Personalização e previsibilidade do sorriso digital smile design

A estética é algo que interfere no bem-estar das pessoas e o sorriso não é excepção, sendo até considerado um factor estético essencial nos dias de hoje, perante uma sociedade cada vez mais exigente relativamente aos padrões de beleza. A área da estética dentária, encontra-se em constantes mudanças devido à evolução da qualidade dos materiais e das técnicas utilizadas, levando a melhorias na reprodução das características naturais dos dentes. O médico dentista tem a responsabilidade de adquirir conhecimento e habilidades profissionais para a elaboração de tratamentos estéticos dentários que satisfaçam as expectativas dos pacientes quanto ao seu sorriso. Actualmente, o médico dentista possui várias opções para planear os tratamentos, entre as quais, o planeamento digital através do Digital Smile Design. O Digital Smile Design (DSD), criado pelo Doutor Christian Coachman, veio responder à procura elevada por tratamentos cada vez mais personalizados por parte dos pacientes. O DSD amplia a visão relativamente aos diagnósticos, melhora a comunicação entre as diferentes especialidades na área da medicina dentária e cria planos previsíveis durante o tratamento dentário. Trata-se de um programma onde são trabalhadas imagens fotográficas do paciente para a elaboração de um tratamento estético que responda as necessidades biológicas, funcionais e emocionais do paciente. Este poderá acompanhar e visualizar todos os passos do tratamento e deste modo, torna-se parte integrante do processo. O paciente expressa a sua opinião e as suas expectativas quanto ao resultado final. Neste trabalho realizou-se uma revisão narrativa da literatura sobre a técnica Digital Smile Design utilizando as palavras-chaves: Digital Smile Design; Visagism; dental planning; meaning of smile; mock-up. Os objetivos deste trabalho foi o de conhecer a técnica Digital Smile Design, os princípios do visagismo e a importância do planeamento nestes contextos. O sucesso de um tratamento está dependente de um correcto planeamento e de uma execução clínica e laboratorial cuidadosa.

The Proces of Curriculum and Module Design

The outcome of the inductive decision -making process of the leading project management group (PMG) was the proposal to develop three modules, Human Resource Management and Knowledge Management, Quality Management and Intercultural management, each for 10 ECTS credits. As a result of the theoretical and organisational framework and analytical phase of the project, four strategies informed the development and implemen- tation of the modules: 1. Collaboration as a principle stemming from EU collaborative policy and receiving it’s expression on all implementation levels (designing the modules, modes of learning, delivering the modules, evaluation process). 2. Building on the Bologna process masters level framework to assure ap- propriate academic level of outputs. 3. Development of value -based leadership of students through transforma- tional learning in a cross -cultural setting and continual reflection of theory in practice. 4. Continual evaluation and feedback among teachers and students as a strategy to achieve a high quality programme. In the first phase of designing the modules the collaborative strategy in particular was applied, as each module was led by one university, but members from all other universities participated in the discussions and development of the mod- ules. The Bologna process masters level framework and related standards and guidelines informed the form and method of designing the modules.

Powertrain Architectures and Technologies for New Emission and Fuel Consumption Standards

New powertrain design is highly influenced by CO2 and pollutant limits defined by legislations, the demand of fuel economy in for real conditions, high performances and acceptable cost. To reach the requirements coming from both end-users and legislations, several powertrain architectures and engine technologies are possible (e.g. SI or CI engines), with many new technologies, new fuels, and different degree of electrification. The benefits and costs given by the possible architectures and technology mix must be accurately evaluated by means of objective procedures and tools in order to choose among the best alternatives. This work presents a basic design methodology and a comparison at concept level of the main powertrain architectures and technologies that are currently being developed, considering technical benefits and their cost effectiveness. The analysis is carried out on the basis of studies from the technical literature, integrating missing data with evaluations performed by means of powertrain-vehicle simplified models, considering the most important powertrain architectures. Technology pathways for passenger cars up to 2025 and beyond have been defined. After that, with support of more detailed models and experimentations, the investigation has been focused on the more promising technologies to improve internal combustion engine, such as: water injection, low temperature combustions and heat recovery systems.

