Electrochemical characteristics of glucose oxidase adsorbed at carbon nanotubes modified electrode with ionic liquid as binder

Multiwall carbon nanotubes (CNTs)-modified electrode has been prepared by using ionic liquid (IL) as the binder. The as-prepared CNTs-IL composite modified electrode has good biocompatibility and is a suitable matrix to immobilize biomolecules. Glucose oxidase (GOx), containing flavin adenine dinucleotide as active site, stably adsorbed on modified electrode surface has resulted in the direct electron transfer. The electron transfer rate of 9.08 s(-1) obtained is much higher than that of GOx adsorbed on the CNTs papers (1.7 s(-1)), and the process is more reversible with small redox peak separation of 23 mV This may be due to the synergetic promotion of CNTs and IL to electron transfer of the protein, especially the IL as the binder, showing better electrochemical properties than that of chitosan and Nafion. Furthermore, GOx adsorbed at the modified electrode exhibits good stability and keeps good electrocatalytic activity to glucose with broad linear range up to 20 mM. Besides, the simple preparation procedure and easy renewability make the system a basis to investigate the electron transfer kinetics and biocatalytic performance of GOx and provide a promising platform for the development of biosensors.

Field-amplified sample stacking capillary electrophoresis with electrochemiluminescence applied to the determination of illicit drugs on banknotes

Capillary electrophoresis (CE) with Ru(bpy)(3)(2+) electrochemiluminescence. (ECL) detection system was established to the determination of contamination of banknotes with controlled drugs and a high efficiency on-column field-amplified sample stacking (FASS) technique was also optimized to increase the ECL intensity. The method was illustrated using heroin and cocaine, which are two typical and popular illicit drugs. Highest sample stacking was obtained when 0.01 mM acetic acid was chosen for sample dissolution with electrokinetical injection for 6 s at 17 kV. Under the optimized conditions: ECL detection at 1.2 V, separation voltage 10.0 kV, 20 mM phosphate-acetate (pH 7.2) as running buffer, 5 mM Ru(bpy)(3)(2+) with 50 mM phosphate-acetate (pH 7.2) in the detection cell, the standard curves were linear in the range of 7.50 x 10(-8) to 1.00 x 10(-5) M for heroin and 2.50 x 10(-7) to 1.00 x 10(-4) M for cocaine and detection limits of 50 nM for heroin and 60 nM for cocaine were achieved (S/N = 3), respectively. Relative standard derivations of the ECL intensity and the migration time were 3.50 and 0.51% for heroin and 4.44 and 0.12% for cocaine, respectively.The developed method was successfully applied to the determination of heroin and cocaine on illicit drug contaminated banknotes without any damage of the paper currency.

Determination of biogenic amines by capillary electrophoresis with pulsed amperometric detection

The biogenic amines, putrescine, cadaverine, spermidine and spermine were separated and quantified by capillary electrophoresis with pulsed amperometric detection. Detection potential of the pulsed amperometric detection was optimized as 0.6 V Optimal separation of the biogenic amines was achieved using a separation buffer of 30 mM citrate at pH 3.5, while keeping the buffer in the detection cell as 20 mM NaOH. Using these conditions, the four biogenic amines were baseline separated. Extrapolated limits of detection for putrescine, cadaverime, spermidine and spermine were 400, 200, 100 and 400 nM for the standard mixture (polyamines dissolved in running buffer), respectively. These are lower than ultraviolet detection and comparable or even lower than laser-induced fluorescence detection results as reported in the literature. The number of theoretical plates was maintained at the 105 level, which is absolutely higher than any reported method. When applying capillary electrophoresis-pulsed amperometric detection to milk analysis, only spermidine was found in amounts varying between 0.1 and 0.5 mg/kg.

Direct electron communication between glucose oxidase and carbon electrode covered with polypyrrole

Glucose oxidase can be effectively adsorbed onto the polypyrrole(PPy) thin film electrochemically formed on an anodized galssy carbon electrode(GCEa). Direct electron communication between the redox of GOD and the modified electrode was successfully achieved, which was detected using cyclic voltammetry. GOD entrapped in PPy film still remained its biological activity and could catalyze the oxidation of glucose. As a third generation biosensor, GOD-PPy/GCEa responded linearly up to 20 mM glucose with a wider linear concentration range.

