Characterization of ZnO Nanorods Grown on GaN Using Aqueous Solution Method

Uniformly distributed ZnO nanorods with diameter 70-100 nm and 1-2μm long have been successfully grown at low temperatures on GaN by using the inexpensive aqueous solution method. The formation of the ZnO nanorods and the growth parameters are controlled by reactant concentration, temperature and pH. No catalyst is required. The XRD studies show that the ZnO nanorods are single crystals and that they grow along the c axis of the crystal plane. The room temperature photoluminescence measurements have shown ultraviolet peaks at 388nm with high intensity, which are comparable to those found in high quality ZnO films. The mechanism of the nanorod growth in the aqueous solution is proposed. The dependence of the ZnO nanorods on the growth parameters was also investigated. While changing the growth temperature from 60°C to 150°C, the morphology of the ZnO nanorods changed from sharp tip (needle shape) to flat tip (rod shape). These kinds of structure are useful in laser and field emission application.

Growth of ZnO Nanorods on GaN Using Aqueous Solution Method

Uniformly distributed ZnO nanorods with diameter 80-120 nm and 1-2µm long have been successfully grown at low temperatures on GaN by using the inexpensive aqueous solution method. The formation of the ZnO nanorods and the growth parameters are controlled by reactant concentration, temperature and pH. No catalyst is required. The XRD studies show that the ZnO nanorods are single crystals and that they grow along the c axis of the crystal plane. The room temperature photoluminescence measurements have shown ultraviolet peaks at 388nm with high intensity, which are comparable to those found in high quality ZnO films. The mechanism of the nanorod growth in the aqueous solution is proposed. The dependence of the ZnO nanorods on the growth parameters was also investigated. While changing the growth temperature from 60°C to 150°C, the morphology of the ZnO nanorods changed from sharp tip with high aspect ratio to flat tip with smaller aspect ratio. These kinds of structure are useful in laser and field emission application.

La negociación política internacional en derechos humanos: Colombia en la Comisión de Derechos Humanos de las Naciones Unidas

Con la creación y maduración de los organismos internacionales, las relaciones de poder ya no se daban solo entre estados, sino que se incluyen organismos internacionales y organizaciones multinacionales como actores del sistema internacional

Características del diseño de una relación estratégica comunitaria y marketing en emprendimiento en el sector de ambientadores y cosméticos

En nuestro país el sector de ambientadores y cosméticos ha presentado un crecimiento económico constante y notable, proyectando a Colombia para el año 2032 como un dirigente en la elaboración de cosméticos y productos de aseo. La biodiversidad colombiana ofrece múltiples recursos, incluyendo una gran diversidad de aromas naturales, es un importante mercado para producción de cosméticos sin la utilización de productos artificiales. El presente trabajo de investigación tiene por objetivo determinar las características del diseño de una relación estratégica comunitaria y marketing en la creación de una empresa de cosméticos y ambientadores. Ésta investigación se realiza bajo la recopilación de información del sector y principalmente de la organización, dentro de un estudio empírico-analítico descriptivo. Estableciendo resultados que finalmente dan respuesta a la utilidad de estrategias comunitarias en la actualidad. En el caso de estudio de la nueva empresa "Jolie Le Petit" en un sector en crecimiento, ofrece múltiples oportunidades de negocio y permite generar ideas innovadoras para la venta de productos. La facilidad de cambio y la inclusión en la comunidad posibilita el acercamiento a los clientes, asegurando la permanencia en el mercado indicado. Considerando la posibilidad que la inversión extranjera en el sector pueda afectar notablemente el mercado nacional. Mediante el análisis concluimos que la estrategia de mercadeo comunitaria es adecuada y aplicable a este tipo de empresa. "Jolie Le Petit" además de ser una unidad es también un actor social, estando inmersa en una comunidad en donde juega un papel vital el ser percibida como un buen vecino, ofreciendo a los clientes confianza compromiso y relación continua.

The re-urbanization of the city center of Manaus , Brazil - Facing the challenges of informal settlements

Illegal occupation of urban land in Brazil is a widespread phenomenon. Slum dwellers are excluded from the attributes of urban citizenship although they provide the labor force required by low productivity urban services needed by cities. Illegal settlements generate multiple problems for the rest of the city . Its solution is of key relevance to the city in general but also provide an opportunity for the social and economic advancement of slum dwellers. The programs required to attain these results are complex and difficult to implement underscoring the challenges countries will face to attain the Millennium Development Goals of reducing the population living in slums.

