Spherical collapse in chameleon models

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Thermal comfort in reduced models of broilers' houses, under different types of roofing materials

Esta pesquisa foi conduzida com o objetivo de avaliar diferentes tipos de coberturas em instalações para aves, por meio do Índice de Temperatura de Globo Negro e Umidade (ITGU), Carga Térmica de Radiação (CTR) e Entalpia (H). O experimento foi conduzido na Universidade Estadual de Goiás, entre os meses de abril e maio de 2011, sendo composto por cinco tratamentos (coberturas): CA -Telha de cimento-amianto; BA -Telha de bambu; BAP -Telha de bambu pintada de branco; FB -Telha de fibra vegetal e betume; FBP -Telha de fibra vegetal e betume pintada de branco, com 15 repetições, sendo as repetições os dias de medição. Dentre os horários estudados, o considerado menos confortável foi às 14h, sendo que a cobertura de fibra vegetal e betume foi a que apresentou maior valor de ITGU (84,1) quando comparada às demais coberturas, caracterizando uma situação de menor conforto térmico, não sendo observada diferença para CTR e H entre os tratamentos na região estudada.

Potential force of infection of human rabies transmitted by vampire bats in the Amazonian region of Brazil

Human rabies tansmitted by bats has acquired greater epidemiologic relevance in various Latin American countries, just when cases transmitted by dogs have decreased. Concern has been heightened by reports of increased rates of bats biting humans in villlages in the Amazonian region of Brazil. The aim of the present work was to estimate the potential force of infection (per capita rate at which susceptible individuals acquire infection) of human rabies transmitted by the common vampire bat if the rabies virus were to be introduced to a colony of bats close to a village with a high rate of human bites. The potential force of infection could be then used to anticipate the size of a rabies outbreak in control programs. We present an estimator of potential incidence, adapted from models for malaria. To obtain some of the parameters for the equation, a cross-sectional survey was conducted in Mina Nova, a village of gold prospectors in the Amazonian region of Brazil with high rates of bates biting humans. Bats were captured near dwellings and sent to the Rabies Diagnostic Laboratory at the Center for Control of Zoonoses (São Paulo, Brazil) to be examined. To estimate the force of infection, a hypothetical rabies outbreak among bats was simulated using the actual data obtained in the study area. of 129 people interviewed, 23.33% had been attacked by a vampire bat during the year prior to the study, with an average of 2.8 bites per attacked person. Males (29.41%) were attacked more often than females (11.36%); also, adults (29.35%) were attacked more often than children (8.33%). None of the 12 bats captured in Mina Nova tested positive for rabies, but the force of infection for a hypothetical outbreak was estimated to be 0.0096 per person per year. This risk represents 0.96 cases per 100 area residents, giving an incidence of 1.54 cases of bat-transimtted buman rabies per year in the village of Mina Nova (160 inhabitants). The estimated risk is comparable with what has been observed in similar Brazilian villages.

A BEM formulation based on Reissner's theory to perform simple bending analysis of plates reinforced by rectangular beams

In this work, the plate bending formulation of the boundary element method (BEM), based on the Reissner's hypothesis, is extended to the analysis of plates reinforced by rectangular beams. This composed structure is modelled by a zoned plate, being the beams represented by narrow sub-regions with larger thickness. The integral equations are derived by applying the weighted residual method to each sub-region, and summing them to get the equation for the whole plate. Equilibrium and compatibility conditions are automatically imposed by the integral equations, which treat this composed structure as a single body. In order to decrease the number of degrees of freedom, some approximations are considered for both displacements and tractions along the beam width. The accuracy of the proposed model is illustrated by simple examples whose exact solution are known as well as by more complex examples whose numerical results are compared with a well-known finite element code.

Observed supersymmetry of hadrons and the tachyonless string models

The experimental mesonic density of states ρmeson(m)≃ρbaryon(m) from 0.9 to 1.3 GeV. In this region the ρmeson fits the ρ(m) deduced for it from discrete bag model states. Beyond 1.3 GeV one can expect exotic mesons. If ρmeson is replaced by the baryon density (as suggested by string model studies [D. Kutasov and N. Seiberg, Nucl. Phys. B 358 (1991) 600; P.G.O. Freund and J.L. Rosner, Phys. Rev. Lett. 68 (1992) 765]), agreement with theory is obtained up to 1.7 GeV. Beyond 1.7 GeV exotic baryons may be expected.

