SiC Multilayer Structures as Light Controlled Photonic Active Filters

Tunable wavelength division multiplexing converters based on amorphous SiC multilayer photonic active filters are analyzed. The configuration includes two stacked p-i-n structures (p(a-SiC:H)-i'(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts. The manipulation of the magnitude is achieved through appropriated front and back backgrounds. Transfer function characteristics are studied both theoretically and experimentally. An algorithm to decode the multiplex signal is established. An optoelectronic model supports the optoelectronic logic architecture. Results show that the light-activated device combines the demultiplexing operation with the simultaneous photodetection and self-amplification of an optical signal. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. Depending on the wavelength of the external background and irradiation side, it acts either as a short- or a long-pass band filter or as a band-stop filter. A two-stage active circuit is presented and gives insight into the physics of the device.

Integrated photonic filters based on SiC multilayer structures

Combined tunable WDM converters based on SiC multilayer photonic active filters are analyzed. The operation combines the properties of active long-pass and short-pass wavelength filter sections into a capacitive active band-pass filter. The sensor element is a multilayered heterostructure produced by PE-CVD. The configuration includes two stacked SiC p-i-n structures sandwiched between two transparent contacts. Transfer function characteristics are studied both theoretically and experimentally. Results show that optical bias activated photonic device combines the demultiplexing operation with the simultaneous photodetection and self amplification of an optical signal acting the device as an integrated photonic filter in the visible range. Depending on the wavelength of the external background and irradiation side, the device acts either as a short- or a long-pass band filter or as a band-stop filter. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. A numerical simulation and a two building-blocks active circuit are presented and give insight into the physics of the device. (c) 2013 Elsevier B.V. All rights reserved.

Optimal design for active damping in sandwich structures using the Direct MultiSearch method

This paper addresses the problem of optimal positioning of surface bonded piezoelectric patches in sandwich plates with viscoelastic core and laminated face layers. The objective is to maximize a set of modal loss factors for a given frequency range using multiobjective topology optimization. Active damping is introduced through co-located negative velocity feedback control. The multiobjective topology optimization problem is solved using the Direct MultiSearch Method. An application to a simply supported sandwich plate is presented with results for the maximization of the first six modal loss factors. The influence of the finite element mesh is analyzed and the results are, to some extent, compared with those obtained using alternative single objective optimization. (C) 2013 Elsevier Ltd. All rights reserved.

Demand response in future power systems management – a conceptual framework and simulation tool

Mestrado em Engenharia Electrotécnica – Sistemas Eléctricos de Energia

Programa estruturado de enriquecimento conceptual e lexical

Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ciências da Educação - Especialidade Educação Especial

Analysis and simulation of a-Si Ha-SiC HPINIP structures for color image detection

It is presented in this paper a study on the photo-electronic properties of multi layer a-Si: H/a-SiC: H p-i-n-i-p structures. This study is aimed to give an insight into the internal electrical characteristics of such a structure in thermal equilibrium, under applied Was and under different illumination condition. Taking advantage of this insight it is possible to establish a relation among-the electrical behavior of the structure the structure geometry (i.e. thickness of the light absorbing intrinsic layers and of the internal n-layer) and the composition of the layers (i.e. optical bandgap controlled through percentage of carbon dilution in the a-Si1-xCx: H layers). Showing an optical gain for low incident light power controllable by means of externally applied bias or structure composition, these structures are quite attractive for photo-sensing device applications, like color sensors and large area color image detector. An analysis based on numerical ASCA simulations is presented for describing the behavior of different configurations of the device and compared with experimental measurements (spectral response and current-voltage characteristic). (c) 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

a-SiH p-i-n structures with extreme i-layer thickness

We present measurements and numerical simulation of a-Si:H p-i-n detectors with a wide range of intrinsic layer thickness between 2 and 10 pm. Such a large active layer thickness is required in applications like elementary particle detectors or X-ray detectors. For large thickness and depending on the applied bias, we observe a sharp peak in the spectral response in the red region near 700 nm. Simulation results obtained with the program ASCA are in agreement with the measurement and permit the explanation of the experimental data. In thick samples holes recombine or are trapped before reaching the contacts, and the conduction mechanism is fully electron dominated. As a consequence, the peak position in the spectral response is located near the optical band gap of the a-Si:H i-layer. (C) 2009 Elsevier B.V. All rights reserved.

