Resistance to malathion and lambda-cyhalothrin in Ceratitis capitata (Wiedemann) (Diptera: Tephritidae)

La mosca mediterránea de la fruta, Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), es una de las plagas de mayor incidencia económica en cítricos y otros frutales a nivel mundial. En España las medidas de control de esta plaga en cítricos, desde mediados de los 90 hasta 2009, se basaron principalmente en el monitoreo de las poblaciones y en la aplicación de tratamientos aéreos y terrestres con malatión cebo. Sin embargo, desde la retirada en la Unión Europea en 2009 de los productos fitosanitarios que contienen malatión, los insecticidas más utilizados para el control de esta plaga han sido lambda-cihalotrina y spinosad. En 2004-2005 se detectaron poblaciones españolas de C. capitata resistentes a malatión. Esta resistencia se ha asociado a una mutación (G328A) en la acetilcolinesterasa (AChE), a una duplicación del gen de la AChE (Ccace2) (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas (posiblemente aliesterasas). Sin embargo, cuando se secuenció la aliesterasa CcE7 en individuos de una línea resistente a malatión, no se encontró ninguna de las mutaciones (G137D y/o W251L/S/G) asociadas a resistencia en otras especies, si bien se encontraron otras mutaciones al compararlos con individuos de una línea susceptible. Asimismo, mediante la selección en laboratorio de una línea resistente a malatión (W-4Km) con lambda-cihalotrina, se ha podido obtener una línea resistente a lambda-cihalotrina (W-1K). Finalmente, se ha demostrado la capacidad de esta especie para desarrollar resistencia a spinosad mediante selección en laboratorio. Los múltiples mecanismos de resistencia identificados evidencian el potencial de esta especie para desarrollar resistencia a insecticidas con diferentes modos de acción. Los objetivos de esta tesis doctoral son: 1) evaluar la susceptibilidad de poblaciones españolas de campo de C. capitata a lambda-cihalotrina y dilucidar los mecanismos de resistencia en la línea W-1Kλ; 2) comparar la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A); y 3) investigar el papel de las mutaciones identificadas en la aliesterasa CcαE7 en la resistencia a malatión. Estos estudios son de utilidad para el desarrollo de estrategias de manejo de la resistencia que puedan prevenir o retrasar la aparición de resistencia y aumentar la sostenibilidad de los insecticidas disponibles para el control de esta plaga. Nuestros resultados indican que las poblaciones españolas de C. capitata analizadas han desarrollado resistencia a lambda-cihalotrina. Los valores de CL50 estimados para las poblaciones recogidas en la Comunidad Valenciana, Cataluña y Andalucía oscilaron entre 129 ppm y 287 ppm, igualando o sobrepasando la concentración recomendada para los tratamientos de campo (125 ppm). Estos resultados contrastan con los obtenidos con tres poblaciones de campo recogidas en Túnez, cuya susceptibilidad fue similar a la de la línea control (C). La línea resistente a lambda-cihalotrina W-1K se continuó seleccionando en el laboratorio alcanzándose unos niveles de resistencia de 205 veces con respecto a la línea C, siendo su CL50 (4224 ppm) más de 30 veces superior a la concentración recomendada para los tratamientos de campo. Esta línea resistente mostró altos niveles de resistencia cruzada a deltametrina (150 veces) y a etofenprox (240 veces), lo que sugiere que el desarrollo de resistencia a lambda-cihalotrina podría comprometer la eficacia de otros piretroides para el control de esta plaga. Hemos demostrado que la resistencia de la línea W-1K a lambda-cihalotrina fue casi completamente suprimida por el sinergista PBO, lo que indica que las enzimas P450 desempeñan un papel muy importante en la resistencia a este insecticida. Sin embargo, tanto las moscas de la línea susceptible C como las de la línea resistente W-1K perdieron inmediatamente la capacidad de caminar (efecto “knock-down”) al ser tratadas tópicamente con lambda-cihalotrina, lo que sugiere que la resistencia no está mediada por alteraciones en la molécula diana (resistencia tipo “kdr”). La resistencia metabólica mediada por P450 fue analizada comparando la expresión de 53 genes CYP (codifican enzimas P450) de las familias CYP4, CYP6, CYP9 y CYP12 en adultos de la línea resistente W-1K y de la línea susceptible C. Nuestros resultados muestran que el gen CYP6A51 (número de acceso GenBank XM_004534804) fue sobreexpresado (13-18 veces) en la línea W-1K. Por otra parte, la expresión del gen CYP6A51 fue inducida tanto en adultos de la línea W-1K como de la línea C al ser tratados con lambda-cihalotrina. Sin embargo, no se obtuvieron diferencias significativas entre la línea susceptible C y la línea resistente W-1K al comparar la cantidad de P450 y la actividad NADPH-citocromo c reductasa presente en fracciones microsomales obtenidas a partir de abdómenes. Asimismo, no hemos podido correlacionar el metabolismo de deltametrina, estimado in vitro mediante la incubación de este insecticida con fracciones microsomales, con el nivel de resistencia a este piretroide observado en los bioensayos con la línea W-1K. Por otro lado, no se encontró ninguna alteración en la región promotora 5'UTR del gen CYP6A51 (-500 pb desde el inicio de la traducción) que pudiera explicar su sobreexpresión en la línea W-1K. Los datos obtenidos sugieren que la resistencia a lambda-cihalotrina en la línea W-1K está mediada por P450 y que la sobreexpresión de CYP6A51 puede desempeñar un papel importante, aunque se necesitan más evidencias para establecer una asociación directa de la resistencia con este gen. Hemos estudiado la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A). La línea susceptible C, donde no se encuentra la mutación G328A (genotipo S/S), se cruzó con dos isolíneas establecidas para representar genotipos únicos correspondientes a los dos mecanismos de resistencia asociados a la molécula diana: 1) la isolínea 267Y (genotipo R/R) establecida a partir de una pareja que portaba la mutación G328A en homocigosis; 2) la isolínea 306TY (genotipo RS/RS) establecida a partir de una pareja que portaba en homocigosis la duplicación del gen Ccace2. No se realizaron cruces recíprocos, ya que mediante experimentos de hibridación in situ en cromosomas politénicos se pudo comprobar que el locus de la AChE y la duplicación (probablemente en tándem) se localizan en el cromosoma autosómico 2L. La susceptibilidad al malatión de