Border Trade and Economic Zones on the North-South Economic Corridor: Focusing on the Connecting Points between the Four Countries

The North-South Economic Corridor (NSEC), the road between Bangkok and Kunming, China, including the Laos route (R3B) and the Myanmar route (R3B), has been developed since 1998 following the GMS program. The region covering Yunnan Province in China, Shan State in Myanmar, Northern Laos and Northern Thailand has historical and ethnic closeness, and is a comparatively poor mountainous, boundary area. In the wake of the development of the NSEC, however, the region has started to show signs of change. Consequently, a review is to be carried out concerning the movement of people and cars, border trade and the situation concerning the progress of border economic zones at the five nodal border points in the four countries, and over three routes: R3A, R3B, and the Mekong River route.

Chapter 3 Industrial Location in Cambodia: Industrial Policies and Economic Statistics

Cambodia has experienced high economic growth in the last decade. Because most of its industries were destroyed during the Pol Pot regime and civil war, in the last 20 years the country has been working hard to liberalize its economy to attract foreign investors With its efforts to join the regional and international community and with changes in the international trade environment, Cambodia started to grow its economy in the late 1990s. Now, in the early 21st century, the Cambodian economy seems to be prepared to take off. We can observe a kind of industrial agglomeration occurring, even though still at a small scale. In this paper, first, I will review the history of Cambodia’s economic development since the late 1980s. Second, I will examine the economic policies, laws, rules, and other environmental factors which have influenced industrial development and industrial location in Cambodia. Third, I will introduce industrial location in the late 2000s. Lastly, I will introduce some statistical data for the future analysis of industrial location in Cambodia.

Chapter 4 A Review of the Availability of and Studies on Spatial Economic Data in Laos

Spatial data are being increasingly used in a wide range of disciplines, a fact that is clearly reflected in the recent trend to add spatial dimensions to the conventional social sciences. Economics is by no means an exception. On one hand, spatial data are indispensable to many branches of economics such as economic geography, new economic geography, or spatial economics. On the other hand, macroeconomic data are becoming available at more and more micro levels, so that academics and analysts take it for granted that they are available not only for an entire country, but also for more detailed levels (e.g. state, province, and even city). The term ‘spatial economics data’ as used in this report refers to any economic data that has spatial information attached. This spatial information can be the coordinates of a location at best or a less precise place name as is used to describe administrative units. Obviously, the latter cannot be used without a map of corresponding administrative units. Maps are therefore indispensible to the analysis of spatial economic data without absolute coordinates. The aim of this report is to review the availability of spatial economic data that pertains specifically to Laos and academic studies conducted on such data up to the present. In regards to the availability of spatial economic data, efforts have been made to identify not only data that has been made available as geographic information systems (GIS) data, but also those with sufficient place labels attached. The rest of the report is organized as follows. Section 2 reviews the maps available for Laos, both in hard copy and editable electronic formats. Section 3 summarizes the spatial economic data available for Laos at the present time, and Section 4 reviews and categorizes the many economic studies utilizing these spatial data. Section 5 give examples of some of the spatial industrial data collected for this research. Section 6 provides a summary of the findings and gives some indication of the direction of the final report due for completion in fiscal 2010.