A study of the role of a technology-enhanced learning implementation group in mediating an institutional VLE minimum standards policy

Recent years have seen a focus on responding to student expectations in higher education. As a result, a number of technology-enhanced learning (TEL) policies have stipulated a requirement for a minimum virtual learning environment (VLE) standard to provide a consistent student experience. This paper offers insight into an under-researched area of such a VLE standard policy development using a case study of one university. With reference to the implementation staircase model, this study takes cue from the view that an institutional VLE template can affect lower levels directly, sidestepping the chain in the implementation staircase. The Group's activity whose remit is to design and develop a VLE template, therefore, becomes significant. The study, drawing on activity theory, explores the mediating role of such a Group. Factors of success and sources of tension are analysed to understand the interaction between the individuals and the collective agency of Group members. The paper identifies implications to practice for similar TEL development projects. Success factors identified demonstrated the importance of good project management principles, establishing clear rules and division of labour for TEL development groups. One key finding is that Group members are needed to draw on both different and shared mediating artefacts, supporting the conclusion that the nature of the group's composition and the situated expertise of its members are crucial for project success. The paper's theoretical contribution is an enhanced representation of a TEL policy implementation staircase.

Development and characterization of cutting-edge equipment for EMC measurements and advanced power line filter design

This Doctoral Thesis aims at studying, developing, and characterizing cutting edge equipment for EMC measurements and proposing innovative and advanced power line filter design techniques. This document summarizes a three-year work, is strictly industry oriented and relies on EMC standards and regulations. It contains the main results, findings, and effort with the purpose of bringing innovative contributions at the scientific community. Conducted emissions interferences are usually suppressed with power line filters. These filters are composed by common mode chokes, X capacitors and Y capacitors in order to mitigate both the differential mode and common mode noise, which compose the overall conducted emissions. However, even at present days, available power line filter design techniques show several disadvantages. First of all, filters are designed to be implemented in ideal 50 Ω systems, condition which is far away from reality. Then, the attenuation introduced by the filter for common or differential mode noise is analyzed independently, without considering the possible mode conversion that can be produced by impedance mismatches, or asymmetries in either the power line filter itself or the equipment under test. Ultimately, the instrumentation used to perform conducted emissions measurement is, in most cases, not adequate. All these factors lead to an inaccurate design, contributing at increasing the size of the filter, making it more expensive and less performant than it should be.

Web Component per un Design System: un caso di studio aziendale

I contenuti e i servizi offerti dal Web hanno subito negli anni una costante e continua evoluzione, dovuti alla maggiore disponibilità di dispositivi in grado di navigarlo. Oggi i requisiti e le aspettative che gli utenti hanno nei confronti delle applicazioni Web sono sempre maggiori, desiderano un accesso ai contenuti sempre più rapido, interfacce semplici e facili da usare, oltre che reattive, e che tali contenuti siano accessibili da una vasta gamma di dispositivi che presentino sempre più funzionalità. Le aziende devono essere pronte a rispondere a queste esigenze e a fornire agli utenti finali la miglior esperienza possibile, rimanendo aggiornati sulle tecnologie per la creazione di applicazioni Web. Questo è ancora più importante per un'azienda possiede più prodotti, sviluppati da team diversi che usano tecnologie diverse. Per alcune aziende è importante che i propri prodotti, sebbene trattino tematiche differenti, si presentino con interfacce che rimandino al proprio marchio, non solo grazie al nome o al logo, quanto più nei componenti utilizzati per creare le interfacce. Succede così che i vari team devono progettare e sviluppare i componenti nella propria tecnologia, in modo che abbiano le stesse funzionalità, stesso stile e stesso comportamento in ogni situazione. Il più delle volte questo è difficile da realizzare e anche costoso da mantenere. Riuscire a centralizzare lo sviluppo di questi elementi in un unico punto aiuta l'azienda a mantenere bassi i costi di manutenzione e a rendere omogenea l'esperienza degli utenti tra i vari prodotti. Obiettivo del lavoro svolto è illustrare le potenzialità e l'utilità fornite dall'introduzione di una suite di componenti personalizzati, seguendo lo standard dei Web Component, all'interno dei prodotti forniti da una grande impresa. L'analisi si concentra sulll'esperienza di chi utilizza tali componenti all'interno dei propri progetti per creare l'interfaccia utente da presentare poi agli utenti finali.

