Estudi i implementació d'un arxivat de dades per a les plataformes SAP Enterprise 4.7 x 200 d'una gran empresa

En aquest projecte s'ha implementat un sistema de data archiving amb SAP-IXOS per a una empresa després que aquesta demanés consell a la nostra consultora per reduir espai en la base de dades, ja que només els quedava lliure un 14% de l'ocupació total, i d'aquesta forma millorar el rendiment del sistema. S'ha realitzat un estudi de la base de dades, ocupació en Mb i creixement mensual de les dades en les taules. S'han parametritzat objectes d'arxivat, creat i definits repositoris de contingut, fitxers lògics i s'han programat reports addicionals per arxivar les dades correctament. El resultat ha estat reduir la base de dades en un 22% sent posible l'entrada de noves dades obtenint una resposta més àgil del sistema.

Estudio de los efectos del movimiento en señales OFDM

El entorno aéreo es, a día de hoy, uno de los escenarios más complicados a la hora de establecer enlaces de comunicación fiables. Esto es debido, principalmente, a las altas velocidades a las que circulan los aviones, que propician una gran degradación del rendimiento des sistema si no se estima de forma continua el canal. Además el entorno aéreo es susceptible a sufrir muchos otros efectos que provocan la degradación de la señal, como la difracción, la reflexión, etc. Por este motivo en este proyecto se hace un estudio de dos escenarios típicos de vuelo: arrival (aterrizaje) y on route (vuelo en ruta). En el escenario on route los aviones circulan a más de el doble de velocidad que en el escenario arrival, de esta manera se podrá ver el efecto de sufrir un doppler mayor. Para realizar el estudio se utiliza un sistema multiportadora con solapamiento de subcanales, OFDM, y se toman inicialmente parámetros típicos de la tecnología WiMAX, que se variarán con el objetivo de mejorar el rendimiento del sistema.

Predictive and distributed routing balancing (PR-DRB): high speed interconnection networks

Current parallel applications running on clusters require the use of an interconnection network to perform communications among all computing nodes available. Imbalance of communications can produce network congestion, reducing throughput and increasing latency, degrading the overall system performance. On the other hand, parallel applications running on these networks posses representative stages which allow their characterization, as well as repetitive behavior that can be identified on the basis of this characterization. This work presents the Predictive and Distributed Routing Balancing (PR-DRB), a new method developed to gradually control network congestion, based on paths expansion, traffic distribution and effective traffic load, in order to maintain low latency values. PR-DRB monitors messages latencies on intermediate routers, makes decisions about alternative paths and record communication pattern information encountered during congestion situation. Based on the concept of applications repetitiveness, best solution recorded are reapplied when saved communication pattern re-appears. Traffic congestion experiments were conducted in order to evaluate the performance of the method, and improvements were observed.

Configuración de la entrada/salida paralela para el cómputo de altas prestaciones

La E/S Paralela es un área de investigación que tiene una creciente importancia en el cómputo de Altas Prestaciones. Si bien durante años ha sido el cuello de botella de los computadores paralelos en la actualidad, debido al gran aumento del poder de cómputo, el problema de la E/S se ha incrementado y la comunidad del Cómputo de Altas Prestaciones considera que se debe trabajar en mejorar el sistema de E/S de los computadores paralelos, para lograr cubrir las exigencias de las aplicaciones científicas que usan HPC. La Configuración de la Entrada/Salida (E/S) Paralela tiene una gran influencia en las prestaciones y disponibilidad, por ello es importante “Analizar configuraciones de E/S paralela para identificar los factores claves que influyen en las prestaciones y disponibilidad de la E/S de Aplicaciones Científicas que se ejecutan en un clúster”. Para realizar el análisis de las configuraciones de E/S se propone una metodología que permite identificar los factores de E/S y evaluar su influencia para diferentes configuraciones de E/S formada por tres fases: Caracterización, Configuración y Evaluación. La metodología permite analizar el computador paralelo a nivel de Aplicación Científica, librerías de E/S y de arquitectura de E/S, pero desde el punto de vista de la E/S. Los experimentos realizados para diferentes configuraciones de E/S y los resultados obtenidos indican la complejidad del análisis de los factores de E/S y los diferentes grados de influencia en las prestaciones del sistema de E/S. Finalmente se explican los trabajos futuros, el diseño de un modelo que de soporte al proceso de Configuración del sistema de E/S paralela para aplicaciones científicas. Por otro lado, para identificar y evaluar los factores de E/S asociados con la disponibilidad a nivel de datos, se pretende utilizar la Arquitectura Tolerante a Fallos RADIC.

