The influence of tool geometry on the performance of drilling tools

The main objective of the work presented in this thesis is to investigate the two sides of the flute, the face and the heel of a twist drill. The flute face was designed to yield straight diametral lips which could be extended to eliminate the chisel edge, and consequently a single cutting edge will be obtained. Since drill rigidity and space for chip conveyance have to be a compromise a theoretical expression is deduced which enables optimum chip disposal capacity to be described in terms of drill parameters. This expression is used to describe the flute heel side. Another main objective is to study the effect on drill performance of changing the conventional drill flute. Drills were manufactured according to the new flute design. Tests were run in order to compare the performance of a conventional flute drill and non conventional design put forward. The results showed that 50% reduction in thrust force and approximately 18% reduction in torque were attained for the new design. The flank wear was measured at the outer corner and found to be less for the new design drill than for the conventional one in the majority of cases. Hole quality, roundness, size and roughness were also considered as a further aspect of drill performance. Improvement in hole quality is shown to arise under certain cutting conditions. Accordingly it might be possible to use a hole which is produced in one pass of the new drill which previously would have required a drilled and reamed hole. A subsidiary objective is to design the form milling cutter that should be employed for milling the foregoing special flute from drill blank allowing for the interference effect. A mathematical analysis in conjunction with computing technique and computers is used. To control the grinding parameter, a prototype drill grinder was designed and built upon the framework of an existing cincinnati cutter grinder. The design and build of the new grinder is based on a computer aided drill point geometry analysis. In addition to the conical grinding concept, the new grinder is also used to produce spherical point utilizing a computer aided drill point geometry analysis.

Health and population effects of rare gene knockouts in adult humans with related parents

Examining complete gene knockouts within a viable organism can inform on gene function. We sequenced the exomes of 3222 British Pakistani-heritage adults with high parental relatedness, discovering 1111 rare-variant homozygous genotypes with predicted loss of gene function (knockouts) in 781 genes. We observed 13.7% fewer than expected homozygous knockout genotypes, implying an average load of 1.6 recessive-lethal-equivalent LOF variants per adult. Linking genetic data to lifelong health records, knockouts were not associated with clinical consultation or prescription rate. In this dataset we identified a healthy PRDM9 knockout mother, and performed phased genome sequencing on her, her child and controls, which showed meiotic recombination sites localized away from PRDM9-dependent hotspots. Thus, natural LOF variants inform upon essential genetic loci, and demonstrate PRDM9 redundancy in humans.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Health reforms in Latin America: processes and results

Two types of health reforms in Latin America are analysed: one based on insurance and service commodification and the one referred to the unified public systems of progressive governments. Health insurance with explicit service packages has not fulfilled their purposes of universal coverage, equal access to necessary health services and improvement of health conditions but has opened health as a field of profit making for insurance companies and private health providers. The national health services as a state obligation have developed territorialized health services and widened substantially timely access to the majority of the population. The adoption of an integrated and wide social policy has an impact on population well fare. It faces some problems derived from the old health systems and the power of the insurance and medical complex.

Beginkenmerken en Pedagogisch-Didactische Kern Structuur®: Handleiding voor scholen en leerkrachten in het Primair Onderwijs

Kinderen worden in basisscholen veelal in leeftijdsgroepen ingedeeld. Er zijn dan steeds leerlingen die ten opzichte van leeftijdsgenoten heel goed of juist slecht presteren. Dit leidt bij deze 'relatief afwijkende leerlingen' tot demotivatie, gerichtheid op andere activiteiten, en 'onderpresteren'. In de hier voorgestane pedagogiek en didactiek wordt elk kind, per ontwikkelings- of competentiegebied, doorlopend en adequaat gesteund. Dit is ook conform de vigerende onderwijswetgeving. De praktische consequentie is dat het onderwijsaanbod in elke groep of klas steeds dient te zijn afgestemd op de werkelijke (begin)kenmerken van de aanwezige leerlingen. Vervolgens dient elk kind in school steeds iets boven het eigen niveau te kunnen spelen en leren, deels volgens eigen voorkeuren en eigen regulatie. Dit vereist voorbereide onderwijsleersituaties en een doorlopend helder inzicht in relevante diagnostische ontwikkelings- en leerniveaus alsmede in de individuele leerprocessen en -effecten. Praktische realisatie van deze eisen vraagt ten eerste om vaststelling van de beginkenmerken van leerlingen. Ten tweede dient het feitelijke speel- en leeraanbod te zijn georganiseerd in aansluiting op deze individuele beginkenmerken, in een meer flexibele vormgeving dan gebruikelijk. Deze twee onderwijsaspecten worden hier concreet uitgewerkt en ingevuld in het kader van een handleiding voor ontwikkelings- of design-based onderzoek dat samen met leerkrachten en management wordt uitgevoerd.

Immunoglobulin gene rearrangements and the pathogenesis of multiple myeloma.

