Bone turnover markers for early detection of fracture healing disturbances: A review of the scientific literature

Imaging techniques are the standard method for assessment of fracture healing processes. However, these methods are perhaps not entirely reliable for early detection of complications, the most frequent of these being delayed union and non-union. A prompt diagnosis of such disorders could prevent prolonged patient distress and disability. Efforts should be directed towards the development of new technologies for improving accuracy in diagnosing complications following bone fractures. The variation in the levels of bone turnover markers (BTMs) have been assessed with regard to there ability to predict impaired fracture healing at an early stage, nevertheless the conclusions of some studies are not consensual. In this article the authors have revised the potential of BTMs as early predictors of prognosis in adult patients presenting traumatic bone fractures but who did not suffer from osteopenia or postmenopausal osteoporosis. The available information from the different studies performed in this field was systematized in order to highlight the most promising BTMs for the assessment of fracture healing outcome.

Comparing standard and low-cost tools for gradient evaluation along potential cycling paths

Promoting the use of non-motorized modes of transport, such as cycling, is an important contribution to the improvement of mobility, accessibility and equity in cities. Cycling offers a fast and cheap transportation option for short distances, helping to lower pollutant emissions and contributing to a healthier way of life. In order to make the cycling mode more competitive in relation to motorized traffic, it is necessary to evaluate the potential of alternatives from the perspective of the physical effort. One way to do so consists of assessing the suitability of locations for implementing cycling infrastructures. In this work, four tools to determine the gradient along potential cycling paths are compared. Furthermore, an evaluation of the reliability of some low-cost tools to measure this parameter was conducted, by comparison with standard measurements using cartographic plans, on a field case study applied to the city of Braga, Portugal. These tools revealed a good level of accuracy for the planning stage, but proved to be less reliable for use in design.

Modeling microbes: New methods for integrated metabolic and regulatory network reconstruction

PhD Thesis in Bioengineering

Reconstructing transcriptional regulatory networks using data integration and text mining

Transcriptional Regulatory Networks (TRNs) are powerful tool for representing several interactions that occur within a cell. Recent studies have provided information to help researchers in the tasks of building and understanding these networks. One of the major sources of information to build TRNs is biomedical literature. However, due to the rapidly increasing number of scientific papers, it is quite difficult to analyse the large amount of papers that have been published about this subject. This fact has heightened the importance of Biomedical Text Mining approaches in this task. Also, owing to the lack of adequate standards, as the number of databases increases, several inconsistencies concerning gene and protein names and identifiers are common. In this work, we developed an integrated approach for the reconstruction of TRNs that retrieve the relevant information from important biological databases and insert it into a unique repository, named KREN. Also, we applied text mining techniques over this integrated repository to build TRNs. However, was necessary to create a dictionary of names and synonyms associated with these entities and also develop an approach that retrieves all the abstracts from the related scientific papers stored on PubMed, in order to create a corpora of data about genes. Furthermore, these tasks were integrated into @Note, a software system that allows to use some methods from the Biomedical Text Mining field, including an algorithms for Named Entity Recognition (NER), extraction of all relevant terms from publication abstracts, extraction relationships between biological entities (genes, proteins and transcription factors). And finally, extended this tool to allow the reconstruction Transcriptional Regulatory Networks through using scientific literature.

Search for the Standard Model Higgs boson produced in association with top quarks and decaying into bb in pp collisions at √s = 8 TeV with the ATLAS detector

A search for the Standard Model Higgs boson produced in association with a pair of top quarks, tt¯H, is presented. The analysis uses 20.3 fb−1 of pp collision data at s√ = 8 TeV, collected with the ATLAS detector at the Large Hadron Collider during 2012. The search is designed for the H to bb¯ decay mode and uses events containing one or two electrons or muons. In order to improve the sensitivity of the search, events are categorised according to their jet and b-tagged jet multiplicities. A neural network is used to discriminate between signal and background events, the latter being dominated by tt¯+jets production. In the single-lepton channel, variables calculated using a matrix element method are included as inputs to the neural network to improve discrimination of the irreducible tt¯+bb¯ background. No significant excess of events above the background expectation is found and an observed (expected) limit of 3.4 (2.2) times the Standard Model cross section is obtained at 95% confidence level. The ratio of the measured tt¯H signal cross section to the Standard Model expectation is found to be μ=1.5±1.1 assuming a Higgs boson mass of 125 GeV.

