Assessing the role of Mediterranean evergreen oaks canopy cover in land surface albedo and temperature using a remote sensing-based approach

Modifications in vegetation cover can have an impact on the climate through changes in biogeochemical and biogeophysical processes. In this paper, the tree canopy cover percentage of a savannah-like ecosystem (montado/dehesa) was estimated at Landsat pixel level for 2011, and the role of different canopy cover percentages on land surface albedo (LSA) and land surface temperature (LST) were analysed. A modelling procedure using a SGB machine-learning algorithm and Landsat 5-TM spectral bands and derived vegetation indices as explanatory variables, showed that the estimation of montado canopy cover was obtained with good agreement (R2 = 78.4%). Overall, montado canopy cover estimations showed that low canopy cover class (MT_1) is the most representative with 50.63% of total montado area. MODIS LSA and LST products were used to investigate the magnitude of differences in mean annual LSA and LST values between contrasting montado canopy cover percentages. As a result, it was found a significant statistical relationship between montado canopy cover percentage and mean annual surface albedo (R2 = 0.866, p < 0.001) and surface temperature (R2 = 0.942, p < 0.001). The comparisons between the four contrasting montado canopy cover classes showed marked differences in LSA (χ2 = 192.17, df = 3, p < 0.001) and LST (χ2 = 318.18, df = 3, p < 0.001). The highest montado canopy cover percentage (MT_4) generally had lower albedo than lowest canopy cover class, presenting a difference of −11.2% in mean annual albedo values. It was also showed that MT_4 and MT_3 are the cooler canopy cover classes, and MT_2 and MT_1 the warmer, where MT_1 class had a difference of 3.42 °C compared with MT_4 class. Overall, this research highlighted the role that potential changes in montado canopy cover may play in local land surface albedo and temperature variations, as an increase in these two biogeophysical parameters may potentially bring about, in the long term, local/regional climatic changes moving towards greater aridity.

Normalização automática de descrições de hotéis

As descrições de produtos turísticos na área da hotelaria, aviação, rent-a-car e pacotes de férias baseiam-se sobretudo em descrições textuais em língua natural muito heterogénea com estilos, apresentações e conteúdos muito diferentes entre si. Uma vez que o sector do turismo é bastante dinâmico e que os seus produtos e ofertas estão constantemente em alteração, o tratamento manual de normalização de toda essa informação não é possível. Neste trabalho construiu-se um protótipo que permite a classificação e extracção automática de informação a partir de descrições de produtos de turismo. Inicialmente a informação é classificada quanto ao tipo. Seguidamente são extraídos os elementos relevantes de cada tipo e gerados objectos facilmente computáveis. Sobre os objectos extraídos, o protótipo com recurso a modelos de textos e imagens gera automaticamente descrições normalizadas e orientadas a um determinado mercado. Esta versatilidade permite um novo conjunto de serviços na promoção e venda dos produtos que seria impossível implementar com a informação original. Este protótipo, embora possa ser aplicado a outros domínios, foi avaliado na normalização da descrição de hotéis. As frases descritivas do hotel são classificadas consoante o seu tipo (Local, Serviços e/ou Equipamento) através de um algoritmo de aprendizagem automática que obtém valores médios de cobertura de 96% e precisão de 72%. A cobertura foi considerada a medida mais importante uma vez que a sua maximização permite que não se percam frases para processamentos posteriores. Este trabalho permitiu também a construção e população de uma base de dados de hotéis que possibilita a pesquisa de hotéis pelas suas características. Esta funcionalidade não seria possível utilizando os conteúdos originais. ABSTRACT: The description of tourism products, like hotel, aviation, rent-a-car and holiday packages, is strongly supported on natural language expressions. Due to the extent of tourism offers and considering the high dynamics in the tourism sector, manual data management is not a reliable or scalable solution. Offer descriptions - in the order of thousands - are structured in different ways, possibly comprising different languages, complementing and/or overlap one another. This work aims at creating a prototype for the automatic classification and extraction of relevant knowledge from tourism-related text expressions. Captured knowledge is represented in a normalized/standard format to enable new services based on this information in order to promote and sale tourism products that would be impossible to implement with the raw information. Although it could be applied to other areas, this prototype was evaluated in the normalization of hotel descriptions. Hotels descriptive sentences are classified according their type (Location, Services and/or Equipment) using a machine learning algorithm. The built setting obtained an average recall of 96% and precision of 72%. Recall considered the most important measure of performance since its maximization allows that sentences were not lost in further processes. As a side product a database of hotels was built and populated with search facilities on its characteristics. This ability would not be possible using the original contents.