Subunits of the chaperonin CCT are associated with Tetrahymena microtubule structures and are involved in cilia biogenesis

The cytosolic chaperonin CCT is a heterooligomeric complex of about 900 kDa that mediates the folding of cytoskeletal proteins. We observed by indirect immunofluorescence that the Tetrahymena TpCCTalpha, TpCCTdelta, TpCCTepsilon, and TpCCTeta-subunits colocalize with tubulin in cilia, basal bodies, oral apparatus, and contractile vacuole pores. TpCCT-subunits localization was affected during reciliation. These findings combined with atomic force microscopy measurements in reciliating cells indicate that these proteins play a role during cilia biogenesis related to microtubule nucleation, tubulin transport, and/or axoneme assembly. The TpCCT-subunits were also found to be associated with cortex and cytoplasmic microtubules suggesting that they can act as microtubule-associated proteins. The TpCCTdelta being the only subunit found associated with the macronuclear envelope indicates that it has functions outside of the 900 kDa complex. Tetrahymena cytoplasm contains granular/globular-structures of TpCCT-subunits in close association with microtubule arrays. Studies of reciliation and with cycloheximide suggest that these structures may be sites of translation and folding. Combined biochemical techniques revealed that reciliation affects the oligomeric state of TpCCT-subunits being tubulin preferentially associated with smaller CCT oligomeric species in early stages of reciliation. Collectively, these findings indicate that the oligomeric state of CCT-subunits reflects the translation capacity of the cell and microtubules integrity.

Abordagem à estruturação conceptual de um subdomínio do dicionário

Uma das abordagens mais importantes da terminologia é a desenvolvida pelas disciplinas técnico-científicas, para as quais representa a reflexão formal da sua organização conceptual e, como tal, um meio essencial de expressão e comunicação. De forma a desenvolver as diferentes tarefas a que se propõe, a terminologia tem como principal objecto de estudo os textos de línguas de especialidade, que são o primeiro veículo, por excelência, de expressão e comunicação das disciplinas suprareferidas. Estes textos reflectem, normalmente, um tipo de comunicação especializada, cujo objectivo é o da transferência de conhecimentos, realizada com recurso a um sistema de representação verbal. No entanto, a abertura e a extensão do texto escrito a outros meios de representação, sobretudo nas áreas técnicas, está a conduzir a uma nova tendência no campo da terminologia e da pesquisa das línguas de especialidade, que tem vindo a reforçar a importância da utilização de formas não-verbais para representar o conhecimento. A tendência para o aumento do uso destas formas de representação, normalmente em complemento ou conjugação com a informação verbal, aponta para um novo paradigma em que a linguagem, como representação do pensamento, parece estar em busca de uma nova abordagem que venha transformar a maneira de produzir, organizar e transmitir conhecimentos, recorrendo às novas tecnologias, cada vez mais à disposição da chamada sociedade do conhecimento. A nossa percepção desta realidade ganhou maior consistência ao longo do desenvolvimento de um projecto terminográfico de elaboração do Dicionário Multilingue de População e Desenvolvimento, no qual o recurso a sistemas de representação nãoverbais (organigramas e outro tipo de representações visuais), utilizados como forma de percepção e organização dos conceitos e dos domínios a incluir no dicionário, se tornou um meio importante de aquisição, discussão, estruturação e transmissão do conhecimento. Daí a decisão de abordarmos, ainda que de forma breve, a análise de duas problemáticas sugeridas pelo desenrolar daquele projecto. A primeira recai sobre o estabelecimento de relações semânticas entre os conceitos, sobre as implicações deste processo na estruturação conceptual e sobre a sua importância no processamento da informação terminológica. A segunda incide na análise do recurso aos meios de representação não-verbais e do papel que desempenham e que podem vir a desempenhar no desenrolar do processo terminológico, enquanto elementos de estruturação de um sistema conceptual, de estruturação de um projecto terminológico e de comunicação especializada. Estas duas problemáticas estão directamente interrelacionadas e devem ser analisadas em conjunto, sobretudo quando se trata de formalizar a informação e armazená-la numa base de dados terminológica, de forma a poder ser processada (semi)automaticamente.