Chapter 6 Economic integration and changes in industrial location in Vietnam

Vietnam has been praised for its achievements in economic growth and success in poverty reduction over the last two decades. The incidence of poverty reportedly fell from 58.1% in 1993 to 19.5% in 2004 (VASS [2006, 13]). The country is also considered to have only a moderate level of aggregate economic inequality by international comparisons. As of the early 2000s, Vietnam’s consumption-based Gini coefficient is found to be comparable to that of other countries with similar levels of per capita GDP. The Gini index did increase between 1993 and 2004, but rather slowly, from 0.34 to 0.37 (VASS [2006, 13]). Yet, as the country moves on with its market oriented reforms, the question of inequality has been highlighted in policy and academic discourses. In particular, it is pointed out that socio-economic inequalities between regions (or provinces) are significant and have been widening behind aggregate figures (NCSSH [2001], Mekong Economics [2005], VASS [2006]). Between 1993 and 2004, while real per capita expenditure increased in all regions, it grew fastest in those regions with the highest per capita expenditures and vice versa, resulting in greater regional disparities (VASS [2006, 37]). A major contributing factor to such regional inequalities is the uneven distribution of industry within the country. According to the Statistical Yearbook of Vietnam, of the country's gross industrial output in 2007, over 50% belongs to the South East region, close to 25% to the Red River Delta, and about 10% to the Mekong River Delta. All remaining regions share some 10% of the country's gross industrial output. At a quick glance, the South East increased its share of the total industrial gross output in the 1990s, while the Red River Delta started to gain ground in more recent years. How can the government deal with regional disparities is a valid question. In order to offer an answer, it is necessary in the first place to grasp the trend of disparities as well as its background. To that end, this paper is a preparatory endeavor. Regional disparities in industrial activities can essentially be seen as a result of the location decisions of enterprises. While the General Statistics Office (GSO) of Vietnam has conducted one enterprise census (followed by annual enterprise surveys) and two stages of establishment censuses since 2000, sectorally and geographically disaggregated data are not readily available. Therefore, for the moment, we will draw on earlier studies of industrial location and the determinants of enterprises’ location decisions in Vietnam. The remainder of this paper is structured as follows. The following two sections deal with the country context. Section 2 will outline some major developments in Vietnam’s international economic relations that may affect sub-national location of industry. According to the theory of spatial economics, economic integration is seen as a major driver of changes in industrial location, both between and within countries (Nishikimi [2008]). Section 3, on the other hand, will consider some possible factors affecting geographic distribution of industry in the domestic sphere. In Section 4, existing literature on industrial and firm location will be examined, and Section 5 will briefly summarize the findings and suggest some areas for future research.

Chapter 7 Clusters of Modern and Local Industries in Vietnam

Since the introduction of the Doi Moi ('renovation') economic reform in 1986, Vietnam has experienced a transformation of its economic management, from a central planning economy to a market-oriented economy. High economic growth, created by the liberalization of activities in all sectors of the economy, has changed the economic structure of the country, and the once agriculture-based and poverty-stricken land now generates a midlevel income and possesses many industrial bases. Economic growth has also changed the landscape of the country. Business complexes have been built in metropolises like Ho Chi Minh City and Hanoi, and rice fields have been converted into industrial zones. As the number of enterprises increased, areas began to emerge where many enterprises agglomerated. Some of these 'clusters' were groups of cottage industry households, while many others were large-scale industrial clusters. As Porter [1998] argues, industrial clusters are the source of a nation's 'competitive advantage'. McCarty et al. [2005] indicate that in some key industries in Vietnam, some clusters of enterprises have been created, although the degree of agglomeration differs from one industry to another. Using industry census data from 2001, they include dot density maps for the 12 leading manufacturing industries in Vietnam. They show that most of the industries analyzed are clustered either in Hanoi or Ho Chi Minh City (or both). Among these 12 industries, the garments industry has the greatest tendency to cluster, followed by textile, rice, seafood, and paper industries. The fact that industrial clusters have begun to form in some areas could be a positive sign for Vietnam's future economic development. What is lacking in McCarty et al. [2005], however, is the identification of the participants in the industrial clusters. Some argue for the importance of small and medium enterprises (SMEs) in Vietnam's economic development (e.g. Nguyen Tri Thanh [2007], Tran Tien Cuong et al. [2008]), while others stress the impact of foreign direct investments (FDI) (for example, Tuan Bui [2009]). Adding information about the participants in the above cluster study (and in other studies of spatial patterns of location of enterprises) may broaden the scope for analysis of economic development in Vietnam. This study aims to reveal the characteristics of industrial clusters in terms of their participants and locations. The findings of the study may provide basic information for evaluating the effects of agglomeration and the robustness of the effects in the industrial clusters in Vietnam. Section 1 describes the characteristics of economic entities in Vietnam such as ownership, size of enterprise, and location. Section 2 examines qualitative aspects of industrial clusters identified in McCarty et al. [2005] and uses information on the size and ownership of clusters. Three key industries (garments, consumer electronics, and motor vehicle) are selected for the study. Section 3 identifies another type of cluster commonly seen in Vietnam, composed of local industries and called 'craft villages'. Many such villages have been developed since the early 1990s. The study points out that some of these villages have become industrialized (or are becoming industrialized) by introducing modern modes of production and by employing thousands of laborers.

