Simultaneous determination of gross alpha, gross beta and Ra-226 in natural water by liquid scintillation counting.

The determination of gross alpha, gross beta and 226Ra activity in natural waters is useful in a wide range of environmental studies. Furthermore, gross alpha and gross beta parameters are included in international legislation on the quality of drinking water [Council Directive 98/83/EC].1 In this work, a low-background liquid scintillation counter (Wallac, Quantulus 1220) was used to simultaneously determine gross alpha, gross beta and 226Ra activity in natural water samples. Sample preparation involved evaporation to remove 222Rn and its short-lived decay daughters. The evaporation process concentrated the sample ten-fold. Afterwards, a sample aliquot of 8 mL was mixed with 12 mL of Ultima Gold AB scintillation cocktail in low-diffusion vials. In this study, a theoretical mathematical model based on secular equilibrium conditions between 226Ra and its short-lived decay daughters is presented. The proposed model makes it possible to determine 226Ra activity from two measurements. These measurements also allow determining gross alpha and gross beta simultaneously. To validate the proposed model, spiked samples with different activity levels for each parameter were analysed. Additionally, to evaluate the model's applicability in natural water, eight natural water samples from different parts of Spain were analysed. The eight natural water samples were also characterised by alpha spectrometry for the naturally occurring isotopes of uranium (234U, 235U and 238U), radium (224Ra and 226Ra), 210Po and 232Th. The results for gross alpha and 226Ra activity were compared with alpha spectrometry characterization, and an acceptable concordance was obtained.

Reuse of information for selection of methods and operating conditions for drying of pharmaceutical materials

Drying is a major step in the manufacturing process in pharmaceutical industries, and the selection of dryer and operating conditions are sometimes a bottleneck. In spite of difficulties, the bottlenecks are taken care of with utmost care due to good manufacturing practices (GMP) and industries' image in the global market. The purpose of this work is to research the use of existing knowledge for the selection of dryer and its operating conditions for drying of pharmaceutical materials with the help of methods like case-based reasoning and decision trees to reduce time and expenditure for research. The work consisted of two major parts as follows: Literature survey on the theories of spray dying, case-based reasoning and decision trees; working part includes data acquisition and testing of the models based on existing and upgraded data. Testing resulted in a combination of two models, case-based reasoning and decision trees, leading to more specific results when compared to conventional methods.

An active zone characterized by slow normal faults, the northwestern margin of the València trough (NE Iberia): a review

The northwestern margin of the Valencia trough is an area of low strain characterized by slow normal faults and low to moderate seismicity. Since the mid 1990s this area has been the subject of a number of studies on active tectonic which have proposed different approaches to the location of active faults and to the calculation of the parameters that describe their seismic cycle. Fifty-six active faults have been found and a classification has been made in accordance with their characteristics: a) faults with clear evidence of large paleo-, historic or instrumental earthquakes (2/56); b) faults with evidence of accumulated activity during the Plio-Quaternary and with associated instrumental seismicity (7/56); c) faults with evidence of accumulated activity during the Plio-Quaternary and without associated instrumental seismicity (17/56); d) faults with associated instrumental seismicity and without evidence of accumulated activity during the Plio-Quaternary (30/56), and e) faults without evidence of activity or inactive faults. The parameters that describe the seismic cycle of these faults have been evaluated by different methods that use the geological data obtained for each fault except when paleoseismological studies were available. This classification can be applied to other areas with low slip faults because of the simplicity of the approaches adopted. This study reviews the different approaches proposed and describes the active faults located, highlighting the need a) to better understand active faults in slow strain zones through paleoseismological studies, and b) to include them in seismic hazard studies.

Receiver operating characteristic (ROC) curve for classification of18F-NaF uptake on PET/CT

Abstract Objective: To assess the cutoff values established by ROC curves to classify18F-NaF uptake as normal or malignant. Materials and Methods: PET/CT images were acquired 1 hour after administration of 185 MBq of18F-NaF. Volumes of interest (VOIs) were drawn on three regions of the skeleton as follows: proximal right humerus diaphysis (HD), proximal right femoral diaphysis (FD) and first vertebral body (VB1), in a total of 254 patients, totalling 762 VOIs. The uptake in the VOIs was classified as normal or malignant on the basis of the radiopharmaceutical distribution pattern and of the CT images. A total of 675 volumes were classified as normal and 52 were classified as malignant. Thirty-five VOIs classified as indeterminate or nonmalignant lesions were excluded from analysis. The standardized uptake value (SUV) measured on the VOIs were plotted on an ROC curve for each one of the three regions. The area under the ROC (AUC) as well as the best cutoff SUVs to classify the VOIs were calculated. The best cutoff values were established as the ones with higher result of the sum of sensitivity and specificity. Results: The AUCs were 0.933, 0.889 and 0.975 for UD, FD and VB1, respectively. The best SUV cutoffs were 9.0 (sensitivity: 73%; specificity: 99%), 8.4 (sensitivity: 79%; specificity: 94%) and 21.0 (sensitivity: 93%; specificity: 95%) for UD, FD and VB1, respectively. Conclusion: The best cutoff value varies according to bone region of analysis and it is not possible to establish one value for the whole body.