los parentales resistentes (R/R o RS/RS) y susceptibles (S/S), los cruces F1 (S/R, S/RS y R/RS) y los retrocruzamientos indican que la resistencia a malatión es semi-dominante en ambos casos. Sin embargo, nuestros resultados no fueron concluyentes con respecto a la naturaleza monogénica de la resistencia a malatión en estas isolíneas. Por lo tanto, no podemos descartar que otros genes que contribuyan a la resistencia, además de la mutación G328A (isolínea 267Y) y de la duplicación del gen Ccace2 (isolínea 306TY), puedan haber sido seleccionados durante el proceso de selección de 267Y y 306TY. Varios parámetros biológicos fueron evaluados para determinar si estos dos mecanismos de resistencia a malatión suponen un coste biológico para los genotipos resistentes. Individuos con genotipo R/R mostraron un retraso en el tiempo de desarrollo de huevo a pupa, un peso de pupa reducido y una menor longevidad de los adultos, en comparación con los individuos con genotipo S/S. Sin embargo, el peso de pupa de los individuos con genotipo RS/RS fue similar al de los individuos S/S, y su desarrollo de huevo a pupa intermedio entre S/S y R/R. Estas diferencias en el coste biológico pueden estar relacionadas con la reducción de la eficiencia catalítica de la AChE mutada en los individuos R/R, y al efecto compensatorio que la copia no mutada del gen tiene en los individuos RS/RS que portan la duplicación. La estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación se analizó mediante el seguimiento de los caracteres de resistencia en la progenie de retrocruzamientos S/R x R/R y S/RS x RS/RS a lo largo de varias generaciones en ausencia de presión de selección con insecticidas. Nuestros resultados muestran que la frecuencia del alelo que porta la mutación G328A disminuyó desde 67,5% en la primera generación del retrocruzamiento S/R x R/R (75% esperado, asumiendo segregación mendeliana y que sólo hay dos alelos: uno mutado y otro no mutado) a 12% después de 10 generaciones. Por el contrario, la frecuencia de la duplicación sólo disminuyó desde 75% en en la primera generación del retrocruzamiento S/RS x RS/RS (75% esperado, asumiendo segregación Mendeliana y que la duplicación segrega como un único alelo) a 50% en el mismo período, lo que indica que la duplicación es más estable que la mutación. Asimismo, se analizó la presencia de la mutación y de la duplicación en poblaciones de campo recogidas en seis localidades en 2004-2007, cuando todavía se usaba el malatión, y se comparó con poblaciones recogidas en los mismos campos en 2010, un año después de la prohibición del malatión en la Unión Europea. La frecuencia media del genotipo susceptible (S/S) aumentó del 55,9% en el período 2004-2007 a 70,8% en 2010, mientras que la frecuencia de los genotipos portadores de la mutación en homocigosis o heterocigosis (R/R y S/R) disminuyó del 30,4 al 9,2%, los que llevan la duplicación en homocigosis o heterocigosis (RS/RS y S/RS) aumentaron levemente desde 12,8 hasta 13,3%, y los que llevan a la vez la mutación y la duplicación (R/RS) también aumentaron del 1 al 6,7%. Estos resultados son consistentes con que la duplicación del gen Ccace2 (con una copia con la mutación G328A y la otra copia no mutada) es más ventajosa que la mutación G328A por si sola, ya que la duplicación mantiene los niveles de resistencia a la vez que limita el coste biológico. Para investigar la asociación entre la resistencia a malatión y las mutaciones encontradas previamente en CcE7, hemos generado isolíneas con mutaciones específicas seleccionadas por su ubicación próxima a la entrada al centro activo de la enzima. La isolínea Sm2 (procedente de una hembra heterocigota para la mutación V96L y un macho homocigoto para el alelo no mutado) mantuvo altos niveles de resistencia a malatión, incluso después de 30 generaciones sin presión de selección. Por el contrario, la isolínea 267Y (compuesta por individuos homocigotos para la mutación L267Y) y la línea 306TY (compuesta por individuos homocigotos para la doble mutación R306T-N307Y) mostraron una reducción significativa en los niveles de resistencia. También hemos encontrado que la resistencia a malatión de la línea Sm2 fue parcialmente revertida por DEF y TPP, y que Sm2 mostró una reducción significativa en la actividad MTB, como se ha descrito en otras especies que muestran resistencia específica a malatión mediada por aliesterases. Además, fue posible asociar la presencia de la mutación V96L en individuos de la línea Sm2 con supervivencia a una concentración discriminante de malatión (5,000 ppm) y con una baja actividad MTB. Estos resultados sugieren una posible relación entre la mutación V96L en la aliesterasa CcE7 y la resistencia a malatión, aunque todavía no se puede concluir que la resistencia es causada por esta mutación, siendo necesarios más estudios para comprobar su contribución a la resistencia. En conclusión, se ha encontrado por primera vez resistencia a lambda-cihalotrina en poblaciones de campo de C. capitata, y nuestros resultados indican que las P450 son el principal mecanismo de resistencia en la línea W-1K. Esta situación se suma al caso previamente descrito de resistencia en campo a malatión asociada a la mutación G328A, a la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas. Nuestros resultados también indican que la alteración de la molécula diana AChE parece ser responsable de un cierto nivel de resistencia a malatión en C. capitata, que puede ser estimada como aproximadamente 25-40 veces para la mutación G328A y 40-60 veces para la duplicación; mientras que la resistencia mediada por esterasas y que ha sido asociada en este estudio con la mutación V96L en CcE7 puede conferir un efecto multiplicativo (por un factor de 5 a 10) aumentando la resistencia a malatión a 200-400 veces. Por otra parte, hemos demostrado que los insectos resistentes que llevan la duplicación tienen un coste biológico menor y muestran una estabilidad mayor que aquellos con la mutación G328A en ausencia de presión de selección con insecticidas. Esto representa un escenario en el que los genotipos con la duplicación permanecerán en el campo en frecuencias bajas a moderadas, pero podrían ser seleccionados rápidamente si se utilizan malatión u otros insecticidas que muestren resistencia cruzada. Estos resultados tienen importantes implicaciones para los programas de manejo de la resistencia, ya que el repertorio de insecticidas eficaces para el control de C. capitata