Digital literacy, technology and social inclusion: making sense of one-to-one computer programmes around the world

This book was produced in the scope of a research project entitled “Navigating with ‘Magalhães’: Study on the Impact of Digital Media in Schoolchildren”. This study was conducted between May 2010 and May 2013 at the Communication and Society Research Centre, University of Minho, Portugal and it was funded by the Portuguese Foundation for Science and Technology (PTDC/CCI-COM/101381/2008).

Foreword [to Digital literacy, technology and social inclusion: making sense of one-to-one computer programmes around the world]

(Excerto) In times past, learning to read, write and do arithmetic was to get on course to earn the “writ of emancipation” in society. These skills are still essential today, but are not enough to live in society. Reading and critically understanding the world we live in, with all its complexity, difficulties and challenges, require not only other skills (learning to search for and validate information, reading with new codes and grammar, etc) but, to a certain extent, also metaskills, matrixes and mechanisms that are transversal to the different and new literacies, are necessary. They are needed not just to interpret but equally to communicate and participate in the little worlds that make up our everyday activities as well as, in a broader sense, in the world of the polis, which today is a global world.

Introduction [to Digital literacy, technology and social inclusion: making sense of one-to-one computer programmes around the world]

This book was produced in the scope of a research project entitled “Navigating with ‘Magalhães’: Study on the Impact of Digital Media in Schoolchildren”. This study was conducted between May 2010 and May 2013 at the Communication and Society Research Centre, University of Minho, Portugal and it was funded by the Portuguese Foundation for Science and Technology (PTDC/CCI-COM/101381/2008). As we shall explain in more detail later in this book, the main objective of that research project was to analyse the impact of the Portuguese government programme named ´e-escolinha´ launched in 2008 within the Technological Plan for Education. This Plan responds to the principles of the Lisbon Strategy signed in 2000 and rereleased in the Spring European Council of 2005.

Tecnología de igy anti-escherichia coli aplicada mediante nanotubos sobre cultivos de enterocitos porcinos. Anti- escherichia coli igy technology applied through nanotubes on porcine enterocyte cultures.

La diarrea neonatal representa uno de los problemas sanitarios de mayor relevancia en las primeras semanas de vida del cerdo. Provoca importantes pérdidas económicas por morbilidad y mortalidad. El cultivo de enterocitos primarios representa una herramienta valiosa para el estudio de patologías causadas por agentes infecciosos que afectan la integridad del epitelio intestinal. La producción de anticuerpos extraídos a partir de la yema de huevo de gallinas inmunizadas (IgY), es una tecnología innovadora, que ha mostrado ser protectiva contra diarreas causadas por agentes víricos y bacterianos. La nanotecnología permite mejorar la eficiencia en la administración de distintas drogas. Los nanotubos de carbono han ganado una enorme popularidad por sus propiedades y aplicaciones únicas. La investigación sobre los aspectos toxicológicos de estas nanopartículas es escasa. Una vez dentro de la célula, las nanopartículas pueden inducir estrés oxidativo intracelular por perturbar el equilibrio oxidativo. Las hipótesis de trabajo es: La administración de IgY anti-Escherichia coli a través de nanotubos protegerá in vitro e in vivo a los enterocitos de una infección por E. coli previniendo la diarrea neonatal porcina. Los objetivos del trabajo son: Evaluar la protección por un anticuerpo aviario IgY anti-E. coli aplicado mediante nanotubos de carbono a cultivo de enterocitos porcinos primarios sometidos a una post-infección con E. coli; Analizar los efectos secundarios de los nanotubos con IgY anti-E coli en la citotoxicidad, el balance oxidativo y la apoptosis de los enterocitos porcinos cultivados in vitro y Evaluar la acción terapeútica de la IgY anti-E coli aplicada a porcinos y efectos secundarios de la administración con nanotubos. Se implementará un diseño experimental in vitro con diferentes grupos de cultivos con nanotubos, con IgY anti-E. coli e inespecifica y con exposición a E. coli. Se realizará cultivo de enterocitos porcinos primarios con una técnica de disgregación enzimática con colagenasa según protocolo de Bader et al. (2000). Se evaluará la viabilidad por la prueba de azul tripan. Para la obtención del anticuerpo anti-E. coli aviario se aplicarán un total de 3 dosis de E. coli (109 UFC/ml de adyuvante) a gallinas Legorhn en condiciones fisiológicas. Se recolectarán los huevos diariamente. Se purificará la IgY según método de Polson et al. (1985) utilizando PEG 6000. La concentración de IgY se medirá por ELISA de alta sensibilidad. La IgY será incorporada a nanotubos según protocolo de Acevedo et al. 2006. Para analizar los posibles efectos secundarios de los nanotubos se evaluará: 1. Citotoxicidad por técnica de MTT 2. Estrés oxidativo por técnica de TBARS y 3. Apoptosis por técnica de TUNEL.Además, se implementará un diseño experimental in vivo para probar la acción terapeútica de este nutraceútico aplicados a lechones destetados y los efectos secundarios de la administración con nanotubos. Se realizará un cultivo de enterocitos de lechones que previamente fueron tratados con la IgY anti-E. coli administrada mediante nanotubos y efectuarán las técnicas descriptas anteriormente. Los resultados esperados son: Elaboración de un Ac aviario IgY anti-E. coli para prevenir infección de enterocitos, Profundización en el conocimiento acerca de los efectos citotóxicos de los nanotubos de carbono multilamelares, Generación de tratamiento alternativo para enfermedades entéricas porcinas.