A steady-state model for heat pipes of circular or rectangular cross-sections

The objective of this paper is to present a generalized analytical-numerical model of the internal flow in heat pipes. The model formulation is based on two-dimensional formulation of the energy and momentum equations in the vapour and liquid regions and also in the metallic tube. The numerical solution of the model is obtained by using the descretization scheme LOAD and the SIMPLE numerical code. The flow fields, as well as the pressure fields, for different geometries were obtained and discussed. Copyright © 1996 Elsevier Science Ltd.

Semi-automatic modeling of buildings from digital surface models

Semi-automatic building detection and extraction is a topic of growing interest due to its potential application in such areas as cadastral information systems, cartographic revision, and GIS. One of the existing strategies for building extraction is to use a digital surface model (DSM) represented by a cloud of known points on a visible surface, and comprising features such as trees or buildings. Conventional surface modeling using stereo-matching techniques has its drawbacks, the most obvious being the effect of building height on perspective, shadows, and occlusions. The laser scanner, a recently developed technological tool, can collect accurate DSMs with high spatial frequency. This paper presents a methodology for semi-automatic modeling of buildings which combines a region-growing algorithm with line-detection methods applied over the DSM.

Pressure field in the cathode-anode region of a high-power klystron amplifier

The pressure field of a high-power klystron amplifier in the cathode and anode region was investigated. The investigation was performed using a 1.3 GHz, 100 A and 240 kV high-power klystron with five reentrant coaxial cavities, assembled in cylindrical drift tube 1.2 m long. The diffusion equation in mathematical model was also solved by using a 3-D finite element method code, in order to obtain pressure profile in region of interest. The results show that density profile of molecules between cathode-anode region was determined, where cathode pressure is approximately 10% higher than anode pressure.

Determination of resonant frequencies of triangular and rectangular microstrip antennas, using artificial neural networks

This paper presents models that can be used in the design of microstrip antennas for mobile communications. The antennas can be triangular or rectangular. The presented models are compared with deterministic and empirical models based on artificial neural networks (ANN) presented in the literature. The models are based on Perceptron Multilayer (PML) and Radial Basis Function (RBF) ANN. RBF based models presented the best results. Also, the models can be embedded in CAD systems, in order to design microstrip antennas for mobile communications.

Heteropicnotic chromatin and nucleolar activity in meiosis and spermiogenesis of Limnogonus aduncus (Heteroptera, Gerridae): a stained nucleolar organizing region that can serve as a model for studying chromosome behavior.

Males of Limnogonus aduncus were found to have the sex chromosome system X0 and chromosome number 2n = 23 (22A + X0). Testis cells were stained with lacto-acetic orcein and silver nitrate so that changes in the morphology and degree of staining of the heteropicnotic chromatin and the nucleolar material could be observed during meiosis and spermiogenesis. These structures share the same nuclear position and could be seen until almost the end of spermiogenesis. A chromosome region stained with silver nitrate was indicative of a nucleolar organizing region (NOR), which is rarely detected in Heteroptera with this technique. The NOR is located at one end of a single member of an autosome pair. The finding of this stained region enabled us to observe that the telomeric association of sister chromatids that characterizes the Heteroptera does not include the chromosome ends, where NORs are located; we also observed in anaphase that the chromosome end through which it is pulled to the pole is the one containing the NOR. Another observation was that the single nucleolar body present in the cells at anaphase never goes to the cell pole that does not receive the NOR. We conclude that L. aduncus is a good model for cytogenetic studies involving nucleolar activity and also may be useful for studying the mechanisms of activation and inactivation of kinetic activity at the chromosome ends. Although the chromosomes of Heteroptera are known to be holocentric, whether kinetic activity is restricted to one or involves both chromosome ends is still not well understood.

New contributions to the determination of resonance frequencies of rectangular microstrip antennas by neural networks

This paper uses artificial neural networks (ANN) to compute the resonance frequencies of rectangular microstrip antennas (MSA), used in mobile communications. Perceptron Multi-layers (PML) networks were used, with the Quasi-Newton method proposed by Broyden, Fletcher, Goldfarb and Shanno (BFGS). Due to the nature of the problem, two hundred and fifty networks were trained, and the resonance frequency for each test antenna was calculated by statistical methods. The estimate resonance frequencies for six test antennas were compared with others results obtained by deterministic and ANN based empirical models from the literature, and presented a better agreement with the experimental values.

