Application of NMR RDC’s, relaxation and self-diffusion for the study of dynamic processes of small molecules in solution

Spin-lattice Relaxation, self-Diffusion coefficients and Residual Dipolar Couplings (RDC’s) are the basis of well established Nuclear Magnetic Resonance techniques for the physicochemical study of small molecules (typically organic compounds and natural products with MW < 1000 Da), as they proved to be a powerful and complementary source of information about structural dynamic processes in solution. The work developed in this thesis consists in the application of the earlier-mentioned NMR techniques to explore, analyze and systematize patterns of the molecular dynamic behavior of selected small molecules in particular experimental conditions. Two systems were chosen to investigate molecular dynamic behavior by these techniques: the dynamics of ion-pair formation and ion interaction in ionic liquids (IL) and the dynamics of molecular reorientation when molecules are placed in oriented phases (alignment media). The application of NMR spin-lattice relaxation and self-diffusion measurements was applied to study the rotational and translational molecular dynamics of the IL: 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]. The study of the cation-anion dynamics in neat and IL-water mixtures was systematically investigated by a combination of multinuclear NMR relaxation techniques with diffusion data (using by H1, C13 and F19 NMR spectroscopy). Spin-lattice relaxation time (T1), self-diffusion coefficients and nuclear Overhauser effect experiments were combined to determine the conditions that favor the formation of long lived [BMIM][BF4] ion-pairs in water. For this purpose and using the self-diffusion coefficients of cation and anion as a probe, different IL-water compositions were screened (from neat IL to infinite dilution) to find the conditions where both cation and anion present equal diffusion coefficients (8% water fraction at 25 ºC). This condition as well as the neat IL and the infinite dilution were then further studied by 13C NMR relaxation in order to determine correlation times (c) for the molecular reorientational motion using a mathematical iterative procedure and experimental data obtained in a temperature range between 273 and 353 K. The behavior of self-diffusion and relaxation data obtained in our experiments point at the combining parameters of molar fraction 8 % and temperature 298 K as the most favorable condition for the formation of long lived ion-pairs. When molecules are subjected to soft anisotropic motion by being placed in some special media, Residual Dipolar Couplings (RDCs), can be measured, because of the partial alignment induced by this media. RDCs are emerging as a powerful routine tool employed in conformational analysis, as it complements and even outperforms the approaches based on the classical NMR NOE or J3 couplings. In this work, three different alignment media have been characterized and evaluated in terms of integrity using 2H and 1H 1D-NMR spectroscopy, namely the stretched and compressed gel PMMA, and the lyotropic liquid crystals CpCl/n-hexanol/brine and cromolyn/water. The influence that different media and degrees of alignment have on the dynamic properties of several molecules was explored. Different sized sugars were used and their self-diffusion was determined as well as conformation features using RDCs. The results obtained indicate that no influence is felt by the small molecules diffusion and conformational features studied within the alignment degree range studied, which was the 3, 5 and 6 % CpCl/n-hexanol/brine for diffusion, and 5 and 7.5 % CpCl/n-hexanol/brine for conformation. It was also possible to determine that the small molecules diffusion verified in the alignment media presented close values to the ones observed in water, reinforcing the idea of no conditioning of molecular properties in such media.

Botnet cluster identification

Botnets are a group of computers infected with a specific sub-set of a malware family and controlled by one individual, called botmaster. This kind of networks are used not only, but also for virtual extorsion, spam campaigns and identity theft. They implement different types of evasion techniques that make it harder for one to group and detect botnet traffic. This thesis introduces one methodology, called CONDENSER, that outputs clusters through a self-organizing map and that identify domain names generated by an unknown pseudo-random seed that is known by the botnet herder(s). Aditionally DNS Crawler is proposed, this system saves historic DNS data for fast-flux and double fastflux detection, and is used to identify live C&Cs IPs used by real botnets. A program, called CHEWER, was developed to automate the calculation of the SVM parameters and features that better perform against the available domain names associated with DGAs. CONDENSER and DNS Crawler were developed with scalability in mind so the detection of fast-flux and double fast-flux networks become faster. We used a SVM for the DGA classififer, selecting a total of 11 attributes and achieving a Precision of 77,9% and a F-Measure of 83,2%. The feature selection method identified the 3 most significant attributes of the total set of attributes. For clustering, a Self-Organizing Map was used on a total of 81 attributes. The conclusions of this thesis were accepted in Botconf through a submited article. Botconf is known conferênce for research, mitigation and discovery of botnets tailled for the industry, where is presented current work and research. This conference is known for having security and anti-virus companies, law enforcement agencies and researchers.

