Quality of transmission estimation in WDM and elastic optical networks accounting for space-spectrum dependencies

We develop a framework for estimating the quality of transmission (QoT) of a new lightpath before it is established, as well as for calculating the expected degradation it will cause to existing lightpaths. The framework correlates the QoT metrics of established lightpaths, which are readily available from coherent optical receivers that can be extended to serve as optical performance monitors. Past similar studies used only space (routing) information and thus neglected spectrum, while they focused on oldgeneration noncoherent networks. The proposed framework accounts for correlation in both the space and spectrum domains and can be applied to both fixed-grid wavelength division multiplexing (WDM) and elastic optical networks. It is based on a graph transformation that exposes and models the interference between spectrum-neighboring channels. Our results indicate that our QoT estimates are very close to the actual performance data, that is, to having perfect knowledge of the physical layer. The proposed estimation framework is shown to provide up to 4 × 10-2 lower pre-forward error correction bit error ratio (BER) compared to theworst-case interference scenario,which overestimates the BER. The higher accuracy can be harvested when lightpaths are provisioned with low margins; our results showed up to 47% reduction in required regenerators, a substantial savings in equipment cost.

Essays on Energy Economics and Industrial Organization

The dissertation consists of three chapters related to the low-price guarantee marketing strategy and energy efficiency analysis. The low-price guarantee is a marketing strategy in which firms promise to charge consumers the lowest price among their competitors. Chapter 1 addresses the research question "Does a Low-Price Guarantee Induce Lower Prices'' by looking into the retail gasoline industry in Quebec where there was a major branded firm which started a low-price guarantee back in 1996. Chapter 2 does a consumer welfare analysis of low-price guarantees to drive police indications and offers a new explanation of the firms' incentives to adopt a low-price guarantee. Chapter 3 develops the energy performance indicators (EPIs) to measure energy efficiency of the manufacturing plants in pulp, paper and paperboard industry.

Chapter 1 revisits the traditional view that a low-price guarantee results in higher prices by facilitating collusion. Using accurate market definitions and station-level data from the retail gasoline industry in Quebec, I conducted a descriptive analysis based on stations and price zones to compare the price and sales movement before and after the guarantee was adopted. I find that, contrary to the traditional view, the stores that offered the guarantee significantly decreased their prices and increased their sales. I also build a difference-in-difference model to quantify the decrease in posted price of the stores that offered the guarantee to be 0.7 cents per liter. While this change is significant, I do not find the response in comeptitors' prices to be significant. The sales of the stores that offered the guarantee increased significantly while the competitors' sales decreased significantly. However, the significance vanishes if I use the station clustered standard errors. Comparing my observations and the predictions of different theories of modeling low-price guarantees, I conclude the empirical evidence here supports that the low-price guarantee is a simple commitment device and induces lower prices.

Chapter 2 conducts a consumer welfare analysis of low-price guarantees to address the antitrust concerns and potential regulations from the government; explains the firms' potential incentives to adopt a low-price guarantee. Using station-level data from the retail gasoline industry in Quebec, I estimated consumers' demand of gasoline by a structural model with spatial competition incorporating the low-price guarantee as a commitment device, which allows firms to pre-commit to charge the lowest price among their competitors. The counterfactual analysis under the Bertrand competition setting shows that the stores that offered the guarantee attracted a lot more consumers and decreased their posted price by 0.6 cents per liter. Although the matching stores suffered a decrease in profits from gasoline sales, they are incentivized to adopt the low-price guarantee to attract more consumers to visit the store likely increasing profits at attached convenience stores. Firms have strong incentives to adopt a low-price guarantee on the product that their consumers are most price-sensitive about, while earning a profit from the products that are not covered in the guarantee. I estimate that consumers earn about 0.3% more surplus when the low-price guarantee is in place, which suggests that the authorities should not be concerned and regulate low-price guarantees. In Appendix B, I also propose an empirical model to look into how low-price guarantees would change consumer search behavior and whether consumer search plays an important role in estimating consumer surplus accurately.

