Observatorio del acuerdo comercial alianza pacífico en Colombia: oportunidades de exportación para Colombia a Chile, México y Perú

El desarrollo del presente proyecto de investigación, identifica, consolida, analiza datos económicos y el comportamiento del comercio exterior de Colombia, Chile, Perú y México dentro de la evolución del Acuerdo Alianza Pacífico durante los años 2011 - 2013. El estudio permitirá tener una visión más concreta, sobre la viabilidad que este bloque comercial representa para Colombia y mostrará cual ha sido el desempeño del país dentro del acuerdo con base a las exportaciones e importaciones efectuadas con los demás países miembros de la alianza. A lo largo del estudio, se analizará la balanza comercial de los treinta y dos (32) departamentos colombianos con los países miembros del acuerdo Alianza del Pacifico (Chile, México y Perú) entre 2011 – 2013. A partir de la obtención y análisis de resultados de tipo cuantitativo y cualitativo como el valor las exportaciones e importaciones, se hace un diagnóstico del comportamiento de la comercialización de productos por parte de los departamentos con destino y desde de Chile, México y Perú. Este análisis nos permitirá identificar cuáles son los bienes de mayor exportación y su participación dentro de las transacciones comerciales del acuerdo Alianza Pacifico. Con base a los datos que se recopilen, será posible analizar la situación y el papel que juega Colombia actualmente dentro del acuerdo y así identificar así las oportunidades, debilidades y posibles consecuencias, producto de la firma de este tratado. Finalmente, con la presente investigación se buscará iniciar el Observatorio del Acuerdo Alianza Pacifico, el cual se creará con fines investigativos, facilitando el seguimiento a la evolución de dicho acuerdo. A través del observatorio se lograra saber cuáles son los comportamientos en materia económica, tales como balanza comercial, inversión extranjera, movilidad, entre otros de este bloque de integración. Adicionalmente, será posible y analizar el comportamiento de los principales sectores económicos y los departamentos involucrados en este proceso, en términos comerciales.

Ordered-defect sulfides as thermoelectric materials

The thermoelectric behaviour of the transition-metal disulphides n-type NiCr2S4 and p-type CuCrS2 is investigated. Materials prepared by high-temperature reaction were consolidated using cold-pressing and sintering, hot-pressing (HP) in graphite dies or spark-plasma sintering (SPS) in tungsten carbide dies. The consolidation conditions have a marked influence on the electrical transport properties. In addition to the effect on sample density, altering the consolidation conditions results in changes to the sample composition, including the formation of impurity phases. Maximum room-temperature power factors are 0.18 mW m-1 K-2 and 0.09 mW m-1 K-2 for NiCr2S4 and CuCrS2, respectively. Thermal conductivities of ca. 1.4 and 1.2 W m-1 K-1 lead to figures of merit of 0.024 and 0.023 for NiCr2S4 and CuCrS2, respectively.

The interplay of metal-atom ordering, Fermi leveltuning and thermoelectric properties in cobalt shandites Co3M2S2 (M = Sn, In)

A combination of structural, physical and computational techniques including powder X-ray and neutron diffraction, SQUID magnetometry, electrical and thermal transport measurements, DFT calculations and 119Sn Mössbauer and X-ray photoelec-tron spectroscopies has been applied to Co3Sn2-xInxS2 (0 ≤ x ≤ 2) in an effort to understand the relationship between metal-atom ordering and physical properties as the Fermi level is systematically varied. Whilst solid solution behavior is found throughout the composition region, powder neutron diffraction reveals that indium preferentially occupies an inter-layer site over an alternative kagome-like intra-layer site. DFT calculations indicate that this ordering, which leads to a lowering of energy, is related to the dif-fering bonding properties of tin and indium. Spectroscopic data suggest that throughout the composition range 0 ≤ x ≤ 2, all ele-ments adopt oxidation states that are significantly reduced from expectations based on formal charges. Chemical substitution ena-bles the electrical transport properties to be controlled through tuning of the Fermi level within a region of the density of states, which comprises narrow bands of predominantly Co d-character. This leads to a compositionally-induced double metal-to-semiconductor-to-metal transition. The marked increase in the Seebeck coefficient as the semiconducting region is approached leads to a substantial improvement in the thermoelectric figure of merit, ZT, which exhibits a maximum of ZT = 0.32 at 673 K. At 425 K, the figure of merit for phases in the region 0.8 ≤ x ≤ 0.85 is amongst the highest reported for sulphide phases, suggesting these materials may have applications in low-grade waste heat recovery.