Venäläisvetoinen yrittäjyys Suomessa

Venäjän maantieteellinen läheisyys ja kasvavat markkinat ovat yhä edelleen tärkeimpiä syitä suomalaisyritysten Venäjä-toiminnoille. Vuorovaikutus rajan yli ei kuitenkaan ole yksipuolista, vaan maantieteellisen läheisyyden vuoksi myös venäläisyritysten voisi olettaa pitävän Suomea luonnollisena vaihtoehtona kansainvälistymiselleen. Suomessa toimivissa venäläisyrityksissä on havaittavissa ominaispiirteitä, jotka erottavat ne kotimaisesta yritystoiminnasta. Samalla kuitenkin venäläisyritysten piirteet eivät ole yhteneviä muualla maailmassa havaittujen etnisten yritysten ominaisuuksien kanssa. Toisin kuin etniset yritykset yleensä, venäläiset yritykset eivät ole syntyneet julkisen tuen avustuksella, eivätkä ne toimi matalan kannattavuuden aloilla. Venäläisen yritystoiminnan rooli on merkittävä Suomen ja Venäjän välisessä kaupassa, ja samalla se tuo lisämausteensa suomalaiseen pienyrityskenttään.

Merchandising Strategies and Retail Performance for Seasonal Fashion Products

This study presents mathematical methods for evaluation of retail performance with special regard to product sourcing strategies. Forecast accuracy, process lead time, offshore / local sourcing mix and up front / replenishment buying mix are defined as critical success factors in connection with sourcing seasonal products with a fashion content. As success measures, this research focuses on service level, lost sales, product substitute percentage, gross margin, gross margin return on inventory and mark down rate. The accuracy of demand forecast is found to be a fundamental success factor. Forecast accuracy depends on lead time. Lead times are traditionally long and buying decisions are made seven to eight months prior to the start of the selling season. Forecast errors cause stockouts and lost sales. Some of the products bought for the selling season will not be sold and have to be marked down and sold at clearance, causing loss of gross margin. Gross margin percentage is not the best tool for evaluating sourcing decisions and in the context of this study gross margin return on inventory, which combines profitability and assets management, is used. The findings of this research suggest that there are more profitable ways of sourcing products than buying them from low cost offshore sources. Mixing up front and inseason replenishment deliveries, especially when point of sale information is used for improving forecast accuracy, results in better retail performance. Quick Response and Vendor Managed Inventory strategies yield better results than traditional up front buying from offshore even if local purchase prices are higher. Increasing the number of selling seasons, slight over buying for the season in order to

Inovação tecnológica e produção no setor químico

Innovation is the main tool for competitiveness and growth in the chemical sector and the main factors for innovation activities in industry as well as the innovation dynamics are discussed in this paper. Success indicators of innovation in Oxiteno are the following: 54% of the current production derives from RD&E projects, 11% of the gross margin in the internal market is due to new products, the company is a technology licensor, holding 17 patents and keeping a strong participation in the production and service sales in the high technology catalysts area, beyond its core petrochemicals and surfactants area.

Reliability of intraoperative ultrasound in margin status assessment in women undergoing breast conserving surgery

Background: Effective treatment for breast cancer requires accurate preoperative planning, developing and implementing a consistent definition of margin clearance, and using tools that provide detailed real-time intraoperative information on margin status. Intraoperative ultrasound (IOUS) may fulfil these requirements and may offer few advantages that other preoperative localization and intraoperative margin assessment techniques may notPurpose: The goal of the present work is to determine how accurate the intraoperative ultrasound should be to acquire complete surgical excision with negative histological margins in patients undergoing Breast Conservative SurgeryDesign: A diagnostic test study with a cross-sectional design carried out in a tertiary referral hospital in Girona within a Breast Pathology UnitParticipants: Women diagnosed with breast cancer undergoing a Breast Conservative Surgery in the Breast Pathology Unit at Hospital Universitari de Girona Dr. Josep Trueta

Treatment of oily wastewater by ultrafiltration: The effect of different operating and solution conditions