Controladores PI con acción de reset

El control automàtic exerceix un paper important en molts processos de la industria. Cada un dels sistemes de control requereix d’un controlador, la majoria dels quals són del tipus PI. L’objectiu d’aquest projecte es investigar tècniques que permetin superar les limitacions que tenen els controladors PI lineals. En la resposta d’un sistema de control es poden distingir dues tasques diferents: El seguiment a un canvi d’entrada o consigna correspon a la tasca de servo, mentre que el rebuig a pertorbacions correspon a la tasca de regulatori. Al típic esquema de control realimentat, aquestes dues tasques estan enfrontades, és a dir, una millora a la tasca de servo implica un empitjorament a la tasca de regulatori i a l’inversa. Això suposa un problema al rendiment del sistema, així com la necessitat d’establir un cert compromís entre les dues tasques. El que es pretén en aquest projecte es implementar senzilles regles de control no lineal amb la finalitat de millorar el rendiment del sistema i evitar la necessitat d’establir un compromís entre les dues tasques. Així, es pretén superar les limitacions que aquest té, obtenint controladors PI alternatius fàcilment sintetitzables.

Feasibility and electromagnetic compatibility study of the ClearPEM front-end electronics for simultaneous PET-MR imaging

In this work we present a first feasibility study of the ClearPEM technology for simultaneous PET-MR imaging. The mutual electromagnetic interference (EMI) effects between both systems were evaluated on a 7 T magnet by characterizing the response behavior of the ClearPEM detectors and front-end electronics to pulsed RF power and switched magnetic field gradients; and by analyzing the MR system performance degradation from noise pickup into the RF receiver chain, and from magnetic susceptibility artifacts caused by PET front-end materials.

Sistema d'adquisició de temperatures de 2 canals via R.F.

Poder mesurar i enregistrar diferents tipus de magnituds com pressió, força, temperatura etc. s’ha convertit en una necessitat per moltes aplicacions actuals. Aquestes magnituds poden tenir procedències molt diverses, tals com l’entorn, o poden ser generades per sistemes mecànics, elèctrics, etc. Per tal de poder adquirir aquestes magnituds, s’utilitzen els sistemes d’adquisició de dades. Aquests sistemes, prenen mostres analògiques del món real, i les transformen en dades digitals que poden ser manipulades per un sistema electrònic. Pràcticament qualsevol magnitud es pot mesurar utilitzant el sensor adient. Una magnitud molt utilitzada en sistemes d’adquisició de dades, és la temperatura. Els sistemes d’adquisició de temperatures estan molt generalitzats, i podem trobar-los com a sistemes, on l’objectiu és mostrar les dades adquirides, o podem trobar-los formant part de sistemes de control, aportant uns inputs necessaris per el seu correcte funcionament, garantir-ne l’estabilitat, seguretat etc. Aquest projecte, promogut per l’empresa Elausa, s’encarregarà d’adquirir, el senyal d’entrada de 2 Termoparells. Aquests mesuraran temperatures de circuits electrònics, que es trobaran dintre la càmera climàtica de Elausa, sotmesos a diferents condicions de temperatura, per tal de rebre l’homologació del circuit. El sistema haurà de poder mostrar les dades adquirides en temps real, i emmagatzemar-les en un PC que estarà ubicat en una oficina, situada a uns 30 m de distància de la sala on es farà el test. El sistema constarà d’un circuit electrònic que adquirirà, i condicionarà el senyal de sortida dels termoparells, per adaptar-lo a la tensió d’entrada d’un convertidor analògic digital, del microcontrolador integrat en aquesta placa. Seguidament aquesta informació, s’enviarà a través d’un mòdul transmissor de radiofreqüència, cap al PC on es visualitzaran les dades adquirides. Els objectius plantejats són els següents: - Dissenyar el circuit electrònic d’adquisició i condicionament del senyal. - Dissenyar, fabricar i muntar el circuit imprès de la placa d’adquisició. - Realitzar el programa de control del microcontrolador. - Realitzar el programa per presentar i desar les dades en un PC. - El sistema ha d’adquirir 2 temperatures, a través de Termoparells amb un rang d’entrada de -40ºC a +240ºC - S’ha de transmetre les dades via R.F. Els resultats del projecte han estat satisfactoris i s’han complert els objectius plantejats.

