Annual CO-emissions of combined pellet and solar heating systems

Emissions are an important aspect of a pellet heating system. High carbon monoxide emissions are often caused by unnecessary cycling of the burner when the burner is operated below the lowest combustion power. Combining pellet heating systems with a solar heating system can significantly reduce cycling of the pellet heater and avoid the inefficient summer operation of the pellet heater. The aim of this paper was to study CO-emissions of the different types of systems and to compare the yearly CO-emissions obtained from simulations with the yearly CO-emissions calculated based on the values that are obtained by the standard test methods. The results showed that the yearly CO-emissions obtained from the simulations are significant higher than the yearly CO-emissions calculated based on the standard test methods. It is also shown that for the studied systems the average emissions under these realistic annual conditions were greater than the limit values of two Eco-labels. Furthermore it could be seen that is possible to almost halve the CO-emission if the pellet heater is combined with a solar heating system.

1987 Yearbook

TOC: Clubs & Organizations…18 / Current Events & Music…30 / Faculty & Staff…33 / Activities & Events… / Honors & Graduation…65 / Graduates…75 / Yearbook Credits…111 / A Thank You…112 YEARBOOK COMMITTEE: Project Director, Vincent Banrey; Asst. Project Director, Catherine Whan; Editors (1986): Maricruz Saunders; (1987): Juan Jimenez, GloryAnn Torres; LAYOUT DESIGNERS: Vincent Banrey, Stephanie Bowen, Yvonne Brown, Jacqui Fernandez, Milton Ferreira, Omar Harris, Cornelius Huskins, Juan Jimenez, Wayne Keane, Richard Massie, Victoria Pamias, Richard Provost, Maricruz Saunders, GloryAnn Torres, Pedro Torres, Joan Walker, Catherine Whan. PHOTOGRAPHERS: John Carrero, Young Baek Choi, Randy Fader-Smith, Milton Ferreira, Roger Ince, Juan Jimenez, Umoja Kwanguvu, Seymour Lerman, Clinton Linton, Richard Provost, Jaidee amsinghani, Maricruz Saunders, Frank Tocco, GloryAnn Torres, Catherine Whan, Alan Young. ARTISTS: Cover Design: Madeline Vega; Endsheets: Oscar "DJ Ozzie" Ramirez; Division Pages: Jose Marti; International LaGuardia: Jacqui Fernandez; Illustrations: Richard Massie, Jacqui Fernandez, Madeline Vega. WRITERS: Yasmin Ahmed, Vincent Banrey, Warren Gardner, Juan Jimenez, Umoja Kwanguvu, Luis Merchant, Victoria Pamias, Richard Provost, Christiana Somerville, GloryAnn Torres, Joan Walker, Catherine Whan. SIGNIFICANT OTHERS: Word Processing: Blanca Arbito, Edward Hollins, Catherine Whan. Vincent Banrey Spread: developed by Blanca Arbito, Edward Hollins and GloryAnn Torres, Jacqui Fernandez, Catherine Whan. Creative Consultant: Edward Hollins. Promotions: George Condors. SPECIAL THANKS TO: Frank and Seymour of Classic Studios; Chuck Lindsey, Photo Workshop Instructor; Ted Schiffman of Taylor Publishing Co.; Dan Horn and Thurston Reyes of LaGuardia Theatre; and the Recreation staff. ALAN BERMAN IN MEMORIAM: Sketch, Tom Fink; Alan Speaking, Brian Gallagher; Remembering Dr. Alan Berman, Tuzyline Allan.

