susceptibles d'être soumis à des normes. Une perspective d'économie politique sur la normalisation des activités de service souligne comment la problématique du pouvoir investit la normalisation technique d'une dimension plus progressive à travers les thématiques du "travailleur", du "consommateur", ou de "l'environnement". Abstract This paper explores the role of international standards in the much-debated globalisation of the service economy. Various strands of economic analyses consider that core attributes of services affect their ability to be reliably delocalised, industrialised, and standardised. In contrast, international political economy approaches draw attention to power configurations supporting conflicting use of standards across industries and nations. The paper examines the case of the rising Indian service industry in customer centres and business process outsourcing to probe these opposing views. Our findings suggest that standards matter in types of services that conventional economic analyses identify as unlikely to be standardised, and that the standards used in the Indian BPO industry are widely accepted. Despite little conflict in actual definitions of market requirements, an international political economy perspective on service standardisation highlights the importance of potential power issues related to workers', consumers', and environmental concerns likely to be included in more progressive forms of standardisation.

Measuring irregularities and surface defects from printed patterns

Quality inspection and assurance is a veryimportant step when today's products are sold to markets. As products are produced in vast quantities, the interest to automate quality inspection tasks has increased correspondingly. Quality inspection tasks usuallyrequire the detection of deficiencies, defined as irregularities in this thesis. Objects containing regular patterns appear quite frequently on certain industries and science, e.g. half-tone raster patterns in the printing industry, crystal lattice structures in solid state physics and solder joints and components in the electronics industry. In this thesis, the problem of regular patterns and irregularities is described in analytical form and three different detection methods are proposed. All the methods are based on characteristics of Fourier transform to represent regular information compactly. Fourier transform enables the separation of regular and irregular parts of an image but the three methods presented are shown to differ in generality and computational complexity. Need to detect fine and sparse details is common in quality inspection tasks, e.g., locating smallfractures in components in the electronics industry or detecting tearing from paper samples in the printing industry. In this thesis, a general definition of such details is given by defining sufficient statistical properties in the histogram domain. The analytical definition allowsa quantitative comparison of methods designed for detail detection. Based on the definition, the utilisation of existing thresholding methodsis shown to be well motivated. Comparison of thresholding methods shows that minimum error thresholding outperforms other standard methods. The results are successfully applied to a paper printability and runnability inspection setup. Missing dots from a repeating raster pattern are detected from Heliotest strips and small surface defects from IGT picking papers.