Reavaliação da eficiência de óleo de coco saponificado e de sua microemulsão como inibidores de corrosão em uma célula eletroquímica

An interesting development in surfactants science and technology is their application as corrosion inhibitors, since they act as protective films over anodic and cathodic surfaces. This work aims to investigate the efficiency of saponified coconut oil (SCO) as corrosion inhibitor and of microemulsified system (SCO + butanol + kerosene oil + distilled water), in saline medium, using an adapted instrumented cell, via techniques involving linear polarization resistance (LPR) and mass loss coupons (MLC). For this, curves of efficiency versus SCO concentration (ranging between 0 and 75 ppm) have been constructed. According to the obtained results, the following efficiency levels were reached with OCS: 98% at a 75 ppm concentration via the LPR method and 95% at 75 ppm via the MLC method. The microemulsified system, for a concentration of 15 ppm of SCO, obtained maximum inhibition of 97% (LPR) and 93% (MLC). These data indicate that it is possible to optimize the use of SCO in similar applications. Previous works have demonstrated that maximal efficiencies below 90% are attained, typically 65% as free molecules and 77% in microemulsified medium, via the LPR method in a different type of cell. Therefore, it can be concluded that the adapted instrumented cell (in those used methods) showed to be an important tool in this kind of study and the SCO was shown effective in the inhibition of the metal

Obtenção e aplicação de sistemas microemulsionados na recuperação avançada de petróleo

Due to the need of increasing production in reservoirs that are going through production decline, methods of advanced recovery have frequently been used in the last years, as the use of conventional methods has not been successful in solving the problem of oil drifting. In this work, the efficiency of different microemulsionated systems in the flow of oil from cores from Assu and Botucatu formations. Regarding drifting tests, cores were calcinated at a temperature of 1000°C, for 18 hours, with the aim of eliminating any organic compound present in it, increasing the resultant permeability. Following, the cores were isolated with resin, resulting in test specimens with the following dimensions: 3.8 cm of diameter and 8.7 cm of length. Cores were saturated with brine, composed of aqueous 2 wt % KCl, and oil from Guamaré treatment station (Petrobras/RN). A pressure of 20 psi was used in all tests. After core saturation, brine was injected again, followed by oil at constant flow rate. The system S3 - surfactant (anionic surfactant of short chain), isoamillic alcohol, pine oil, and water - presented the best drift efficiency, 81.18%, while the system S1E commercial surfactant, ethyl alcohol, pine oil, and distilled water presented low drift efficiency, 44,68%

Síntese, caracterização e aplicação do MCM-41 e A1-MCM-41 na pirólise do resíduo atmosférico de petróleo

In present work, mesoporous materials of the M41S family were synthesized, which were discovered in the early 90s by researchers from Mobil Oil Corporation, thus allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal array of mesopores with pore diameters ranging from 2 to 10 nm and a high surface area, enabling it to become very promising for the use as a catalyst in the refining of oil in the catalytic cracking process, since the mesopores facilitate the access of large hydrocarbon molecules, thereby increasing the production of light products, that are in high demand in the market. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more beneficial for application in the petrochemical industry. The mesoporous materials MCM-41 and Al-MCM-41 (ratio Si / Al = 50) were synthesized through the hydrothermal method, starting with silica gel, NaOH and distilled water. CTMABr was used as template, for structural guiding. In Al-MCM-41 the same reactants were used, with the adding of pseudoboehmite (as a source of aluminum) in the synthesis gel. The syntheses were carried out over a period of four days with a daily adjustment of pH. The optimum conditions of calcination for the removal of the organic template (CTMABr) were discovered through TG / DTG and also through analysis by XRD, FTIR and Nitrogen Adsorption. It was found that both the method of hydrothermal synthesis and calcination conditions of the studies based on TG were promising for the production of mesoporous materials with a high degree of hexagonal array. The acidic properties of the materials were determined by desorption of n-butylamine via thermogravimetry. One proved that the addition of aluminum in the structure of MCM-41 promoted an increase in the acidity of the catalyst. To check the catalytic activity of these materials, a sample of Atmospheric Residue (RAT) that is derived from atmospheric distillation of oil from the Pole of Guamaré- RN was used. This sample was previously characterized by various techniques such as Thermogravimetry, FTIR and XRF, where through thermal analysis of a comparative study between the thermal degradation of the RAT, the RAT pyrolysis + MCM-41 and RAT + Al- MCM-41. It was found that the Al-MCM-41 was most satisfactory in the promotion of a catalytic effect on the pyrolysis of the RAT, as the cracking of heavy products in the waste occurred at temperatures lower than those observed for the pyrolysis with MCM-41, and thereby also decreasing the energy of activation for the process and increasing the rates of conversion of residue into lighter products