1988 Yearbook

Vol. 7; Sept. 1988; 109 p. b&w, color photographs TOC: Life at LaGuardia…2 / Activities and Events…17 / Faculty and Staff…33 / Activities at LaGuardia…49 / Graduation…71 Yearbook Committee Credits: Faculty Advisor, Vincent Banrey; Project Director, Catherine Whan; Editors: Alexandra Gomez, Juan Jimenez, GloryAnn Torres; Asst. Editor, Kenny Rosa; LAYOUT: Vincent Banrey, Marino "Tito" Cabrera, Shirley Chance, George Condors, Milton Ferreira, Maria Flores, Alexandra Gomez, Ana Lisa Gonzalez, Bernadette Henry, Juan Jimenez, Alejandro Meneses, Richard Provost, Kenny Rosa, Maria Sanchez, GloryAnn Torres, Catherine Whan, Alan O. Young; PHOTOGRAPHY: Peter Abbate, Sandra Acres, Young Baek Choi, Randy Fader Smith, Milton Ferriera, Alexandra Gomez, Juan Jimenez, Seymour Lerman, Chuck Lindsey, Victoria Pamias, Richard Provost, Alan Scribner, Frank Tocco, GloryAnn Torres, Catherine Whan. ART: Jose Marti (Cover Design and Division Pages); Martin Carrichner, Jose Marti (Endsheet Design), Arnold Escalera, Jacqui Fernandez, Richard Massey, Alejandro Meneses; WRITING: Anthony Archer, Alexandra Bastidas, Joie Fadde, Alexandra Gomez, Ana Lisa Gonzalez, Doreen Hansen, Bernadette Henry, Sarah Hudson, Juan Jimenez, Donna Libert, Cathy Passiglia, Jody Pincus, Richard Provost, Kenny Rosa, Maria Sanchez, Alan Scribner, Christiana Sommerville, GloryAnn Torres, Catherine Whan, Alan O. Young; SPECIAL THANKS: Blanca Arbito, Classic Studios, Edward Hollins, Umoja Kwanguvu, Kelly Johnson and the LaGuardia Archives, Andrew Saluga and Recreation Staff, Ted Schiffman of Taylor Publishing.

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals

Preferential infection sites of Cysticercus bovis in cattle experimentally infected with Taenia saginata eggs

The preferential sites of infection of Cysticercus bovis were evaluated in the skeletal muscle and entrails of 25 cattle that were experimentally infected with Taenia saginata (2 x 10(4) eggs). Two other animals were not inoculated (control). Ninety days after inoculation, all the cattle were euthanized. The carcasses were deboned and dissected into 26 anatomical sections (masseter muscles, brain, tongue, esophagus, heart, diaphragm, lungs, liver, kidneys, spleen, top sirloin butt, bottom sirloin butt, outside round, top (inside) round, transversus abdominus, top sirloin cap, strip loin, full tenderloin, eye of round, knuckle, shoulder clod, foreshank, shank, chuck, back ribs, and tail muscles). The dissected tissues were sliced into 5 mm sections. From the 25 cattle, 9258 C. bovis (cysticerci) were recovered; 75.02% (6946) of these were recovered from skeletal muscles and 24.98% (2312) from the entrails. A high parasitism level was found in the shoulder clod (12.55%), heart (11.02%), liver (9.48%), masseter muscles (8.51%), chuck (8.25%), strip loin and full tenderloin (7.26%), knuckle (6.63%), and back ribs (5.53%), totaling 69.23% (5738) of all of the detected cysticerci. on the other hand, there was a low C. bovis parasitism level in the brain, spleen, tail muscles, kidneys, esophagus, and diaphragm, representing just 3.9% of the total number of cysticerci. Given these results, we conclude that specific skeletal musculature regions, such as the shoulder blade, chuck, strip loin and full tenderloin, knuckle, back ribs and top round, which are not officially examined in many countries, are effective sites to efficiently screen C. bovis infection. To date, these regions have not been considered as preferential sites of C. bovis infection. Based on our work, however, these regions deserve greater attention from health inspectors because they contained a greater number of Cysticercus than the other regions of carcasses that are parasitized by T. saginata larvae. (c) 2010 Elsevier Ltd. All rights reserved.

