Implementing low intensity CBT in case management of clients with severe mental illness

In a previous chapter (Dean and Kavanagh, Chapter 37), the authors made a case for applying low intensity (LI) cognitive behaviour therapy (CBT) to people with serious mental illness (SMI). As in other populations, LI CBT interventions typically deal with circumscribed problems or behaviours. LI CBT retains an emphasis on self-management, has restricted content and segment length, and does not necessarily require extensive CBT training. In applying these interventions to SMI, adjustments may be needed to address cognitive and symptomatic difficulties often faced by these groups. What may take a single session in a less affected population may require several sessions or a thematic application of the strategy within case management. In some cases, the LI CBT may begin to appear more like a high-intensity (HI) intervention, albeit simple and with many LI CBT characteristics still retained. So, if goal setting were introduced in one or two sessions, it could clearly be seen as an LI intervention. When applied to several different situations and across many sessions, it may be indistinguishable from a simple HI treatment, even if it retains the same format and is effectively applied by a practitioner with limited CBT training. ----- ----- In some ways, LI CBT should be well suited to case management of patients with SMI. treating staff typically have heavy workloads, and find it difficult to apply time-consuming treatments (Singh et al. 2003). LI CBT may allow provision of support to greater numbers of service users, and allow staff to spend more time on those who need intensive and sustained support. However, the introduction of any change in practice has to address significant challenges, and LI CBT is no exception. ----- ----- Many of the issues that we face in applying LI CBT to routine case management in a mnetal health service and their potential solutions are essentially the same as in a range of other problem domains (Turner and Sanders 2006)- and, indeed, are similar to those in any adoption of innovation (Rogers 2003). Over the last 20 years, several commentators have described barriers to implementing evidence-based innovations in mental health services (Corrigan et al. 1992; Deane et al. 2006; Kavanagh et al. 1993). The aim of the current chapter is to present a cognitive behavioural conceptualisation of problems and potential solutions for dissemination of LI CBT.

Adapting low intensity CBT interventions for clients with severe mental illness

Many people with severe mental illness (SMI) such as schizophrenia, whose psychotic symptoms are effectively managed, continue to experience significant functional problems. This chapter argues that low intensity (LI) cognitive behaviour therapy (CBT; e.g. for depression, anxiety, or other issues) is applicable to these clients, and that LI CBT can be consistent with long-term case management. However, adjustments to LI CBT strategies are often necessary and boundaries between LI CBT and high intensity (HI) CBT (with more extensive practitioner contact and complexity) may become blurred. Our focus is on LI CBT's self-management emphasis, its restricted content and segment length, and potential use after limited training. In addition to exploring these issues, it draws on the authors' Collaborative Recovery (CR; Oades et al. 2005) and 'Start Over and Survive' programs (Kavanagh et al. 2004) as examples. ----- ----- Evidence for the effectiveness of LI CBT with severe mental illness is often embedded within multicomponent programs. For example, goal setting and therapeutic homework are common components of such programs, but they can also be used as discrete LI CBT interventions. A review of 40 randomised controlled trials involving recipients with schizophrenia or other sever mental illnesses has identified key components of illness management programs (Mueser et al. 2002). However, it is relatively rare for specific components of these complex interventions to be assessed in isolation. Given these constraints, the evidence for specific LI CBT interventions with severe mental ilnness is relatively limited.

Brief motivational interviewing for depression and anxiety

Motivational interviewing (MI)can be applied as a brief, low intensity (LI) intervention of 1-4 individualised sessions (typically 45-60 minutes in duration), including screening, assessment feedback, and psycho-education. MI is a client-centred, directive therapeutic style that enhances readiness for change by helping clients explore and resolve ambivalence (Miller and Rollnick 2002). A summary of the key components of brief MI interventions is provided in Table 16.1. There is a well-established evidence base for MI in the treatment of substance misuse (particularly alcohol misuse; Moyer et al. 2002), as well as a growing evidence for the use of MI in the treatment of other mental disorders (e.g. depression, PTSD, OCD), as well as suicidality and physical health problems (Hettema et al. 2005). Brief MI intervention can be delivered as a standalone treatment or as a motivational prelude to pharmacological and/or other psychological treatments (Hettema et al. 2005). MI has been used as an accompaniment to cognitive behavioural therapy (CBT) in the treatment of both depression and anxiety for resolving ambivalence about change and developing strategies for responding to resistance (e.g. treatment attendance, homework/medication compliance; Arkowitz et al. 2008a, 2008b). This chapter will describe how to apply brief MI interventions to the treatment of depression and anxiety as applied to the case of Megan (see Box 16.1) along with some of the challenges and potential solutions to applying MI in practice.

Consumer satisfaction and redress with a government third-party complaints agency

As governments around the world adopt a marketing orientation, the importance of consumer satisfaction to the effectiveness of the organization is being recognized. While some investigation of satisfaction with a government agencies' service has occurred, there is little examination of satisfaction with a government agency that acts as a third-party on the behalf of consumers to gain marketplace redress. Given the number of third-party complaints is increasing as a result of internet access to complaint channels, this research is a timely investigation. This study reports the findings of a survey of 454 complainants to an Australian Government agency: the Office of Fair Trading (OFT). The findings show that satisfaction with the service was subjectively experienced, based around individual expectations of the redress and satisfaction levels were higher when the redress sought was financial compared with non-financial forms of redress such as apology.

