Micro-layered-photolithography for Micro-Fabrication and Micro-Molding

A novel process based on the principle of layered photolithography has been proposed and tested for making real three-dimensional micro-structures. An experimental setup was designed and built for doing experiments on this micro-fabrication process. An ultraviolet (UV) excimer laser at the wavelength of 248 nm was used as the light source and a single piece of photo-mask carrying a series of two dimensional (2D) patterns sliced from a three dimensional (3D) micro-part was employed for the photolithography process. The experiments were conducted on the solidification of liquid photopolymer from single layer to multiple layers. The single-layer photolithography experiments showed that certain photopolymers could be applied for the 3D micro-fabrication, and solid layers with sharp shapes could be formed from the liquid polymer identified. By using a unique alignment technique, multiple layers of photolithography was successfully realized for a micro-gear with features at 60 microns. Electroforming was also conducted for converting the photopolymer master to a metal cavity of the micro-gear, which proved that the process is feasible for micro-molding.

Planning and Scheduling Decisions in Supply Chains with Multiple Supply Modes: An Integrated Approach

We address the problem of jointly determining shipment planning and scheduling decisions with the presence of multiple shipment modes. We consider long lead time, less expensive sea shipment mode, and short lead time but expensive air shipment modes. Existing research on multiple shipment modes largely address the short term scheduling decisions only. Motivated by an industrial problem where planning decisions are independent of the scheduling decisions, we investigate the benefits of integrating the two sets of decisions. We develop sequence of mathematical models to address the planning and scheduling decisions. Preliminary computational results indicate improved performance of the integrated approach over some of the existing policies used in real-life situations.

Temporary and Permanent Buyout Prices in Online Auctions

Increasingly used in online auctions, buyout prices allow bidders to instantly purchase the item listed. We distinguish two types: a temporary buyout option disappears if a bid above the reserve price is made; a permanent one remains throughout the auction or until it is exercised. In a model featuring time-sensitive bidders with uniform valuations and Poisson arrivals but endogenous bidding times, we focus on finding temporary and permanent buyout prices maximizing the seller's discounted revenue, and examine the relative benefit of using each type of option in various environments. We characterize equilibrium bidder strategies in both cases and then solve the problem of maximizing seller's utility by simulation. Our numerical experiments suggest that buyout options may significantly increase a seller’s revenue. Additionally, while a temporary buyout option promotes early bidding, a permanent option gives an incentive to the bidders to bid late, thus leading to concentrated bids near the end of the auction.

UV Embossed Plastic Chip for Protein Separation and Identification

This report demonstrates a UV-embossed polymeric chip for protein separation and identification by Capillary Isoelectric Focusing (CIEF) and Matrix Assisted Laser Desportion/Ionization Mass Spectrometry (MALDI-MS). The polymeric chip has been fabricated by UV-embossing technique with high throughput; the issues in the fabrication have been addressed. In order to achieve high sensitivity of mass detection, five different types of UV curable polymer have been used as sample support to perform protein ionization in Mass Spectrometry (MS); the best results is compared to PMMA, which was the commonly used plastic chip for biomolecular separation. Experimental results show that signal from polyester is 12 times better than that of PMMA in terms of detection sensitivity. Finally, polyester chip is utilized to carry out CIEF to separate proteins, followed by MS identification.

The Japanese Business System: Key Features and Prospects for Change

This paper argues that the Japanese business system cannot be adequately understood without extending the focus of analysis beyond the individual firm to the vertical keiretsu, or business group. The vertical group or keiretsu structure was first identified and studied in the auto and electronics industries, where it is most strongly marked, but it characterizes virtually all sectors, service industries as well as manufacturing. Large industrial vertical keiretsu are composed of subsidiaries engaged in three distinct types of activities (manufacturing, marketing, and quasirelated business). The coordination and control systems are built on the flows of products, financial resources, information and technology, and people across formal company boundaries, with the parent firm controlling the key flows. The paper examines the prevailing explanations first for the emergence and then for the persistence of the vertical group structure, and looks at the current pressures for change and adaptation in the system.