The ability to rearrange the germ-line DNA to generate antibody diversity is an essential prerequisite for the production of a functional repertoire. While this is essential to prevent infections, it also represents the "Achilles heel" of the B-cell lineage, occasionally leading to malignant transformation of these cells by translocation of protooncogenes into the immunoglobulin (Ig) loci. However, in evolutionary terms this is a small price to pay for a functional immune system. The study of the configuration and rearrangements of the Ig gene loci has contributed extensively to our understanding of the natural history of development of myeloma. In addition to this, the analysis of Ig gene rearrangements in B-cell neoplasms provides information about the clonal origin of the disease, prognosis, as well as providing a clinical useful tool for clonality detection and minimal residual disease monitoring. Herein, we review the data currently available on both Ig gene rearrangements and protein patterns seen in myeloma with the aim of illustrating how this knowledge has contributed to our understanding of the pathobiology of myeloma.

Evaluation of an in-house molecular HIV-1 test to assess mother-to-child HIV-1 transmission in Angola (the APEHC cohort)

Poster presented at the 17th Annual International Meeting of the Institute of Human Virology. Baltimore, 27-30 September 2015

Prevalencia de las deformidades óseas y estructurales en pacientes con pie diabético que acuden al área de consulta externa de traumatología del Hospital Regional Vicente Corral Moscoso, Cuenca-Ecuador 2015

Objetivo general: Establecer la prevalencia de las deformidades óseas y estructurales en pacientes con pie diabético que acudieron al área de consulta externa de Traumatología del Hospital Regional Vicente Corral Moscoso durante el período de tres meses. Metodología: Estudio descriptivo llevado a cabo en 100 pacientes con pie diabético que acudieron a la consulta externa de Traumatología durante tres meses. El método de investigación fue la observación directa; las técnicas comprendieron entrevista, evaluación mediante plantoscopía y valoración radiográfica, los instrumentos usados fueron los formularios, los datos tras su validación fueron ingresados en una base en el programa SPSS V15; mediante el cual se realizó el análisis usando tablas simples con porcentajes y frecuencias relativas. Resultados: La media de edad fue de 64,09 años con el 84% de la población de sexo femenino; el cuadro clínico se caracterizó por presencia de callosidades 62%; metatarsalgia 57%; talalgia 48% y dolor en bunion de 21%. Tomando en consideración los parámetros radiográficos se diagnosticó hallux valgus 71%; deformidades de los dedos en garra 56%; pie plano 34%; dedos en martillo 31%; juanetillo de sastre 30%; hallux rigidus 16% y pie cavo 13%. La valoración mediante el uso de plantoscopía reveló 39% de pacientes pie plano y el 17% pie cavo

Effect of firefighter boots and viscoelastic insoles on the impact force of the ground reaction force’s vertical component

The aims of the present study were to determine the effect of firefighter's boots on the vertical component of the ground reaction force (GRF) at heel strike, also known as heel strike transient and to analyze the effect of the viscoelastic insoles placed into the firefighter’s boots on this force during the gait. The magnitude of the impact force (FZI) from the vertical ground reaction force, the time to the production of this force (TZI) and the loading rate (GC) were registered. 39 firefighters without any pathology during 2 years before the study were recruited. Three different walking conditions were tested: 1) gait with firefighter's boots, 2) gait with firefighter's boots and viscoelastic insoles and 3) gait with sport shoes. The results showed a higher production and magnitude of the impact force during gait with firefighter's boots than during gait with sport shoes (13,1 vs. 2,6 % of occurrence of the impact force and 61,39 ± 35,18 %BW (body weight) vs. 49,38 ± 22,99 %BW, respectively). The gait with viscoelastic insoles placed into the firefighter's boots did not show significant differences in any of the parameters characterizing the impact force compared to the gait without insoles. The results of this study show a lower cushioning of the impact force during the gait with firefighter's boots in comparison to the gait with sport shoes and the inefficiency of the viscoelastic insoles placed inside the firefighter's boots to ameliorate the cushioning of the impact force at natural walking speed.

Estudo comparativo da injeção de água usando poços verticais e horizontais

Oil recovery using waterflooding has been until now the worldwide most applied method, specially for light oil recovery, its success is mainly because of the low costs involved and the facilities of the injection process. The Toe- To-Heel Waterflooding TTHWTM method uses a well pattern of vertical injector wells completed at the bottom of the reservoir and horizontal producer wells completed at the top of it. The main producing mechanism is gravitational segregation in short distance. This method has been studied since the early 90´s and it had been applied in Canada with positive results for light heavy oils, nevertheless it hasn´t been used in Brazil yet. In order to verify the applicability of the process in Brazil, a simulation study for light oil was performed using Brazilian northwest reservoirs characteristics. The simulations were fulfilled using the STARS module of the Computer Modelling Group Software, used to perform improved oil recovery studies. The results obtained in this research showed that the TTHWTM well pattern presented a light improvement in terms of recovery factor when compared to the conventional 5- Spot pattern, however, it showed lower results in the economic evaluation

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Balance ability in 7- and 10-year-old children:associations with prenatal lead and cadmium exposure and with blood lead levels in childhood in a prospective birth cohort study