Elastomeric Composites Based on Ethylene-Propylene-Diene Monomer Rubber and Conducting Polymer-Modified Carbon Black

Thermally stable elastomeric composites based on ethylene-propylene-diene monomer (EPDM) and conducting polymer-modified carbon black (CPMCB) additives were produced by casting and crosslinked by compression molding. CPMCB represent a novel thermally stable conductive compound made via ""in situ"" deposition of intrinsically conducting polymers (ICP) such as polyaniline or polypyrrole on carbon black particles. Thermogravimetric analysis showed that the composites are thermally stable with no appreciable degradation at ca. 300 degrees C. Incorporating CPMCB has been found to be advantageous to the processing of composites, as the presence of ICP lead to a better distribution of the filler within the rubber matrix, as confirmed by morphological analysis. These materials have a percolation threshold range of 5-10 phr depending on the formulation and electrical dc conductivity values in the range of 1 x 10(-3) to 1 x 10(-2) S cm(-1) above the percolation threshold. A less pronounced reinforcing effect was observed in composites produced with ICP-modified additives in relation to those produced only with carbon black. The results obtained in this study show the feasibility of this method for producing stable, electrically conducting composites with elastomeric characteristics. POLYM. COMPOS., 30:897-906, 2009. (C) 2008 Society of Plastics Engineers

Ingestion rates of Artemia nauplii for different larval stages of Macrobrachium rosenbergii

The functional response between ingestion rate and food concentration was determined for each larval stage of Macrobrachium rosenbergii. Artemia franciscana nauplii were supplied at 2,4, 6, 8, 10 and 12 per milliliter. The nauplii were counted by sight using a Pasteur pipette and transferred to Petri dishes containing 40 ml of brackish water (12 parts per thousand) lying on the top of black plastic. One larva at each stage was individually placed into each Petri dish containing different food density. After 24 h, each larva was removed from the Petri dish and the leftover nauplii were counted. The amount consumed was determined by the difference between the initial and final number of nauplii. Ingestion rate (I) increased as food density (P) increased and was defined by the model I=I-m(1-e(-kP)). The results suggest four levels of ingestion during larval development. The first level includes stages II, III and IV, with average maximum consumption of about 40 nauplii/day; the second level includes stages V and VI, with consumption of approximately 55 nauplii/day; the third level includes stages VII and VIII, with consumption of 80-100 nauplii/day. The fourth level includes stages IX, X and XI, in which the high values for maximum ingestion (Im) exceed the load capacity of the medium. The low values for constant k (that may correspond to the adaptability of the food to prey characteristics, such as, size, mobility, etc.) obtained for stages IX, X and XI indicated that Artemia is not an adequate prey and there is necessity of a supplementary diet. The best relationship between predator and prey seemed to occur during stage IV Results obtained in the present work may subsidize future researches and serve as a guideline for practical considerations of feeding rates. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Aplicação da técnica de caminhamento elétrico em área contaminada por derivados de petróleo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bacterial cellulose membrane as flexible substrate for organic light emitting devices

Bacterial cellulose (BC) membranes produced by gram-negative, acetic acid bacteria (Gluconacetobacter xylinus), were used as flexible substrates for the fabrication of Organic Light Emitting Diodes (OLED). In order to achieve the necessary conductive properties indium tin oxide (ITO) thin films were deposited onto the membrane at room temperature using radio frequency (r.f) magnetron sputtering with an r.f. power of 30 W, at pressure of 8 mPa in Ar atmosphere without any subsequent thermal treatment. Visible light transmittance of about 40% was observed. Resistivity, mobility and carrier concentration of deposited ITO films were 4.90 x 10(-4) Ohm cm, 8.08 cm(2)/V-s and -1.5 x 10(21) cm(-3), respectively, comparable with commercial ITO substrates. In order to demonstrate the feasibility of devices based on BC membranes three OLEDs with different substrates were produced: a reference one with commercial ITO on glass, a second one with a SiO(2) thin film interlayer between the BC membrane and the ITO layer and a third one just with ITO deposited directly on the BC membrane. The observed OLED luminance ratio was: 1; 0.5; 0.25 respectively, with 2400 cd/m(2) as the value for the reference OLED. These preliminary results show clearly that the functionalized biopolymer, biodegradable, biocompatible bacterial cellulose membranes can be successfully used as substrate in flexible organic optoelectronic devices. (C) 2008 Elsevier B.V. All rights reserved.