Chapter 8 Location Choice of Japanese Multinationals: Country Characteristics or Region Characteristics?

In the present global era in which firms choose the location of their plants beyond national borders, location characteristics are important for attracting multinational enterprises (MNEs). The better access to countries with large market is clearly attractive for MNEs. For example, special treatments on tariffs such as the Generalized System of Preferences (GSP) are beneficial for MNEs whose home country does not have such treatments. Not only such country characteristics but also region characteristics (i.e. province-level or city-level ones) matter, particularly in the case that location characteristics differ widely between a nation's regions. The existence of industrial concentration, that is, agglomeration, is a typical regional characteristic. It is with consideration of these country-level and region-level characteristics that MNEs decide their location abroad. A large number of academic studies have investigated in what kinds of countries MNEs locate, i.e. location choice analysis. Employing the usual new economic geography model (i.e. constant elasticity of substitution (CES) utility function, Dixit-Stiglitz monopolistic competition, and ice-berg trade costs), the literature derives the profit function, of which coefficients are estimated using maximum likelihood procedures. Recent studies are as follows: Head, Rise, and Swenson (1999) for Japanese MNEs in the US; Belderbos and Carree (2002) for Japanese MNEs in China; Head and Mayer (2004) for Japanese MNEs in Europe; Disdier and Mayer (2004) for French MNEs in Europe; Castellani and Zanfei (2004) for large MNEs worldwide; Mayer, Mejean, and Nefussi (2007) for French MNEs worldwide; Crozet, Mayer, and Mucchielli (2004) for MNEs in France; and Basile, Castellani, and Zanfei (2008) for MNEs in Europe. At the present time, three main topics can be found in this literature. The first introduces various location elements as independent variables. The above-mentioned new economic geography model usually yields the profit function, which is a function of market size, productive factor prices, price of intermediate goods, and trade costs. As a proxy for the price of intermediate goods, the measure of agglomeration is often used, particularly the number of manufacturing firms. Some studies employ more disaggregated numbers of manufacturing firms, such as the number of manufacturing firms with the same nationality as the firms choosing the location (e.g., Head et al., 1999; Crozet et al., 2004) or the number of firms belonging to the same firm group (e.g., Belderbos and Carree, 2002). As part of trade costs, some investment climate measures have been examined: free trade zones in the US (Head et al., 1999), special economic zones and opening coastal cities in China (Belderbos and Carree, 2002), and Objective 1 structural funds and cohesion funds in Europe (Basile et al., 2008). Second, the validity of proxy variables for location elements is further examined. Head and Mayer (2004) examine the validity of market potential on location choice. They propose the use of two measures: the Harris market potential index (Harris, 1954) and the Krugman-type index used in Redding and Venables (2004). The Harris-type index is simply the sum of distance-weighted real GDP. They employ the Krugman-type market potential index, which is directly derived from the new economic geography model, as it takes into account the extent of competition (i.e. price index) and is constructed using estimators of importing country dummy variables in the well-known gravity equation, as in Redding and Venables (2004). They find that "theory does not pay", in the sense that the Harris market potential outperforms Krugman's market potential in both the magnitude of its coefficient and the fit of the model to be estimated. The third topic explores the substitution of location by examining inclusive values in the nested-logit model. For example, using firm-level data on French investments both in France and abroad over the 1992-2002 period, Mayer et al. (2007) investigate the determinants of location choice and assess empirically whether the domestic economy has been losing attractiveness over the recent period or not. The estimated coefficient for inclusive value is strongly significant and near unity, indicating that the national economy is not different from the rest of the world in terms of substitution patterns. Similarly, Disdier and Mayer (2004) investigate whether French MNEs consider Western and Eastern Europe as two distinct groups of potential host countries by examining the coefficient for the inclusive value in nested-logit estimation. They confirm the relevance of an East-West structure in the country location decision and furthermore show that this relevance decreases over time. The purpose of this paper is to investigate the location choice of Japanese MNEs in Thailand, Cambodia, Laos, Myanmar, and Vietnam, and is closely related to the third topic mentioned above. By examining region-level location choice with the nested-logit model, I investigate the relative importance of not only country characteristics but also region characteristics. Such investigation is invaluable particularly in the case of location choice in those five countries: industrialization remains immature in those countries which have not yet succeeded in attracting enough MNEs, and as a result, it is expected that there are not yet crucial regional variations for MNEs within such a nation, meaning the country characteristics are still relatively important to attract MNEs. To illustrate, in the case of Cambodia and Laos, one of the crucial elements for Japanese MNEs would be that LDC preferential tariff schemes are available for exports from Cambodia and Laos. On the other hand, in the case of Thailand and Vietnam, which have accepted a relatively large number of MNEs and thus raised the extent of regional inequality, regional characteristics such as the existence of agglomeration would become important elements in location choice. Our sample countries seem, therefore, to offer rich variations for analyzing the relative importance between country characteristics and region characteristics. Our empirical strategy has a further advantage. As in the third topic in the location choice literature, the use of the nested-logit model enables us to examine substitution patterns between country-based and region-based location decisions by MNEs in the concerned countries. For example, it is possible to investigate empirically whether Japanese multinational firms consider Thailand/Vietnam and the other three countries as two distinct groups of potential host countries, by examining the inclusive value parameters in nested-logit estimation. In particular, our sample countries all experienced dramatic changes in, for example, economic growth or trade costs reduction during the sample period. Thus, we will find the dramatic dynamics of such substitution patterns. Our rigorous analysis of the relative importance between country characteristics and region characteristics is invaluable from the viewpoint of policy implications. First, while the former characteristics should be improved mainly by central government in each country, there is sometimes room for the improvement of the latter characteristics by even local governments or smaller institutions such as private agencies. Consequently, it becomes important for these smaller institutions to know just how crucial the improvement of region characteristics is for attracting foreign companies. Second, as economies grow, country characteristics become similar among countries. For example, the LCD preferential tariff schemes are available only when a country is less developed. Therefore, it is important particularly for the least developed countries to know what kinds of regional characteristics become important following economic growth; in other words, after their country characteristics become similar to those of the more developed countries. I also incorporate one important characteristic of MNEs, namely, productivity. The well-known Helpman-Melitz-Yeaple model indicates that only firms with higher productivity can afford overseas entry (Helpman et al., 2004). Beyond this argument, there may be some differences in MNEs' productivity among our sample countries and regions. Such differences are important from the viewpoint of "spillover effects" from MNEs, which are one of the most important results for host countries in accepting their entry. The spillover effects are that the presence of inward foreign direct investment (FDI) aises domestic firms' productivity through various channels such as imitation. Such positive effects might be larger in areas with more productive MNEs. Therefore, it becomes important for host countries to know how much productive firms are likely to invest in them. The rest of this paper is organized as follows. Section 2 takes a brief look at the worldwide distribution of Japanese overseas affiliates. Section 3 provides an empirical model to examine their location choice, and lastly, we discuss future works to estimate our model.