刺参生态增养殖原理与关键技术

针对目前刺参养殖业中面临的问题，系统研究了刺参的基础生物学、组织学，生理生态学和呼吸生理学特征，评估了刺参的养殖容量，优化了养殖模式，以嵊泗列岛为例，系统研究了刺参南移后的存活和生长等特征。研究结果如下： 1．刺参体腔液细胞存在于刺参的体腔中，体腔液细胞行使免疫防御、营养贮存和运输的功能。根据形态和功能上的特征可分为小淋巴细胞、桑葚细胞、吞噬细胞、结晶细胞、纺缍细胞和振动细胞。体腔液细胞的形态和结构与其功能密切相关。不同特征的细胞可能是同一类型体腔液细胞的不同发育阶段。体腔液细胞平均密度为(3.79 ± 0.65)×106 cells /ml-1. 刺参的血淋巴细胞可分为小淋巴细胞、桑葚细胞、吞噬细胞和结晶细胞。刺参体腔液细胞可分为小淋巴细胞、桑葚细胞、吞噬细胞、结晶细胞、纺锤细胞和振动细胞。刺参吞噬细胞的吞噬率与温度呈正相关，并呈现出强烈的凝集现象。 2．刺参的血管、呼吸树、肌细胞和体腔内皮细胞的超微结构复杂，与其功能密切相关。夏眠前后刺参消化道明显萎缩，上皮细胞重吸收现象显著，结果显示组织结构的改变与外界环境相适应。刺参夏眠时体腔液pH和PO2升高，PCO2降低。连续取样对刺参体腔液血气指标没有显著性影响。刺参体腔液的%Extrw和%EwO2与体重呈负相关。 3．刺参的扰动导致底质中有机物含量、TOC、TN、叶绿素和细菌含量降低，刺参粪便中有机物含量高于周围底质，刺参对摄食底质具有选择性。刺参的扰动能增强底质的稳定性，与对照组相比，硫化物含量和氧化还原电位降低。 4．根据水体理化指标变化和自然沉积有机物的供饵力，结合不同温度下大规格刺参对自然生物沉积物的吸收率，计算刺参的养殖容量。浅海典型水域刺参的养殖容量约为109.40 g y-1m-2。 5．前三岛近岛水域底质有机物含量高于离岸深水水域，且粒度较离岸水域细，大多在0.20 mm以下。刺参的放流浓度和参礁的放置深度应选择在5-12m。刺参的放养规格宜为经人工越冬后体长在8-10厘米的参苗，体重超过30克。 6．研究了三种规格的刺参笼养殖存活和生长特征，初步建立了刺参筏式笼养技术。投喂海带，存活率达到83%以上。密度对刺参的生长有着显著的影响，随着实验的进行，放养密度增加，刺参的体重减小。4月后，随着温度的升高和海况的改变，刺参的生长率下降。刺参南移养殖模式的适宜放养密度应控制在3-5头，放养规格应在40g以上，经过5-6个月的生长能达到100g左右。

Otimização de protocolo para análise de AFLP em Lolium multiflorum Lam.