Premature thelarche: identification of clinical and laboratory data for the diagnosis of precocious puberty

PURPOSE: Two groups of girls with premature breast development were studied retrospectively. We tried to identify clinical, radiological, and hormonal parameters that could distinguish between a benign, nonprogressive premature thelarche and a true precocious puberty. METHODS: The clinical outcome of 88 girls with breast enlargement before 6.1 years of age was analyzed. Taking into account the progression of their sexual maturation, we allocated the children into 2 groups: "Isolated Premature Thelarche" (n = 63) and "Precocious Puberty" (n = 25) groups. Chronological and bone ages, height and growth velocity centiles, computerized tomography of hypothalamus-pituitary area, pelvic ultrasonography, gonadotropin response to luteinizing hormone-releasing hormone stimulation as well as basal levels of luteinizing hormone, follicle-stimulating hormone, estradiol, and prolactin were studied in both groups. Statistical analysis were performed using the Student t test to compare the sample means. Fisher's exact test and chi² test were used to analyze the nonparametric variables. RESULTS: Isolated premature thelarche most frequently affected girls younger than 2 years who presented exaggerated follicle-stimulating hormone response to luteinizing hormone-releasing hormone stimulation test. The precocious puberty group had higher initial stature, accelerated growth rate and bone age, increased uterine and ovarian volumes, high spontaneous luteinizing hormone levels by immunofluorimetric assay, as well as a high luteinizing hormone response and peak luteinizing hormone/follicle-stimulating hormone ratio after luteinizing hormone-releasing hormone stimulation. CONCLUSION: At initial presentation, girls who undergo true precocious puberty present advanced bone age, increased uterine and ovarian volumes in addition to breast enlargement, as well as an luteinizing hormone-predominant response after a luteinizing hormone-releasing hormone stimulation test.

Dynamic range prediction for an electric vehicle

Electric Vehicles (EVs) have limited energy storage capacity and the maximum autonomy range is strongly dependent of the driver's behaviour. Due to the fact of that batteries cannot be recharged quickly during a journey, it is essential that a precise range prediction is available to the driver of the EV. With this information, it is possible to check if the desirable destination is achievable without a stop to charge the batteries, or even, if to reach the destination it is necessary to perform an optimized driving (e.g., cutting the air-conditioning, among others EV parameters). The outcome of this research work is the development of an Electric Vehicle Assistant (EVA). This is an application for mobile devices that will help users to take efficient decisions about route planning, charging management and energy efficiency. Therefore, it will contribute to foster EVs adoption as a new paradigm in the transportation sector.

Detection of road accident accumulation zones with a visual analytics approach

Nowadays, road accidents are a major public health problem, which increase is forecasted if road safety is not treated properly, dying about 1.2 million people every year around the globe. In 2012, Portugal recorded 573 fatalities in road accidents, on site, revealing the largest decreasing of the European Union for 2011, along with Denmark. Beyond the impact caused by fatalities, it was calculated that the economic and social costs of road accidents weighted about 1.17% of the Portuguese gross domestic product in 2010. Visual Analytics allows the combination of data analysis techniques with interactive visualizations, which facilitates the process of knowledge discovery in sets of large and complex data, while the Geovisual Analytics facilitates the exploration of space-time data through maps with different variables and parameters that are under analysis. In Portugal, the identification of road accident accumulation zones, in this work named black spots, has been restricted to annual fixed windows. In this work, it is presented a dynamic approach based on Visual Analytics techniques that is able to identify the displacement of black spots on sliding windows of 12 months. Moreover, with the use of different parameterizations in the formula usually used to detect black spots, it is possible to identify zones that are almost becoming black spots. Through the proposed visualizations, the study and identification of countermeasures to this social and economic problem can gain new grounds and thus the decision- making process is supported and improved.