es cada vez más limitado. Además, la coexistencia de múltiples mecanismos de resistencia en poblaciones de campo ofrece el potencial para desarrollar resistencia frente a otros insecticidas disponibles para el control de esta plaga. Estrategias para de manejo de la resistencia basadas en la alternancia de insecticidas con diferentes modos de acción, y su combinación con otros métodos de control, deben ser implementadas para evitar el desarrollo de resistencia en campo. ABSTRACT The Mediterranean fruit fly (Medfly), Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), is one of the most economically damaging pests of citrus and other fruit crops worldwide. Control measures in citrus crops in Spain from the mid 90's to 2009 were mainly based on field monitoring of population levels and aerial and ground treatments with malathion bait sprays. However, since the withdrawal of phytosanitary products containing malathion in the European Union in 2009, lambda-cyhalothrin and spinosad have become the most widely used insecticides for the control of this pest. Resistance to malathion was found in Spanish field populations of C. capitata in 2004-2005. This resistance has been associated with a mutation G328A in the acetylcholinesterase (AChE), a duplication of the AChE gene (Ccace2) (one of the copies bearing the mutation G328A), and metabolic resistance mediated by esterases (probably aliesterases). However, when the gene of the aliesterase CcE7 was sequenced in individuals from a malathion resistant strain of C. capitata, none of the known G137D and/or W251L/S/G mutations associated to resistance in other species were found, though other mutations were detected when compared with individuals from a susceptible strain. Noteworthy, a lambda-cyhalothrin resistant strain (W-1K) was obtained by selecting a field-derived malathion resistant strain (W-4Km) with lambda-cyhalothrin. Moreover, it has also been demonstrated the capacity of this species to develop resistance to spinosad by laboratory selection. The multiple resistance mechanisms identified highlight the potential of this species to develop resistance to insecticides with different modes of action. The objectives of this PhD Thesis are: 1) to assess the susceptibility of Spanish field populations of C. capitata to lambda-cyhalothrin and to elucidate the resistance mechanisms in the W-1Kλ strain; 2) to compare the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A); and 3) to investigate the role of the aliesterase CcαE7 mutations in malathion resistance. All these studies will be of use for devising proactive resistance management strategies that could prevent or delay resistance development and would increase the sustainability of the insecticides available for Medfly control. Our results indicate that Spanish field populations of C. capitata have developed resistance to lambda-cyhalothrin. The LC50 values estimated for populations collected at Comunidad Valenciana, Cataluña and Andalucía ranged from 129 ppm to 287 ppm, equaling or overpassing the recommended concentration for field treatments (125 ppm). These results contrast with those obtained with three different Tunisian field populations, whose susceptibility was similar to that of the control (C) strain. The lambda-cyhalothrin resistant W-1K strain has been further selected to achieve a 205-fold resistance compared to the C strain, being its LC50 (4,224 ppm) more than 30 times higher than the recommended concentration for field applications. This resistant strain showed high levels of cross-resistance to deltamethrin (150-fold) and etofenprox (240-fold), suggesting that the development of resistance to lambda-cyhalothrin may compromise the effectiveness of other pyrethroids for the control of this species. We have shown that the resistance of the W-1K strain to lambda-cyhalothrin was almost completely suppressed by the synergist PBO, indicating that P450 enzymes play a very important role in resistance to this insecticide. However, both susceptible C and resistant W-1K flies were knocked down after topical treatment with lambda-cyhalothrin, suggesting that kdr resistance mediated by alterations of the target site is not playing a major role. Metabolic resistance mediated by P450 was further analyzed by comparing the expression of 53 genes of the families CYP4, CYP6, CYP9 and CYP12 in adults flies from the resistant W-1K and the susceptible C strains. We found that the gene CYP6A51 (GenBank accession number XM_004534804) was overexpressed (13-18-fold) in the W-1K strain. Moreover, the expression of the CYP6A51 gene was induced when adults of the W-1K and C strains were treated with lambda-cyhalothrin. However, no significant differences were obtained between susceptible C and resistant W-1K strains for the quantity of P450 and for the activity of NADPH- cytochrome c reductase measured in microsomal fractions obtained from abdomens. Moreover, we failed to correlate the metabolism of deltamethrin, analyzed in vitro by incubating this insecticide with microsomal fractions, with the resistance level against this pyrethroid observed in bioassays with W-1K. The sequencing of the 5´UTR region of the CYP6A51 gene failed in finding an alteration in the promoter region (-500 bp from translation start site) that could explain overexpression in the W-1K strain. All data obtained suggest that resistance to lambda-cyhalothrin in the W- 1K strain is mediated by P450 and that overexpression of CYP6A51 may play a major role, although further evidences are needed to establish a direct association of resistance with this gene. We have studied the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A). The malathion-susceptible C strain where the G328A mutation is not found (S/S genotype) was crossed with two isolines established to represent unique genotypes corresponding to the two target-site resistance mechanisms: 1) the 267Y isoline (genotype R/R) was established from a couple bearing the mutation G328A in homozygosis; and 2) the 306TY isoline (genotype RS/RS) was established from a couple being homozygous for the duplication of the Ccace2 gene. Reciprocal crosses have not been performed, since in situ hybridization on polythene chromosomes showed that the AChE locus and the duplication (most probably in tandem) are placed at the autosomal chromosome 2L. Mortality responses to malathion of resistant isolines (R/R or RS/RS) and susceptible (S/S) genotypes, F1 crosses (S/R, S/RS, and R/RS), and the back-crosses indicated that resistance to malathion is inherited as a semi-dominant trait in both cases. However, our results were not conclusive about the monogenic nature of the resistance to malathion in these isolines. Thus, we can not discard that other genes contributing to resistance, in addition to the mutation G328A (isoline 267Y) and the duplication of the Ccace2 gene (isoline 306TY), may have been selected during the selection process of 267Y and 306TY. Several biological parameters were evaluated to determine if these two malathion resistance mechanisms impose a fitness cost for resistant genotypes. Individuals with genotype R/R have a reduced fitness in terms of developmental time from egg to pupa, pupal weight and adult longevity, when compared to susceptible individuals (genotype S/S). Interestingly, the fitness cost was substantially diminished in individuals with genotype RS/RS. These differences in fitness may be related to the reduction of the catalytic efficiency of mutated AChE in individuals R/R, and the compensatory effect that the non-mutated copy of the gene has on individuals RS/RS bearing the duplication. The stability of malathion reistance associated with the mutation G328A or the duplication was analyzed by following these resistant traits in the progeny of the back-crosses S/RS x RS/RS and S/R x R/R over consecutive generations in the absence of insecticide selection pressure. Our results show that the frequency of the allele bearing the mutation G328A decreased from 67.5% at the first generation of the back-cross S/R x R/R (75% expected, assuming Mendelian segregation and that there are only two alleles: one mutated and the other non-mutated) to 12% after 10 generations. By contrast, the frequency of the duplication only declined from 75% at the first generation of the back-cross S/RS x RS/RS (75% expected, assuming Mendelian segregation and that the duplication segregates as an unique allele) to 50% in the same period, indicating that the duplication is more stable than the mutation. The presence of the mutation and the duplication was analyzed in field populations collected in six localities in 2004-2007, when malathion was still used, and compared to populations collected in the same fields in 2010, one year after the prohibition of malathion in the European Union. The average frequency of the susceptible genotype (S/S) increased from 55.9% in the period 2004-2007 to 70.8% in 2010, whereas the frequency of those genotypes carrying the mutation in homozygosis or heterozygosis (R/R and S/R) declined from 30.4 to 9.2%, those carrying the duplication in homozygosis or heterozygosis (RS/RS and S/RS) increased slightly from 12.8 to 13.3%, and those carrying both the mutation and the duplication (R/RS) also increased from 1 to 6.7%. These results are consistent with the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A and the other copy non-mutated) being more advantageous than the G328A mutation alone by maintaining resistance while restoring part of the fitness. In order to investigate the association of malathion resistance with mutations previously found in the aliesterase CcE7, we have generated isolines bearing specific mutations selected by their putative location near the upper part of the active site gorge of the enzyme. The isoline Sm2 (originating from a female heterozygous for the mutation V96L and a male homozygous for the non-mutated allele) kept high levels of resistance to malathion, even after 30 generations without selection pressure. On the contrary, the isoline 267Y (composed by individuals homozygous for the mutation L267Y) and the strain 306TY (composed by homozygous for the double mutation R306T-N307Y) showed a significant reduction in the levels of resistance. We have found also that resistance to malathion in the Sm2 isoline was partially reverted by DEF and TPP, and that Sm2 showed a significant reduction in MTB activity, as reported for other species showing malathion-specific resistance mediated by aliesterases. Besides, it was possible to associate the presence of the mutation V96L in individuals from the Sm2 isoline with both survival to a discriminating concentration of malathion (5,000 ppm) and low MTB activity. Our results point out to a possible connection betwen the mutation V96L in the aliesterase CcE7 and resistance to malathion, though we can not yet conclude that the resistance is caused by the mutation, being needed further work to understand its contribution to resistance. In conclusion, resistance to lambda-cyhalothrin has been found for the first time in field populations of C. capitata, and metabolic resistance mediated by P450 appears to be the main resistance mechanism in the resistant strain W-1K. These findings add to the previously reported case of field resistance to malathion, associated to the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A) and to metabolic resistance mediated by esterases. Our results also indicate that altered target site AChE appears to be responsible for a certain level of resistance to malathion in C. capitata, that can be estimated as about 25-40-fold for the mutation G328A and 40-60-fold for the duplication; whereas metabolic resistance mediated by esterases and associated in this study with the mutation V96L in CcE7 may confer a multiplicative effect (by a factor of 5 to10) increasing malathion resistance to 200-400-fold. Moreover, we have shown that resistant insects carrying the duplication have better fitness and exhibit a higher stability than those with the mutation G328A in the absence of insecticide pressure. This represents a scenario where genotypes with the duplication will remain in the field at low to moderate frequencies, but could be rapidly selected if malathion or other insecticides showing cross-resistance are used. These findings have important implications for resistance management programs, as the repertoire of effective insecticides for C. capitata control is becoming very limited. Besides, multiple resistance mechanisms coexisting in field populations provide the potential to develop resistance to other available insecticides for the control of this pest. Appropriate resistance management strategies based on the alternation of insecticides with different modes of action, and their combination with other control methods, must then be implemented to avoid the evolution of resistance in the field.