ESTABELECIMENTO DE METODOLOGIA PARA ANÁLISE MOLECULAR DE AZEVÉM ANUAL COM MARCADORES AFLP. O uso de marcadores moleculares no manejo de bancos de germoplasma tem sido cada vez mais expressivo. Entre os diferentes tipos de marcadores moleculares, o AFLP, Amplified Fragment Length Polymorphism, apresenta algumas vantagens para uso na caracterização de recursos genéticos, como a detecção de grande número de bandas informativas por reação, com ampla cobertura do genoma e considerável reprodutibilidade, além de não necessitar de dados de seqüenciamento prévio da espécie para a construção de primers. Embora a análise de AFLP seja freqüentemente utilizada em estudos de variabilidade genética em diferentes espécies, o uso da técnica em Lolium multiflorum ainda é incipiente. Com a finalidade de estabelecer um protocolo para o emprego da técnica de AFLP em azevém anual foi conduzido este trabalho. Foram avaliadas as concentrações iniciais de DNA genômico de 100 e 250 ng, a digestão do DNA com 1,25 e 1U das enzimas EcoRI e MSe, e os respectivos tempos de reação de digestão: 3, 6 e 12 horas. Também foram avaliadas quatro concentrações da solução resultante da ligação dos adaptadores: solução sem diluição; diluída 1:5; 1:10 e 1:20 e duas diluições após a reação de pré-amplificação, de 1:25 e 1:50. Como resultado, foi estabelecido como melhor protocolo, no qual foi obtido um maior número e qualidade de fragmentos, o que utiliza a concentração inicial de DNA genômico de 100 ng, num volume final de reação de digestão 10 ?l, com 1U de cada enzima EcoRI e MseI e tempo de reação de 12h a 37°C, com reação de ligação de adaptadores realizada com a adição da solução de ligação de adaptadores, do Kit AFLP? Analysis System I (InvitroGen Life Technologies, Carlsbad, Calif., USA), e 0,4 U de T4 DNA ligase em um volume final de 10?l, por 2h a 20°C. Após a ligação de adaptadores a diluição deverá ser de 1:5. A reação de pré-amplificação deverá ocorrer a partir de 1?l desta última solução (diluída 1:5), 1,0 X PCR buffer com Mg Plus [Tris-HCl (pH 7.6) 20 mM, MgCl2 1,5 mM, KCl 50 mM], BSA 0,003% e 1 U de Taq DNA polimerase, completando com mix de pré-amplificação do Kit AFLP? Analysis System I até alcançar o volume final de 11?l. O produto da pré-amplificação deverá ser diluído 1:25 antes de ser procedida à amplificação seletiva, a qual deve ser realizada utilizando 2,5 ?l da solução de DNA pré-amplificado (diluído 1:25), 1 X PCR buffer com Mg Plus [Tris-HCl (pH 8,4) 20 mM, MgCl2 1,5 mM, KCl 50 mM], BSA (0,003%), 1 U de Taq DNA polimerase, 10 ng de primer EcoRI, 1,5 ng de primer MseI, 0,4mM de DNTps e H2O MilliQ? até completar o volume final de 10?l. Com este protocolo uma única combinação de primers permitiu identificar 58 bandas polimórficas na análise de duas populações de azevém anual.

Simultaneous and ultrarapid determination of reactive oxygen species and reduced glutathione in apoptotic leukemia cells by microchip electrophoresis

A microchip electrophoresis method coupled with laser-induced fluorescence (LIF) detection was established for simultaneous determination of two kinds of intracellular signaling molecules (reactive oxygen species, ROS, and reduced glutathione, GSH) related to apoptosis and oxidative stress. As the probe dihydrorhodamine-123 (DHR123) can be converted intracellularly by ROS to the fluorescent rhodamine-123 (Rh123), and the probe naphthalene-2,3-dicarboxaldehyde (NDA) can react quickly with GSH to produce a fluorescent adduct, rapid determination of Rh-123 and GSH was achieved on a glass microchip within 27 s using a 20 mm borate buffer (pH 9.2). The established method was tested to measure the intracellular ROS and GSH levels in acute promyelocytic leukemia (APL)-derived NB4 cells. An elevation of intracellular ROS and depletion of GSH were observed in apoptotic N134 cells induced by arsenic trioxide (AS(2)O(3)) at low concentration (1-2 mu m). Buthionine sulfoximine (BSO), in combination with AS(2)O(3) enhanced the decrease of reduced GSH to a great extent. The combined treatment of AS(2)O(3) and hydrogen peroxide (H2O2) led to an inverse relationship between the concentrations of ROS and GSH obtained, showing the proposed method can readily evaluate the generation of ROS, which occurs simultaneously with the consumption of the inherent antioxidant.

On-board Robotic Multi-pinhole SPECT System for Region-of-interest (ROI) Imaging

On-board image guidance, such as cone-beam CT (CBCT) and kV/MV 2D imaging, is essential in many radiation therapy procedures, such as intensity modulated radiotherapy (IMRT) and stereotactic body radiation therapy (SBRT). These imaging techniques provide predominantly anatomical information for treatment planning and target localization. Recently, studies have shown that treatment planning based on functional and molecular information about the tumor and surrounding tissue could potentially improve the effectiveness of radiation therapy. However, current on-board imaging systems are limited in their functional and molecular imaging capability. Single Photon Emission Computed Tomography (SPECT) is a candidate to achieve on-board functional and molecular imaging. Traditional SPECT systems typically take 20 minutes or more for a scan, which is too long for on-board imaging. A robotic multi-pinhole SPECT system was proposed in this dissertation to provide shorter imaging time by using a robotic arm to maneuver the multi-pinhole SPECT system around the patient in position for radiation therapy.