Experimental and numerical approaches for structural assessment in new footbridge designs (SFRSCC–GFPR hybrid structure)

Within the civil engineering field, the use of the Finite Element Method has acquired a significant importance, since numerical simulations have been employed in a broad field, which encloses the design, analysis and prediction of the structural behaviour of constructions and infrastructures. Nevertheless, these mathematical simulations can only be useful if all the mechanical properties of the materials, boundary conditions and damages are properly modelled. Therefore, it is required not only experimental data (static and/or dynamic tests) to provide references parameters, but also robust calibration methods able to model damage or other special structural conditions. The present paper addresses the model calibration of a footbridge bridge tested with static loads and ambient vibrations. Damage assessment was also carried out based on a hybrid numerical procedure, which combines discrete damage functions with sets of piecewise linear damage functions. Results from the model calibration shows that the model reproduces with good accuracy the experimental behaviour of the bridge.

Survey and dynamic behaviour of the Our Lady of Conception Church, Portugal

The Our Lady of Conception church is located in village of Monforte (Portugal) and is not in use nowadays. The church presents structural damage and, consequently, a study was carried out. The study involved the survey of the damage, dynamic identification tests under ambient vibration and the numerical analysis. The church is constituted by the central nave, the chancel, the sacristy and the corridor to access the pulpit. The masonry walls present different thickness, namely 0.65 m in the chancel, 0.70 m in the sacristy, 0.92 in the central nave and 0.65 m in the corridor. The masonry walls present 8 buttresses with different dimensions. The total longitudinal and transversal dimensions of the church are equal to 21.10 m and 14.26 m, respectively. The survey of the damage showed that, in general, the masonry walls are in good conditions, with exception of the transversal walls of the nave, which present severe cracks. The arches of the vault presents also severe cracks along the central nave. As consequence, the infiltrations have increased the degradation of the vault and paintings. Furthermore, the foundations present settlements in the Southwest direction. The dynamic identification test were carried out under the action of ambient excitation of the wind and using 12 piezoelectric accelerometers of high sensitivity. The dynamic identification tests allowed to estimate the dynamic properties of the church, namely frequencies, mode shapes and damping ratios. A FEM numerical model was prepared and calibrated, based on the first four experimental modes estimated in the dynamic identification tests. The average error between the experimental and numerical frequencies of the first four modes is equal to 5%. After calibration of the numerical model, pushover analyses with a load pattern proportional to the mass, in the transversal and longitudinal direction of the church, were performed. The results of the analysis numerical allow to conclude that the most vulnerable direction of the church is in the transversal one and the maximum load factor is equal to 0.35.

A spectrum-driven damage Identification technique : application and validation through the numerical simulation of the Z24 Bridge

The present paper focuses on a damage identification method based on the use of the second order spectral properties of the nodal response processes. The explicit dependence on the frequency content of the outputs power spectral densities makes them suitable for damage detection and localization. The well-known case study of the Z24 Bridge in Switzerland is chosen to apply and further investigate this technique with the aim of validating its reliability. Numerical simulations of the dynamic response of the structure subjected to different types of excitation are carried out to assess the variability of the spectrum-driven method with respect to both type and position of the excitation sources. The simulated data obtained from random vibrations, impulse, ramp and shaking forces, allowed to build the power spectrum matrix from which the main eigenparameters of reference and damage scenarios are extracted. Afterwards, complex eigenvectors and real eigenvalues are properly weighed and combined and a damage index based on the difference between spectral modes is computed to pinpoint the damage. Finally, a group of vibration-based damage identification methods are selected from the literature to compare the results obtained and to evaluate the performance of the spectral index.

Tunnel engineering – influence of the type and the quantity of measurements in the back analysis of geomechanical parameters

The monitoring data collected during tunnel excavation can be used in inverse analysis procedures in order to identify more realistic geomechanical parameters that can increase the knowledge about the interested formations. These more realistic parameters can be used in real time to adapt the project to the real structure in situ behaviour. However, monitoring plans are normally designed for safety assessment and not especially for the purpose of inverse analysis. In fact, there is a lack of knowledge about what types and quantity of measurements are needed to succeed in identifying the parameters of interest. Also, the optimisation algorithm chosen for the identification procedure may be important for this matter. In this work, this problem is addressed using a theoretical case with which a thorough parametric study was carried out using two optimisation algorithms based on different calculation paradigms, namely a conventional gradient-based algorithm and an evolution strategy algorithm. Calculations were carried for different sets of parameters to identify several combinations of types and amount of monitoring data. The results clearly show the high importance of the available monitoring data and the chosen algorithm for the success rate of the inverse analysis process.