Desempenho de um aquecedor de água a biogás

Estudos foram desenvolvidos para dimensionar e adaptar o injetor do queimador principal de um aquecedor de água tipo acumulação de 75 L. O diâmetro do injetor foi redimensionado em função da pressão de serviço de 100 mm H2O e poder calorífico inferior do biogás de 21.600 kJ m-3 n, garantindo a manutenção da potência calorífica do equipamento de 20.900 kJ h-1. Os resultados demonstraram que o queimador adaptado operou com biogás adequadamente, com chama estável. A eficiência média do aquecedor foi de 68%, para ganho térmico de 36,7 ºC, correspondendo à temperatura final da água igual a 62,7 ºC, sendo consumido 0,796 m³n de biogás, aquecendo 75 L de água em 72 minutos.

Distribution of Taenia saginata metacestodes: a comparison of routine meat inspection and carcase dissection results in experimentally infected calves

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Projeto, construção e análise de eficiência térmica de um sistema de aquecimento solar de água de baixo custo

We studied the feasibility of using a system of Solar Water Heating (SAS) with low cost, for three configurations. In configurations I and II have the collector grid absorber composed of six PVC tubes placed in parallel on the tile cement. In configuration II, the PVC tubes were transparent cover made of plastic bottles. Configuration III uses a collector composed of 12 black HDPE pipes, supported on four cement tiles 2.44 m x 0.50 m, two by two overlapping and interspersed with a filling of glass wool, comprising an area exposed to the global radiation incident of 2.44 m2, with the top two tiles painted matte black. In this configuration, the HDPE pipes replace conventional PVC pipes painted black. The total cost of SAS for configuration III, the most economical, was around $ 150.00. For the configurations tested the system of operation was thermosyphon collector. The study showed that the proposed systems have good thermal efficiency, are easy to install and handle and have low cost compared to conventional.

Estudo de um sistema híbrido de destilação solar para polimento de águas produzidas

The oil industry, experiencing a great economic and environmental impact, has increasingly invested in researches aiming a more satisfactory treatment of its largest effluent, i.e., produced water. These are mostly discarded at sea, without reuse and after a basic treatment. Such effluent contains a range of organic compounds with high toxicity and are difficult to remove, such as polycyclic aromatic hydrocarbons, salts, heavy metals, etc.. The main objective of this work was to study the solar distillation of produced water pre-treated to remove salts and other contaminants trough of a hybrid system with a pre-heater. This developed apparatus was called solar system, which consists of a solar heater and a conventional distillation solar still. The first device consisted of a water tank, a solar flat plate collector and a thermal reservoir. The solar distillator is of simple effect, with 1m2 of flat area and 20° of inclination. This dissertation was divided in five steps: measurements in the solar system, i.e. temperatures and distillate flow rate and weather data; modeling and simulation of the system; study of vapor-liquid equilibrium of the synthetic wastewater by the aqueous solution of p-xylene; physical and chemical analyses of samples of the feed, distillate and residue, as well as climatology pertinent variables of Natal-RN. The solar system was tested separately, with the supply water, aqueous NaCl and synthetic oil produced water. Temperature measurements were taken every minute of the thermal reservoir, water tank and distillator (liquid and vapor phases). Data of solar radiation and rainfall were obtained from INPE (National Institute for Space Research). The solar pre-heater demonstrated to be effective for the liquid systems tested. The reservoir fluid had an average temperature of 58°C, which enabled the feed to be pre-heated in the distillator. The temperature profile in the solar distillator showed a similar behavior to daily solar radiation, with temperatures near 70°C. The distillation had an average yield of 2.4 L /day, i.e., an efficiency of 27.2%. Mathematical modeling aided the identification of the most important variables and parameters in the solar system. The study of the vapor-liquid equilibrium from Total Organic Carbon (TOC) analysis indicated heteroazeotropia and the vapor phase resulted more concentrated in p-xylene. The physical-chemical analysis of pH, conductivity, Total Dissolved Solids (TDS), chlorides, cations (including heavy metals) and anions, the effluent distillate showed satisfactory results, which presents a potential for reuse. The climatological study indicates the region of Natal-RN as favorable to the operation of solar systems, but the use of auxiliary heating during periods of higher rainfall and cloud cover is also recommended