From plant surface to plant metabolism: the uncertain fate of foliar-applied nutrients

The application of agrochemical sprays to the aerial parts of crop plants is an important agricultural practice world-wide. While variable effectiveness is often seen in response to foliar treatments, there is abundant evidence showing the beneficial effect of foliar fertilizers in terms of improving the metabolism, quality, and yields of crops. This mini-review is focused on the major bottlenecks associated with the uptake and translocation of foliar-applied nutrient solutions. A better understanding of the complex scenario surrounding the ultimate delivery of foliar-applied nutrients to sink cells and organs is essential for improving the effectiveness and performance of foliar fertilizers.

Sheath vaporization of a monodisperse fuel-spray jet

The group vaporization of a monodisperse fuel-spray jet discharging into a hot coflowing gaseous stream is investigated for steady flow by numerical and asymptotic methods with a two-continua formulation used for the description of the gas and liquid phases. The jet is assumed to be slender and laminar, as occurs when the Reynolds number is moderately large, so that the boundary-layer form of the conservation equations can be employed in the analysis. Two dimensionless parameters are found to control the flow structure, namely the spray dilution parameter 1, defined as the mass of liquid fuel per unit mass of gas in the spray stream, and the group vaporization parameter e, defined as the ratio of the characteristic time of spray evolution due to droplet vaporization to the characteristic diffusion time across the jet. It is observed that, for the small values of e often encountered in applications, vaporization occurs only in a thin layer separating the spray from the outer droplet-free stream. This regime of sheath vaporization, which is controlled by heat conduction, is amenable to a simplified asymptotic description, independent of ε,in which the location of the vaporization layer is determined numerically as a free boundary in a parabolic problem involving matching of the separate solutions in the external streams, with appropriate jump conditions obtained from analysis of the quasi-steady vaporization front. Separate consideration of dilute and dense sprays, corresponding, respectively, to the asymptotic limits λ<<1 and λ>>1, enables simplified descriptions to be obtained for the different flow variables, including explicit analytic expressions for the spray penetration distance.

Dynamics of thermal ignition of spray flames in mixing layers

Conditions are identified under which analyses of laminar mixing layers can shed light on aspects of turbulent spray combustion. With this in mind, laminar spray-combustion models are formulated for both non-premixed and partially premixed systems. The laminar mixing layer separating a hot-air stream from a monodisperse spray carried by either an inert gas or air is investigated numerically and analytically in an effort to increase understanding of the ignition process leading to stabilization of high-speed spray combustion. The problem is formulated in an Eulerian framework, with the conservation equations written in the boundary-layer approximation and with a one-step Arrhenius model adopted for the chemistry description. The numerical integrations unveil two different types of ignition behaviour depending on the fuel availability in the reaction kernel, which in turn depends on the rates of droplet vaporization and fuel-vapour diffusion. When sufficient fuel is available near the hot boundary, as occurs when the thermochemical properties of heptane are employed for the fuel in the integrations, combustion is established through a precipitous temperature increase at a well-defined thermal-runaway location, a phenomenon that is amenable to a theoretical analysis based on activation-energy asymptotics, presented here, following earlier ideas developed in describing unsteady gaseous ignition in mixing layers. By way of contrast, when the amount of fuel vapour reaching the hot boundary is small, as is observed in the computations employing the thermochemical properties of methanol, the incipient chemical reaction gives rise to a slowly developing lean deflagration that consumes the available fuel as it propagates across the mixing layer towards the spray. The flame structure that develops downstream from the ignition point depends on the fuel considered and also on the spray carrier gas, with fuel sprays carried by air displaying either a lean deflagration bounding a region of distributed reaction or a distinct double-flame structure with a rich premixed flame on the spray side and a diffusion flame on the air side. Results are calculated for the distributions of mixture fraction and scalar dissipation rate across the mixing layer that reveal complexities that serve to identify differences between spray-flamelet and gaseous-flamelet problems.