The EU’s re-engagement as a security actor: Fresh start or still sleepwalking. CEPS Commentary, 12 July 2012

By the end of the summer, the EU will launch new crisis management missions in the Horn of Africa, Niger and South Sudan. In this CEPS Commentary, Giovanni Faleg and Steven Blockmans question whether the new deployments will revive the EU’s persona as a global security actor. The authors point out that, without the backing of a comprehensive security strategy rationale, the EU’s re-engagement as a crisis manager that opts for small-scale operations will be seen as a continuation of its sleepwalking through a changing geostrategic landscape.

The Prize is more Peace: The EU should consolidate its enlargement process. CEPS Commentary, 8 November 2012

The sovereign debt crisis and the threat of financial collapse of some EU member states have triggered fierce debate about the economic, social and political finalité of the Union and curbed the appetite for further enlargement. The European Commission needs to find new ways to consolidate the enlargement agenda, gain full support of the member states for its implementation and assure a consistent application of the pre-accession requirements. Arguably, more time, more money and greater expertise are needed to pursue the vocation recognised by the Nobel Committee.

The EU's External Action towards the Middle East: Resolution required. CEPS Commentary, 7 January 2012

Among the many foreign policy challenges the EU will have to address this year, such as cultivating workable ties with Ukraine, Russia and other neighbours in the east, reviving the transatlantic partnership in trade, rebalancing alliances with Asian countries, and pooling and sharing defence capabilities, the number one challenge that will take up most of the Foreign Affairs Council’s time is the Middle East. After months of half-baked unilateral attempts at resolving the foreign policy challenges posed by this troubled region, the moment has now come for the EU to take bold and concrete action, argues CEPS Senior Fellow Steven Blockmans in this new Commentary.

Predicting mesh density for adaptive modelling of the global atmosphere

The shallow water equations are solved using a mesh of polygons on the sphere, which adapts infrequently to the predicted future solution. Infrequent mesh adaptation reduces the cost of adaptation and load-balancing and will thus allow for more accurate mapping on adaptation. We simulate the growth of a barotropically unstable jet adapting the mesh every 12 h. Using an adaptation criterion based largely on the gradient of the vorticity leads to a mesh with around 20 per cent of the cells of a uniform mesh that gives equivalent results. This is a similar proportion to previous studies of the same test case with mesh adaptation every 1–20 min. The prediction of the mesh density involves solving the shallow water equations on a coarse mesh in advance of the locally refined mesh in order to estimate where features requiring higher resolution will grow, decay or move to. The adaptation criterion consists of two parts: that resolved on the coarse mesh, and that which is not resolved and so is passively advected on the coarse mesh. This combination leads to a balance between resolving features controlled by the large-scale dynamics and maintaining fine-scale features.

Efficient tree construction for the multicast problem

A new heuristic for the Steiner Minimal Tree problem is presented here. The method described is based on the detection of particular sets of nodes in networks, the “Hot Spot” sets, which are used to obtain better approximations of the optimal solutions. An algorithm is also proposed which is capable of improving the solutions obtained by classical heuristics, by means of a stirring process of the nodes in solution trees. Classical heuristics and an enumerative method are used CIS comparison terms in the experimental analysis which demonstrates the goodness of the heuristic discussed in this paper.

Efficient tree construction for the multicast problem

A new heuristic for the Steiner minimal tree problem is presented. The method described is based on the detection of particular sets of nodes in networks, the “hot spot” sets, which are used to obtain better approximations of the optimal solutions. An algorithm is also proposed which is capable of improving the solutions obtained by classical heuristics, by means of a stirring process of the nodes in solution trees. Classical heuristics and an enumerative method are used as comparison terms in the experimental analysis which demonstrates the capability of the heuristic discussed

On the steadiness of separating meandering currents

The existence of inertial steady currents that separate from a coast and meander afterward is investigated. By integrating the zonal momentum equation over a suitable area, it is shown that retroflecting currents cannot be steady in a reduced gravity or in a barotropic model of the ocean. Even friction cannot negate this conclusion. Previous literature on this subject, notably the discrepancy between several articles by Nof and Pichevin on the unsteadiness of retroflecting currents and steady solutions presented in other papers, is critically discussed. For more general separating current systems, a local analysis of the zonal momentum balance shows that given a coastal current with a specific zonal momentum structure, an inertial, steady, separating current is unlikely, and the only analytical solution provided in the literature is shown to be inconsistent. In a basin-wide view of these separating current systems, a scaling analysis reveals that steady separation is impossible when the interior flow is nondissipative (e.g., linear Sverdrup-like). These findings point to the possibility that a large part of the variability in the world’s oceans is due to the separation process rather than to instability of a free jet.