Introduction New Challenges in New Economic Geography

2009年度調査研究報告書

Economic integration, location of industries, and frontier regions : evidence from Cambodia

We examine changes in the location of economic activity in Cambodia between 1998 and 2008 in terms of employment growth. During this period, Cambodia joined ASEAN and increased trade with neighboring countries. Drawing on the predictions of the new economic geography, we focus on frontier regions such as border regions and international port cities. We examine the changing state of manufacturing in Cambodia from its initial concentration in Greater Phnom Penh to its growth in the frontier regions. The results suggest that economic integration and concomitant trade linkages may lead to the industrial development of frontier regions as well as the metropolitan areas in Cambodia.

Factor decomposition of income inequality change : Japan's regional income disparity from 1955 to 1998

We propose a method for the decomposition of inequality changes based on panel data regression. The method is an efficient way to quantify the contributions of variables to changes of the Theil T index while satisfying the property of uniform addition. We illustrate the method using prefectural data from Japan for the period 1955 to 1998. Japan experienced a diminishing of regional income disparity during the years of high economic growth from 1955 to 1973. After estimating production functions using panel data for prefectures in Japan, we apply the new decomposition approach to identify each production factor’s contributions to the changes of per capita income inequality among prefectures. The decomposition results show that total factor productivity (residual) growth, population change (migration), and public capital stock growth contributed to the diminishing of per capita income disparity.