Search for the bb¯ decay of the Standard Model Higgs boson in associated (W/Z)H production with the ATLAS detector

A search for the bb¯ decay of the Standard Model Higgs boson is performed with the ATLAS experiment using the full dataset recorded at the LHC in Run 1. The integrated luminosities used from pp collisions at s√=7 and 8 TeV are 4.7 and 20.3 fb−1, respectively. The processes considered are associated (W/Z)H production, where W→eν/μν, Z→ee/μμ and Z→νν. The observed (expected) deviation from the background-only hypothesis corresponds to a significance of 1.4 (2.6) standard deviations and the ratio of the measured signal yield to the Standard Model expectation is found to be μ=0.52±0.32(stat.)±0.24(syst.) for a Higgs boson mass of 125.36 GeV. The analysis procedure is validated by a measurement of the yield of (W/Z)Z production with Z→bb¯ in the same final states as for the Higgs boson search, from which the ratio of the observed signal yield to the Standard Model expectation is found to be 0.74±0.09(stat.)±0.14(syst.).

Implementação de sistemas de encriptação AES advanced encryption standard em hardware para segurança

Dissertação de mestrado integrado em Engenharia Electrónica Industrial e Computadores

Evolution of the gene regulatory network controlling flower dorsoventral asymmetry

Tese de Doutoramento em Biologia de Plantas.

Reconstruction of the regulatory network for Bacillus subtilis and reconciliation with gene expression data

The Supplementary Material for this article can be found online at: http://journal.frontiersin.org/article/10.3389/fmicb. 2016.00275

Requisitos de gestão e técnicos no Laboratório de Análises das Águas do Porto à luz da norma NP EN ISO-IEC 17025

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

Genetic regulatory mechanisms by means of extended interactive Petri nets

In our work we have chosen to integrate formalism for knowledge representation with formalism for process representation as a way to specify and regulate the overall activity of a multi-cellular agent. The result of this approach is XP,N, another formalism, wherein a distributed system can be modeled as a collection of interrelated sub-nets sharing a common explicit control structure. Each sub-net represents a system of asynchronous concurrent threads modeled by a set of transitions. XP,N combines local state and control with interaction and hierarchy to achieve a high-level abstraction and to model the complex relationships between all the components of a distributed system. Viewed as a tool XP,N provides a carefully devised conflict resolution strategy that intentionally mimics the genetic regulatory mechanism used in an organic cell to select the next genes to process.

Validation study of an automated wrist monitor, omron model HEM-608, compared with the standard methods for blood pressure measurement

OBJECTIVE - The aim of our study was to assess the profile of a wrist monitor, the Omron Model HEM-608, compared with the indirect method for blood pressure measurement. METHODS - Our study population consisted of 100 subjects, 29 being normotensive and 71 being hypertensive. Participants had their blood pressure checked 8 times with alternate techniques, 4 by the indirect method and 4 with the Omron wrist monitor. The validation criteria used to test this device were based on the internationally recognized protocols. RESULTS - Our data showed that the Omron HEM-608 reached a classification B for systolic and A for diastolic blood pressure, according to the one protocol. The mean differences between blood pressure values obtained with each of the methods were -2.3 +7.9mmHg for systolic and 0.97+5.5mmHg for diastolic blood pressure. Therefore, we considered this type of device approved according to the criteria selected. CONCLUSION - Our study leads us to conclude that this wrist monitor is not only easy to use, but also produces results very similar to those obtained by the standard indirect method.

Participación de las células supresoras mieloides (CSM) y T regulatorias (Treg) en el control de la infección con Trypanosoma cruzi y el desarrollo de la patología inflamatoria asociada a la infeccion. Role of Myeloid-Derived Suppressor Cells and regulatory T cells in the control of T. cruzi infection and the infection-associated pathology.