Design and Characterization of an Active Three-Phase EMI Noise Separator for Three-Phase Power Electronics Systems

One of the major issues for power converters that are connected to the electric grid are the measurement of three phase Conduced Emissions (CE), which are regulated by international and regional standards. CE are composed of two components which are Common Mode (CM) noise and Differential Mode (DM) noise. To achieve compliance with these regulations the Equipment Under Test (EUT) includes filtering and other electromagnetic emission control strategies. The separation of differential mode and common mode noise in Electromagnetic Interference (EMI) analysis is a well-known procedure which is useful especially for the optimization of the EMI filter, to improve the CM or DM attenuation depending on which component of the conducted emissions is predominant, and for the analysis and the understanding of interference phenomena of switched mode power converters. However, separating both components is rarely done during measurements. Therefore, in this thesis an active device for the separation of the CM and DM EMI noise in three phase power electronic systems has been designed and experimentally analysed.

Design, Synthesis And Biological Evaluation Of Hybrid Bioisoster Derivatives Of N-acylhydrazone And Furoxan Groups With Potential And Selective Anti-trypanosoma Cruzi Activity.

Hybrid bioisoster derivatives from N-acylhydrazones and furoxan groups were designed with the objective of obtaining at least a dual mechanism of action: cruzain inhibition and nitric oxide (NO) releasing activity. Fifteen designed compounds were synthesized varying the substitution in N-acylhydrazone and in furoxan group as well. They had its anti-Trypanosoma cruzi activity in amastigotes forms, NO releasing potential and inhibitory cruzain activity evaluated. The two most active compounds (6, 14) both in the parasite amastigotes and in the enzyme contain the nitro group in para position of the aromatic ring. The permeability screening in Caco-2 cell and cytotoxicity assay in human cells were performed for those most active compounds and both showed to be less cytotoxic than the reference drug, benznidazole. Compound 6 was the most promising, since besides activity it showed good permeability and selectivity index, higher than the reference drug. Thereby the compound 6 was considered as a possible candidate for additional studies.

Study Of The Homogeneity Of Drug Loaded In Polymeric Films Using Near-infrared Chemical Imaging And Split-plot Design.

Split-plot design (SPD) and near-infrared chemical imaging were used to study the homogeneity of the drug paracetamol loaded in films and prepared from mixtures of the biocompatible polymers hydroxypropyl methylcellulose, polyvinylpyrrolidone, and polyethyleneglycol. The study was split into two parts: a partial least-squares (PLS) model was developed for a pixel-to-pixel quantification of the drug loaded into films. Afterwards, a SPD was developed to study the influence of the polymeric composition of films and the two process conditions related to their preparation (percentage of the drug in the formulations and curing temperature) on the homogeneity of the drug dispersed in the polymeric matrix. Chemical images of each formulation of the SPD were obtained by pixel-to-pixel predictions of the drug using the PLS model of the first part, and macropixel analyses were performed for each image to obtain the y-responses (homogeneity parameter). The design was modeled using PLS regression, allowing only the most relevant factors to remain in the final model. The interpretation of the SPD was enhanced by utilizing the orthogonal PLS algorithm, where the y-orthogonal variations in the design were separated from the y-correlated variation.

Doehlert Design-desirability Function Multi-criteria Optimal Separation Of 17 Phenolic Compounds From Extra-virgin Olive Oil By Capillary Zone Electrophoresis.