Digital soil mapping using reference area and artificial neural networks.

Digital soil mapping is an alternative for the recognition of soil classes in areas where pedological surveys are not available. The main aim of this study was to obtain a digital soil map using artificial neural networks (ANN) and environmental variables that express soillandscape relationships. This study was carried out in an area of 11,072 ha located in the Barra Bonita municipality, state of São Paulo, Brazil. A soil survey was obtained from a reference area of approximately 500 ha located in the center of the area studied. With the mapping units identified together with the environmental variables elevation, slope, slope plan, slope profile, convergence index, geology and geomorphic surfaces, a supervised classification by ANN was implemented. The neural network simulator used was the Java NNS with the learning algorithm "back propagation." Reference points were collected for evaluating the performance of the digital map produced. The occurrence of soils in the landscape obtained in the reference area was observed in the following digital classification: medium-textured soils at the highest positions of the landscape, originating from sandstone, and clayey loam soils in the end thirds of the hillsides due to the greater presence of basalt. The variables elevation and slope were the most important factors for discriminating soil class through the ANN. An accuracy level of 82% between the reference points and the digital classification was observed. The methodology proposed allowed for a preliminary soil classification of an area not previously mapped using mapping units obtained in a reference area

Topics in climate change risk

In this Thesis, we analyze how climate risk impacts economic players and its consequences on the financial markets. Essentially, literature unravels two main channels through which climate change poses risks to the status quo, namely physical and transitional risk, that we cover in three works. Firstly, the call for a global shift to a net-zero economy implicitly devalues assets that contribute to global warming that regulators are forcing to dismiss. On the other hand, abnormal changes in the temperatures as well as weather-related events challenge the environmental equilibrium and could directly affect operations as well as profitability. We start the analysis with the physical component, by presenting a statistical measure that generally represents shocks to the distribution of temperature anomalies. We oppose this statistic to classical physical measures and assess that it is the driver of the electricity consumption, in the weather derivatives market, and in the cross-section of equity returns. We find two transmission channels, namely investor attention, and firm operations. We then analyze the transition risk component, by associating a regulatory horizon characterization to fixed income valuation. We disentangle a risk driver for corporate bond overperformance that is tight to change in credit riskiness. After controlling a statistical learning algorithm to forecast excess returns, we include carbon emission metrics without clear evidence. Finally, we analyze the effects of change in carbon emission on a regulated market such as the EU ETS by selecting utility sector corporate bond and, after controlling for the possible risk factor, we document how a firm’s carbon profile differently affects the term structure of credit riskiness.

Mathematical methods to analyze and interpret calcium signals of astrocytes

Astrocytes are the most numerous glial cell type in the mammalian brain and permeate the entire CNS interacting with neurons, vasculature, and other glial cells. Astrocytes display intracellular calcium signals that encode information about local synaptic function, distributed network activity, and high-level cognitive functions. Several studies have investigated the calcium dynamics of astrocytes in sensory areas and have shown that these cells can encode sensory stimuli. Nevertheless, only recently the neuro-scientific community has focused its attention on the role and functions of astrocytes in associative areas such as the hippocampus. In our first study, we used the information theory formalism to show that astrocytes in the CA1 area of the hippocampus recorded with 2-photon fluorescence microscopy during spatial navigation encode spatial information that is complementary and synergistic to information encoded by nearby "place cell" neurons. In our second study, we investigated various computational aspects of applying the information theory formalism to astrocytic calcium data. For this reason, we generated realistic simulations of calcium signals in astrocytes to determine optimal hyperparameters and procedures of information measures and applied them to real astrocytic calcium imaging data. Calcium signals of astrocytes are characterized by complex spatiotemporal dynamics occurring in subcellular parcels of the astrocytic domain which makes studying these cells in 2-photon calcium imaging recordings difficult. However, current analytical tools which identify the astrocytic subcellular regions are time consuming and extensively rely on user-defined parameters. Here, we present Rapid Astrocytic calcium Spatio-Temporal Analysis (RASTA), a novel machine learning algorithm for spatiotemporal semantic segmentation of 2-photon calcium imaging recordings of astrocytes which operates without human intervention. We found that RASTA provided fast and accurate identification of astrocytic cell somata, processes, and cellular domains, extracting calcium signals from identified regions of interest across individual cells and populations of hundreds of astrocytes recorded in awake mice.