La infección de mamíferos con el T. cruzi resulta en diferentes alteraciones inmunológicas que permiten la persistencia crónica del parásito y destrucción inflamatoria progresiva del tejido cardiaco, nervioso y hepático. Los mecanismos responsables de la patología de la enfermedad de Chagas han sido materia de intensa investigación habiéndose propuesto que el daño producido en esta enfermedad puede ser consecuencia de la respuesta inflamatoria del individuo infectado y/o de una acción directa del parásito sobre los tejidos del hospedador. El propósito del presente proyecto es estudiar comparativamente, en dos cepas de ratones con diferente susceptibilidad a la infección y desarrollo de patología, la participación y los mecanismos efectores de las células supresoras mieloides (CSM) y las celulas T regulatorias inducidas por la infección experimental con Trypanosoma cruzi en el control de la infección con este protozoario y en el desarrollo de la patología hepática siendo los objetivos especificos desarrolar: - Investigar la generación y/o reclutamiento de células de CSM en bazo e hígado de ratones infectados con Trypanosoma cruzi y su contribución a la desigual susceptibilidad a la infección y respuesta inmune desarrollada en las cepas de ratones BALB/c y C57BL/6; - Investigar la capacidad de las CSM inducidas por la infección con T. cruzi en bazo e hígado de ratones de ambas cepas para suprimir la respuesta de células T in vitro e indagar sobre los mecanismos de supresión utilizados; - Investigar la generación y/o reclutamiento de células Treg durante la infección experimental con Trypanosoma cruzi, su participación en la desigual susceptibilidad a la infección y respuesta inmune desarrollada en ambas cepas de ratones y los mecanismos de supresión utilizados. - Analizar en tejido hepático o leucocitos infiltrantes la presencia de COX2, PGE2, MMP2 y 9, IL1b, IL6, IDO, IL10 y GM-CSF capaces de inducir la expansión de las CSM; - Dilucidar si la administración del ligando para TLR2 (Pam3CyS) previo a la infección de ratones C57BL/6 (en los cuales se detecta un menor número de CSM) es capaz de modular la respuesta inflamatoria y el daño hepático a través de la inducción de CSM y/o T reg en hígado y bazo. La comprension de los eventos celulares y moleculares que regulan la producción de citoquinas pro- y anti-inflamatorias y otros mediadores, así como el papel de los receptores de la inmunidad innata durante la infección con T. cruzi contribuirá a responder interrogantes que son claves para el diseño de nuevas estrategias de intervención inmune tendientes a preservar los mecanismos de defensa del huésped. Two nonexclusive mechanisms have been proposed to explain the Chagas’s disease pathology: 1) The pathology of the disease seems to be consequence of the inflammatory response triggered for the parasite; or 2) The damage is produced by the parasite direct effect. Recently, we reported that TLR2, TLR4 and TLR9 (innate immune response receptors) are differentially modulated in injured livers from BALB/c (lesser liver pathology) and C57BL/6 (elevated liver pathology) mice during Trypanosoma cruzi infection. The aim of our proposal is the study of role of Myeloid-Derived Suppressor Cells (MDSC) and regulatory T cells in the control of T. cruzi infection and the infection-associated pathology. Our specific aims are: -To study the induction or recruitment of MDSC in splenn and liver of BALB/c and C57BL/6 mice and their relationship with the differential susceptibility and immune response observed in these both mice strains; - To determine the ability and the mechanisms used by the T. cruzi-induced MDSC to suppress the T cell proliferative response; -To study the induction or recruitment of Treg in liver of BALB/c and C57BL/6 mice and their relationship with the differential susceptibility and immune response observed in these both mice strains; -To analize in liver tissue or tissue infiltrating lymphocytes the activation of COX2, PGE2, MMP2 y 9, IL1b, IL6, IDO, IL10 y GM-CSF known to promote the development of MDSC; -To determine whether the treatment with Pam3CyS (TLR2 ligand) is able to modulate the liver inflammatory respose and damage througth the induction of MDSC or Treg.

A comparison of environmental licensing systems in operation in the wood panel manufacturing industry in the Northern Hemisphere

The objective of this thesis is to compare and contrast environmental licensing systems, for the wood panel industry, in a number of countries in order to determine which system is the best from an environmental and economic point of view. The thesis also examines the impact which government can have on industry and the type of licensing system in operation in a country. Initially, the thesis investigates the origins of the various environmental licensing systems which are in operation in Ireland, Scotland, Wales, France, USA and Canada. It then examines the Environmental Agencies which control and supervise industry in these countries. The impact which the type of government (i.e. unitary or federal) in charge in any particular country has on industry and the Regulatory Agency in that country is then described. Most of the mills in the thesis make a product called OSB (Oriented Strand Board) and the manufacturing process is briefly described in order to understand where the various emissions are generated. The main body of the thesis examines a number of environmental parameters which have emission limit values in the licenses examined, although not all of these parameters have emission limit values in all of the licenses. All of these parameters are used as indicators of the potential impact which the mill can have on the environment. They have been set at specific levels by the Environmental Agencies in the individual countries to control the impact of the mill. Following on from this, the two main types of air pollution control equipment (WESPs and RTOs) are described in regard to their function and capabilities. The mill licenses are then presented in the form of results tables which compare air results and water results separately. This is due to the fact that the most significant emission from this type of industry is to air. A matrix system is used to compare the licenses so that the comparison can be as objective as possible. The discussion examines all of the elements previously described and from this it was concluded that the IPC licensing system is the best from an environmental and economic point of view. It is a much more expensive system to operate than the other systems examined, but it is much more comprehensive and looks at the mill as a whole rather than fragmenting it. It was also seen that the type of environmental licensing system which is in place in a country can play a role in the locating of an industry as certain systems were seen to have more stringent standards attached to them. The type of standard in place in a country is in turn influenced by the type of government which is in place in that country.