Implementação da técnica de difração de elétrons de baixa energia

The purpose of this study is to describe the implementation of the Low Energy Electron Diffaction (LEED) technique in the Laboratory of Magnetic Nanostructures and Semiconductors of the Department of Theoretical and Experimental Physics of the Universidade Federal do Rio Grande do Norte (UFRN), Natal, Brazil. During this work experimental apparatus were implemented for a complete LEED set-up. A new vacuum system was also set up. This was composed of a mechanical pump, turbomolecular pump and ionic pump for ultra-high vacuum and their respective pressure measurement sensors (Pirani gauge for low vacuum measures and the wide range gauge -WRG); ion cannon maintenance, which is basically mini-sputtering, whose function is sample cleaning; and set-up, maintenance and handling of the quadrupole mass spectrometer, whose main purpose is to investigate gas contamination inside the ultra-high vacuum chamber. It should be pointed out that the main contribution of this Master's thesis was the set-up of the sample heating system; that is, a new sample holder. In addition to the function of sample holder and heater, it was necessary to implement the function of sustaining the ultra-high vacuum environment. This set of actions is essential for the complete functioning of the LEED technique

Desempenho do piauçu (Leporinus macrocephalus) arraçoado com dietas contendo diferentes teores de tanino

Este estudo foi conduzido com o objetivo de avaliar o efeito dos taninos sobre o desempenho produtivo e a composição da carcaça do piauçu. Utilizaram-se 21 aquários (80 L) num sistema de fluxo fechado com circulação continua (vazão de 1 L/min), filtro biológico e temperatura controlada. Empregaram-se 84 peixes com peso médio inicial de 5,06 g, na densidade de quatro por aquário, num delineamento inteiramente casualizado com sete tratamentos e três repetições. As rações foram formuladas de forma a apresentarem-se isoenergéticas (3200 kcal ED/ kg de ração) e isoprotéicas (30% PB), com as seguintes composições de tanino total: 0,00; 0,23; 0,46; 0,69; 0,92; 1,37 e 1,82. Avaliou-se a influência do tanino sobre o desempenho produtivo: ganho de peso, conversão alimentar aparente e taxa de eficiência protéica; a composição corporal dos peixes: proteína bruta da carcaça, extrato etéreo da carcaça, proteína bruta e extrato etéreo dos fígados e gordura visceral; e a relação hepatossomática: índice hepatossomático. Concluiu-se que, embora a presença de até 0,69% de taninos na ração não tenha comprometido os índices de conversão alimentar aparente e taxa de eficiência protéica das rações, níveis iguais ou superiores a 0,46% resultaram em ganho de peso significativamente inferior para o piauçu e que a espécie se mostrou sensível à presença de taninos condensados, os quais prejudicaram significativamente o metabolismo e o valor biológico dos nutrientes presentes nas rações.

Avaliação do desempenho de um aquecedor para aves adaptado para utilizar biogás como combustível

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigation of food grain drying with pulsating air flows

In this article we investigate experimentally the potential of using pulsating flows for drying of food grains. A Rijke type oscillator with an electrical heater was used to dry batches of soybean grains. Drying temperatures were 60 degreesC. We observed a decrease on the drying time for pulsating flows when compared with the conventional non-pulsating regime. This decrease depended on sample initial moisture content and weight, and on final sample moisture content. (C) 2004 Elsevier B.V. Ltd.

Níveis de arraçoamento e freqüência alimentar no desempenho produtivo do acará-bandeira Pterophyllum scalare

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização do prebiótico Flavofeed® como suplemento dietário para juvenis de tilápia do Nilo Oreochromis niloticus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)