Estudo geofísico para a caracterização geológica e hidrogeológica da subsuperfície rasa em área de deposição de rejeitos sólidos no município de Barcarena-PA

Este estudo foi realizado na Área de Depósito de Rejeitos Sólidos (ADRS) da ALBRAS (Alumínio Brasileiro S.A.), localizada no município de Barcarena, Estado do Pará. Os resultados alcançados permitiram estabelecer um padrão de caracterização da subsuperfície, a partir de medidas geofísicas, fornecendo informações sobre as camadas geológicas e sobre parâmetros hidrogeológicos, tais como direção e velocidade do fluxo subterrâneo. Na realização do trabalho foram utilizados três métodos geofísicos: os métodos elétricos (Potencial Espontâneo e Eletrorresitividade) e eletromagnético (Slingram). A distribuição dos potenciais medidos através do Método do Potencial Espontâneo indicaram o sentido do fluxo subterrâneo local. Durante o estudo, foi montado um experimento de infiltração de solução salina no solo e seu efeito foi monitorado através de imageamento elétrico. Esse experimento permitiu que se estimasse a velocidade e o sentido do fluxo subterrâneo local ao longo da linha de imageamento. Os modelos interpretativos obtidos através da inversão de dados de resistividade aparente obtidos em sondagens elétricas verticais apresentaram uma boa correlação com perfis de raios gama corridos em poços tubulares da área de estudo. Estas Sondagens Elétricas Verticais permitiram que se detalhasse as unidades litológicas rasas através da estimativa de seus valores de resistividade e espessura. A interpretação dos dados eletromagnéticos através da análise de perfis de medidas, sondagens eletromagnéticas e mapas de contornos permitiu identificar a presença de zonas mais condutivas (material argiloso) e zonas mais resistivas (material arenoso). Além disso, observou-se que o mapa de contornos para a freqüência de 14080 Hz apresentou uma boa correlação com o mapa de contornos do Potencial Espontâneo referente a mesma área.

Métodos geofísicos aplicados à prospecção de cobre na Serras de Carajás-Pará

Através de um convênio entre o Núcleo de Ciências Geofísicas e Geológicas da UFPa e a Companhia Rio Doce Geologia e Mineração S.A., um trabalho geofísico foi realizado na área denomina da ALVO 1, MM1, Serra dos Carajás, sul do Pará, Brasil. Foram aplicados os métodos magnético, polarização elétrica induzida e AFMAG, visando determinar a existência e a distribuição de sulfetos de cobre em subsuperfície. O trabalho foi realizado em uma malha de reconhecimento de 9 km² (ALVO 1) e em outra de detalhe com aproximadamente 0.63 km² (Corpo 2). O método AFMAG detectou vários condutores deslocados entre si por prováveis falhamentos. A orientação destes condutores, coincide com o "strike" dominante do xisto, o qual contém sulfetos de cobre associado a uma formação ferrífera. Pela estreita correlação que guardam com as anomalias magnéticas é possível supor-se que as anomalias de AFMAG são provocadas primeiramente pela formação ferrífera e secundariamente pelos sulfetos. O método magnético detectou fortes anomalias sobre a formação ferrífera. O deslocamento dos segmentos de anomalias implica em falhamento. Este método é muito importante na área, pela relação mantida entre a zona dos sulfetos e a formação ferrífera. O método polarização elétrica induzida/resistividade detectou anomalias com EPF variando de 6 a 12% aproximadamente. Várias destas anomalias foram confirmadas com furos de sondagem e trabalho de laboratório (Rocha, 1979). Verificou-se que essas anomalias provavelmente são provocadas por efeito combinado da formação ferrífera magnética e do sulfeto. A pesquisa geofísica realizada nesta área piloto tem grande importância porque os resultados obtidos poderão ser estendidos a uma área maior, em condições geológicas semelhantes.