Chapter 3, joint with Gale Boyd, describes work with the pulp, paper, and paperboard (PP&PB) industry to provide a plant-level indicator of energy efficiency for facilities that produce various types of paper products in the United States. Organizations that implement strategic energy management programs undertake a set of activities that, if carried out properly, have the potential to deliver sustained energy savings. Energy performance benchmarking is a key activity of strategic energy management and one way to enable companies to set energy efficiency targets for manufacturing facilities. The opportunity to assess plant energy performance through a comparison with similar plants in its industry is a highly desirable and strategic method of benchmarking for industrial energy managers. However, access to energy performance data for conducting industry benchmarking is usually unavailable to most industrial energy managers. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR program, seeks to overcome this barrier through the development of manufacturing sector-based plant energy performance indicators (EPIs) that encourage U.S. industries to use energy more efficiently. In the development of the energy performance indicator tools, consideration is given to the role that performance-based indicators play in motivating change; the steps necessary for indicator development, from interacting with an industry in securing adequate data for the indicator; and actual application and use of an indicator when complete. How indicators are employed in EPA’s efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The chapter describes the data and statistical methods used to construct the EPI for plants within selected segments of the pulp, paper, and paperboard industry: specifically pulp mills and integrated paper & paperboard mills. The individual equations are presented, as are the instructions for using those equations as implemented in an associated Microsoft Excel-based spreadsheet tool.

Design and implementation of generalized topologies of time-interleaved variable bandpass Σ−Δ modulators

In this thesis, novel analog-to-digital and digital-to-analog generalized time-interleaved variable bandpass sigma-delta modulators are designed, analysed, evaluated and implemented that are suitable for high performance data conversion for a broad-spectrum of applications. These generalized time-interleaved variable bandpass sigma-delta modulators can perform noise-shaping for any centre frequency from DC to Nyquist. The proposed topologies are well-suited for Butterworth, Chebyshev, inverse-Chebyshev and elliptical filters, where designers have the flexibility of specifying the centre frequency, bandwidth as well as the passband and stopband attenuation parameters. The application of the time-interleaving approach, in combination with these bandpass loop-filters, not only overcomes the limitations that are associated with conventional and mid-band resonator-based bandpass sigma-delta modulators, but also offers an elegant means to increase the conversion bandwidth, thereby relaxing the need to use faster or higher-order sigma-delta modulators. A step-by-step design technique has been developed for the design of time-interleaved variable bandpass sigma-delta modulators. Using this technique, an assortment of lower- and higher-order single- and multi-path generalized A/D variable bandpass sigma-delta modulators were designed, evaluated and compared in terms of their signal-to-noise ratios, hardware complexity, stability, tonality and sensitivity for ideal and non-ideal topologies. Extensive behavioural-level simulations verified that one of the proposed topologies not only used fewer coefficients but also exhibited greater robustness to non-idealties. Furthermore, second-, fourth- and sixth-order single- and multi-path digital variable bandpass digital sigma-delta modulators are designed using this technique. The mathematical modelling and evaluation of tones caused by the finite wordlengths of these digital multi-path sigmadelta modulators, when excited by sinusoidal input signals, are also derived from first principles and verified using simulation and experimental results. The fourth-order digital variable-band sigma-delta modulator topologies are implemented in VHDL and synthesized on Xilinx® SpartanTM-3 Development Kit using fixed-point arithmetic. Circuit outputs were taken via RS232 connection provided on the FPGA board and evaluated using MATLAB routines developed by the author. These routines included the decimation process as well. The experiments undertaken by the author further validated the design methodology presented in the work. In addition, a novel tunable and reconfigurable second-order variable bandpass sigma-delta modulator has been designed and evaluated at the behavioural-level. This topology offers a flexible set of choices for designers and can operate either in single- or dual-mode enabling multi-band implementations on a single digital variable bandpass sigma-delta modulator. This work is also supported by a novel user-friendly design and evaluation tool that has been developed in MATLAB/Simulink that can speed-up the design, evaluation and comparison of analog and digital single-stage and time-interleaved variable bandpass sigma-delta modulators. This tool enables the user to specify the conversion type, topology, loop-filter type, path number and oversampling ratio.