Using appearance and context for outdoor scene object classification

We propose a probabilistic object classifier for outdoor scene analysis as a first step in solving the problem of scene context generation. The method begins with a top-down control, which uses the previously learned models (appearance and absolute location) to obtain an initial pixel-level classification. This information provides us the core of objects, which is used to acquire a more accurate object model. Therefore, their growing by specific active regions allows us to obtain an accurate recognition of known regions. Next, a stage of general segmentation provides the segmentation of unknown regions by a bottom-strategy. Finally, the last stage tries to perform a region fusion of known and unknown segmented objects. The result is both a segmentation of the image and a recognition of each segment as a given object class or as an unknown segmented object. Furthermore, experimental results are shown and evaluated to prove the validity of our proposal

Dam wall detection and tracking using a Mechanically Scanned Imaging Sonar

In dam inspection tasks, an underwater robot has to grab images while surveying the wall meanwhile maintaining a certain distance and relative orientation. This paper proposes the use of an MSIS (mechanically scanned imaging sonar) for relative positioning of a robot with respect to the wall. An imaging sonar gathers polar image scans from which depth images (range & bearing) are generated. Depth scans are first processed to extract a line corresponding to the wall (with the Hough transform), which is then tracked by means of an EKF (Extended Kalman Filter) using a static motion model and an implicit measurement equation associating the sensed points to the candidate line. The line estimate is referenced to the robot fixed frame and represented in polar coordinates (rho&thetas) which directly corresponds to the actual distance and relative orientation of the robot with respect to the wall. The proposed system has been tested in simulation as well as in water tank conditions

A distributed environment for virtual and/or real experiments for underwater robots

This paper presents the distributed environment for virtual and/or real experiments for underwater robots (DEVRE). This environment is composed of a set of processes running on a local area network composed of three sites: 1) the onboard AUV computer; 2) a surface computer used as human-machine interface (HMI); and 3) a computer used for simulating the vehicle dynamics and representing the virtual world. The HMI can be transparently linked to the real sensors and actuators dealing with a real mission. It can also be linked with virtual sensors and virtual actuators, dealing with a virtual mission. The aim of DEVRE is to assist engineers during the software development and testing in the lab prior to real experiments

A firm-level analysis of ICT adoption in an emerging economy: evidence from the colombian manufacturing industries

This study examines ICT adoption among 3,759 Colombian manufacturing firms, and attempts to identify the factors that are conducive to the adoption and usage of ICT at the firm level. Our major findings are (i) that the adoption of a given information and communication technology is better facilitated when a firm is relatively large, has large human capital, engages in more innovative activities, and when a firm’s organizational structure is better aligned with the given technology; (ii) that positive associations between the key determinants and ICT adoptions are more pronounced for small and medium-sized firms than for large ones, and (iii) that information spillovers within industries is also a determinant of ICT adoptions by the firms.

Composition and cure temperature: The influence on properties of final flexible PU cold cure foam parts

Foams are cellular structures, produced by gas bubbles formed during the polyurethane polymerization mixture. Flexible PU foams meet the following two criteria: have a limited resistance to an applied load, being both permeable to air and reversibly deformable. There are two main types of flexible foams, hot and cold cure foams differing in composition and processing temperatures. The hot cure foams are widely applied and represent the main composition of actual foams, while cold cure foams present several processing and property advantages, e.g, faster demoulding time, better humid aging properties and more versatility, as hardness variation with index changes are greater than with hot cure foams. The processing of cold cure foams also is attractive due to the low energy consumption (mould temperature from 30 degrees to 65 degrees C) comparatively to hot cure foams (mould temperature from 30 degrees to 250 degrees C). Another advantage is the high variety of soft materials for low temperature processing moulds. Cold cure foams are diphenylmethane diisocyanate (MDI) based while hot cure foams are toluene diisocyanate (TDI) based. This study is concerned with Viscoelastic flexible foams MDI based for medical applications. Differential Scanning Calorimetry (DSC) was used to characterize the cure kinetics and Dynamical Mechanical Analisys to collect mechanical data. The data obtained from these two experimental procedures were analyzed and associated to establish processing/properties/operation conditions relationships. These maps for the selection of optimized processing/properties/operation conditions are important to achieve better final part properties at lower costs and lead times.