In many industries, such as petroleum production, and the petrochemical, metal, food and cosmetics industries, wastewaters containing an emulsion of oil in water are often produced. The emulsions consist of water (up to 90%), oils (mineral, animal, vegetable and synthetic), surfactants and other contaminates. In view of its toxic nature and its deleterious effects on the surrounding environment (soil, water) such wastewater needs to be treated before release into natural water ways. Membrane-based processes have successfully been applied in industrial applications and are considered as possible candidates for the treatment of oily wastewaters. Easy operation, lower cost, and in some cases, the ability to reduce contaminants below existing pollution limits are the main advantages of these systems. The main drawback of membranes is flux decline due tofouling and concentration polarisation. The complexity of oil-containing systems demands complementary studies on issues related to the mitigation of fouling and concentration polarisation in membranebased ultrafiltration. In this thesis the effect of different operating conditions (factors) on ultrafiltration of oily water is studied. Important factors are normally correlated and, therefore, their effect should be studied simultaneously. This work uses a novel approach to study different operating conditions, like pressure, flow velocity, and temperature, and solution properties, like oil concentration (cutting oil, diesel, kerosene), pH, and salt concentration (CaCl2 and NaCl)) in the ultrafiltration of oily water, simultaneously and in a systematic way using an experimental design approach. A hypothesis is developed to describe the interaction between the oil drops, salt and the membrane surface. The optimum conditions for ultrafiltration and the contribution of each factor in the ultrafiltration of oily water are evaluated. It is found that the effect on permeate flux of the various factors studied strongly depended on the type of oil, the type of membrane and the amount of salts. The thesis demonstrates that a system containing oil is very complex, and that fouling and flux decline can be observed even at very low pressures. This means that only the weak form of the critical flux exists for such systems. The cleaning of the fouled membranes and the influence of different parameters (flow velocity, temperature, time, pressure, and chemical concentration (SDS, NaOH)) were evaluated in this study. It was observed that fouling, and consequently cleaning, behaved differently for the studied membranes. Of the membranes studied, the membrane with the lowest propensity for fouling and the most easily cleaned was the regenerated cellulose membrane (C100H). In order to get more information about the interaction between the membrane and the components of the emulsion, a streaming potential study was performed on the membrane. The experiments were carried out at different pH and oil concentration. It was seen that oily water changed the surface charge of the membrane significantly. The surface charge and the streaming potential during different stages of filtration were measured and analysed being a new method for fouling of oil in this thesis. The surface charge varied in different stages of filtration. It was found that the surface charge of a cleaned membrane was not the same as initially; however, the permeability was equal to that of a virgin membrane. The effect of filtration mode was studied by performing the filtration in both cross-flow and deadend mode. The effect of salt on performance was considered in both studies. It was found that salt decreased the permeate flux even at low concentration. To test the effect of hydrophilicity change, the commercial membranes used in this thesis were modified by grafting (PNIPAAm) on their surfaces. A new technique (corona treatment) was used for this modification. The effect of modification on permeate flux and retention was evaluated. The modified membranes changed their pore size around 33oC resulting in different retention and permeability. The obtained results in this thesis can be applied to optimise the operation of a membrane plant under normal or shock conditions or to modify the process such that it becomes more efficient or effective.

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.

Apteekkien kannattavuuden kehittäminen toimintolaskentaa soveltaen

Apteekkiliiketoiminta eroaa tavallisesta liiketoiminnasta erilaisten lakisääteisten velvoitteiden vuoksi. Alan regulaation viimeaikainen kehitys, kuten lääkevaihto, viitehintajärjestelmä sekä näiden tuoma lääkkeiden tiukentunut hintakilpailu, ovat tuoneet haasteita apteekkien kannattavuuteen. Tuotevalikoima- ja varastonhallinta ovat nousseet yhä tärkeämpään rooliin. Tutkimuksen tavoitteena oli kehittää apteekkien kannattavuutta toimintolaskentaa soveltaen. Toimintolaskennalla kahdelle apteekille tuotettiin kustannus- sekä tuotekannattavuustietoa. Tutkimuksen teoreettinen viitekehys koostui toimintolaskennan sekä apteekkiliiketoiminnan aikaisemmasta tutkimuksesta. Tutkimuksesta kävi ilmi, että kummassakin apteekissa oli erittäin laaja tuotesortimentti. Itsehoito- sekä vapaan kaupan tuotteiden tuotesortimenttia järkeistämällä kannattavuutta voitaisiin parantaa. Monesti tuotekategorioissa on useita saamaa vaikuttavaa ainetta sisältävää valmistetta usealta eri toimittajalta mikä heikentää kannattavuutta. Tuloksista kävi ilmi myös, että tulevaisuudessa vapaan kaupan tuotteet tulevat olemaan tärkeässä roolissa, mikä korostaa markkinointi- ja myyntiosaamisen tärkeyttä. Reseptilääkkeissä kate ei näyttäisi kattavan kustannuksia, minkä vuoksi varastonhallintaan on kiinnitettävä huomiota.

BUDDHISM AND MODERNITY: IN THE MARGIN OF DONALD S. LOPEZ JR.'S "BUDDHISM AND SCIENCE

ABSTRACT The present article aims at setting the issue of the relationship between Buddhism and science in a historical and philosophical frame wider than that one taken into account by the international scholarship so far. The historical point of view allows us to conclude that the narrative that connects Buddhism with science is not based on features intrinsic to Buddhist thought. In fact, such narrative prospered thanks to the development of a dialectic, typical of the 18th and 19th centuries, between science and religion. The philosophical point of view allows us to conclude that such narrative is backed by a metaphysical-like thought that denies the specificity of both science and Buddhism.