Hidrólise e caracterização de poliacrilamida hidrofobicamente modificada: avaliação da aplicabilidade na recuperação de petróleo

The hydrolysis reaction in alkaline conditions of the commercial polymer poly(acrylamide-co-metacrylate of 3,5,5-trimethyl-hexane) called HAPAM, containing 0.75 % of hydrophobic groups, was carried out in 0.1 M NaCl and 0.25M NaOH solutions, varying the temperature and reaction time. The polymers were characterized by 1H and 13C Nuclear Magnetic Resonance (NMR), Elemental Analysis and Size Exclusion Chromatography (SEC). The values of the hydrolysis degree were obtained by 13C NMR. The viscosity of HAPAM and HAPAM-10N-R solutions was evaluated as a function of shear rate, ionic strength and temperature. At high polymer concentration (Cp), the viscosity of HAPAM solutions increased with the ionic strength and decreased with the temperature. The viscosity of HAPAM-10N-R solutions increased significantly in distilled water, due to repulsions between the carboxylate groups. At high Cp, with the increase of ionic strength and temperature, occurred a decrease of viscosity, due to mainly the high hydrolysis degree and the low amount of hydrophobic groups. These results indicated that the studied polymers have properties more suitable for the application in Enhanced Oil Recovery (EOR) in low salinity and moderate temperature reservoirs

Estudo da digestão de sedimento de curtume visando a extração do cromo por microemulsão

Leather tanneries generate effluents with high content of heavy metals, especially chromium, which is used in the mineral tanning process. Microemulsions have been studied in the extraction of heavy metals from aqueous solutions. Considering the problems related with the sediment resulting from the tanning process, due to its high content in chromium, in this work this sediment was characterized and microemulsion systems were applied for chromium removal. The extraction process consists in the removal of heavy metal ions present in an aqueous feeding solution (acid digestion solution) by a microemulsion system. First three different solid sludge digestion methods were evaluated, being chosen the method with higher digestion capacity. For this digestion method, seeking its optimization, was evaluated the influence of granule size, temperature and digestion time. Experimental results showed that the method proposed by USEPA (Method A) was the most efficient one, being obtained 95.77% of sample digestion. Regarding to the evaluated parameters, the best results were achieved at 95°C, 14 Mesh granule size, and 60 minutes digestion time. For chromium removal, three microemulsion extraction methods were evaluated: Method 1, in a Winsor II region, using as aqueous phase the acid digestion solution; Method 2, in a Winsor IV region, being obtained by the addition of the acid digestion solution to a microemulsion phase, whose aqueous phase is distilled water, until the formation of Winsor II system; and Method 3, in a Winsor III region, consisting in the formation of a Winsor III region using as aqueous phase the acid digestion solution, diluted in NaOH 0.01N. Seeking to optimize the extraction process only Method 1 (Systems I, II, and VIII) and Method 2 (System IX) were evaluated, being chosen points inside the interest regions (studied domains) to study the influence of contact time and pH in the extraction percentiles. The studied systems present the following compositions: System I: Surfactant Saponified coconut oil, Cosurfactant 1-Butanol, Oil phase Kerosene, Aqueous phase 2% NaCl solution; System II: Aqueous phase Acid digestion solution with pH adjusted using KOH (pH 3.5); System VIII: Aqueous phase - Acid digestion solution (pH 0.06); and System IX Aqueous phase Distilled water (pH 10.24), the other phases of Systems II, VIII and IX are similar to System I. Method 2 showed to be the more efficient one regarding chromium extraction percentile (up to 96.59% - pH 3.5). Considering that with Method 2 the microemulsion region only appears in the Winsor II region, it was studied Method 3 (System X) for the evaluation and characterization of a triphasic system, seeking to compare with a biphases system. System X is composed by: Surfactant Saponified coconut oil, Cosurfactant 1-Butanol, Oil phase Kerosene, Aqueous phase Acid digestion solution diluted with water and with its pH adjusted using 0.01N NaOH solution. The biphasic and triphasic microemulsion systems were analyzed regarding its viscosity, extraction efficiency and drop effective diameter. The experimental results showed that for viscosity studies the obtained values were low for all studied systems, the diameter of the drop is smaller in the Winsor II region, with 15.5 nm, reaching 46.0 nm in Winsor III region, being this difference attributed to variations in system compositions and micelle geometry. In chromium extraction, these points showed similar results, being achieved 99.76% for Winsor II system and 99.62% for Winsor III system. Winsor III system showed to be more efficient due to the obtaining of a icroemulsion with smaller volume, with the possibility to recover the oil phase in excess, and the use of a smaller proportion of surfactant and cosurfactant (C/S)