Análise da acessibilidade dos idosos no transporte coletivo urbano de Rio Claro - SP

This paper analyzes the accessibility of the elderly population in relation to urban transportation in the city of Rio Claro - SP. After a study of the physiology, infrastructure, history and legislation of the city, there were collected and analyzed data obtained through semi-structured interviews with the elderly population that makes use of public transport with the aim of identifying the user's profile as well as their impressions and criticism of the service. The Department of Transport and Urban Mobility of Rio Claro provided general information related to public transport in the city. After all the survey, it can be seen that, although a significant portion of the elderly population make use of public transport, there are problems related to the structure of the city, which hinders the movement of buses, and the accessibility of the elderly, caused by physical characteristics of the vehicles, attitude of the motorists and aspects of public administration of the town. These data support the conclusion that there is often a disregard for the rights of the elderly and that it not only should as it can be corrected

Manejo da fertirrigação para melancia em função da condutividade elétrica da solução do solo

Pós-graduação em Agronomia (Horticultura) - FCA

Cobalt dotiertes ZnO als verdünnter magnetischer Halbleiter

Verdünnte magnetische Halbleiter (DMS) sind technologisch vielversprechende Materialien mit sowohl ferromagnetischen als auch halbleitenden Eigenschaften. Sie gehören zu den entscheidenden Verbindungen bei der Entwicklung neuartiger Spintronikanwendungen. Bisher scheiterte der technologische Einsatz jedoch daran, dass die Curie Temperatur der meisten magnetischen Halbleiter viel zu niedrig ist. Neue Verbindungen auf Basis von ZnO wie Zn1-xCoxO sollen jedoch Ferromagnetismus oberhalb von Raumtemperatur zeigen. Die theoretischen Grundlagen der magnetischen Wechselwirkungen sind jedoch nicht verstanden und erfordern daher umfangreiche experimentelle Untersuchungen. Im Rahmen dieser Arbeit wurden dünne Filme aus Zn0.95Co0.05O mittels Laserablation hergestellt und bezüglich ihrer magnetischen, elektrischen und strukturellen Eigenschaften untersucht, mit dem Ziel den Ferromagnetismus in diesem Material besser zu verstehen. Dabei kamen verschiedene experimentelle Methoden zum Einsatz: wie Magnetometrie, Röntgendiffraktometrie, Magnetischer Röntgenzirkulardichroismus (XMCD), Elektronenspinresonanz sowie magnetoelektrische Transportmessungen. Bei entsprechend defektfördernden Herstellungsbedingungen zeigen die Proben klare ferromagnetische Eigenschaften oberhalb von Raumtemperatur mit einer Sättigungsmagnetisierung von ca. 2 Bohr Magneton / Co sowie einer Remanenz von bis zu 90%. Elektrische Transportmessungen zeigen zudem einen deutlichen Magnetowiderstand sowie einen anomalen Hall Effekt. Letzterer steigt mit der Probenmagnetisierung und spricht für intrinsischen Ferromagnetismus sowie eine geringe Spinpolarisation. Da der Ferromagnetismus mit höherer Ladungsträgerdichte jedoch verschwindet, ist eine ferromagnetische Wechselwirkung über die Leitungselektronen auszuschließen. Eine genauere Auswertung der magnetoelektrischen Messdaten deutet zudem auf ein leitendes Störstellenband hin, das unter Umständen selbst spinpolarisiert ist. Vieles spricht somit dafür, dass die ferromagnetische Ordnung über magnetische Polaronen zustande kommt. Einige strukturelle und magnetometrische Ergebnisse sowie Elektronenspinresonanzmessungen deuten zudem auf metallische Ausscheidungen in Form von Cobalt Clustern hin, die einen zusätzlichen extrinsischen ferromagnetischen Beitrag liefern, der deutlich größer sein könnte als der intrinsische. Überraschenderweise zeigen XMCD Messungen jedoch, dass Cobalt überhaupt nicht am Ferromagnetismus beteiligt ist. Insgesamt gibt es Anzeichen, dass magnetische Defekte eine entscheidende Rolle hinsichtlich des Magnetismus in Zn0.95Co0.05O spielen.