In Brazil, the consumption of extra-virgin olive oil (EVOO) is increasing annually, but there are no experimental studies concerning the phenolic compound contents of commercial EVOO. The aim of this work was to optimise the separation of 17 phenolic compounds already detected in EVOO. A Doehlert matrix experimental design was used, evaluating the effects of pH and electrolyte concentration. Resolution, runtime and migration time relative standard deviation values were evaluated. Derringer's desirability function was used to simultaneously optimise all 37 responses. The 17 peaks were separated in 19min using a fused-silica capillary (50μm internal diameter, 72cm of effective length) with an extended light path and 101.3mmolL(-1) of boric acid electrolyte (pH 9.15, 30kV). The method was validated and applied to 15 EVOO samples found in Brazilian supermarkets.

Design And Synthesis Of N-acylated Aza-goniothalamin Derivatives And Evaluation Of Their In Vitro And In Vivo Antitumor Activity.

Herein we describe the synthesis of a focused library of compounds based on the structure of goniothalamin (1) and the evaluation of the potential antitumor activity of the compounds. N-Acylation of aza-goniothalamin (2) restored the in vitro antiproliferative activity of this family of compounds. 1-(E)-But-2-enoyl-6-styryl-5,6-dihydropyridin-2(1H)-one (18) displayed enhanced antiproliferative activity. Both goniothalamin (1) and derivative 18 led to reactive oxygen species generation in PC-3 cells, which was probably a signal for caspase-dependent apoptosis. Treatment with derivative 18 promoted Annexin V/7-aminoactinomycin D double staining, which indicated apoptosis, and also led to G2 /M cell-cycle arrest. In vivo studies in Ehrlich ascitic and solid tumor models confirmed the antitumor activity of goniothalamin (1), without signs of toxicity. However, derivative 18 exhibited an unexpectedly lower in vivo antitumor activity, despite the treatments being administered at the same site of inoculation. Contrary to its in vitro profile, aza-goniothalamin (2) inhibited Ehrlich tumor growth, both on the ascitic and solid forms. Our findings highlight the importance of in vivo studies in the search for new candidates for cancer treatment.

Use Of Experimental Design To Optimize A Triple-potential Waveform To Develop A Method For The Determination Of Streptomycin And Dihydrostreptomycin In Pharmaceutical Veterinary Dosage Forms By Hplc-pad.

An HPLC-PAD method using a gold working electrode and a triple-potential waveform was developed for the simultaneous determination of streptomycin and dihydrostreptomycin in veterinary drugs. Glucose was used as the internal standard, and the triple-potential waveform was optimized using a factorial and a central composite design. The optimum potentials were as follows: amperometric detection, E1=-0.15V; cleaning potential, E2=+0.85V; and reactivation of the electrode surface, E3=-0.65V. For the separation of the aminoglycosides and the internal standard of glucose, a CarboPac™ PA1 anion exchange column was used together with a mobile phase consisting of a 0.070 mol L(-1) sodium hydroxide solution in the isocratic elution mode with a flow rate of 0.8 mL min(-1). The method was validated and applied to the determination of streptomycin and dihydrostreptomycin in veterinary formulations (injection, suspension and ointment) without any previous sample pretreatment, except for the ointments, for which a liquid-liquid extraction was required before HPLC-PAD analysis. The method showed adequate selectivity, with an accuracy of 98-107% and a precision of less than 3.9%.

Effectiveness of a new toothbrush design versus a conventional tongue scraper in improving breath odor and reducing tongue microbiota

For centuries, specific instruments or regular toothbrushes have routinely been used to remove tongue biofilm and improve breath odor. Toothbrushes with a tongue scraper on the back of their head have recently been introduced to the market. The present study compared the effectiveness of a manual toothbrush with this new design, i.e., possessing a tongue scraper, and a commercial tongue scraper in improving breath odor and reducing the aerobic and anaerobic microbiota of tongue surface. The evaluations occurred at 4 moments, when the participants (n=30) had their halitosis quantified with a halimeter and scored according to a 4-point scoring system corresponding to different levels of intensity. Saliva was collected for counts of aerobic and anaerobic microorganisms. Data were analyzed statistically by Friedman's test (p<0.05). When differences were detected, the Wilcoxon test adjusted for Bonferroni correction was used for multiple comparisons (group to group). The results confirmed the importance of mechanical cleaning of the tongue, since this procedure provided an improvement in halitosis and reduction of aerobe and anaerobe counts. Regarding the evaluated methods, the toothbrush's tongue scraper and conventional tongue scraper had a similar performance in terms of breath improvement and reduction of tongue microbiota, and may be indicated as effective methods for tongue cleaning.