Two-polar growth strategy in Myanmar : seeking "high" and "balanced" development

The Thein Sein government of Myanmar seeks higher and balanced economic growth. This is a challenge for the government since some economic literature identifies a trade-off between higher economic growth and better regional equality, especially for countries in the early stages of development. In this paper, we propose a two-polar growth strategy as one that includes both "high" and "balanced" growth. The first growth pole is Yangon, and the second is Mandalay. Nay Pyi Taw, the national capital, will develop as an administrative centre, not as an economic or commercial one. We also propose border development with enhanced connectivity with richer neighboring countries as a complementary strategy to the two growth poles. Effects of the two-polar growth strategy with border development are tested using a Geographical Simulation Model (GSM).

On the sustainability of a monocentric city : lower transport costs from new transport facilities

This paper proposes a general equilibrium model of a monocentric city based on Fujita and Krugman (1995). Two rates of transport costs per distance and for the same good are introduced. The model assumes that lower transport costs are available at a few points on a line. These lower costs represent new transport facilities, such as high-speed motorways and railways. Findings is that new transport facilities connecting the city and hinterlands strengthen the lock-in effects, which describes whether a city remains where it is forever after being created. Furthermore, the effect intensifies with better agricultural technologies and a larger population in the economy. The relationship between indirect utility and population size has an inverted U-shape, even if new transport facilities are used. However, the population size that maximizes indirect utility is smaller than that found in Fujita and Krugman (1995).

Comparing the economic impacts of Asian integration by computational simulation analysis

The Geographical Simulation Model developed by IDE-JETRO (IDE-GSM) is a computer simulation model based on spatial economics. IDE-GSM enables us to predict the economic impacts of various trade and transport facilitation measures. Here, we mainly compare the prioritized projects of the Master Plan on ASEAN Connectivity (MPAC) and the Comprehensive Asia Development Plan (CADP). MPAC focus on specific hard or soft infrastructure projects that connect one ASEAN member state to another while the CADP emphasizes the importance of economic corridors or linkages between a large cluster and another cluster. As compared with MPAC projects, the simulation analysis shows that CADP projects have much larger positive impacts on ASEAN countries.

Does technological progress magnify regional disparities?

We study how technological progress in manufacturing and transportation to-gether with migration costs interact to shape the space-economy. Rising labor productivity in the manufacturing sector fosters the agglomeration of activities, whereas falling transport costs associated with technological and organizational in-novations fosters their dispersion. Since these two forces have been at work for a long time, the final outcome must depend on how drops in the costs of producing and trading goods interact with the various costs borne by migrants. Finally, when labor is heterogeneous, the most efficient workers of the less productive region are the first to move to the more productive region.

Desintegración vertical en la industria del automóvil en España: un caso de estudio = Vertical disintegration in the automotive industry in Spain: a case study