A 49-pinhole collimated SPECT detector and its shielding were designed and simulated in this work using the computer-aided design (CAD) software. The trajectories of robotic arm about the patient, treatment table and gantry in the radiation therapy room and several detector assemblies such as parallel holes, single pinhole and 49 pinholes collimated detector were investigated. The rail mounted system was designed to enable a full range of detector positions and orientations to various crucial treatment sites including head and torso, while avoiding collision with linear accelerator (LINAC), patient table and patient.

An alignment method was developed in this work to calibrate the on-board robotic SPECT to the LINAC coordinate frame and to the coordinate frames of other on-board imaging systems such as CBCT. This alignment method utilizes line sources and one pinhole projection of these line sources. The model consists of multiple alignment parameters which maps line sources in 3-dimensional (3D) space to their 2-dimensional (2D) projections on the SPECT detector. Computer-simulation studies and experimental evaluations were performed as a function of number of line sources, Radon transform accuracy, finite line-source width, intrinsic camera resolution, Poisson noise and acquisition geometry. In computer-simulation studies, when there was no error in determining angles (α) and offsets (ρ) of the measured projections, the six alignment parameters (3 translational and 3 rotational) were estimated perfectly using three line sources. When angles (α) and offsets (ρ) were provided by Radon transform, the estimation accuracy was reduced. The estimation error was associated with rounding errors of Radon transform, finite line-source width, Poisson noise, number of line sources, intrinsic camera resolution and detector acquisition geometry. The estimation accuracy was significantly improved by using 4 line sources rather than 3 and also by using thinner line-source projections (obtained by better intrinsic detector resolution). With 5 line sources, median errors were 0.2 mm for the detector translations, 0.7 mm for the detector radius of rotation, and less than 0.5° for detector rotation, tilt and twist. In experimental evaluations, average errors relative to a different, independent registration technique were about 1.8 mm for detector translations, 1.1 mm for the detector radius of rotation (ROR), 0.5° and 0.4° for detector rotation and tilt, respectively, and 1.2° for detector twist.

Simulation studies were performed to investigate the improvement of imaging sensitivity and accuracy of hot sphere localization for breast imaging of patients in prone position. A 3D XCAT phantom was simulated in the prone position with nine hot spheres of 10 mm diameter added in the left breast. A no-treatment-table case and two commercial prone breast boards, 7 and 24 cm thick, were simulated. Different pinhole focal lengths were assessed for root-mean-square-error (RMSE). The pinhole focal lengths resulting in the lowest RMSE values were 12 cm, 18 cm and 21 cm for no table, thin board, and thick board, respectively. In both no table and thin board cases, all 9 hot spheres were easily visualized above background with 4-minute scans utilizing the 49-pinhole SPECT system while seven of nine hot spheres were visible with the thick board. In comparison with parallel-hole system, our 49-pinhole system shows reduction in noise and bias under these simulation cases. These results correspond to smaller radii of rotation for no-table case and thinner prone board. Similarly, localization accuracy with the 49-pinhole system was significantly better than with the parallel-hole system for both the thin and thick prone boards. Median localization errors for the 49-pinhole system with the thin board were less than 3 mm for 5 of 9 hot spheres, and less than 6 mm for the other 4 hot spheres. Median localization errors of 49-pinhole system with the thick board were less than 4 mm for 5 of 9 hot spheres, and less than 8 mm for the other 4 hot spheres.