Gaming and social interactions in the rehabilitation of brain injuries: a pilot study

Physical rehabilitation of brain injuries and strokes is a time consuming and costly process. Over the past decade several studies have emerged looking at the use of highly sophisticated technologies, such as robotics and virtual reality to tap into the needs of clinicians and patients. While such technologies can be a valuable tool to facilitate intensive movement practice in a motivating and engaging environment, success of therapy also depends on self-administered therapy beyond hospital stay. With the emergence of low-cost gaming consoles such as the Nintendo Wii, new opportunities arise for home-therapy paradigms centred on social interactions and values, which could reduce the sense of isolation and other depression related complications. In this paper we examine the potential, user acceptance and usability of an unmodified Nintendo Wii gaming console as a low-cost treatment alternative to complement current rehabilitation programmes.

Design, testing, and simulation of fibre composite leaf springs for heavy axle loads

This paper summarizes the design, manufacturing, testing, and finite element analysis (FEA) of glass-fibre-reinforced polyester leaf springs for rail freight vehicles. FEA predictions of load-deflection curves under static loading are presented, together with comparisons with test results. Bending stress distribution at typical load conditions is plotted for the springs. The springs have been mounted on a real wagon and drop tests at tare and full load have been carried out on a purpose-built shaker rig. The transient response of the springs from tests and FEA is presented and discussed.

Impact properties of glass/plant fibre hybrid laminates

The use of plants fibre reinforced composites has continuously increased during recent years. Their low density, higher environmental friendliness, and reduced cost proved particularly attractive for low-tech applications e.g., in building, automotive and leisure time industry. However, a major limitation to the use of these materials in structural components is unsatisfactory impact performance. An intermediate approach, the production of glass/ plant fibre hybrid laminates, has also been explored, trying to obtain materials with sufficient impact properties, whilst retaining a reduced cost and a substantial environmental gain. A survey is given on some aspects, crucial for the use of glass/plant fibre hybrid laminates in structural components: performance of hybrids when subjected to impact testing; the effect of laminate configuration, manufacturing procedure and fibre treatment on impact properties of the composite. Finally, indications are provided for a suitable selection of plant fibres with minimal extraction damage and sufficient toughness, for introduction in an impact-resistant glass/plant fibre hybrid laminate.

A comparison of the Oxford and Manus intelligent hand prostheses

Historically, commercial hand prosthesis have adopted a low level of innovation mainly due to the strict conditions such a system must undergo. The difficult feedback to the prosthesis user has limited the functional range of commercial systems. Nevertheless, the use of advanced sensors in combination with performing hand mechanisms and microcontrollers could lead to more natural and functional prototypes. The Oxford and Manus intelligent hand prostheses are examples of innovative approaches. This paper compares and contrasts the technological solutions implemented in both systems to address the design conditions.

What is networked robotics?

Networked Robotics is an area that straddles robotics and network technology. A robot system controlled via the WWW exploits the Internet network and hence is one realisation of networked robotics. A set of field robots that exploit wireless networks to share and distribute tasks might also be considered an exemplar of networked robotics. But isn't this just an exemplar of distributed robotics? And if so, what does networked robotics bring to the 'robotics' table? These are questions and issues addressed in this paper. The paper will propose that networks are at once both enabling and constraining to robotics. They enlarge the scope of the robotics discipline yet introduce challenges that must be overcome if that potential is to be fully realized. In short, when the network becomes a design issue - normally when performance of the system is at a premium - networked robotics is at play.