Lithographic Technology Students in the Lab

Students are from the Lithography Department of the New York Trade School are shown working in a lab. Black and white photograph that has some writing along the outer edge.

Alphanumeric LCD infrared control via computer’s parallel port

The present work will explain a method to achieve a remote controlled (via IR LED) alphanumeric Liquid Crystal Display. In modern times, the remote access of different devices has become quite popular, therefore, the aim of this project is to provide a useful tool that will integrate common and easy to access devices. The system includes a C language based user interface, an assembly language code for the AT89C51ED2 microcontroller instructions and some digital electronic circuits needed for the driving and control of both the LCD and the infrared communication, as well as the PC with a parallel port. The interaction of all the devices provides a whole system that can be helpful in different applications, or it can be separated into each one of its different stages to take the best advantage as possible.

TCA Evaluation : Lab Measurements, Modelling and System Simulations

The study reported here is part of a large project for evaluation of the Thermo-Chemical Accumulator (TCA), a technology under development by the Swedish company ClimateWell AB. The studies concentrate on the use of the technology for comfort cooling. This report concentrates on measurements in the laboratory, modelling and system simulation. The TCA is a three-phase absorption heat pump that stores energy in the form of crystallised salt, in this case Lithium Chloride (LiCl) with water being the other substance. The process requires vacuum conditions as with standard absorption chillers using LiBr/water. Measurements were carried out in the laboratories at the Solar Energy Research Center SERC, at Högskolan Dalarna as well as at ClimateWell AB. The measurements at SERC were performed on a prototype version 7:1 and showed that this prototype had several problems resulting in poor and unreliable performance. The main results were that: there was significant corrosion leading to non-condensable gases that in turn caused very poor performance; unwanted crystallisation caused blockages as well as inconsistent behaviour; poor wetting of the heat exchangers resulted in relatively high temperature drops there. A measured thermal COP for cooling of 0.46 was found, which is significantly lower than the theoretical value. These findings resulted in a thorough redesign for the new prototype, called ClimateWell 10 (CW10), which was tested briefly by the authors at ClimateWell. The data collected here was not large, but enough to show that the machine worked consistently with no noticeable vacuum problems. It was also sufficient for identifying the main parameters in a simulation model developed for the TRNSYS simulation environment, but not enough to verify the model properly. This model was shown to be able to simulate the dynamic as well as static performance of the CW10, and was then used in a series of system simulations. A single system model was developed as the basis of the system simulations, consisting of a CW10 machine, 30 m2 flat plate solar collectors with backup boiler and an office with a design cooling load in Stockholm of 50 W/m2, resulting in a 7.5 kW design load for the 150 m2 floor area. Two base cases were defined based on this: one for Stockholm using a dry cooler with design cooling rate of 30 kW; one for Madrid with a cooling tower with design cooling rate of 34 kW. A number of parametric studies were performed based on these two base cases. These showed that the temperature lift is a limiting factor for cooling for higher ambient temperatures and for charging with fixed temperature source such as district heating. The simulated evacuated tube collector performs only marginally better than a good flat plate collector if considering the gross area, the margin being greater for larger solar fractions. For 30 m2 collector a solar faction of 49% and 67% were achieved for the Stockholm and Madrid base cases respectively. The average annual efficiency of the collector in Stockholm (12%) was much lower than that in Madrid (19%). The thermal COP was simulated to be approximately 0.70, but has not been possible to verify with measured data. The annual electrical COP was shown to be very dependent on the cooling load as a large proportion of electrical use is for components that are permanently on. For the cooling loads studied, the annual electrical COP ranged from 2.2 for a 2000 kWh cooling load to 18.0 for a 21000 kWh cooling load. There is however a potential to reduce the electricity consumption in the machine, which would improve these figures significantly. It was shown that a cooling tower is necessary for the Madrid climate, whereas a dry cooler is sufficient for Stockholm although a cooling tower does improve performance. The simulation study was very shallow and has shown a number of areas that are important to study in more depth. One such area is advanced control strategy, which is necessary to mitigate the weakness of the technology (low temperature lift for cooling) and to optimally use its strength (storage).