Flamelet structures in spray ignition

In typical liquid-fueled burners the fuel is injected as a high-velocity liquid jet that breaks up to form the spray. The initial heating and vaporization of the liquid fuel rely on the relatively large temperatures of the sourrounding gas, which may include hot combustion products and preheated air. The heat exchange between the liquid and the gas phases is enhanced by droplet dispersion arising from the turbulent motion. Chemical reaction takes place once molecular mixing between the fuel vapor and the oxidizer has occurred in mixing layers separating the spray flow from the hot air stream. Since in most applications the injection velocities are much larger than the premixed-flame propagation velocity, combustion stabilization relies on autoignition of the fuel-oxygen mixture, with the combustion stand-off distance being controlled by the interaction of turbulent transport, droplet heating and vaporization, and gas-phase chemical reactions. In this study, conditions are identified under which analyses of laminar flamelets canshed light on aspects of turbulent spray ignition. This study extends earlier fundamental work by Liñan & Crespo (1976) on ignition in gaseous mixing layers to ignition of sprays. Studies of laminar mixing layers have been found to be instrumental in developing un-derstanding of turbulent combustion (Peters 2000), including the ignition of turbulent gaseous diffusion flames (Mastorakos 2009). For the spray problem at hand, the configuration selected, shown in Figure 1, involves a coflow mixing layer formed between a stream of hot air moving at velocity UA and a monodisperse spray moving at velocity USUA. The boundary-layer approximation will be used below to describe the resulting sl ender flow, which exhibits different igniting behaviors depending on the characteristics of t he fuel. In this approximation, consideration of the case U A = U S enables laminar ignition distances to be related to ignition times of unstrained spray flamelets, thereby pro viding quantitative information of direct applicability in regions of low scala r dissipation-rate in turbulent reactive flows (see the discussion in pp. 181–186 of Peters (2000)) . This report is organized as follows. Effects of droplet dispersion dynamics on ignition of sprays in turbulent mixing layers are discussed in Section 2. The formulation f or ignition in laminar mixing layers is outlined in Sections 3 and 4. The results are presented in Section 5. In Section 6, the mixture-fraction field and associated scalar dissipat ion rates for spray ignition are discussed. Finally, some brief conclusions are drawn in Section 7.

Global variation in the genetic and biochemical basis of diamondback moth resistance to Bacillus thuringiensis

Insecticidal proteins from the soil bacterium Bacillus thuringiensis (Bt) are becoming a cornerstone of ecologically sound pest management. However, if pests quickly adapt, the benefits of environmentally benign Bt toxins in sprays and genetically engineered crops will be short-lived. The diamondback moth (Plutella xylostella) is the first insect to evolve resistance to Bt in open-field populations. Here we report that populations from Hawaii and Pennsylvania share a genetic locus at which a recessive mutation associated with reduced toxin binding confers extremely high resistance to four Bt toxins. In contrast, resistance in a population from the Philippines shows multilocus control, a narrower spectrum, and for some Bt toxins, inheritance that is not recessive and not associated with reduced binding. The observed variation in the genetic and biochemical basis of resistance to Bt, which is unlike patterns documented for some synthetic insecticides, profoundly affects the choice of strategies for combating resistance.

Fate of the children of Usnach [manuscript] /

Binding: Contemporary Niger morocco; gold-stamped title on front board; leather clasps; stamped on inside of back board "C. & C. McLeish".

Effects of boron foliar applications on vegetative and reproductive growth of sunflower

Foliar application may be used to supply boron (B) to a crop when B demands are higher than can be supplied via the soil. While B foliar sprays have been used to correct B deficiency in sunflower (Helianthus annuus L.) in the field, no studies have determined the amount of B taken up by sunflower plant parts via foliar application. A study was conducted in which sunflower plants were grown at constant B concentration in nutrient solution with adequate B (46 mum) or with limited B supply (0.24, 0.40 and 1.72 mum) using Amberlite IRA-743 resin to control B supply. At the late vegetative stage of growth (25 and 35 d after transplanting), two foliar sprays were applied of soluble sodium tetraborate (20.8 % B) each at 0, 28, 65, 120 and 1200 mm (each spray equivalent to 0, 0.03, 0.07, 0.13 and 1.3 kg B ha(-1) in 100 L water ha(-1)). The highest rate of B foliar fertilization resulted in leaf burn but had no other evident detrimental effect on plant growth. Under B-deficient conditions, B foliar application increased the vegetative and reproductive dry mass of plants. Foliar application of 28-1200 mm B increased the total dry mass of the most B-deficient plants by more than three-fold and that of plants grown initially with 1.72 mum B in solution by 37-49 %. In this latter treatment, the dry mass of the capitulum was similar to that achieved under control conditions, but in no instance was total plant dry mass similar to that of the control. All B foliar spray rates increased the B concentration in various parts of the plant tops, including those that developed after the sprays were applied, but the B concentration in the roots was not increased by B foliar application. The B concentration in the capitulum of the plants sprayed at the highest rate was between 37 and 93 % of that in the control plants. This study showed that B foliar application was of benefit to B-deficient sunflower plants, increasing the B status of plant tops, including that of the capitulum which developed after the B sprays were applied. (C) 2003 Annals of Botany Company.