Numerical simulation of the 12 May 1997 CME Event: The role of magnetic reconnection

We perform a numerical study of the evolution of a Coronal Mass Ejection (CME) and its interaction with the coronal magnetic field based on the 12 May 1997, CME event using a global MagnetoHydroDynamic (MHD) model for the solar corona. The ambient solar wind steady-state solution is driven by photospheric magnetic field data, while the solar eruption is obtained by superimposing an unstable flux rope onto the steady-state solution. During the initial stage of CME expansion, the core flux rope reconnects with the neighboring field, which facilitates lateral expansion of the CME footprint in the low corona. The flux rope field also reconnects with the oppositely orientated overlying magnetic field in the manner of the breakout model. During this stage of the eruption, the simulated CME rotates counter-clockwise to achieve an orientation that is in agreement with the interplanetary flux rope observed at 1 AU. A significant component of the CME that expands into interplanetary space comprises one of the side lobes created mainly as a result of reconnection with the overlying field. Within 3 hours, reconnection effectively modifies the CME connectivity from the initial condition where both footpoints are rooted in the active region to a situation where one footpoint is displaced into the quiet Sun, at a significant distance (≈1R ) from the original source region. The expansion and rotation due to interaction with the overlying magnetic field stops when the CME reaches the outer edge of the helmet streamer belt, where the field is organized on a global scale. The simulation thus offers a new view of the role reconnection plays in rotating a CME flux rope and transporting its footpoints while preserving its core structure.

Micellar and surface properties of a poly(methyl methacrylate)-block-poly(N-isopropylacrylamide) copolymer in aqueous solution

Critical micelle concentrations (cmc) of aqueous solutions of poly(methyl methacrylate)-block-poly(N-isopropylacrylamide) were determined at several temperatures by surface tensiometry. Below the lower critical solution temperature (LCST), the low Delta(mic) H-0 determined can be assigned to the PMMA block being tightly coiled in the dispersed molecular state, so that the unfavorable interactions of hydrophobic entities with water are minimized. Above the LCST the cmc value was found to increase; an anomalous behavior that can be directly related to the micelle-globule transition of the hydrophilic block. Interestingly, above the LCST the surface tension of relatively concentrated solutions was found to depend weakly on temperature not following the usual strong decrease with temperature expected for aqueous solutions. (C) 2007 Elsevier Inc. All rights reserved.

Aerogel-coated metal nanoparticle colloids as novel entities for the synthesis of defined supported metal catalysts

Nanometer metal particles of tailored size (3-5 nm) and composition prepared via inverse microemulsion were encapsulated by ultrathin coatings (<2.5 nm) of inorganic porous aerogels covered with surface -OH groups. These composite materials formed metastable colloids in solvent(s), and the organic surfactant molecules were subsequently removed without leading to aggregation (the ethanolic colloid solution was shown to be stable against flocculation for at least weeks). We demonstrate that the totally inorganic-based composite colloids, after the removal of surfactant, can be anchored to conventional solid supports (gamma-alumina, carbons) upon mixing. Application of a high temperature resulted in the formation of strong covalent linkages between the colloids and the support because of the condensation of surface groups at the interface. Detailed characterizations (X-ray diffraction (XRD), pore analysis, transmission electron microscopy (TEM), CO chemisorption) and catalytic testing (butane combustion) showed that there was no significant metal aggregation from the fine metal particles individually coated with porous aerogel oxide. Most of these metal sites on the coated nanoparticles with and without support are fully accessible by small molecules hence giving extremely active metal catalysts. Thus, the product and technology described may be suitable to synthesize these precursor entities of defined metal sizes (as inks) for wash coat/impregnation applications in catalysis. The advantages of developing inorganic nanocomposite chemical precursors are also discussed.