Radio frequency communication and fault detection for railway signalling

The continuous and swift progression of both wireless and wired communication technologies in today's world owes its success to the foundational systems established earlier. These systems serve as the building blocks that enable the enhancement of services to cater to evolving requirements. Studying the vulnerabilities of previously designed systems and their current usage leads to the development of new communication technologies replacing the old ones such as GSM-R in the railway field. The current industrial research has a specific focus on finding an appropriate telecommunication solution for railway communications that will replace the GSM-R standard which will be switched off in the next years. Various standardization organizations are currently exploring and designing a radiofrequency technology based standard solution to serve railway communications in the form of FRMCS (Future Railway Mobile Communication System) to substitute the current GSM-R. Bearing on this topic, the primary strategic objective of the research is to assess the feasibility to leverage on the current public network technologies such as LTE to cater to mission and safety critical communication for low density lines. The research aims to identify the constraints, define a service level agreement with telecom operators, and establish the necessary implementations to make the system as reliable as possible over an open and public network, while considering safety and cybersecurity aspects. The LTE infrastructure would be utilized to transmit the vital data for the communication of a railway system and to gather and transmit all the field measurements to the control room for maintenance purposes. Given the significance of maintenance activities in the railway sector, the ongoing research includes the implementation of a machine learning algorithm to detect railway equipment faults, reducing time and human analysis errors due to the large volume of measurements from the field.

Novel methods of state estimation and parameter identification for high-performance motorcycles

This research activity aims at providing a reliable estimation of particular state variables or parameters concerning the dynamics and performance optimization of a MotoGP-class motorcycle, integrating the classical model-based approach with new methodologies involving artificial intelligence. The first topic of the research focuses on the estimation of the thermal behavior of the MotoGP carbon braking system. Numerical tools are developed to assess the instantaneous surface temperature distribution in the motorcycle's front brake discs. Within this application other important brake parameters are identified using Kalman filters, such as the disc convection coefficient and the power distribution in the disc-pads contact region. Subsequently, a physical model of the brake is built to estimate the instantaneous braking torque. However, the results obtained with this approach are highly limited by the knowledge of the friction coefficient (μ) between the disc rotor and the pads. Since the value of μ is a highly nonlinear function of many variables (namely temperature, pressure and angular velocity of the disc), an analytical model for the friction coefficient estimation appears impractical to establish. To overcome this challenge, an innovative hybrid solution is implemented, combining the benefit of artificial intelligence (AI) with classical model-based approach. Indeed, the disc temperature estimated through the thermal model previously implemented is processed by a machine learning algorithm that outputs the actual value of the friction coefficient thus improving the braking torque computation performed by the physical model of the brake. Finally, the last topic of this research activity regards the development of an AI algorithm to estimate the current sideslip angle of the motorcycle's front tire. While a single-track motorcycle kinematic model and IMU accelerometer signals theoretically enable sideslip calculation, the presence of accelerometer noise leads to a significant drift over time. To address this issue, a long short-term memory (LSTM) network is implemented.

Flower cover and bee diversity estimate by drone RGB images

Worldwide, biodiversity is decreasing due to climate change, habitat fragmentation and agricultural intensification. Bees are essential crops pollinator, but their abundance and diversity are decreasing as well. For their conservation, it is necessary to assess the status of bee population. Field data collection methods are expensive and time consuming thus, recently, new methods based on remote sensing are used. In this study we tested the possibility of using flower cover diversity estimated by UAV images (FCD-UAV) to assess bee diversity and abundance in 10 agricultural meadows in the Netherlands. In order to do so, field data of flower and bee diversity and abundance were collected during a campaign in May 2021. Furthermore, RGB images of the areas have been collected using Unmanned Aerial Vehicle (UAV) and post-processed into orthomosaics. Lastly, Random Forest machine learning algorithm was applied to estimate FCD of the species detected in each field. Resulting FCD was expressed with Shannon and Simpson diversity indices, which were successively correlated to bee Shannon and Simpson diversity indices, abundance and species richness. The results showed a positive relationship between FCD-UAV and in-situ collected data about bee diversity, evaluated with Shannon index, abundance and species richness. The strongest relationship was found between FCD (Shannon Index) and bee abundance with R2=0.52. Following, good correlations were found with bee species richness (R2=0.39) and bee diversity (R2=0.37). R2 values of the relationship between FCD (Simpson Index) and bee abundance, species richness and diversity were slightly inferior (0.45, 0.37 and 0.35, respectively). Our results suggest that the proposed method based on the coupling of UAV imagery and machine learning for the assessment of flower species diversity could be developed into valuable tools for large-scale, standardized and cost-effective monitoring of flower cover and of the habitat quality for bees.