Iowa Aviation Plan, 2004-2024

The Iowa Department of Transportation (DOT), working closely with the Federal Aviation Administration (FAA), strives to ensure that Iowa’s system of public airports is positioned to meet the needs of businesses, residents, and visitors to our state. Airports must be accessible and positioned to safely meet different levels of aviation activity. In partnership with the FAA and various cities, counties, and airport authorities, the Iowa DOT helps to direct the systematic development of public airports. This report is a summary of a more comprehensive technical report that outlines a strategic plan for improving the performance of airports in Iowa over the next 20 years. More information on the technical report and on individual reports prepared for each of the public airports can be obtained from the Iowa DOT, Office of Aviation website at www.iawings.com. The Iowa Aviation System Plan provides the Iowa DOT with an important tool to monitor the ability of airports to meet customer needs. The plan also provides a means to measure the effects of investment on the performance of the Iowa Aviation System. Over the next 20 years, federal, state, local, and private funding will be needed to ensure that the aviation system meets goals established in this study. It is estimated that at least $821 million will be needed over the next 20 years if airports in Iowa are to respond to objectives set by the system plan. In future years, the plan will enable the Iowa DOT to measure system performance. By tracking key indicators for the airport system, it will be possible for the Iowa DOT and the FAA to formulate strategies for responding to Iowa’s air transportation needs. The Iowa Aviation System Plan provides a guide for the state and its communities to ensure that the vision established for the Iowa Aviation System can be achieved.

Iowa Aviation Plan, 2004-2024

The Iowa Department of Transportation (DOT), working closely with the Federal Aviation Administration (FAA), strives to ensure that Iowa’s system of public airports is positioned to meet the needs of businesses, residents, and visitors to our state. Airports must be accessible and positioned to safely meet different levels of aviation activity. In partnership with the FAA and various cities, counties, and airport authorities, the Iowa DOT helps to direct the systematic development of public airports. This report is a summary of a more comprehensive technical report that outlines a strategic plan for improving the performance of airports in Iowa over the next 20 years. More information on the technical report and on individual reports prepared for each of the public airports can be obtained from the Iowa DOT, Office of Aviation website at www.iawings.com. The Iowa Aviation System Plan provides the Iowa DOT with an important tool to monitor the ability of airports to meet customer needs. The plan also provides a means to measure the effects of investment on the performance of the Iowa Aviation System. Over the next 20 years, federal, state, local, and private funding will be needed to ensure that the aviation system meets goals established in this study. It is estimated that at least $821 million will be needed over the next 20 years if airports in Iowa are to respond to objectives set by the system plan. In future years, the plan will enable the Iowa DOT to measure system performance. By tracking key indicators for the airport system, it will be possible for the Iowa DOT and the FAA to formulate strategies for responding to Iowa’s air transportation needs. The Iowa Aviation System Plan provides a guide for the state and its communities to ensure that the vision established for the Iowa Aviation System can be achieved.

Medicaid Value Management Program SFY 2008 Report Executive Summary, 2007

In June, 2007, the Commonwealth Fund released a report entitled, “Aiming Higher: Results from a State Scorecard on Health System Performance.” The report ranked states’ health care performance based upon four areas: access, quality, potentially avoidable use of hospitals and costs of care, and healthy lives. Iowa was ranked second overall and was the only state to rank in the top 25 percent on each of the four measures.1 Coupling the HEDIS measures and CAHPS survey results with the Commonwealth report outcomes provides additional information for determining how the state performs with regard to the health care system, in general, and the Medicaid program specifically. For the past five years the results of eight outcome measures encompassing children and adults, and preventive, chronic and acute care have been reported by the University of Iowa Public Policy Center (PPC). The PPC is the independent evaluator for the Medicaid managed care programs and assists the state in an effort to understand the process of care within the Medicaid program. Seven of the eight measures are recommended by the Centers for Medicare and Medicaid, while the eighth, annual dental visit, is used in recognition of the challenges found in providing dental care to Medicaid‐enrolled children and adults.