Application of landsat images for quantifying the energy balance under conditions of land use changes in the semi-arid region of Brazil

In the Nilo Coelho irrigation scheme, Brazil, the natural vegetation has been replaced by irrigated agriculture, bringing importance for the quantification of the effects on the energy exchanges between the mixed vegetated surfaces and the lower atmosphere. Landsat satellite images and agro-meteorological stations from 1992 to 2011 were used together, for modelling these exchanges. Surface albedo (α0), NDVI and surface temperature (T0) were the basic remote sensing retrieving parameters necessary to calculate the latent heat flux (λE) and the surface resistance to evapotranspiration (rs) on a large scale. The daily net radiation (Rn) was obtained from α0, air temperature (Ta) and short-wave transmissivity (τsw) throughout the slob equation, allowing the quantification of the daily sensible heat flux (H) by residual in the energy balance equation. With a threshold value for rs, it was possible to separate the energy fluxes from crops and natural vegetation. The averaged fractions of Rn partitioned as H and λE, were in average 39 and 67%, respectively. It was observed an increase of the energy used for the evapotranspiration process inside irrigated areas from 51% in 1992 to 80% in 2011, with the ratio λE/Rn presenting an increase of 3 % per year. The tools and models applied in the current research, can subsidize the monitoring of the coupled climate and land use changes effects in irrigation perimeters, being valuable when aiming the sustainability of the irrigated agriculture in the future, avoiding conflicts among different water users. © 2012 SPIE.

Estudo da distribuição das tensões provenientes de molas helicoidais utilizadas na verticalização de molares pelo método da Fotoelasticidade de transmissão plana

Pós-graduação em Odontologia - FOA

Growth curve of female collared peccaries (Pecari tajacu) raised in captivity in the Brazilian Amazon Region

Com o objetivo de ajustar modelos não-lineares, foram utilizados registros mensais do peso de 10 fêmeas de cateto (Pecari tajacu) coletados durante dois anos, no criatório do campo experimental Álvaro Adolfo da Embrapa Amazônia Oriental, Belém, PA. Utilizaram-se os modelos de Von Bertalanffy, Brody, Gompertz e Logístico. Os parâmetros foram estimados usando o procedimento NLIN do aplicativo SAS. Os critérios utilizados para verificar o ajuste dos modelos foram: desvio padrão assintótico (ASD); coeficiente de determinação (R²); desvio médio absoluto dos resíduos (ARD) e o índice assintótico (AR). Os modelos Brody e Logístico estimaram, respectivamente, o maior (19,44kg) e o menor (19,18kg) peso assintótico (A), caracterizando a menor (0,0064kg/dia) e a maior (0,0113kg/dia) taxa de maturação (K), haja vista a natureza antagônica entre estes parâmetros, comprovada pela correlação fenotípica variando entre -0,75 à -0,47. O modelo Brody estimou o menor valor para o ARD, fator limitante para caracterizar o menor valor para o AR por este modelo. Considerando o AR, o modelo Brody apresentou o melhor ajuste, contudo, pelos valores encontrados, os demais modelos também apresentaram ajuste adequando aos dados ponderais da referida espécie/sexo. Com base no AR adotado neste trabalho, recomenda-se o modelo Brody para ajustar a curva de crescimento de fêmeas de cateto (Pecari tajacu). Em razão dos valores estimados, sobretudo, para a K, essa característica pode ser incluída em um índice de seleção. Contudo, estudos com grupos mais representativos e criados em outras condições se faz oportuno.

Environmental fragility evaluation and guidelines for environmental zoning: a study case on Ibiuna (the Southeastern Brazilian region)

Environmental fragility models are important decision tools for policy makers as they help quantify environmental sensitivity and understand the relationship between human activities and environmental quality. The objective of this study was to evaluate three different environmental fragility models within the Brazilian rainforest region and to use the results to develop environmental zone classes. Two rural river basins located in Ibiuna, Sao Paulo state, Brazil, were studied. Input variables, including slope class, relief dissection rate, soil class, lithology, land cover, and climate data, were used to compute environmental fragility classes using three standard models. The model outputs were evaluated on their ability to accurately predict the most sensitive and least sensitive areas. The best models for each region were used to derive environmental zoning maps, including restoration priorities, best regions for agriculture, and areas with high needs for soil management. These maps will help support land use strategies for environmental restoration. This study provides insight into territorial ordering and management of environmental services with a regional perspective.