Besides prone breast imaging, respiratory-gated region-of-interest (ROI) imaging of lung tumor was also investigated. A simulation study was conducted on the potential of multi-pinhole, region-of-interest (ROI) SPECT to alleviate noise effects associated with respiratory-gated SPECT imaging of the thorax. Two 4D XCAT digital phantoms were constructed, with either a 10 mm or 20 mm diameter tumor added in the right lung. The maximum diaphragm motion was 2 cm (for 10 mm tumor) or 4 cm (for 20 mm tumor) in superior-inferior direction and 1.2 cm in anterior-posterior direction. Projections were simulated with a 4-minute acquisition time (40 seconds per each of 6 gates) using either the ROI SPECT system (49-pinhole) or reference single and dual conventional broad cross-section, parallel-hole collimated SPECT. The SPECT images were reconstructed using OSEM with up to 6 iterations. Images were evaluated as a function of gate by profiles, noise versus bias curves, and a numerical observer performing a forced-choice localization task. Even for the 20 mm tumor, the 49-pinhole imaging ROI was found sufficient to encompass fully usual clinical ranges of diaphragm motion. Averaged over the 6 gates, noise at iteration 6 of 49-pinhole ROI imaging (10.9 µCi/ml) was approximately comparable to noise at iteration 2 of the two dual and single parallel-hole, broad cross-section systems (12.4 µCi/ml and 13.8 µCi/ml, respectively). Corresponding biases were much lower for the 49-pinhole ROI system (3.8 µCi/ml), versus 6.2 µCi/ml and 6.5 µCi/ml for the dual and single parallel-hole systems, respectively. Median localization errors averaged over 6 gates, for the 10 mm and 20 mm tumors respectively, were 1.6 mm and 0.5 mm using the ROI imaging system and 6.6 mm and 2.3 mm using the dual parallel-hole, broad cross-section system. The results demonstrate substantially improved imaging via ROI methods. One important application may be gated imaging of patients in position for radiation therapy.

A robotic SPECT imaging system was constructed utilizing a gamma camera detector (Digirad 2020tc) and a robot (KUKA KR150-L110 robot). An imaging study was performed with a phantom (PET CT PhantomTM), which includes 5 spheres of 10, 13, 17, 22 and 28 mm in diameter. The phantom was placed on a flat-top couch. SPECT projections were acquired with a parallel-hole collimator and a single-pinhole collimator both without background in the phantom, and with background at 1/10th the sphere activity concentration. The imaging trajectories of parallel-hole and pinhole collimated detectors spanned 180 degrees and 228 degrees respectively. The pinhole detector viewed a 14.7 cm-diameter common volume which encompassed the 28 mm and 22 mm spheres. The common volume for parallel-hole was a 20.8-cm-diameter cylinder which encompassed all five spheres in the phantom. The maneuverability of the robotic system was tested by navigating the detector to trace the flat-top table while avoiding collision with the table and maintaining the closest possible proximity to the common volume. For image reconstruction, detector trajectories were described by radius-of-rotation and detector rotation angle θ. These reconstruction parameters were obtained from the robot base and tool coordinates. The robotic SPECT system was able to maneuver the parallel-hole and pinhole collimated SPECT detectors in close proximity to the phantom, minimizing impact of the flat-top couch on detector to center-of-rotation (COR) distance. In no background case, all five spheres were visible in the reconstructed parallel-hole and pinhole images. In with background case, three spheres of 17, 22 and 28 mm diameter were readily observed with the parallel-hole imaging, and the targeted spheres (22 and 28 mm diameter) were readily observed in the pinhole ROI imaging.

In conclusion, the proposed on-board robotic SPECT can be aligned to LINAC/CBCT with a single pinhole projection of the line-source phantom. Alignment parameters can be estimated using one pinhole projection of line sources. This alignment method may be important for multi-pinhole SPECT, where relative pinhole alignment may vary during rotation. For single pinhole and multi-pinhole SPECT imaging onboard radiation therapy machines, the method could provide alignment of SPECT coordinates with those of CBCT and the LINAC. In simulation studies of prone breast imaging and respiratory-gated lung imaging, the 49-pinhole detector showed better tumor contrast recovery and localization in a 4-minute scan compared to parallel-hole detector. On-board SPECT could be achieved by a robot maneuvering a SPECT detector about patients in position for radiation therapy on a flat-top couch. The robot inherent coordinate frames could be an effective means to estimate detector pose for use in SPECT image reconstruction.

Fertilización nitrogenada en cultivos de invierno en base a nitrógeno disponible en suelo y condiciones climáticas pre - siembra (temperatura y precipitaciones)

El correcto manejo del N resulta muy importante en los cultivos de trigo y cebada. Esto se explica por la importancia que tiene este nutriente en el crecimiento de los cultivos, por la movilidad que presenta en el suelo, por la diversidad de factores (bióticos como abióticos) que lo afectan y por el peso económico que tiene el correcto uso de este nutriente. Por lo expresado hemos estudiado con datos de 164 chacras para diferentes años (1999-2000-2001-2002) el efecto de la Temperatura, Precipitación, Fecha de Siembra y Antecesores sobre la disponibilidad de N-NO3 - a la siembra de cultivos de invierno. Bajas precipitaciones durante los 40 días previos a la siembra, alta temperatura del período y fecha de siembra temprana se asociaron a los mayores niveles de N-NO3 - disponibles en el suelo a la siembra. En función de esta información, cuando las lluvias durante los 40 días previos a la siembra son menos de 20 mm y se logran siembras tempranas, es esperable que no haya déficit inicial de N para los cultivos. En siembras inmediatas a períodos de precipitaciones excesivas (135 mm) es esperable muy baja disponibilidad de N-NO3 -, por lo que, si no se dispone del valor de análisis, sería necesario corregir con la dosis máxima propuesta. Para las situaciones intermedias, la única herramienta válida sería el análisis de suelo correspondiente