Prospecção de recursos hidrominerais e geotérmicos na Orla Ocidental Portuguesa: os casos das Termas dos Cucos e de Monte Real

A cobertura sedimentar da região Oeste portuguesa é constituída por uma série possante de sedimentos com uma variedade de fácies com idades compreendidas entre o Triásico Superior e o actual. Estes sedimentos foram depositados numa bacia alongada com direcção NNE‐SSW. A tectónica desta cobertura sedimentar é condicionada pelas falhas tardi‐Variscas que afectaram o substrato e pelo complexo evaporítico depositado na base das séries sedimentares. Séries evaporíticas espessas de idade Hetangiana formaram numerosas estruturas diapíricas. Na região Oeste de Portugal existem diversas nascentes minerais e termais usadas para hidroterapia. Esta tese tem por objectivo estudar as concessões hidrominerais das Termas dos Cucos e das Termas de Monte Real (Portugal Central), bem como as suas áreas envolventes. Estas actividades hidroterapêuticas são muito relevantes em termos sócio‐económicos para os concelhos de Torres Vedras e Leiria. Os estudos contemplados nesta tese (que incluíram trabalho de campo no domínio da geotectónica, geomorfologia e hidrogeologia) permitiram delinear modelos hidrogeológicos conceptuais, apoiados, ainda, pela re‐interpretação de estudos geofísicos e hidrogeológicos prévios. A caracterização destas áreas foi suportada por inventários hidrogeológicos, tendo sido determinante para o projecto dos furos de captação, incluindo localização e profundidade. Todos os dados compilados foram representados cartograficamente numa base de Sistemas de Informação Geográfica (SIG).

Tuneable micro- and nano-periodic structures in urethane/urea networks

Micro- and nano-patterned materials are of great importance for the design of new nanoscale electronic, optical and mechanical devices, ranging from sensors to displays. A prospective system that can support a designed functionality is elastomeric polyurethane thin films with nano- or micromodulated surface structures ("wrinkles"). These wrinkles can be induced on different lengthscales by mechanically stretching the films, without the need for any sophisticated lithographic techniques. In the present article we focus on the experimental control of the wrinkling process. A simple model for wrinkle formation is also discussed, and some preliminary results reported. Hierarchical assembly of these tunable structures paves the way for the development of a new class of materials with a wide range of applications, from electronics to biomedicine.

Thermal Residual Stresses in Functionally Graded Structures: a Didactic Case Study

Conferência: 2nd Experiment at International Conference - 18-20 September 2013

Uncertainty assessment approach for composite structures based on global sensitivity indices

The problem of uncertainty propagation in composite laminate structures is studied. An approach based on the optimal design of composite structures to achieve a target reliability level is proposed. Using the Uniform Design Method (UDM), a set of design points is generated over a design domain centred at mean values of random variables, aimed at studying the space variability. The most critical Tsai number, the structural reliability index and the sensitivities are obtained for each UDM design point, using the maximum load obtained from optimal design search. Using the UDM design points as input/output patterns, an Artificial Neural Network (ANN) is developed based on supervised evolutionary learning. Finally, using the developed ANN a Monte Carlo simulation procedure is implemented and the variability of the structural response based on global sensitivity analysis (GSA) is studied. The GSA is based on the first order Sobol indices and relative sensitivities. An appropriate GSA algorithm aiming to obtain Sobol indices is proposed. The most important sources of uncertainty are identified.

An analysis of teachers' environmental concerns: use of a conceptual change model

Tese de doutoramento em Ciências da Educação