A Computer Model of Drafting Effects on Collective Behavior in Elite 10,000 m Runners

Purpose Drafting in cycling influences collective behaviour of pelotons. Whilst evidence for collective behaviour in competitive running events exists, it is not clear if this results from energetic savings conferred by drafting. This study modelled the effects of drafting on behavior in elite 10,000 m runners. Methods Using performance data from a men’s elite 10,000 m track running event, computer simulations were constructed using Netlogo 5.1 to test the effects of three different drafting quantities on collective behaviour: no drafting, drafting to 3m behind with up to ~8% energy savings (a realistic running draft); and drafting up to 3m behind with up to 38% energy savings (a realistic cycling draft). Three measures of collective behaviour were analysed in each condition; mean speed, mean group stretch (distance between first and last placed runner), and Runner Convergence Ratio (RCR) which represents the degree of drafting benefit obtained by the follower in a pair of coupled runners. Results Mean speeds were 6.32±0.28m.s-1, 5.57±0.18 m.s-1, and 5.51±0.13 m.s-1 in the cycling draft, runner draft, and no draft conditions respectively (all P<0.001). RCR was lower in the cycling draft condition, but did not differ between the other two. Mean stretch did not differ between conditions. Conclusions Collective behaviours observed in running events cannot be fully explained through energetic savings conferred by realistic drafting benefits. They may therefore result from other, possibly psychological, processes. The benefits or otherwise of engaging in such behavior are, as yet, unclear.

Wearing Eye Tracking Technology During Batting Practice: Assessing the Experiences of Professional Baseball Athletes

Utilizing wearable technology in sport allows for the collection of motor behavior data during task engagement. This data can be assessed in real-time or retrospectively. Although enriching the scope of performance data, the consequences of wearable technology on the athlete-user, specifically the cognitive effects, has not been fully investigated, hence the purpose of this study. This qualitative study examines the cognitions of 57 professional baseball players who wore eye tracking technology whilst engaged in batting practice. Their verbal self-reports were framed by temporal context: before-during-after task. Three themes emerged during the pre-task segment: social appearance anxiety, claimed self-handicapping, and curiosity. During the task of batting, verbal behavior contained motivational and instructional overt self-talk while claimed self-handicapping was sustained. The final, post-performance segment was marked by the re-emergence of curiosity from the pre-task period as well as self-evaluation/appraisal. Given the participants were professional athletes, their performance has greater career implications than amateur competitors. Nonetheless, the verbal behavior elicited while wearing eye tracking technology indicates an awareness of the equipment by the user. This study found cognitive effects from wearable technology; more research is required to under-stand the scope and nature of those effects on cognitive and motor behaviors.

Validation of Gyratory Mix Design in Iowa, TR-667, 2016

The design number of gyrations (Ndesign) introduced by the Strategic Highway Research Program (SHRP) and used in the Superior Performing Asphalt Pavement (Superpave) mix design method has been commonly used in flexible pavement design throughout the US since 1996. Ndesign, also known as the compaction effort, is used to simulate field compaction during construction and has been reported to produce air voids that are unable to reach ultimate pavement density within the initial 2 to 3 years post-construction, potentially having an adverse impact on long-term performance. Other state transportation agencies have conducted studies validating the Ndesign for their specific regions, which resulted in modifications of the gyration effort for the various traffic levels. Validating this relationship for Iowa asphalt mix designs will lead to better correlations between mix design target voids, field voids, and performance. A comprehensive analysis of current Ndesign levels investigated the current levels with existing mixes and pavements and developed initial asphalt mix design recommendations that identify an optimum Ndesign through the use of performance data tests.

Utilização de diferentes fontes de carbono no cultivo do camarão litopenaeus vannamei em sistemas com bioflocos