En los años recientes se ha producido un rápido crecimiento del comercio internacional en productos semielaborados que son diseñados, producidos y ensamblados en diferentes localizaciones a lo largo de diferentes países, debido principalmente a los siguientes motivos: el desarrollo de las tecnologías de la información, la reducción de los costes de transporte, la liberalización de los mercados de capitales, la armonización de factores institucionales, la integración económica regional que implica la reducción y la eliminación de las barreras al comercio, el desarrollo económico de los países emergentes, el uso de economías de escala, así como una desregulación del comercio internacional. Todo ello ha incrementado la competencia a nivel mundial en los mercados y ha posibilitado a las compañías tener más facilidad de acceso a potenciales mercados, así como a la adquisición de capacidades y conocimientos en otros países y a la realización de alianzas estratégicas internacionales con terceros, creando un entorno con mayor incertidumbre y más exigente para las compañías que componen una industria, y que tiene consecuencias directas en las operaciones de las compañías y en la organización de su producción. Las compañías, para adaptarse, ser competitivas y beneficiarse de este nuevo escenario globalizado y más competitivo, han externalizado partes del proceso productivo hacia proveedores especializados, creando un nuevo mercado intermedio que divide el proceso productivo, anteriormente integrado en las compañías que conforman una industria, entre dos conjuntos de empresas especializadas en esa industria. Dicho proceso suele ocurrir conservando la industria en que tiene lugar, los mismos servicios y productos, la tecnología empleada y las compañías originales que la conformaban previamente a la desintegración vertical. Todo ello es así debido a que es beneficioso tanto para las compañías originales de la industria como para las nuevas compañías de este mercado intermedio por diversos motivos. La desintegración vertical en una industria tiene unas consecuencias que la transforman completamente, así como la forma de operar de las compañías que la integran, incluso para aquellas que permanecen verticalmente integradas. Una de las características más importantes de esta desintegración vertical en una industria es la posibilidad que tiene una compañía de adquirir a una tercera la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por la compañía adquiriente con la práctica del outsourcing; así mismo, una compañía puede realizar la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por una tercera compañía con la práctica de la fragmentación. El principal objetivo de la presente investigación es el estudio de los motivos, los facilitadores, los efectos, las consecuencias y los principales factores significativos, microeconómicos y macroeconómicos, que desencadenan o incrementan la práctica de la desintegración vertical en una industria; para ello, la investigación se divide en dos líneas completamente diferenciadas: el estudio de la práctica del outsourcing y, por otro lado, el estudio de la fragmentación por parte de las compañías que componen la industria del automóvil en España, puesto que se trata de una de las industrias más desintegradas verticalmente y fragmentadas, y este sector posee una gran importancia en la economía del país. En primer lugar, se hace una revisión de la literatura existente relativa a los siguientes aspectos: desintegración vertical, outsourcing, fragmentación, teoría del comercio internacional, historia de la industria del automóvil en España y el uso de las aglomeraciones geográficas y las tecnologías de la información en el sector del automóvil. La metodología empleada en cada uno de ellos ha sido diferente en función de la disponibilidad de los datos y del enfoque de investigación: los factores microeconómicos, utilizando el outsourcing, y los factores macroeconómicos, empleando la fragmentación. En el estudio del outsourcing, se usa un índice basado en las compras externas sobre el valor total de la producción. Así mismo, se estudia su correlación y significación con las variables económicas más importantes que definen a una compañía del sector del automóvil, utilizando la técnica estadística de regresión lineal. Aquellas variables relacionadas con la competencia en el mercado, la externalización de las actividades de menor valor añadido y el incremento de la modularización de las actividades de la cadena de valor, han resultado significativas con la práctica del outsourcing. En el estudio de la fragmentación se seleccionan un conjunto de factores macroeconómicos, comúnmente usados en este tipo de investigaciones, relacionados con las principales magnitudes económicas de un país, y un conjunto de factores macroeconómicos, no comúnmente usados en este tipo de investigaciones, relacionados con la libertad económica y el comercio internacional de un país. Se emplea un modelo de regresión logística para identificar qué factores son significativos en la práctica de la fragmentación. De entre todos los factores usados en el modelo, los relacionados con las economías de escala y los costes de servicio han resultado significativos. Los resultados obtenidos de los test estadísticos realizados en el modelo de regresión logística han resultado satisfactorios; por ello, el modelo propuesto de regresión logística puede ser considerado sólido, fiable y versátil; además, acorde con la realidad. De los resultados obtenidos en el estudio del outsourcing y de la fragmentación, combinados conjuntamente con el estado del arte, se concluye que el principal factor que desencadena la desintegración vertical en la industria del automóvil es la competencia en el mercado de vehículos. Cuanto mayor es la demanda de vehículos, más se reducen los beneficios y la rentabilidad para sus fabricantes. Estos, para ser competitivos, diferencian sus productos de la competencia centrándose en las actividades que mayor valor añadido aportan al producto final, externalizando las actividades de menor valor añadido a proveedores especializados, e incrementando la modularidad de las actividades de la cadena de valor. Las compañías de la industria del automóvil se especializan en alguna o varias de estas actividades modularizadas que, combinadas con el uso de factores facilitadores como las economías de escala, las tecnologías de la información, las ventajas de la globalización económica y la aglomeración geográfica de una industria, incrementan y motivan la desintegración vertical en la industria del automóvil, desencadenando la coespecialización en dos sectores claramente diferenciados: el sector de fabricantes de vehículos y el sector de proveedores especializados. Cada uno de ellos se especializa en unas actividades y en unos productos o servicios específicos de la cadena de valor, lo cual genera las siguientes consecuencias en la industria del automóvil: se reducen los costes de transacción en los productos o servicios intercambiados; se incrementan la relación de dependencia entre fabricantes de vehículos y proveedores especializados, provocando un aumento en la cooperación y la coordinación, acelerando el proceso de aprendizaje, posibilitando a ambos adquirir nuevas capacidades, conocimientos y recursos, y creando nuevas ventajas competitivas para ambos; por último, las barreras de entrada a la industria del automóvil y el número de compañías se ven alteradas cambiando su estructura. Como futura línea de investigación, los fabricantes de vehículos tenderán a centrarse en investigar, diseñar y comercializar el producto o servicio, delegando el ensamblaje en manos de nuevos especialistas en la materia, el contract manufacturer; por ello, sería conveniente investigar qué factores motivantes o facilitadores existen y qué consecuencias tendría la implantación de los contract manufacturer en la industria del automóvil. 