The influence of alkali metal chlorides on the loss of water from glass-ionomer dental cements

The water loss behaviour of a clinical glass-ionomer dental cement has been studied with and without the addition of alkali metal chlorides. Dehydrating conditions were provided by placing specimens in a desiccator over concentrated sulphuric acid. Cements were prepared using either pure water or an aqueous solution of metal chloride (LiCl, NaCl, KCl) at 1.0 mol/dm(3). In addition, NaCl at 0.5 mol/dm(3) was also used to fabricate cements. Disc-shaped specimens of size 6 mm diameter x 2 mm thickness were made, six performulation, and cured at 37 degrees C for 1 hour They were then exposed to desiccating conditions, and the mass measured at regular intervals. All formulations were found to lose water in a diffusion process that equilibrated after approximately 3 weeks. Diffusion coefficients ranged from 2.27 (0.13) x 10(9) with no additive to 1.85 (0.07) x 10(9) m(2)/s with 1.0 mol/dm(3) KCl. For the salts, diffusion coefficients decreased in the order LiCl > NaCl > KCl. There was no statistically significant difference between the diffusion coefficients for 1.0 and 0.5 mol/dm(3) NaCl. For all salts at 1.0 mol/dm(3) and also additive-free cements, equilibrium losses were, with statistical limits, the same, ranging from 6.23 to 6.34%. On the other hand, 0.5 mol/dm(3) NaCl lost significantly more water 7.05%.

Effects Of Temperature And Salinity On Oxygen-Consumption And Nitrogen-Excretion In Thais (Nucella) Lapillus (L)

The 2-wk TLm of stepwise-acclimated Thais lapillus (L.) (>20 mm long) was 14.2–16.2%. salinity (S) at 5, 10, 15, and 20°C. The same TLm occurred at 10 °C after direct transfer of snails to the final salinity but stepwise-acclimated small snails (<20 mm) tolerated a significantly lower salinity (12.7%. S). Oxygen consumption rates () fit the allometric equation . Salinity and temperature had a significant effect on , which was highest at 30%. S and depressed at 17.5%. S and at 5°C. Ammonia excretion rates fit the allometric equation . Both salinity and temperature affected . Ammonia excretion was significantly lower at 17.5 %. S than at higher salinities at 10, 15, and 20°C, but did not vary as a function of salinity at 5°C. Primary amines were lost from snails under all conditions without any obvious relationship with temperature or salinity. Primary-amine loss, expressed as a percentage of , was significantly higher at 17.5 %. S than at higher salinities. Oxygen : nitrogen ratios ranged from 4.2–15.6, indicating protein was the primary metabolic substrate, and were highest at 15 °C and lowest at 5 °C. Snails withstood 89 days starvation without mortality at 10°C. Oxygen consumption of snails declined by 28% during starvation due to a 37% decline in dry weight; consequently, weight-specific respiration rate increased by 17%. The intercept (a) for the allometric equations did not change during starvation. Ammonia excretion increased during starvation, and primary-amine loss increased until Day 21, then declined. Oxygen: nitrogen ratios declined from 14 to 8, indicating an increased catabolism of protein during starvation.

Determination Of Fine-Scale Vertical-Distribution Of Microbes And Meiofauna In An Intertidal Sediment

A simple sampling device is described which produces thin (1 mm) sections of sediment cores. The sampler has been tested on fine sand of an intertidal sandflat and used to study the vertical distribution, over part of a tidal cycle in August, 1981, of migrating algae in the surface 20 mm of sand. Two species of Diplonies and one of Navicula showed marked changes in vertical distribution as the sandflat was flooded, but the distribution of bacteria in the sime samples did not show any change with tidal state. Spatial separation of different species of harpacticoid oppepods within the surface 20 mm of sand has also been demonstrated using this sampler, and the results suggest that different species may occupy particular fine-scale spatial niches within the sand column. The depth separation of nematode species was less well defined, except for two species with apparently the same feeding mode which were isolated from one another vertically.