Development of a ESES Solar Thermal Lab on Full Scale System

The main aim of this project is to develop an ESES lab on a full scale system. The solar combisystem used is available most of the time and is only used twice a year to carry out some technical courses. At the moment, there are no other laboratories about combisystems. The experiments were designed in a way to use the system to the most in order to help the students apply the theoretical knowledge in the solar thermal course as well as make them more familiar with solar systems components. The method adopted to reach this aim is to carry out several test sequences on the system, in order to help formulating at the end some educating experiments. A few tests were carried out at the beginning of the project just for the sake of understanding the system and figuring out if any additional measuring equipment is required. The level of these tests sequences was varying from a simple energy draw off or collector loop controller respond tests to more complicated tests, such as the use of the ‘collector’ heater to simulate the solar collector effect on the system. The tests results were compared and verified with the theoretical data wherever relevant. The results of the experiment about the use of the ‘collector’ heater instead of the collector were positively acceptable. Finally, the Lab guide was developed based on the results of these experiments and also the experience gotten while conducting them. The lab work covers the theories related to solar systems in general and combisystems in particular. 

Eliciting children's recall of events: how do computers compare with humans?

This study investigated the usefulness of an interactive computer program in eliciting children's reports about an event. Fifty-four 5–6- and fifty-nine  7–8-year old children participated in an event with their regular class teacher which involved several activities and a mildly negative secret. Four days and again 14 days later, the children were interviewed individually by computer (alone) or by a human interviewer. The computer program incorporated animation and audio whereby an animated figure asked the questions and the children were required to provide a verbal response. The accuracy and detail of the children’s reports was similar across the interview conditions. The children were more willing to review their answers with the computer than the adult interviewer. However, responses to the computer were less consistent across the interviews, and the children were less willing to disclose the secret in the second interview to the computer compared with the human interviewer. Overall, the computer revealed little benefit in eliciting children’s recall of the event over the standard face-to-face interview.

Teachers and computers for secondary mathematics

In the first stage of a three-year study in which the effects of using computers for the teaching and learning of mathematics are being explored, a questionnaire was developed and administered to teachers of students in grades 7–10 in a representative sample of co-educational post-primary schools in Victoria, Australia. Using open and closed response formats, the information sought included data on the teachers' professional backgrounds, computer ownership and use, and their beliefs and practices in using computers for the teaching of mathematics. In this article, findings related to ownership, professional development, perceptions of technological skills, beliefs about the efficacy of computer use in mathematics, and data on how teachers are using computers for teaching secondary mathematics are presented and discussed.

Innovation chains: possibilities and constraints for critical perspectives on computers, difference and educational innovation

While declarations of ‘innovativeness’ are easily found in most educational contexts, it is significantly more difficult to locate detailed definitions of what educational innovation actually means. In this paper we are interested in identifying the extent to which mainstream takes on ‘innovation’ (as played out in contemporary technology and equity debates) reflect or respond to what we will define as the more innovative dimensions of innovation literature itself. Our aim throughout this paper, then, is to begin the complex process of developing a means for distinguishing between projects that are ‘badged’ as innovative and projects that are more demonstrably (and sustainably) innovative. In this process we will distinguish between what Shiv Visvanathn describes as “innovation chains”— dynamic, rhizomatic, transformative responses to the contemporary world that lead to fundamentally new ways of conceptualising technology, culture and difference—and the constraints—or chains—provided by dominant understandings of innovation: chains which anchor us to existing, hegemonic and limiting understandings of student
diversity and educational technology.

Toddler techies: a study of young children`s interaction with computers

This article describes an ethnographic study of children's behavioural interaction with multimedia within a familiar context. The rationale for such a study was to provide data and evaluation of the capabilities of young children in an expressly modified multimedia environment and to determine the usefulness of employing technology as an adjunct to young children's play. However, hermeneutic and interpretativist concerns for the study of human action and social practice in the use of technology also informs both the structural, procedural, and evaluative management of the study. Using customised children's software, observation focused on time spent using the computer, the attitude toward the computer, the reaction to the interface, their use and adaptation of the mouse, and adult interventions. Significantly, the results differ appreciably from previous research and possible grounds for this variation is explored.

lCT and educational (dis) advantage: families, computers and contemporary social and educational inequalities

Because access to new technologies is unequally distributed, there has been considerable debate about the growing gap between the so-called information-rich and information-poor. Such concerns have led to high-profile information technology policy initiatives in many countries. In Australia, in an attempt to 'redress the balance between the information rich and poor' by providing 'equal access to the World Wide Web' (Virtual Communities, 2002), the Australian Council of Trade Unions, Virtual Communities (a computer/software distributor) and Primus (an Internet provider) in late 1999 formed an alliance to offer relatively inexpensive computer and Internet access to union members in order to make 'technology affordable for all Australians' (Virtual Communities, 2002). In this paper, we examine four families, one of which had long-term Information and Communication Technologies (lCT) access, and three of which took advantage of the Virtual Communities offer to get home computer and Internet access for the first time. We examine their engagement with lCT and suggest that previously disadvantaged family members are not particularly advantaged by their access to lCT.