Noninvasive localization of petroleum-derived spray oil in plants with chemical shift selective magnetic resonance imaging

Nuclear magnetic resonance (NMR) spectroscopy and magnetic resonance imaging (MRI) were used to detect petroleum-derived spray oils (PDSOs) in citrus seedlings and trees. The NMR spectrum of the phantom containing 10% (v/v) of a nC24 agricultural mineral oil (AMO) showed the resonance of the water protons at delta = 5 ppm, while the resonance of the oil protons at delta = 1.3 to 1.7 ppm. The peak resolution and the chemical shift difference of more than 3.3 ppm between water and oil protons effectively differentiated water and the oil. Chemical shift selective imaging (CSSI) was performed to localize the AMO within the stems of Citrus trifoliata L. seedlings after the application of a 4% (v/v) spray. The chemical shift selective images of the oil were acquired by excitation at delta = 1.5 ppm by averaging over 400 transients in each phase-encoding step. Oil was mainly detected in the outer cortex of stems within 10 d of spray application; some oil was also observed in the inner vascular bundle and pith of the stems at this point. CSSI was also applied to investigate the persistence of oil deposits in sprayed mature Washington navel orange (Citrus x aurantium L.) trees in an orchard. The trees were treated with either fourteen 0.25%, fourteen 0.5%, four 1.75%, or single 7% sprays of a nC23 horticultural mineral oil (HMO) 12 to 16 months before examination of plant tissues by CSSI, and were still showing symptoms of chronic phytotoxicity largely manifested as reduced yield. The oil deposits were detected in stems of sprayed flushes and unsprayed flushes produced 4 to 5 months after the last spray was applied, suggesting a potential movement of the oil via phloem and a correlation of the persistence of oil deposit in plants and the phytotoxicity. The results demonstrate that MRI is an effective method to probe the uptake and localization of PDSOs and other xenobiotics in vivo in plants noninvasively and nondestructively.

Acibenzolar-S-methyl and methyl jasmonate treatments of glasshouse-grown freesias suppress post-harvest petal specking caused by Botrytis cinerea

Compounds that activate host plant defence responses potentially offer socio-environmentally sound alternative methods for disease control. In a series of glasshouse trials over 2 years, pre-harvest sprays with acibenzolar-S-methyl (ASM) and methyl jasmonate (MeJA) were tested for suppression of post-harvest infection of cut Freesia hybrida L. flowers by Botrytis cinerea. For the ASM treatments, variability in reducing the incidence of B. cinerea disease was observed between years freesia varieties, incubation temperatures and ASM concentrations. In the first year, the greatest reductions in lesion numbers on ASM-treated var. 'Cote d'Azur' were recorded using 2.86 mM ASM. For three different post-harvest temperature regimes, the relative reductions in lesion numbers, compared to untreated controls, were 45% at 5 degrees C, 40% at 12 degrees C and 30% at 20 degrees C, respectively. In the second year, lesion numbers were most reduced using 1.43 mM ASM to treat freesia var. 'Dukaat' flowers. Here, the relative reductions were to 44% at 5 degrees C, 26% at 12 degrees C and 51% at 20 degrees C. MeJA treatments were, in general, more consistently effective than ASM treatments in reducing lesion numbers and lesion diameters on cut freesia flowers. MeJA-treated (0.2 mM) freesia flowers (var. 'Dukaat') incubated at 20 degrees C showed relative reductions of 62%, and 45% for lesion number and lesion diameter, respectively. The differing efficacy between ASM and MeJA treatments could be attributed to their differential abilities to induce the salicylic acid (SA)-mediated vs. the jasmonic acid (JA)-mediated host defence pathways, respectively.

Drying of portland cement raw material slurries:predicting the performance of a counter-current spray drier

An extensive review of literature has been carried out concerning the drying of single drops, sprays of droplets and the prediction of spray drier performances. The experimental investigation has been divided into two broad parts mainly: (1) Single Drop Experiments, and (2) Spray Drying and Residence Time Distribution Experiments. The thermal conductivity of slurry cakes from five different sources have been experimentally determined using a modified Lee's Disc Apparatus and the data collected was correlated by the polynominal... Good agreement was observed between the experimental thermal conductivity values and the predicted ones. The fit gave a variance ... for the various samples experimented on. A mathematical model for estimating crust mass transfer coefficient at high drying temperatures was derived.

The drying of small drops of particulate slurries

The literature on the evaporation of drops of pure liquids, drops containing solids and droplet sprays has been critically reviewed. An experimental study was undertaken on the drying of suspended drops of pure water and aqueous sodium sulphate decahydrate with concentrations varying from 5 to 54. 1 wt. %. Individual drops were suspended from a glass filament balance in a 26 mm I.D. vertical wind tunnel, designed and constructed to supply hot de-humidified air, to simulate conditions encountered in commercial spray driers. A novel thin film thermocouple was developed to facilitate the simultaneous measurement of drop weight and core temperature. The heat conduction through the thermocouple was reduced because of its unique design; using essentially a single 50μ diameter nickel wire. For pure water drops, the Nusselt number was found to be a function of the Reynolds, Prandtl and Transfer numbers for a temperature range between 19 to 79°C.                  Nu = 2 + 0.19 (1/B)0.24 Re0.5 Pr0.33 Two distinct periods were observed during the drying of aqueous sodium sulphate decahydrate. The first period was characterised by the evaporation from a free liquid surface, whilst drying in the second period was controlled by the crust resistance. Fracturing of the crust occurred randomly but was more frequent at higher concentrations and temperatures. A model was proposed for the drying of slurry drops, based on a receding evaporation interface. The model was solved numerically for the variation of core temperature, drop weight and crust thickness as a function of time. Experimental results were in excellent agreement with the model predictions although at higher temperatures modifications to the model had to be made to accommodate the unusual behaviour of sodium sulphate slurries, i.e. the formation of hydrates.