1.1. ABSTRACT In recent years there has been a rapid growth of international trade in semi-finished products designed, produced and assembled in different locations across different countries, mainly due to the following reasons: development of information technologies, reduction of transportation costs, liberalisation of capital markets, harmonisation of institutional factors, regional economic integration, which involves the reduction and elimination of trade barriers, economic development of emerging countries, use of economies of scale and deregulation of international trade. All these factors have increased competition in markets at a global level and have allowed companies to gain easier access to potential markets and to the acquisition of skills and knowledge in other countries, as well as to the completion of international strategic alliances with third parties, thus creating a more demanding and uncertain environment for these companies constituting an industry, which has a direct impact on the companies' operations and the organization of their production. In order to adapt, be competitive and benefit from this new and more competitive global scenario, companies have outsourced some parts of their production process to specialist suppliers, generating a new intermediate market which divides the production process, previously integrated in the companies that made up the industry, into two sets of companies specialized in that industry. This process often occurs while preserving the industry where it takes place, its same services and products, the technology used and the original companies that formed it prior to vertical disintegration. This is because it is beneficial for both the industry's original companies and the companies belonging to this new intermediate market, for various reasons. Vertical disintegration has consequences which completely transform the industry where it takes place as well as the modus operandi of the companies that are part of it, even of those who remain vertically integrated. One of the most important features of vertical disintegration of an industry is the possibility for a company to acquire from a third one the first part of the production process or a semi-finished product, which will then be finished by the acquiring company through the practice of outsourcing; also, a company can perform the first part of the production process or a semi-finish product, which will then be completed by a third company through the practice of fragmentation. The main objective of this research is to study the motives, facilitators, effects, consequences and major significant microeconomic and macroeconomic factors that trigger or increase the practice of vertical disintegration in a certain industry; in order to do so, research is divided into two completely differentiated lines: on the one hand, the study of the practise of outsourcing and, on the other, the study of fragmentation by companies constituting the automotive industry in Spain, since this is one of the most vertically disintegrated and fragmented industries and this particular sector is of major significance in this country's economy. First, a review is made of the existing literature, on the following aspects: vertical disintegration, outsourcing, fragmentation, international trade theory, history of the automobile industry in Spain and the use of geographical agglomeration and information technologies in the automotive sector. The methodology used for each of these aspects has been different depending on the availability of data and the research approach: the microeconomic factors, using outsourcing, and the macroeconomic factors, using fragmentation. In the study on outsourcing, an index is used based on external purchases in relation to the total value of production. Likewise, their significance and correlation with the major economic variables that define an automotive company are studied, using the statistical technique of linear regression. Variables related to market competition, outsourcing of lowest value-added activities and increased modularisation of the activities of the value chain have turned out to be significant with the practice of outsourcing. In the study of fragmentation, a set of macroeconomic factors commonly used for this type of research, is selected, related to the main economic indicators of a country, as well as a set of macroeconomic factors, not commonly used for this type of research, which are related to economic freedom and the international trade of a certain country. A logistic regression model is used to identify which factors are significant in the practice of fragmentation. Amongst all factors used in the model, those related to economies of scale and service costs have turned out to be significant. The results obtained from the statistical tests performed on the logistic regression model have been successful; hence, the suggested logistic regression model can be considered to be solid, reliable and versatile; likewise, it is in line with reality. From the results obtained in the study of outsourcing and fragmentation, combined with the state of the art, it is concluded that the main factor that triggers vertical disintegration in the automotive industry is competition within the vehicle market. The greater the vehicle demand, the lower the earnings and profitability for manufacturers. These, in order to be competitive, differentiate their products from the competition by focusing on those activities that contribute with the highest added value to the final product, outsourcing the lower valueadded activities to specialist suppliers, and increasing the modularity of the activities of the value chain. Companies in the automotive industry specialize in one or more of these modularised activities which, combined with the use of enabling factors such as economies of scale, information technologies, the advantages of economic globalisation and the geographical agglomeration of an industry, increase and encourage vertical disintegration in the automotive industry, triggering co-specialization in two clearly distinct sectors: the sector of vehicle manufacturers and the specialist suppliers sector. Each of them specializes in certain activities and specific products or services of the value chain, generating the following consequences in the automotive industry: reduction of transaction costs of the goods or services exchanged; growth of the relationship of dependency between vehicle manufacturers and specialist suppliers, which causes an increase in cooperation and coordination, accelerates the learning process, enables both to acquire new skills, knowledge and resources, and creates new competitive advantages for both; finally, barriers to entry the automotive industry and the number of companies are altered, changing their structure. As a future line of research, vehicle manufacturers will tend to focus on researching, designing and marketing the product or service, delegating the assembly in the hands of new specialists in the field, the contract manufacturer; for this reason, it would be useful to investigate what motivating or facilitating factors exist in this respect and what consequences would the implementation of contract manufacturers have in the automotive industry.