Leveraging R&D investment for the Australian built environment

This paper discusses a current research project building new understandings and knowledge relevant to R&D funding strategies in Australia. Building on a retrospective analysis of R&D trends and industry outcomes, an industry roadmap will be developed to inform R&D policies more attuned to future industry needs to improve research investment effectiveness. The project will also include analysis of research team formation and management (involving end users from public and private sectors together with research and knowledge institutions), and dissemination of outcomes and uptake in the Australian building and construction industry. The project will build on previous research extending open innovation system theory and network analysis and procurement, focused on R&D. Through the application of dynamic capabilities and strategic foresighting theory, an industry roadmap for future research investment will be developed, providing a stronger foundation for more targeted policy recommendations. This research will contribute to more effective construction processes in the future through more targeted research funding and more effective research partnerships between industry and researchers.

Leveraging R&D to advance digital modelling practice in Australian construction

This paper describes a lead project currently underway through Australia’s Sustainable Built Environment National Research Centre, evaluating impacts, diffusion mechanisms and uptake of R&D in the Australian building and construction industry. Building on a retrospective analysis of R&D trends and industry outcomes, a future-focused industry roadmap will be developed to inform R&D policies more attuned to future industry needs to improve investment effectiveness. In particular, this research will evaluate national R&D efforts to develop, test and implement advanced digital modelling technologies into the design/construction/asset management cycle. This research will build new understandings and knowledge relevant to R&D funding strategies, research team formation and management (with involvement from public and private sectors, and research and knowledge institutions), dissemination of outcomes and uptake. This is critical due to the disaggregated nature of the industry, intense competition, limited R&D investment; and new challenges (e.g. digital modelling, integrated project delivery, and the demand for packaged services). The evaluation of leading Australian and international efforts to integrate advanced digital modelling technologies into the design/construction/asset management cycle will be undertaken as one of three case studies. Employing the recently released Australian Guidelines for Digital Modelling developed with buildingSMART (International Alliance for Interoperability) and the Australian Institute of Architects, technical and business benefits across the supply chain will be highlighted as drivers for more integrated R&D efforts.

Do programs to improve business performance in small and medium manufacturing enterprise improve opportunity recognition?

Increasing awareness of the benefits of stimulating entrepreneurial behaviour in small and medium enterprises has fostered strong interest in innovation programs. Recently many western countries have invested in design innovation for better firm performance. This research presents some early findings from a study of companies which participated in an holistic approach to design innovation, where the outcomes include better business performance and better market positioning in global markets. Preliminary findings from in-depth semi-structured interviews indicate the importance of firm openness to new ways of working and developing new processes of strategic entrepreneurship. Implications for theory and practice are discussed.

Fatalism and road safety in developing countries, with a focus on Pakistan

Road crashes are a significant problem in developing countries such as Pakistan. Attitudes are among the human factors which influence risky road use and receptiveness to interventions. Fatalism is a set of attitudes known to be important in Pakistan and other developing countries; however it is rarely addressed in the road safety literature. Two broad types of fatalism are “theological fatalism” and “empirical fatalism”, both of which are found in developed countries as well as in developing countries. Where research has been conducted into the issue, fatalism is considered to interfere with messages aimed at improving road safety. Pakistan has a serious road crash problem, and there is sufficient information to suggest that fatalism is an important contributing factor to the problem, but a better understanding of how fatalism operates in Pakistan is needed if effective prevention strategies are to be developed. A proposed study using an anthropological approach is described which will be exploratory in nature and which is aimed at investigating fatalism and related concepts among Pakistani road users and those who develop and implement road safety policy.

Social influences on drivers in China

China is one of Asia’s many rapidly-motorising nations and recent increases in private-vehicle ownership have been coupled with an escalation in novice drivers. Several pieces of road safety legislation have been introduced in recent decades in China. While managing the legal aspects of road use is important, social influences on driver behaviour may offer alternative avenues to alter behaviour, particularly in a culture where such factors carry high importance. This paper reports qualitative research with Beijing drivers to investigate social influence factors that have, to date, received little attention in the literature. Findings indicated that family members, friends, and driving instructors appear influential on driver behaviour and that some newly licensed drivers seek additional assistance to facilitate the transition from learning to drive in a controlled environment to driving on the road in complex conditions. Strategies to avoid detection and penalties for inappropriate road use were described, many of which involved the use of a third person. These findings indicate potential barriers to implementing effective traffic enforcement and highlight the importance of understanding culturally-specific social factors relating to driver behaviour.

Pedagogies of industry partnership

This chapter discusses the experiences of doctoral students who work across traditional disciplinary and university-industry boundaries. These new contexts for doctoral education are shaping how students are experiencing and responding to requirements for changing knowledge relationships. Drawing on Bernstein's discussion of pedagogic practice as being socially constructed, and his conceptual framework outlining the social implications of the weaker boundaries required for these knowledge relationships, we discuss students' descriptions of their topics, processes and challenges and show their strategies for performing scholarly research across these boundaries as key elements in the nature and achievement of “industry readiness”. In particular, we identify two key elements in the pedagogy of industry partnership: students’ understandings and management of the knowledge relationships involved in this work, and the dispositions they bring to bear in negotiating research and careers across disciplinary and sectoral boundaries.

Managing specialised knowledge in technopreneurial firms : the Australian experience

Technology-oriented young firms play an important role for innovation and commercialisation of new ideas. These firms are often founded by engineers, scientists or academics who posses great scientific/technological knowledge, but limited know-how in other aspects of managing a business including knowledge management. Successful managing and integrating their specialised knowledge is of particular importance when it comes to developing a new product or process. This article therefore focuses on the particularities of the knowledge management process in technopreneurial firms. Using a qualitative investigation from a sample of Australian SMEs, a number of key observations are derived which show the challenges of managing knowledge and how important knowledge management is as a management tool for R&D and innovation process in technology-oriented SMEs. Findings suggest that knowledge management and integration processes in these firms are very much project focused and mainly based on ad hoc and informal processes and not embedded within the overall organisational routines.