Influence of specimens' design and manufacturing process on microtensile bond strength to enamel: laboratory and FEA comparison

This study evaluated the effect of specimens' design and manufacturing process on microtensile bond strength, internal stress distributions (Finite Element Analysis - FEA) and specimens' integrity by means of Scanning Electron Microscopy (SEM) and Laser Scanning Confocal Microscopy (LCM). Excite was applied to flat enamel surface and a resin composite build-ups were made incrementally with 1-mm increments of Tetric Ceram. Teeth were cut using a diamond disc or a diamond wire, obtaining 0.8 mm² stick-shaped specimens, or were shaped with a Micro Specimen Former, obtaining dumbbell-shaped specimens (n = 10). Samples were randomly selected for SEM and LCM analysis. Remaining samples underwent microtensile test, and results were analyzed with ANOVA and Tukey test. FEA dumbbell-shaped model resulted in a more homogeneous stress distribution. Nonetheless, they failed under lower bond strengths (21.83 ± 5.44 MPa)c than stick-shaped specimens (sectioned with wire: 42.93 ± 4.77 MPaª; sectioned with disc: 36.62 ± 3.63 MPa b), due to geometric irregularities related to manufacturing process, as noted in microscopic analyzes. It could be concluded that stick-shaped, nontrimmed specimens, sectioned with diamond wire, are preferred for enamel specimens as they can be prepared in a less destructive, easier, and more precise way.

Design, construction and evaluation of a simple pressurized solvent extraction system

This work describes the construction and testing of a simple pressurized solvent extraction (PSE) system. A mixture of acetone:water (80:20), 80 ºC and 103.5 bar, was used to extract two herbicides (Diuron and Bromacil) from a sample of polluted soil, followed by identification and quantification by high-performance liquid chromatography coupled with diode array detector (HPLC-DAD). The system was also used to extract soybean oil (70 ºC and 69 bar) using pentane. The extracted oil was weighed and characterized through the fatty acid methyl ester analysis (myristic (< 0.3%), palmitic (16.3%), stearic (2.8%), oleic (24.5%), linoleic (46.3%), linolenic (9.6%), araquidic (0.3%), gadoleic (< 0.3%), and behenic (0.3%) acids) using high-resolution gas chromatography with flame ionization detection (HRGC-FID). PSE results were compared with those obtained using classical procedures: Soxhlet extraction for the soybean oil and solid-liquid extraction followed by solid-phase extraction (SLE-SPE) for the herbicides. The results showed: 21.25 ± 0.36% (m/m) of oil in the soybeans using the PSE system and 21.55 ± 0.65% (m/m) using the soxhlet extraction system; extraction efficiency (recovery) of herbicides Diuron and Bromacil of 88.7 ± 4.5% and 106.6 ± 8.1%, respectively, using the PSE system, and 96.8 ± 1.0% and 94.2 ± 3.9%, respectively, with the SLP-SPE system; limit of detection (LOD) and limit of quantification (LOQ) for Diuron of 0.012 mg kg-1 and 0.040 mg kg-1, respectively; LOD and LOQ for Bromacil of 0.025 mg kg-1 and 0.083 mg kg-1, respectively. The linearity used ranged from 0.04 to 1.50 mg L-1 for Diuron and from 0.08 to 1.50 mg L-1 for Bromacil. In conclusion, using the PSE system, due to high pressure and temperature, it is possible to make efficient, fast extractions with reduced solvent consumption in an inert atmosphere, which prevents sample and analyte decomposition.