Evaluating balance, stability and gait symmetry of stroke patients using kinematic and dynamic gait lab data

Dissertação de mestrado integrado em Engenharia Biomédica

Parameter identification of the fermentative production of fructo-oligosaccharides by Aureobasidium pullulans

In this study, a mathematical model for the production of Fructo-oligosaccharides (FOS) by Aureobasidium pullulans is developed. This model contains a relatively large set of unknown parameters, and the identification problem is analyzed using simulation data, as well as experimental data. Batch experiments were not sufficiently informative to uniquely estimate all the unknown parameters, thus, additional experiments have to be achieved in fed-batch mode to supplement the missing information. © 2015 IEEE.

DINAMICA MICROBIANA Y CALIDAD DE LA MATERIA ORGANICA DEL SUELO COMO INDICADORES DE SUSTENTABILIDAD EN EL CHACO ARIDO DE LA PROVINCIA DE CORDOBA Microbial dynamic and organic matter quality as indicators of soil sustainability in Dry Chaco of Córdoba Province

Se propone analizar el efecto del uso productivo en el Chaco Árido de la provincia de Córdoba, mediante la aplicación de indicadores de sustentabilidad relacionados con la calidad de la materia orgánica y la liberación de nutrientes en el suelo, con la finalidad de aportar a un tema de suma interes para la provincia de Córdoba como es la formulación de criterios y pautas de manejo para la implementación de la Ley de Bosques (N° 26331). Se trabajará en la localidad de San Miguel en el departamento Pocho, en un sitio de bosque no disturbado y en tres sistemas productivos: desmonte selectivo con implantación de pasturas; desmonte total con agricultura bajo riego y desmonte total sobrepastoreado. En cada sitio se medirá “in situ” la emisión de CO2 y se tomaran muestras de suelo a las que se les determinará: a) contenido de materia orgánica total (MO), b) contenido de sustancias húmicas (SH), diferenciando ácidos húmicos (AH) y fúlvicos (AF), c) abundancia y actividad de microorganismos nitrificadores y d) propiedades químicas de los AH y AF. Se calcularán los siguientes índices de sustentabilidad a) materia orgánica biodisponible (MOB=MO–SH); b) índice de humificación (IH=SH/MO); c) tipo de humus (TH=AF/AH; d) índice de mineralización de C (IMC=CO2/MO); e) índice de nitrificación (IN=actividad/abundancia); y f) índice de estabilidad de las fracciones humificadas: compuestos aromáticos/ alifáticos. Los datos serán analizados estadísticamente mediante ANOVA y comparación de medias por LSD (P<0.05) y tests multivariados. We proposed analyze the effect of land use in Arid Chaco of Cordoba province, using sustainability indicators related to organic matter quality and nutrient release in soil, with the aim to formulate management criteria for the implementation of the Ley de Bosques (N° 26331) in Córdoba province. The study will be conducted in San Miguel village in Pocho department, in one undisturbed forest site and three productive systems: selective clearing with grass sowing; total clearing with irrigation agriculture and total clearing with overgrazed. In each site "in situ" CO2 emission will be measured and soil samples will be taken, in which the following parameters will be determined: a) total organic matter content (MO), b) humic substances content (SH), in humic acids (AH) and fulvic acids (AF), c) abundance and activity of nitrifier microorganisms and d) chemical properties of AH and AF. The sustainability indexes will be calculated: biodisponible organic matter (MOB=MO–SH); b) humification index (IH=SH/MO); c) humus type (TH=AF/AH; d) C mineralization index (IMC=CO2/MO); e) nitrifying index (IN=activity/abundance); and f) humic fractions stability index: aromatic/aliphatic compounds. The data will be statistically analyzed by ANOVA and the means will be compared by LSD (P<0.05) and multivariate tests.

Functional and histopathological identification of the respiratory failure in a DMSXL transgenic mouse model of myotonic dystrophy.