Síntese, caracterizaçao e propriedades catalicas da peneira molecular nanoestruturada modificada com lantanio

The nanostructured molecular sieve SBA-15 was synthesized by the hydrothermal method, and modified with lanthanum with Si/La molar ratios of 25, 50, 75 and 100. The materials were evaluated as catalysts for the cracking of n-hexane model reaction. Type SBA- 15 and LaSBA-15 mesoporous materials were synthesized using tetraetilortosilicato as a source of silica, hydrochloric acid, heptahydrate lanthanum chloride and distilled water. Pluronic P123 triblock. polymer was used as structure template. The syntheses were carried out by 72 hours. The obtained SBA-15 samples were previously analyzed by thermogravimetry, in order to check the conditions of calcination for removal of organic template. Then, the calcined materials were characterized by X-ray diffraction, infrared spectroscopy, adsorption and desorption of nitrogen, scanning electron microscopy and X-ray microanalysis by dispersive energy. The acidity of the samples was determined using adsorption of n-bulinamina and desorption followed by thermogravimetry. It was found that the hydrothermal synthesis method was suitable for the synthesis of the SBA-15 mesoporous materials, with an excellent degree of hexagonal ordering. The reactions of catalytic cracking of n-hexane were carried out using a fixed bed continuous flow microreactor, coupled on-line to a gas chromatograph. From the catalytic evaluation, it was observed that the mesoporous materials containing lanthanum showed different results for the reaction of cracking of nhexane compared to the unmodified mesoporous material SBA-15. As a result of cracking was obtained as main products hydrocarbons in the range of C1 to C5. The catalyst that showed better properties in relation to the acidity and catalytic activity was LaSBA-15 with the ratio Si/La = 50

Influência da densidade de carga e da massa molar da poliacrilamida na reologia de sistemas microemulsionados