Implementación de efectos de audio en la tarjeta Raspberry Pi B+

Este proyecto consiste en el diseño e implementación de un procesador digital de efectos de audio en tiempo real orientado a instrumentos eléctricos tales como guitarras, bajos, teclados, etc. El procesador está basado en la tarjeta Raspberry Pi B+, ordenador de placa reducida de bajo coste, desarrollado en Reino unido y cuyo lanzamiento tuvo lugar en el año 2012. En primer lugar, ha sido necesario lograr que la tarjeta asuma la funcionalidad de un procesador de audio en tiempo real. Para ello se ha instalado un sistema operativo Linux orientado a Raspberry (Raspbian) y se ha hecho uso de Pure Data (Pd): lenguaje de programación gráfico que fue desarrollado en los años 90 por Miller Puckette con intención de ser enfocado a la creación de eventos multimedia y de música por computador. El papel que desempeña Pd es de capa intermedia entre el hardware y el software ya que se encarga de tomar bloques de N muestras del convertidor analógico/digital y encaminarlas a través del flujo de señal diseñado gráficamente. En segundo lugar, se han implementado diferentes efectos de audio de distintas características. Así pues, se encuentran efectos basados en retardos, filtros digitales y procesadores de dinámica. Concretamente, los efectos implementados son los siguientes: delay, flanger, vibrato, reverberador de Schroeder, filtros (paso bajo, paso alto y paso banda), ecualizador paramétrico y compresor y expansor de dinámica. Estos efectos han sido implementados en lenguaje C de acuerdo con la API de Pd. Con esto se ha conseguido obtener un objeto por cada efecto, el cual es “instanciado” en Pd pudiendo ejecutarlo en tiempo real. En este proyecto se expone la problemática que supone cada paso del diseño proponiendo soluciones válidas. Además se incluye una guía paso a paso para configurar la tarjeta y lograr realizar un bypass de señal y un efecto simple partiendo desde cero. ABSTRACT. This project involves the design and implementation of a digital real-time audio processor for electrical instruments (guitars, basses, keyboards, etc.). The processor is based on the Raspberry Pi B + card: low cost computer, developed in UK in 2012. First, it was necessary to make the cards assume the functionality of a real time audio processor. A Linux operating system called Raspberry (Raspbian) was installed. In this Project is used Pure Data (Pd): a graphical programming language developed in the 90s by Miller Puckette intending to be focused on creating multimedia and computer music events. The role of Pd is an intermediate layer between the hardware and the software. It is responsible for taking blocks of N samples of the analog/digital converter and route it through the signal flow. Secondly, it is necessary to implemented the different audio effects. There are delays based effects, digital filter and dynamics effects. Specifically, the implemented effects are: delay, flanger, vibrato, Schroeder reverb, filters (lowpass, highpass and bandpass), parametric equalizer and compressor and expander dynamics. These effects have been implemented in C language according to the Pd API. As a result, it has been obtained an object for each effect, which is instantiated in Pd. In this Project, the problems of every step are exposed with his corresponding solution. It is inlcuded a step-by-step guide to configure the card and achieve perform a bypass signal process and a simple effect.

Spin-detection in a quantum electromechanical shuttle system

We study the electrical transport of a harmonically bound, single-molecule C-60 shuttle operating in the Coulomb blockade regime, i.e. single electron shuttling. In particular, we examine the dependance of the tunnel current on an ultra-small stationary force exerted on the shuttle. As an example, we consider the force exerted on an endohedral N@C-60 by the magnetic field gradient generated by a nearby nanomagnet. We derive a Hamiltonian for the full shuttle system which includes the metallic contacts, the spatially dependent tunnel couplings to the shuttle, the electronic and motional degrees of freedom of the shuttle itself and a coupling of the shuttle's motion to a phonon bath. We analyse the resulting quantum master equation and find that, due to the exponential dependence of the tunnel probability on the shuttle-contact separation, the current is highly sensitive to very small forces. In particular, we predict that the spin state of the endohedral electrons of N@C-60 in a large magnetic gradient field can be distinguished from the resulting current signals within a few tens of nanoseconds. This effect could prove useful for the detection of the endohedral spin-state of individual paramagnetic molecules such as N@C-60 and P@C-60, or the detection of very small static forces acting on a C-60 shuttle.