A tecnologia do sistema de cultivo com bioflocos (BFT) permite a intensificação da densidade de estocagem, bem como o aumento da produtividade no qual exige esforços no manejo para a manutenção de qualidade de água. No entanto, um dos problemas é a liberação de nitrogênio através de alimento não consumidos, juntamente com as excretas dos organismos cultivados, principalmente na forma de amônia total. A adição de fontes de carbono orgânico é uma alternativa na redução de amônia tornando possível a conversão deste composto em proteína bacteriana, sendo disponível como alimento suplementar no ambiente de cultivo. Portanto foram testadas fontes de carbono como o melaço de cana-de-açúcar, dextrose e farelo de arroz no cultivo do camarão L. vannamei em sistemas BFT, avaliando a redução da concentração do nitrogênio amoniacal total em experimentos nas fases de berçário e engorda, bem como a análise de desempenho zootécnico dos animais. Os experimentos foram realizados utilizando caixas com volume útil de 800 L. O experimento berçário teve a duração de 35 dias, com densidade de estocagem de 1200 camarões m- ² e peso médio de 0,024±0,01 g. As fontes de carbono melaço de cana-de-açúcar (M) e farelo de arroz (F) foram combinadas em diferentes percentuais. No experimento engorda foi utilizada densidade de estocagem de 300 camarões m- ², peso médio de 4,09±0,51 g, durante 70 dias. Os tratamentos foram distinguidos pelas fontes de carbono dextrose e farelo de arroz. No experimento berçário a concentração da amônia foi significativamente menor (p<0,05) com o uso do melaço. O nitrito acumulou até o final do experimento, mas devido ao curto período experimental não interferiu nos índices de desempenho zootécnico, nos quais não apresentaram diferenças pelo uso das fontes de carbono. No experimento engorda, com o uso da dextrose, a concentração de amônia foi significativamente menor (p<0,05). Apesar de elevadas concentrações de nitrito, as sobrevivências foram similares e acima de 80%. Dados zootécnicos como peso final, ganho de peso semanal, conversão alimentar aparente e produtividade foram significativamente melhores (p<0,05) no tratamento farelo de arroz. Em ambos os experimentos as fontes de carbono de degradação rápida, como o melaço e a dextrose foram mais eficientes na redução de amônia. A degradação rápida destas fontes podem ter disponibilizado maiores teores de carbono como substrato para as bactérias heterotróficas metabolizarem a amônia, melhorando a qualidade da água.

Desenvolvimento ponderal de bubalinos da raça Murrah criados em pastagem de Brachiaria brizantha no Centro-Oeste do Estado de São Paulo, Brasil

Foram analisados os dados de desempenho ponderal de bubalinos Murrah do Sistema de Produção de Leite da Universidade Estadual Paulista, Faculdade de Medicina Veterinária e Zootecnia, campus de Botucatu. Os pesos foram corrigidos às diversas idades-padrão e o modelo incluiu os efeitos de sexo (S), mês (M) e ano (A) de nascimento, classe de idade da búfala ao parto (C) e as interações S x M, S x A, S x C e M x A. As médias ajustadas e respectivos erros-padrão estimados para as características estudadas foram: Peso ao Nascer (PN): 37,71 ± 8,25kg; Peso aos 120 dias (P120): 102,08 ± 16,27kg; Peso aos 240 dias (P240): 169,84 ± 22,83kg; Peso aos 365 dias (P365): 250,59 ± 25,12kg; Peso aos 550 dias (P550): 326,13 ± 39,27kg e Peso aos 730 dias (P730): 389,80 ± 31,26kg. O efeito de sexo (S) foi significativo somente para PN e P365, sendo que machos tenderam a nascer mais pesados que fêmeas. O mês de nascimento (M) exerceu efeito sobre o PN, P120 e P730 sendo que animais nascidos em maio foram os mais pesados ao nascer, enquanto os nascidos em janeiro e maio, foram os mais pesados aos 120 e 730 dias, respectivamente. O efeito de ano de foi significativo sobre o PN, P120, P240 e P730. Os filhos de búfalas das classes de idade 1 (3 anos ou menos) e da classe 6 (10,11 e 12 anos) foram os mais leves e mais pesados ao nascer, respectivamente. O fato de a classe de idade da búfala não exercer efeito sobre os P365, P550 e P730 sugere que, em rebanhos comerciais possa ser feita a substituição de búfalas não gestantes por novilhas prenhes, apesar de esta prática reduzir a média de idade do rebanho de cria. Bubalinos da raça Murrah oriundos de rebanhos leiteiros podem ser utilizados para a produção de carne.

Diseño de un sistema de control de costos para el proceso de construcción de vivienda popular

El objetivo,para el desarrollo de este proyecto de graduación, es establecer un control de costos en las viviendas de interés social que se desarrollan en el Ecuador, a nivel de proyectos, ejecutados por empresas constructoras o contratistas. Se tomarán datos de la ejecución en campo de viviendas de 42 m2 de construcción, en la comunidad de Macas provincia del Cañar. Se verificarán materiales reales, rendimiento de mano de obra reales y rendimientos de equipo y transporte reales, con el afán de determinar el costo real de la obra. Todos estos datos se registrarán en el modelo desarrollado con lo que se comparará lo ejecutado contra lo programado. En el caso de existir un desfase entre estos dos parámetros, el modelo proyectará un nuevo presupuesto, asegurándose de que los gastos no excedan el financiamiento autorizado para el proyecto. El modelo almacenará datos de rendimientos de mano de obra, precios de materiales, equipos y transporte. Esto permitirá plantear presupuestos para futuros proyectos con precios cada vez más cercanos a los reales en la ejecución del proyecto, ayudando, de manera permanente, a instituciones gubernamentales profesionales de la construcción dedicadas a la proyección de viviendas.