A Feasibility Study on Embedded Micro-Electromechanical Sensors and Systems (MEMS) for Monitoring Highway Structures, TR-575, 2011

Micro-electromechanical systems (MEMS) provide vast improvements over existing sensing methods in the context of structural health monitoring (SHM) of highway infrastructure systems, including improved system reliability, improved longevity and enhanced system performance, improved safety against natural hazards and vibrations, and a reduction in life cycle cost in both operating and maintaining the infrastructure. Advancements in MEMS technology and wireless sensor networks provide opportunities for long-term continuous, real-time structural health monitoring of pavements and bridges at low cost within the context of sustainable infrastructure systems. The primary objective of this research was to investigate the use of MEMS in highway structures for health monitoring purposes. This study focused on investigating the use of MEMS and their potential applications in concrete through a comprehensive literature review, a vendor survey, and a laboratory study, as well as a small-scale field study. Based on the comprehensive literature review and vendor survey, the latest information available on off-the-shelf MEMS devices, as well as research prototypes, for bridge, pavement, and traffic applications were synthesized. A commercially-available wireless concrete monitoring system based on radio-frequency identification (RFID) technology and off-the-shelf temperature and humidity sensors were tested under controlled laboratory and field conditions. The test results validated the ability of the RFID wireless concrete monitoring system in accurately measuring the temperature both inside the laboratory and in the field under severe weather conditions. In consultation with the project technical advisory committee (TAC), the most relevant MEMS-based transportation infrastructure research applications to explore in the future were also highlighted and summarized.