The influence of calcium and magnesium on the growth of the lichens Parmelia saxatilis and Xanthoria parietina on slate substrates

In South Gwynedd, Wales, U.K., the calcicole lichen Xanthoria parietina occurs not only on alkaline substrates at inland sites but also on siliceous rock at coastal martimie sites while the calcifuge species Parmelia saxatilis occurs only at inland sites and on slate rocks. Samples of maritime and inland slate did not differ significantly in their calcium or magnesium content. Thalli of X. parietina on pieces of slate did not survive when transplanted from maritime rocks to a site inland. Thalli of maritime X. parietina and P. saxatilis on slate were then transplanted to a site inland and were treated at intervals during 1 year either with calcium carbonate applied as a thick paste or a 0.25 mM solution of calcium chloride. Treatment of X. parietina with calcium carbonate enabled the thalli to survive and grow. However, addition of calcium carbonate to P. saxatilis resulted in low growth rates and fragmentation of the centres of the thalli. The calcium chloride solution had no statistically significant effects on the growth of either species. In addition, thalli of both species were treated with calcium or magnesium carbonates or wetted with an alkaline buffer at intervals over 12-14 months. Thalli of X. parietina survived and grew rapidly when treated with either carbonate but the growth of the buffer-treated thalli gradually declined over the experimental period. Thalli of P. saxatilis fragmented and disappeared after 8-10 months after treatment with either carbonate but normal growth occurred in the buffer treatment. Xanthoria parietina may occur on siliceous maritime rocks at the site because of the presence of calcium or magnesium in sea spray combined with the spray’s alkaline pH. By contrast, P. saxatilis may be confined to siliceous rocks inland because the thalli grow poorly in the presence of calcium and magnesium.

The atomisation of detergent slurries

A study was made to determine the conditions under which the optimum droplet size distribution (ie., narrowest size range with a minimum of fines and over-sized agglomerates), is generated in sprays from centrifugal pressure nozzles. A range of non-Newtonian detergent slurries were tested but the results are of wider application and parallel work was undertaken with water, ionic solutions and chalk slurries. Six centrifugal pressure nozzles were used and the drop-size distributions correlated as a function of fluid properties, pressure, fiowrate, feed temperature, and nozzle characteristics. Measurements were made using a Malvern Particle Size Anayser slung across a specially-designed transparent tower section of approximately 1.2m diameter in order to reduce obscuration caused by the spray and improve existing droplet sizing techniques. The results obtained were based upon the Rosin-Rammler distribution model and the Size Analyser provided a direct print-out of size distribution and the parameters characterising it. A Spraying System nozzle, AAASSTC8-8, produced the optimum spray distribution with the detergent slurry at a temperature of 60°C whilst operating at 1200 psi. With other fluids the Delevan 2.2SJ nozzle produced the optimum spray distribution operating at 1200 psi but with the Spraying Systems nozzles there was no clear-cut optimum set of conditions, ie. the nozzle and pressure varied depending upon the fluid being sprayed. The mechanisms of liquid sheet break-up and droplet dispersion were investigated in specially-constructed, scaled-up, transparent nozzles. A mathematical model of centrifugal pressure nozzle atomisation was developed based upon fundamental operating parameters rather than resorting to empirical correlations. This enabled theoretical predictions to be made over a wide range of operating conditions and nozzle types. The model predictions for volumetric fiowrate, liquid sheet length and air core diameter showed good agreement with the experimentally determined results. However, the model predicted smaller droplet sizes than were produced experimentally due to inaccuracies identified in the initial assumptions.

Mechanisms of drying of skin forming materials

The literature relating to evaporation from single droplets of pure liquids, and to the drying of droplets containing solids and of droplet sprays has been reviewed. The heat and mass transfer rates for a single droplet suspended from a nozzle were studied within a 42mm I.D. horizontal wind tunnel designed to supply hot dry air, to simulate conditions encountered in a practical spray dryer. A novel rotating glass nozzle was developed to facilitate direct measurements of droplet weight and core temperature. This design minimised heat conduction through the nozzle. Revised correlations were obtained for heat and mass transfer coefficients, for evaporation from pure water droplets suspended from a rotating nozzle. Nu = 2.0 + 0.27 (l/B)°-18Re°-5Pr°-83 Sh = 2.0 + 0.575 ((T0-T.)/Tomfc) -o.o4Reo.5 ^0.33 Experimental drying studies were carried out on single droplets of different types of skin-forming materials, namely, custard, gelatin, skim milk and fructose at air temperatures ranging from 19°C to 198°C. Dried crusts were recovered and examined by Scanning Electron Microscopy. Skin-forming materials were classified into three types according to the mechanisms of skin formation. In the first type (typified by droplets of custard and starch) skin formed due to gelatinisation at high temperatures. Increasing the drying temperature resulted in increased crust resistance to mass transfer due to increased granule swelling and the crust resistance was completely transferred to a skin resistance at drying temperatures > 150°C. In the second type e.g. gelatin droplets the skin formed immediately drying had taken place at any drying temperature. At drying temperature > 60° C a more resistant skin was formed. In the third type (typified by droplets of skim milk and fructose) the skin appeared on the droplet surface at a certain stage of the drying process under any drying conditions. As the drying temperature was increased the resistance of the skin to mass transfer increased. The drying rate history of any material depended upon the nature of the skin formed which, in turn, depended upon the drying conditions. A mathematical model was proposed for the drying of the first type of skin-forming material. This was based on the assumption that, once all the granules gelatinised at the gelatinisation temperature, a skin appeared instantaneously on the droplet surface. The experimentally-observed times at which the skin appeared on the droplets surfaces were in excellent agreement with those predicted from the model. The work should assist in understanding the fundamentals of paniculate drying processes, particularly when skin-formation occurs and may be a crucial factor in volatiles retention.