The knowledge of the rheological behavior of microemulsionated systems (SME) is of fundamental importance due to the diversity of industrial applications of these systems. This dissertation presents the rheological behavior of the microemulsionated system formed by RNX 95/alcohol isopropyl/p-toulen sodium sulfonate/kerosene/distilled water with the addition of polyacrylamide polymer. It was chosen three polymers of the polyacrylamide type, which differ in molar weight and charge density. It was studied the addition of these polymers in relatively small concentration 0,1% in mass and maximum concentration of 2,0%. It was made analysis of flow to determine the appearing viscosities of the SME and rheological parameters applying Bingham, Ostwald de Waale and Herschell-Buckley models. The behavior into saline environment of this system was studied for a solution of KCl 2,0%, replacing the distilled water. It was determined the behavior of microemulsions in relation with the temperature through curves of flow in temperatures of 25 to 60ºC in variations of 5ºC. After the analysis of the results the microemulsion without the addition of polymer presented a slight increase in its viscosity, but it does not mischaracterize it as a Newtonian fluid. However the additive systems when analyzed with low concentration of polymer adjusted well to the applied models, with a very close behavior of microemulsion. The higher concentration of the polymer gave the systems a behavior of plastic fluid. The results of the temperature variation point to an increase of viscosity in the systems that can be related to structural changes in the micelles formed in the own microemulsion without the addition of polymer

Avaliação das propriedades físico-químicas de sistemas a base de carboximetilcelulose e poli (N-isopropilacrilamida) em soluções aquosas para aplicação na indústria do petróleo

Sustainable development is a major challenge in the oil industry and has aroused growing interest in research to obtain materials from renewable sources. Carboxymethylcellulose (CMC) is a polysaccharide derived from cellulose and becomes attractive because it is water-soluble, renewable, biodegradable and inexpensive, as well as may be chemically modified to gain new properties. Among the derivatives of carboxymethylcellulose, systems have been developed to induce stimuli-responsive properties and extend the applicability of multiple-responsive materials. Although these new materials have been the subject of study, understanding of their physicochemical properties, such as viscosity, solubility and particle size as a function of pH and temperature, is still very limited. This study describes systems of physical blends and copolymers based on carboxymethylcellulose and poly (N-isopropylacrylamide) (PNIPAM), with different feed percentage compositions of the reaction (25CMC, 50CMC e 75CMC), in aqueous solution. The chemical structure of the polymers was investigated by infrared and CHN elementary analysis. The physical blends were analyzed by rheology and the copolymers by UV-visible spectroscopy, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. CMC and copolymer were assessed as scale inhibitors of calcium carbonate (CaCO3) using dynamic tube blocking tests and chemical compatibility tests, as well as scanning electron microscopy (SEM). Thermothickening behavior was observed for the 50 % CMC_50 % PNIPAM and 25 % CMC_75 % PNIPAM physical blends in aqueous solution at concentrations of 6 and 2 g/L, respectively, depending on polymer concentration and composition. For the copolymers, the increase in temperature and amount of PNIPAM favored polymer-polymer interactions through hydrophobic groups, resulting in increased turbidity of polymer solutions. Particle size decreased with the rise in copolymer PNIPAM content as a function of pH (3-12), at 25 °C. Larger amounts of CMC result in a stronger effect of pH on particle size, indicating pH-responsive behavior. Thus, 25CMC was not affected by the change in pH, exhibiting similar behavior to PNIPAM. In addition, the presence of acidic or basic additives influenced particle size, which was smaller in the presence of the additives than in distilled water. The results of zeta potential also showed greater variation for polymers in distilled water than in the presence of acids and bases. The lower critical solution temperature (LCST) of PNIPAM determined by DLS corroborated the value obtained by UV-visible spectroscopy. SAXS data for PNIPAM and 50CMC indicated phase transition when the temperature increased from 32 to 34 °C. A reduction in or absence of electrostatic properties was observed as a function of increased PNIPAM in copolymer composition. Assessment of samples as scale inhibitors showed that CMC performed better than the copolymers. This was attributed to the higher charge density present in CMC. The SEM micrographs confirmed morphological changes in the CaCO3 crystals, demonstrating the scale inhibiting potential of these polymers

Efeitos alelopáticos de extratos vegetais na germinação, colonização micorrízica e crescimento inicial de milho, soja e feijão