Responses Of Mytilus-Edulis L To Low Oxygen-Tension - Acclimation Of Rate Of Oxygen-Consumption

1. Mytilus edulis acclimated its rates of oxygen consumption when maintained at reduced oxygen tensions for periods in excess of five days. 2. Acclimation was complete down to approximately 55 mm Hg PO2 at slightly lower oxygen tensions (51, 49 and 43 mm Hg) acclimation was complete in one experiment and partial in two others. 3. The capacity to acclimate oxygen consumption was not affected by a reduction in ration nor by an increase in temperature (10 to 22 °C). 4. Mussels that were acclimated to reduced oxygen tension (40–80 mm Hg), and then exposed to P O 2 of less than 20 mm Hg for two or five hours, had depressed rates of oxygen uptake when subsequently “recovered” to 40–80 mm Hg. 5. These results are discussed in the context of biochemical studies of anaerobic metabolism in mussels from the same experiments.

Sedimentation of acantharian cysts in the Iceland Basin: Strontium as a ballast for deep ocean particle flux, and implications for acantharian reproductive strategies

Acantharian cysts were discovered in sediment trap samples from spring 2007 at 2000 m in the Iceland Basin. Although these single-celled organisms contribute to particulate organic matter flux in the upper mesopelagic, their contribution to bathypelagic particle flux has previously been found negligible. Four time-series sediment traps were deployed and all collected acantharian cysts, which are reproductive structures. Across all traps, cysts contributed on average 3-22%, and 4―24% of particulate organic carbon and nitrogen (POC and PON) flux, respectively, during three separate collection intervals (the maximum contribution in any one trap was 48% for POC and 59% for PON). Strontium (Sr) flux during these 6 weeks reached 3 mg m―2 d―1. The acantharian celestite (SrSO4) skeleton clearly does not always dissolve in the mesopelagic as often thought, and their cysts can contribute significantly to particle flux at bathypelagic depths during specific flux events. Their large size (∼ I mm) and mineral ballast result in a sinking rate of ∼ 500 m d―1; hence, they reach the bathypelagic before dissolving. Our findings are consistent with a vertical profile of salinity-normalized Sr concentration in the Iceland Basin, which shows a maximum at 1700 m. Profiles of salinity-normalized Sr concentration in the subarctic Pacific reach maxima at ≤ 1500 m, suggesting that Acantharia might contribute to the bathypelagic particle flux there as well. We hypothesize that Acantharia at high latitudes use rapid, deep sedimentation of reproductive cysts during phytoplankton blooms so that juveniles can exploit the large quantity of organic matter that sinks rapidly to the deep sea following a bloom.

Allogenic Peripheral Blood Derived Mesenchymal Stem Cells (MSCs) Enhance Bone Regeneration in Rabbit Ulna Critical-Sized Bone Defect Model

Mesenchymal stem cells (MSCs) were demonstrated to exist within peripheral blood (PB) of several mammalian species including human, guinea pig, mice, rat, and rabbit. Whether or not the PB derived MSCs (PBMSCs) could enhance the regeneration of large bone defects have not been reported. In this study, rabbit MSCs were obtained from mononuclear cells (MNCs) cultures of both the PB and bone marrow (BM) origin. The number of PBMSCs was relatively lower, with the colony forming efficiency (CFE) ranging from 1.2-13 per million MNCs. Under specific inductive conditions, PBMSCs differentiated into osteoblasts, chondrocytes, and adipocytes, showing multi- differentiation ability similar to BMMSCs. Bilateral 20 mm critical-sized bone defects were created in the ulnae of twelve 6-month old New Zealand white rabbits. The defects were treated with allogenic PBMSCs/Skelite (porous calcium phosphate resorbable substitute), BMMSCs/Skelite, PBMNCs/Skelite, Skelite alone and left empty for 12 weeks. Bone regeneration was evaluated by serial radiography, peripheral quantitative computed tomography (pQCT), and histological examinations. The x-ray scores and the pQCT total bone mineral density in the PBMSCs/Skelite and BMMSCs/Skelite treated groups were significantly greater than those of the PBMNCs/Skelite and Skelite alone groups (p