HYBRID AND INCREMENTAL FUZZY LEARNING FOR HUMAN SKIN DETECTION

In this paper, a framework for detection of human skin in digital images is proposed. This framework is composed of a training phase and a detection phase. A skin class model is learned during the training phase by processing several training images in a hybrid and incremental fuzzy learning scheme. This scheme combines unsupervised-and supervised-learning: unsupervised, by fuzzy clustering, to obtain clusters of color groups from training images; and supervised to select groups that represent skin color. At the end of the training phase, aggregation operators are used to provide combinations of selected groups into a skin model. In the detection phase, the learned skin model is used to detect human skin in an efficient way. Experimental results show robust and accurate human skin detection performed by the proposed framework.

Video activity extraction and reporting with incremental unsupervised learning

The present work presents a new method for activity extraction and reporting from video based on the aggregation of fuzzy relations. Trajectory clustering is first employed mainly to discover the points of entry and exit of mobiles appearing in the scene. In a second step, proximity relations between resulting clusters of detected mobiles and contextual elements from the scene are modeled employing fuzzy relations. These can then be aggregated employing typical soft-computing algebra. A clustering algorithm based on the transitive closure calculation of the fuzzy relations allows building the structure of the scene and characterises the ongoing different activities of the scene. Discovered activity zones can be reported as activity maps with different granularities thanks to the analysis of the transitive closure matrix. Taking advantage of the soft relation properties, activity zones and related activities can be labeled in a more human-like language. We present results obtained on real videos corresponding to apron monitoring in the Toulouse airport in France.

Learning Bayesian networks from data by the incremental compilation of new network polynomials

Probabilistic graphical models are a huge research field in artificial intelligence nowadays. The scope of this work is the study of directed graphical models for the representation of discrete distributions. Two of the main research topics related to this area focus on performing inference over graphical models and on learning graphical models from data. Traditionally, the inference process and the learning process have been treated separately, but given that the learned models structure marks the inference complexity, this kind of strategies will sometimes produce very inefficient models. With the purpose of learning thinner models, in this master thesis we propose a new model for the representation of network polynomials, which we call polynomial trees. Polynomial trees are a complementary representation for Bayesian networks that allows an efficient evaluation of the inference complexity and provides a framework for exact inference. We also propose a set of methods for the incremental compilation of polynomial trees and an algorithm for learning polynomial trees from data using a greedy score+search method that includes the inference complexity as a penalization in the scoring function.

An incremental tri-partite approach to ontology learning

In this paper we present a new approach to ontology learning. Its basis lies in a dynamic and iterative view of knowledge acquisition for ontologies. The Abraxas approach is founded on three resources, a set of texts, a set of learning patterns and a set of ontological triples, each of which must remain in equilibrium. As events occur which disturb this equilibrium various actions are triggered to re-establish a balance between the resources. Such events include acquisition of a further text from external resources such as the Web or the addition of ontological triples to the ontology. We develop the concept of a knowledge gap between the coverage of an ontology and the corpus of texts as a measure triggering actions. We present an overview of the algorithm and its functionalities.

Distributed Estimation Over an Adaptive Incremental Network Based on the Affine Projection Algorithm

We study the problem of distributed estimation based on the affine projection algorithm (APA), which is developed from Newton`s method for minimizing a cost function. The proposed solution is formulated to ameliorate the limited convergence properties of least-mean-square (LMS) type distributed adaptive filters with colored inputs. The analysis of transient and steady-state performances at each individual node within the network is developed by using a weighted spatial-temporal energy conservation relation and confirmed by computer simulations. The simulation results also verify that the proposed algorithm provides not only a faster convergence rate but also an improved steady-state performance as compared to an LMS-based scheme. In addition, the new approach attains an acceptable misadjustment performance with lower computational and memory cost, provided the number of regressor vectors and filter length parameters are appropriately chosen, as compared to a distributed recursive-least-squares (RLS) based method.