Restos vegetais e liteira podem interferir no desenvolvimento de plantas. Este trabalho objetivou avaliar os efeitos alelopáticos de extratos aquosos de Pinus sp., milheto (Pennisetum americanum (L.) Leeke) e mucuna (Stizolobium aterrimum Piper & Tracy) sobre a germinação, colonização micorrízica e crescimento inicial de milho (Zea mays L.), soja (Glycine max L.) e feijão (Phaseolus vulgaris L.). Os extratos foram elaborados utilizando folhas trituradas. O experimento in vitro empregou papel Germitest umedecido com extratos ou água destilada por sete dias. O experimento em casa de vegetação teve esquema fatorial 3 x 3 x 4, com quatro repetições: três espécies vegetais (soja, milho e feijão), três extratos aquosos (Pinus, milheto e mucuna) e quatro doses de extrato (0,0; 0,5; 1,0; e 2,0 kg L-1). O substrato foi Latossolo Vermelho coletado no município de Selvíria-MS, no bioma Cerrado. Após a semeadura, os vasos receberam, a cada cinco dias, por 45 dias, 50 mL dos extratos. Para a soja, extratos de mucuna e milheto diminuíram o comprimento do hipocótilo e da radícula e os de Pinus aumentaram esses comprimentos. em feijão, o extrato de Pinus diminuiu o comprimento do hipocótilo e da radícula, mas os extratos de mucuna e milheto aumentaram-no. O extrato do milheto reduziu a percentagem e a velocidade de germinação em feijão. Todos os extratos reduziram a colonização micorrízica e o número de esporos de fungos micorrízicos arbusculares em soja, milho e feijão.

Combinations of low doses of unfractionated heparin and of low-molecular-weight heparin prevent experimental venous thrombosis

Synergism between low-molecular-weight heparin and low doses of unfractionated heparin (UH) enhancing anti-factor Xa activity and the release of tissue factor pathway inhibitor was observed. The aim of this study was to verify whether this association is effective in preventing experimental venous thrombosis. Seventy rats were allocated into 7 groups: the control group treated with distilled water, the H-350 group treated with UH 350 IU/kg, the E-2 group treated with enoxaparin 2 mg/kg, the H-175 group treated with UH 175 IU/kg, the E-1 group treated with enoxaparin 1 mg/kg, the H-175 + E-1 group treated with UH 175 IU/kg plus enoxaparin 1 mg/kg, and the H-100 + E-0.5 group treated with UH 100 IU/kg plus enoxaparin 0.5 mg/kg. Forty minutes after subcutaneous injection, thrombosis was induced in vena cava. Three hours later, if present, thrombi were withdrawn and weighed. Bleeding time, activated partial thromboplastin time, thrombin time (TT), and anti-factor Xa were measured at the beginning and end of the experiment. Fortyeight other animals were treated, but without inducing thrombus, and tests were performed 40 min after injection. Thrombus developed in 90.9% of control animals, 20% of the H-350 group, 22.2% of the E-2 group, 10% of the H-175 + E-1 group, and 30% of the H-100 + E-0.5 group; there was a difference between group C and the other groups. Only in the H-350 and H-175 + E-1 groups were TT and activated partial thromboplastin time prolonged in relation to control at the end of the experiment. Forty minutes after injection, TT was prolonged in the H-350 and H-175 + E-1 groups. In conclusion, combinations of low doses of low-molecular-weight heparin and low doses of UH were as effective as high doses of each one used alone in preventing thrombus development in rat vena cava. Copyright (c) 2005 S. Karger AG, Basel.

Morphological and functional evaluation of distal esophagus of rabbits submitted to esophageal infusion with caustic soda