Behavioural queueing : cellular automata and a laboratory experiment

Dans cette thèse, nous étudions les aspects comportementaux d'agents qui interagissent dans des systèmes de files d'attente à l'aide de modèles de simulation et de méthodologies expérimentales. Chaque période les clients doivent choisir un prestataire de servivce. L'objectif est d'analyser l'impact des décisions des clients et des prestataires sur la formation des files d'attente. Dans un premier cas nous considérons des clients ayant un certain degré d'aversion au risque. Sur la base de leur perception de l'attente moyenne et de la variabilité de cette attente, ils forment une estimation de la limite supérieure de l'attente chez chacun des prestataires. Chaque période, ils choisissent le prestataire pour lequel cette estimation est la plus basse. Nos résultats indiquent qu'il n'y a pas de relation monotone entre le degré d'aversion au risque et la performance globale. En effet, une population de clients ayant un degré d'aversion au risque intermédiaire encoure généralement une attente moyenne plus élevée qu'une population d'agents indifférents au risque ou très averses au risque. Ensuite, nous incorporons les décisions des prestataires en leur permettant d'ajuster leur capacité de service sur la base de leur perception de la fréquence moyenne d'arrivées. Les résultats montrent que le comportement des clients et les décisions des prestataires présentent une forte "dépendance au sentier". En outre, nous montrons que les décisions des prestataires font converger l'attente moyenne pondérée vers l'attente de référence du marché. Finalement, une expérience de laboratoire dans laquelle des sujets jouent le rôle de prestataire de service nous a permis de conclure que les délais d'installation et de démantèlement de capacité affectent de manière significative la performance et les décisions des sujets. En particulier, les décisions du prestataire, sont influencées par ses commandes en carnet, sa capacité de service actuellement disponible et les décisions d'ajustement de capacité qu'il a prises, mais pas encore implémentées. - Queuing is a fact of life that we witness daily. We all have had the experience of waiting in line for some reason and we also know that it is an annoying situation. As the adage says "time is money"; this is perhaps the best way of stating what queuing problems mean for customers. Human beings are not very tolerant, but they are even less so when having to wait in line for service. Banks, roads, post offices and restaurants are just some examples where people must wait for service. Studies of queuing phenomena have typically addressed the optimisation of performance measures (e.g. average waiting time, queue length and server utilisation rates) and the analysis of equilibrium solutions. The individual behaviour of the agents involved in queueing systems and their decision making process have received little attention. Although this work has been useful to improve the efficiency of many queueing systems, or to design new processes in social and physical systems, it has only provided us with a limited ability to explain the behaviour observed in many real queues. In this dissertation we differ from this traditional research by analysing how the agents involved in the system make decisions instead of focusing on optimising performance measures or analysing an equilibrium solution. This dissertation builds on and extends the framework proposed by van Ackere and Larsen (2004) and van Ackere et al. (2010). We focus on studying behavioural aspects in queueing systems and incorporate this still underdeveloped framework into the operations management field. In the first chapter of this thesis we provide a general introduction to the area, as well as an overview of the results. In Chapters 2 and 3, we use Cellular Automata (CA) to model service systems where captive interacting customers must decide each period which facility to join for service. They base this decision on their expectations of sojourn times. Each period, customers use new information (their most recent experience and that of their best performing neighbour) to form expectations of sojourn time at the different facilities. Customers update their expectations using an adaptive expectations process to combine their memory and their new information. We label "conservative" those customers who give more weight to their memory than to the xiv Summary new information. In contrast, when they give more weight to new information, we call them "reactive". In Chapter 2, we consider customers with different degree of risk-aversion who take into account uncertainty. They choose which facility to join based on an estimated upper-bound of the sojourn time which they compute using their perceptions of the average sojourn time and the level of uncertainty. We assume the same exogenous service capacity for all facilities, which remains constant throughout. We first analyse the collective behaviour generated by the customers' decisions. We show that the system achieves low weighted average sojourn times when the collective behaviour results in neighbourhoods of customers loyal to a facility and the customers are approximately equally split among all facilities. The lowest weighted average sojourn time is achieved when exactly the same number of customers patronises each facility, implying that they do not wish to switch facility. In this case, the system has achieved the Nash equilibrium. We show that there is a non-monotonic relationship between the degree of risk-aversion and system performance. Customers with an intermediate degree of riskaversion typically achieve higher sojourn times; in particular they rarely achieve the Nash equilibrium. Risk-neutral customers have the highest probability of achieving the Nash Equilibrium. Chapter 3 considers a service system similar to the previous one but with risk-neutral customers, and relaxes the assumption of exogenous service rates. In this sense, we model a queueing system with endogenous service rates by enabling managers to adjust the service capacity of the facilities. We assume that managers do so based on their perceptions of the arrival rates and use the same principle of adaptive expectations to model these perceptions. We consider service systems in which the managers' decisions take time to be implemented. Managers are characterised by a profile which is determined by the speed at which they update their perceptions, the speed at which they take decisions, and how coherent they are when accounting for their previous decisions still to be implemented when taking their next decision. We find that the managers' decisions exhibit a strong path-dependence: owing to the initial conditions of the model, the facilities of managers with identical profiles can evolve completely differently. In some cases the system becomes "locked-in" into a monopoly or duopoly situation. The competition between managers causes the weighted average sojourn time of the system to converge to the exogenous benchmark value which they use to estimate their desired capacity. Concerning the managers' profile, we found that the more conservative Summary xv a manager is regarding new information, the larger the market share his facility achieves. Additionally, the faster he takes decisions, the higher the probability that he achieves a monopoly position. In Chapter 4 we consider a one-server queueing system with non-captive customers. We carry out an experiment aimed at analysing the way human subjects, taking on the role of the manager, take decisions in a laboratory regarding the capacity of a service facility. We adapt the model proposed by van Ackere et al (2010). This model relaxes the assumption of a captive market and allows current customers to decide whether or not to use the facility. Additionally the facility also has potential customers who currently do not patronise it, but might consider doing so in the future. We identify three groups of subjects whose decisions cause similar behavioural patterns. These groups are labelled: gradual investors, lumpy investors, and random investor. Using an autocorrelation analysis of the subjects' decisions, we illustrate that these decisions are positively correlated to the decisions taken one period early. Subsequently we formulate a heuristic to model the decision rule considered by subjects in the laboratory. We found that this decision rule fits very well for those subjects who gradually adjust capacity, but it does not capture the behaviour of the subjects of the other two groups. In Chapter 5 we summarise the results and provide suggestions for further work. Our main contribution is the use of simulation and experimental methodologies to explain the collective behaviour generated by customers' and managers' decisions in queueing systems as well as the analysis of the individual behaviour of these agents. In this way, we differ from the typical literature related to queueing systems which focuses on optimising performance measures and the analysis of equilibrium solutions. Our work can be seen as a first step towards understanding the interaction between customer behaviour and the capacity adjustment process in queueing systems. This framework is still in its early stages and accordingly there is a large potential for further work that spans several research topics. Interesting extensions to this work include incorporating other characteristics of queueing systems which affect the customers' experience (e.g. balking, reneging and jockeying); providing customers and managers with additional information to take their decisions (e.g. service price, quality, customers' profile); analysing different decision rules and studying other characteristics which determine the profile of customers and managers.