Assessing public spending efficiency in 20 OECD countries

Mestrado em Economia Monetária e Financeira

Assessing public spending efficiency in 20 OECD countries

This study follows the framework of Afonso, Schuknecht, and Tanzi (2005), aiming to look at the public expenditure of 20 OECD countries for the period 2009-2013, from the per- spective of efficiency and assess if these developed countries are performing efficiently compared to each other. Public Sector Performance (PSP) and Public Sector Efficiency (PSE) indicators were constructed and Data Envelopment Analysis was conducted. The results show that the only country that performed on the efficiency frontier is Switzerland. The average input-oriented efficiency score is equal to 0.732. That is, on average countries could have reduced the level of public expenditure by 26.8% and still achieved the same level of public performance. The average output-oriented efficiency score is 0.769 denoting that on average the sample countries could have increased their performance by 23.1% by employing the same level of public expenditure.

Managing pressure: patterns of appraisals and coping strategies of non-elite and elite athletes during competition

The purpose of this study was to compare moment-to-moment appraisals and coping strategies of 4 non-elite and 2 elite male trap shooters during competitions and in particular during periods of competition perceived as critical to performance. Appraisals and coping patterns of trap shooters were captured via verbal reports of thinking provided between sets of shots during major competitions. Verbal reports were coded according to an appraisal and coping typology. Coded data as well as shooting performance data were subjected to a sequential analysis of probabilities of pairs of events. Fewer reports of negative appraisals (NEGAs) and more frequent reports of problem-focused coping (PFC) were observed among both elite athletes compared to non-elite athletes. After making a NEGA, non-elite shooters often progressed to the next target without attempting to cope, whereas elite shooters used both PFC and emotion-focused coping (EFC) before proceeding to the next target. After missing a target, the non-elite athletes used more EFC than expected. These results indicate that elite athletes are more likely to cope with NEGAs than non-elite athletes using a wider variety of coping strategies. Athletes might benefit from increased awareness of the potentially detrimental impact of NEGAs on performance and by integrating coping strategies within preparatory routines.

The Ribatejano pig – rebirth of a local pig population? First results

A former cross between Alentejano (AL) and Bísaro (BI) breeds, called Ribatejano pig (RI), was quite spread in Ribatejo region until half of the last century and was raised in both borders of Tagus River. Besides the renewed interest of this cross nowadays, no performance data is available regarding the RI (ALxBI and BIxAL) animals or their products, which were studied in the frame of project TREASURE1. In order to assess the productive performance of the RI pig, castrated AL, BI, ALxBI and BIxAL pigs (10 from each genotype) raised in traditional free-range system and fed commercial diets ad libitum, were slaughtered at ~65kg LW.

Report : school survey to collect data on material performance

A survey of a number of schools in a number of different climates was carried out to determine the condition of building components of interest in the project. Schools in Melbourne, the Victorian Surf Coast, Brisbane, Townsville and the Sunshine Coast were inspected. A rating system was devised to categorise the components and the results collated in tables. Analysis of the data (where sufficient examples permitted) resulted in formulae to predict the service of the components and a database was derived.

Performance pressure an empirical analysis using world and Euro cups data

There is a notable shortage of empirical research directed at measuring the magnitude and direction of stress effects on performance in a controlled environment. One reason for this is the inherent difficulties in identifying and isolating direct performance measures for individuals. Additionally most traditional work environments contain a multitude of exogenous factors impacting individual performance, but controlling for all such factors is generally unfeasible (omitted variable bias). Moreover, instead of asking individuals about their self-reported stress levels we observe workers' behavior in situations that can be classified as stressful. For this reason we have stepped outside the traditional workplace in an attempt to gain greater controllability of these factors using the sports environment as our experimental space. We empirically investigate the relationship between stress and performance, in an extreme pressure situation (football penalty kicks) in a winner take all sporting environment (FIFA World Cup and UEFA European Cup competitions). Specifically, we examine all the penalty shootouts between 1976 and 2008 covering in total 16 events. The results indicate that extreme stressors can have a positive or negative impact on Individuals' performance. On the other hand, more commonly experienced stressors do not affect professionals' performances.