A ingestão de substâncias cáusticas constitui importante situação de emergência, tendo em vista a gravidade de suas seqüelas. OBJETIVO: Estudar as alterações morfológicas e funcionais do esôfago de coelhos submetidos à infusão esofágica com soda cáustica (NaOH). MÉTODOS: 88 coelhos foram divididos em 4 grupos: G1 (n=22) foi submetido à infusão esofágica com água destilada; G2, G3 e G4 foram submetidos a infusão esofágica com NaOH a 2%, 4% e 6%, respectivamente. Alterações morfológicas foram estudadas em 12 animais de cada grupo e as alterações manométricas, nos 10 animais restantes. Foram feitas análises do esfíncter inferior do esôfago (EIE), número e amplitude das contrações no terço distal do esôfago. Estes estudos foram realizados antes (momento 1 - M1) e aos 30 minutos, 6 horas e 24 horas após a infusão esofágica (momentos M2, M3 e M4, respectivamente). RESULTADOS: Avaliação macroscópica: G1 - sem alterações; G2 - edema, hiperemia e descamação; G3 - aumento do calibre do esôfago, úlceras, descamação da mucosa; G4 - lesões semelhantes as do G3, porém mais intensas, áreas de extensa hemorragia. Avaliação funcional: a pressão no EIE foi mais elevada em M2 no grupo 2; o número das contrações no terço distal do esôfago foi menor em G3 e G4, e a amplitude das contrações foi menor em G4. CONCLUSÕES: 1) a infusão esofágica com NaOH constitui excelente modelo experimental de esofagite cáustica no coelho; 2) a infusão esofágica com NaOH causa lesões na parede do esôfago, com gravidade proporcional a concentração da solução; 3) a infusão causou espasmo do EIE em M2 e redução do número e amplitude das contrações no terço distal do esôfago.

Efeito da heparina sódica e da enoxaparina na consolidação de fratura da tíbia no rato: avaliação clínica e anatomopatológica e biomecânica

Foi realizado estudo experimental em ratos para avaliar o efeito do anticoagulante na consolidação óssea, conforme critérios clínicos, anatomopatológicos e biomecânicos. Manualmente, após perfuração do osso, foi produzida fratura aberta, na diáfise da tíbia direita, mantida sem imobilização, em 72 ratos machos da linhagem Wistar, com 60 dias de idade e peso médio de 242 gramas. Doze horas após a fratura, foi iniciado tratamento anticoagulante, mantido por 28 dias. Via subcutânea, um grupo recebeu heparina sódica na dose de 200UI/Kg de 12 em 12 horas, enquanto outro, recebeu enoxaparina na dose de 1mg/Kg de 12 em 12 horas, doses preconizadas para tratamento do tromboembolismo em humanos. O terceiro grupo, controle, recebeu água destilada. Durante o experimento, os animais foram avaliados clinicamente e após 28 dias, sacrificados. Nos animais dos três grupos, a evolução clínica foi semelhante. Mediante análise anatomopatológica efetuada por estudo descritivo e quantitativo, foi observada presença de fibrose, cartilagem e osso igualmente nos três grupos, sempre com predomínio de tecido ósseo. O estudo biomecânico, realizado por intermédio de ensaios de flexão, demonstrou coeficiente de rigidez e carga máxima semelhantes nos três grupos. Nenhuma diferença clínica, anatomopatológica e biomecânica foi encontrada, resultando todas as fraturas em consolidação de acordo com os critérios adotados, concluindo-se, portanto, que a heparina sódica e a enoxaparina nas doses, via e tempo de administração utilizados não interfiriram na consolidação da fratura da tíbia do rato.

Eletromanometria do esfíncter superior do esôfago antes e após perfusão esofágica com ácido clorídrico 0,1N: estudo experimental no cão