Maximum likelihood Linear Programming Data Fusion for Speaker Recognition

Biometric system performance can be improved by means of data fusion. Several kinds of information can be fused in order to obtain a more accurate classification (identification or verification) of an input sample. In this paper we present a method for computing the weights in a weighted sum fusion for score combinations, by means of a likelihood model. The maximum likelihood estimation is set as a linear programming problem. The scores are derived from a GMM classifier working on a different feature extractor. Our experimental results assesed the robustness of the system in front a changes on time (different sessions) and robustness in front a change of microphone. The improvements obtained were significantly better (error bars of two standard deviations) than a uniform weighted sum or a uniform weighted product or the best single classifier. The proposed method scales computationaly with the number of scores to be fussioned as the simplex method for linear programming.

Fenix-järjestelmän suorituskyvyn analysointi

Kasvavat käyttäjämäärät TietoEnatorin Fenix-tietojärjestelmässä ovat nostaneet suorituskyvyn tutkinnan tärkeään asemaan. Suorituskykymittausten tekeminen, analysoiminen ja ennen kaikkea säännöllinen seuranta ovat ensiarvioisen tärkeitätoimenpiteitä järjestelmän tehokkuuden proaktiiviseen kehittämiseen. Fenixin suorituskykymittausjärjestelmän tuottamaa aineistoa on runsaasti tarjolla. Tämän työn tavoitteena on edistää suorituskykymittausjärjestelmän tuottaman aineiston käyttöä erilaisissa raportointi- ja tutkimustilanteissa. Työssäperehdytään aineiston keräämiseen, häiriösuodatukseen ja tulosten visualisointiin. Työn tuloksena syntyy automaattinen raportointijärjestelmä, joka tuottaa palvelukohtaisia tilastollisia suorituskykyraportteja. Raporttien tarkoituksena on tuoda kehittäjien nähtäville palveluista kerätyt mittaustulokset ja osoittaa mahdollisia suorituskykyparannuskohteita.

Yrityksen strategisen ohjauksen tehostaminen. Case: Balanced scorecard implementointi

Tutkielman päätavoitteena on tutkia mitä lisäarvoa yritys saa ottaessaan Balanced scorecardin käyttöönsä ja miten käyttöönottoprosessi tulee suorittaa, jotta määritellyt lisäarvot realisoituvat. Teoreettisena lähtökohtana on Toivasen käyttöönottoprojektimalli. Tutkielmassa tullaan keskittymään mittariston käyttöönottoprosessiin ja käyttöönoton vaikutuksiin. Tutkielman päätutkimusmenetelmä on toiminta-analyyttinen case-tutkimus. Empiirinen aineisto kerätään puolistrukturoitujen teemahaastattelujen ja osallistuvan havainnoinnin avulla. Tutkimustulosten mukaan merkittävimmät Balanced scorecardin mukanaan tuomat lisäarvot yritykselle ovat kokonaisvaltaisempi ja johdonmukaisempi yrityksen ohjaus, parantunut suorituskyvyn mittaus ja seuranta, sekä strategian jalkautuksen tehostuminen. Käyttöönoton onnistumisen kannalta kriittisimmät tekijät ovat johdon sitoutuneisuus, vision ja strategian selkeys, selkeä päätös projektin aloittamiseksi, sekä mittareiden valinta ja tavoitetasojen asettaminen niille.