Modelos de análisis econométrico espacial aplicados al desarrollo económico

Los modelos de desarrollo regional, rural y urbano arrancaron en la década de los 90 en Estados Unidos, modelando los factores relacionados con la economía que suministran información y conocimiento acerca de cómo los parámetros geográficos y otros externos influencian la economía regional. El desarrollo regional y en particular el rural han seguido diferentes caminos en Europa y España, adoptando como modelo los programas estructurales de la UE ligados a la PAC. El Programa para el Desarrollo Rural Sostenible, recientemente lanzado por el Gobierno de España (2010) no profundiza en los modelos económicos de esta economía y sus causas. Este estudio pretende encontrar pautas de comportamiento de las variables de la economía regional-rural, y como el efecto de distribución geográfica de la población condiciona la actividad económica. Para este propósito, y utilizando datos espaciales y económicos de las regiones, se implementaran modelos espaciales que permitan evaluar el comportamiento económico, y verificar hipótesis de trabajo sobre la geografía y la economía del territorio. Se utilizarán modelos de análisis espacial como el análisis exploratorio espacial y los modelos econométricos de ecuaciones simultáneas, y dentro de estas los modelos ampliamente utilizados en estudios regionales de Carlino-Mills- Boarnet. ABSTRACT The regional development models for rural and urban areas started in USA in the ´90s, modeling the economy and the factors involved to understand and collect the knowledge of how the external parameters influenced the regional economy. Regional development and in particular rural development has followed different paths in Europe and Spain, adopting structural programs defined in the EU Agriculture Common Policy. The program for Sustainable Rural Development recently implemented in Spain (2010) is short sighted considering the effects of the regional economy. This study endeavors to underline models of behavior for the rural and regional economy variables, and how the regional distribution of population conditions the economic activities. For that purpose using current spatial regional economic data, this study will implement spatial economic models to evaluate the behavior of the regional economy, including the evaluation of working hypothesis about geography and economy in the territory. The approach will use data analysis models, like exploratory spatial data analysis, and spatial econometric models, and in particular for its wide acceptance in regional analysis, the Carlino-Mills-Boarnet equations model.