Racional — A resposta do esfíncter esofágico superior ao refluxo gastroesofágico é controvertida. A perfusão esofágica com ácido clorídrico é modelo de estudo da ação do ácido o componente mais agressivo do refluxo sobre o esfíncter. Objetivos - Estudar o efeito da acidificação esofágica sobre o esfíncter esofágico superior através da eletromanometria esofágica. - Material e Métodos - em 30 cães adultos de ambos os sexos foram registrados estudos eletromanométricos do esôfago. A técnica utilizada foi a de puxada intermitente da sonda e perfusão contínua dos cateteres com água destilada. Estes exames permitiram as medidas da amplitude da pressão (mm Hg) e do comprimento (cm) do esfíncter superior do esôfago em condições basais (momento 1). Após esta fase, os animais foram submetidos a perfusão esofágica e divididos em 3 grupos de 10, na dependência da solução utilizada na perfusão e do momento do estudo: Grupo 1: perfusão esofágica com água destilada e estudos eletromanométricos realizados aos 15 minutos (momento 2) e 30 minutos (momento 3) do término da perfusão; Grupo 2: perfusão esofágica com HCl 0,1 N e estudos eletromanométricos realizados 15 minutos após o término da perfusão (momento 2); Grupo 3: perfusão esofágica com HCl 0,1 N e estudos eletromanométricos realizados 30 minutos após o término da perfusão (momento 3). Resultados/Conclusão - Os resultados observados permitiram concluir que a acidificação do esôfago não provocou alterações significativas sobre a amplitude de pressão e comprimento do esfíncter superior do esôfago.

Efeito do ácido zoledrônico em tíbias de ratas ooforectomizadas: estudo prospectivo e randomizado

OBJETIVO: Investigar as repercussões clínicas, biomecânicas e histomorfométricas do ácido zoledrônico em tíbias de ratas osteoporóticas, após ooforectomia bilateral. MÉTODOS: Foram estudadas, prospectivamente, 40 ratas da linhagem Wistar (Rattus novergicus albinus). Com 60 dias de vida, os animais foram aleatorizados em dois grupos de acordo com o procedimento cirúrgico: ooforectomia bilateral (O) (n=20) e pseudo-cirurgia (sham) (P) (n=20). Após 30 dias, os animais foram divididos em quatro subgrupos, de acordo com a administração de 0,1mg/kg de ácido zoledrônico (AZ) ou água destilada (AD): OAZ (n=10), OAD (n=10), PAZ (n=10) e PAD (n=10). Após 12 meses, os animais foram eutanasiados e suas tíbias analisadas. No estudo clínico foi considerado o peso dos animais; no estudo biomecânico foram realizados ensaios compressivos e na análise histomorfométrica foi determinada a área trabecular óssea. RESULTADOS: Os grupos O tiveram aumento de peso significativamente maior que os grupos P (p=0,005). Os grupos OAZ e PAZ tiveram aumento, não significativo, de peso quando comparados aos grupos OAD (p=0,47) e PAD (p=0,68). Os grupos com ácido zoledrônico e com água destilada suportaram carga máxima, semelhante (p=0,2), no momento em que ocorreu fratura. Nos grupos com ácido zoledrônico verificou-se o aumento não significante da área trabecular óssea quando comparados aos grupos com água destilada (p=0,21). Houve correlação positiva entre a área trabecular e a carga máxima (p=0,04; r=0,95). CONCLUSÃO: O ácido zoledrônico não influiu significativamente no peso dos animais. Os resultados mostraram aumento, não significante, tanto da resistência óssea diafisária tibial, como da área trabecular óssea.

Lack of effect of prior treatment with fluoride on genotoxicity of two chemical agents in vitro

The goal of this study was to investigate the ability of fluoride to modulate the genotoxic effects induced by the oxidative agent hydrogen peroxide (H2O2) and the alkylating agent methyl methanesulfonate (MMS) in vitro by the single-cell gel ( comet) assay. Chinese hamster ovary cells were exposed in culture for 1 h at 37 degrees C to sodium fluoride at 7-100 mu g/ml. NaF-treated and control cells were then incubated with 0-10 mu M MMS in phosphate-buffered saline (PBS) for 15 min at 37 degrees C, or 7-100 mu M H2O2 in distilled water for 5 min on ice. Negative control cells were treated with PBS for 1 h at 37 degrees C. Clear concentration-related effects were observed for the two genotoxins. Increase of DNA damage induced by either MMS or H2O2 was not significantly altered by pretreatment with NaF. The data indicate that NaF does not modulate alkylation-induced genotoxicity or oxidative DNA damage as measured by the single-cell gel ( comet) assay. Copyright (c) 2007 S. Karger AG, Basel