OBJECTIVES: Most studies reporting evidence of adverse effects of lead and cadmium on the ability to balance have been conducted in high-exposure groups or have included adults. The effects of prenatal exposure have not been well studied, nor have the effects in children been directly studied. The aim of the study was to identify the associations of lead (in utero and in childhood) and cadmium (in utero) exposure with the ability to balance in children aged 7 and 10 years. DESIGN: Prospective birth cohort study. PARTICIPANTS: Maternal blood lead (n=4285) and cadmium (n=4286) levels were measured by inductively coupled plasma mass spectrometry in women enrolled in the Avon Longitudinal Study of Parents and Children (ALSPAC) during pregnancy. Child lead levels were measured in a subsample of 582 of ALSPAC children at age 30 months. MAIN OUTCOME MEASURES: Children completed a heel-to-toe walking test at 7 years. At 10 years, the children underwent clinical tests of static and dynamic balance. Statistical analysis using SPSS V.19 included logistic regression modelling, comparing categories of ≥ 5 vs <5 µg/dL for lead, and ≥ 1 vs <1 µg/L for cadmium. RESULTS: Balance at age 7 years was not associated with elevated in utero lead or cadmium exposure (adjusted OR for balance dysfunction: Pb 1.01 (95% CI 0.95 to 1.01), n=1732; Cd 0.95 (0.77 to 1.20), n=1734), or with elevated child blood lead level at age 30 months (adjusted OR 0.98 (0.92 to 1.05), n=354). Similarly, neither measures of static nor dynamic balance at age 10 years were associated with in utero lead or cadmium exposure, or child lead level. CONCLUSIONS: These findings do not provide any evidence of an association of prenatal exposure to lead or cadmium, or lead levels in childhood, on balance ability in children. Confirmation in other cohorts is needed.

Prenatal alcohol exposure and childhood balance ability:findings from a UK birth cohort study

OBJECTIVE: To investigate the association of prenatal alcohol exposure with balance in10-year-old children. DESIGN: Population-based prospective longitudinal study. SETTING: Former Avon region of UK (Southwest England). PARTICIPANTS: 6915 children from the Avon Longitudinal Study of Parents and Children who had a balance assessment at age 10 and had data on maternal alcohol consumption. OUTCOME MEASURES: 3 composite balance scores: dynamic balance (beam-walking), static balance eyes open, static balance eyes closed (heel-to-toe balance on a beam and standing on one leg, eyes open or closed). RESULTS: Most mothers (95.5%) consumed no-to-moderate amounts (3-7 glasses/week) of alcohol during pregnancy. Higher total-alcohol consumption was associated with maternal-social advantage, whereas binge drinking (≥4 units/day) and abstinence were associated with maternal social disadvantage. No evidence was found of an adverse effect of maternal-alcohol consumption on childhood balance. Higher maternal-alcohol use during pregnancy was generally associated with better offspring outcomes, with some specific effects appearing strong (static balance eyes open and moderate total alcohol exposure at 18 weeks, adjusted OR 1.23 (95% CI 1.01 to 1.49); static balance eyes closed and moderate total alcohol exposure at 18 weeks, adjusted OR 1.25 (95% CI 1.06 to 1.48). Similar results were found for both paternal and postnatal maternal alcohol exposure. A Mendelian-randomization approach was used to estimate the association between maternal genotype and offspring balance using the non-synonymous variant rs1229984*A (ADH1B) to proxy for lower maternal alcohol consumption; no strong associations were found between this genotype/proxy and offspring balance. CONCLUSIONS: No evidence was found to indicate that moderate maternal alcohol consumption in this population sample had an adverse effect on offspring balance at age 10. An apparent beneficial effect of higher total maternal alcohol consumption on offspring balance appeared likely to reflect residual confounding.

Balance ability of 7 and 10 year old children in the population:results from a large UK birth cohort study

OBJECTIVE: The literature contains many reports of balance function in children, but these are often on atypical samples taken from hospital-based clinics and may not be generalisable to the population as a whole. The purpose of the present study is to describe balance test results from a large UK-based birth cohort study. METHODS: Data from the Avon Longitudinal Study of Parents and Children (ALSPAC) were analysed. A total of 5402 children completed the heel-to-toe walking test at age 7 years. At age 10 years, 6915 children underwent clinical tests of balance including beam-walking, standing heel-to-toe on a beam and standing on one leg. A proportion of the children returned to the clinic for retesting within 3 months allowing test-retest agreement to be measured. RESULTS: Frequency distributions for each of the balance tests are given. Correlations between measures of dynamic balance at ages 7 and 10 years were weak. The static balance of 10 year old children was found to be poorer with eyes closed than with eyes open, and poorer in boys than in girls for all measures. Balance on one leg was poorer than heel-to-toe balance on a beam. A significant learning effect was found when first and second attempts of the tests were compared. Measures of static and dynamic balance appeared independent. Consistent with previous reports in the literature, test-retest reliability was found to be low. CONCLUSIONS: This study provides information about the balance ability of children aged 7 and 10 years and provides clinicians with reference data for balance tests commonly used in the paediatric clinic.