Training and development in Irish technology companies

The sustained economic growth that has been experienced in the Irish economy in recent years has relied, to a large extent, on the contribution and performance of those industry sectors that possess the ability to provide high-value-added products and services to domestic and international markets. One such contributor has been the Technology sector. However, the performance of this sector relies upon the availability of the necessary capabilities and competencies for Technology companies to remain competitive. The Expert Group on Future Skills Needs have forecasted future skills shortages in this sector. The purpose of this research has been to examine the extent to which Irish Technology companies are taking measures to meet changing skills requirements, through training and development interventions. Survey research methods (in the form of a mail questionnaire, supported by a Web-based questionnaire) have been used to collect information on the expenditure on, and approach to, training and development in these companies, in addition to the methods, techniques and tools/aids that are used to support the delivery of these activities. The contribution of Government intervention has also been examined. The conclusions have been varied. When the activities of the responding companies are considered in isolation, the picture to emerge is primarily positive. Although the expenditure on training and development is slightly lower than that indicated in previous studies, the results vary by company size. Technical employees are clearly the key focus of training provision, while Senior Managers and Directors, Clerical and Administrative staff and Manual workers are a great deal more neglected in training provision. Expenditure on, and use of, computer-based training methods is high, as is the use of most of the specified techniques for facilitating learning. However, when one considers the extent to which external support (in the form of Government interventions and cooperation with other companies and with education and training providers) is integrated into the overall training practices of these companies, significant gaps in practice are identified. The thesis concludes by providing a framework to guide future training and development practices in the Technology sector.

The production of vermicompost from dairy sludge and its value as a plant growth medium

Dairy sludge generated at Glanbia Ingredients Ltd., Kilkenny has up until now been landspread. This study investigated the feasibility of using earthworms to vermicompost the sludge as an alternative method of treatment. It was found that high levels of ammonia in the sludge led to earthworm fatality but that by manually aerating the sludge the ammonia could be volatilised or by adding zeolite the ammonia could be absorbed, thus solving the problem. In a medium scale trial, the earthworm species Dendrobaena veneta and Eisenia fetida dominated the polyculture. Earthworms grew and generated cocoons during vermicomposting. During vermicomposting no leachate was generated. Nutrient changes took place during vermicomposting. There were high levels of nitrate, increased calcium and sulphate in the vermicomposted dairy sludge. The amount of magnesium, potassium and chloride did not change, while phosphate was undetectable after vermicomposting. The levels of nitrate and phosphate were good indicators of the extent of vermicomposting. The vermicomposted dairy sludge provided improved growth and yields of radishes and barley compared to the dairy sludge and control. Compared to the vermicompost, the dairy sludge provided heavier ryegrass yields and more marigolds with larger flower diameters. Generally, it is the amount of phosphate in dairy sludge that dictates how much can be applied as a fertiliser on land. Vermicomposting reduced the amount of phosphate to an undetectable level but on the other hand created a problem of high nitrate levels. In a pot trial with grass grown in vermicompost the nitrate leached from the vermicompost. In field conditions the leaching of nitrate might occur and could cause an increased risk of contamination of groundwater and watercourses.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Recent brazilian experience on farmer reaction and crop response to fertilizer use

(1) In the period 1965/77 fertilizer consumption in Brazil increased nearly fifteen foild from circa 200,000 tons of N + P2O5 + K2O to 3 million tons. During the fifteen years extending from 1950 to 1964 usage of the primary macronutrients was raised by a factor of 2 only. (2) Several explanations are given for the remarkable increase, namely: an experimental background which supplied data for recommendations of rates, time and type of application; a convenient governmental policy for minimum prices and rural credit; capacity of the industry to meet the demand of the fertilizer market; an adequate mechanism for the diffusion of the practice of fertilizer use to the farmer. (3) The extension work, which has caused a permanent change in the aptitude towards fertilization, was carried out in the traditional way by salesmen supported by a technical staff, as well as by agronomists of the official services. (4) Two new programs were started and conducted in a rather short time, both putting emphasis on the relatively new technology of fertilizer use. (5) The first program, conducted in the Southern part of the country, extended lab and green house work supplemented by a few field trials to small land owners - the so called "operação tatú" (operation armadillo). (6) The seconde program, covering a larger problem area in the Northeast and in Central Brazil, began directly in field as thousands of demonstrations and simple experiments with the participation of local people whose involvement was essential for the success of the initiative; in this case the official extension services, both foreign and national sources of funds, and universities did participate under the leadership of the Brazilian Association for the Diffusion of Fertilizers (ANDA). (7) It is felt that the Brazilian experience gained thereof could be useful to other countries under similar conditions.

Reptiles collected in Salvador for the California Institute of Technology, by Karl P. Schmidt.

v.12:no.16(1928)

National Aquaculture Development Plan / prepared by the Joint Subcommittee on Aquaculture of the Federal Coordinating Council on Science, Engineering and Technology.

1