Acute and chronic respiratory failure is one of the major and potentially life-threatening features in individuals with myotonic dystrophy type 1 (DM1). Despite several clinical demonstrations showing respiratory problems in DM1 patients, the mechanisms are still not completely understood. This study was designed to investigate whether the DMSXL transgenic mouse model for DM1 exhibits respiratory disorders and, if so, to identify the pathological changes underlying these respiratory problems. Using pressure plethysmography, we assessed the breathing function in control mice and DMSXL mice generated after large expansions of the CTG repeat in successive generations of DM1 transgenic mice. Statistical analysis of breathing function measurements revealed a significant decrease in the most relevant respiratory parameters in DMSXL mice, indicating impaired respiratory function. Histological and morphometric analysis showed pathological changes in diaphragmatic muscle of DMSXL mice, characterized by an increase in the percentage of type I muscle fibers, the presence of central nuclei, partial denervation of end-plates (EPs) and a significant reduction in their size, shape complexity and density of acetylcholine receptors, all of which reflect a possible breakdown in communication between the diaphragmatic muscles fibers and the nerve terminals. Diaphragm muscle abnormalities were accompanied by an accumulation of mutant DMPK RNA foci in muscle fiber nuclei. Moreover, in DMSXL mice, the unmyelinated phrenic afferents are significantly lower. Also in these mice, significant neuronopathy was not detected in either cervical phrenic motor neurons or brainstem respiratory neurons. Because EPs are involved in the transmission of action potentials and the unmyelinated phrenic afferents exert a modulating influence on the respiratory drive, the pathological alterations affecting these structures might underlie the respiratory impairment detected in DMSXL mice. Understanding mechanisms of respiratory deficiency should guide pharmaceutical and clinical research towards better therapy for the respiratory deficits associated with DM1.

From creative ideas to new emerging ventures: the process of identification and exploitation among finnish design entrepreneurs

This study focuses on identification and exploitation processes among Finnish design entrepreneurs (i.e. selfemployed industrial designers). More specifically, this study strives to find out what design entrepreneurs do when they create new ventures, how venture ideas are identified and how entrepreneurial processes are organized to identify and exploit such venture ideas in the given industrial context. Indeed, what does educated and creative individuals do when they decide to create new ventures, where do the venture ideas originally come from, and moreover, how are venture ideas identified and developed into viable business concepts that are introduced on the markets? From an academic perspective: there is a need to increase our understanding of the interaction between the identification and exploitation of emerging ventures, in this and other empirical contexts. Rather than assuming that venture ideas are constant in time, this study examines how emerging ideas are adjusted to enable exploitation in dynamic market settings. It builds on the insights from previous entrepreneurship process research. The interpretations from the theoretical discussion build on the assumption that the subprocesses of identification and exploitation interact, and moreover, they are closely entwined with each other (e.g. McKelvie & Wiklund, 2004, Davidsson, 2005). This explanation challenges the common assumption that entrepreneurs would first identify venture ideas and then exploit them (e.g. Shane, 2003). The assumption is that exploitation influences identification, just as identification influences exploitation. Based on interviews with design entrepreneurs and external actors (e.g. potential customers, suppliers and collaborators), it appears as identification and exploitation of venture ideas are carried out in close interaction between a number of actors, rather than alone by entrepreneurs. Due to their available resources, design entrepreneurs have a desire to focus on identification related activities and to find external actors that take care of exploitation related activities. The involvement of external actors may have a direct impact on decisionmaking and various activities along the processes of identification and exploitation, which is something that previous research does not particularly emphasize. For instance, Bhave (1994) suggests both operative and strategic feedback from the market, but does not explain how external parties are actually involved in the decisionmaking, and in carrying out various activities along the entrepreneurial process.

Dynamic of population-dynamics in a medically important snail species Lymnaea (Radix) Luteola (Lamarck)

The life-cycle parameters of the snail Lymnaea (Radix) luteola and the factors influencing the same have been studied under laboratory conditions. Ins each month, from July 1990 to June 1991, a batch of 100 zero-day old individual were considered for studies. The snails of April batch survived for 19.42 days while those in December batch survived for 87.45 days. The May batch individual though survived for 65.67 days gained maximum shell size (15.84 mm in length) and body weight (419.87 mg). All individuals of April batch died prior to attainment of sexual maturity. In the remaining 11 batches the snails became sexually mature between 32 and 53 days. At this stage, they were with varying shell lengths, 9.3 mm to 13,11 mm in respect to batches. The reproduction period varied from 1-67 days. An individual laid, on an average, 0,25 (March batch) to 443.67 (May batch) eggs in its life-span. A batch of such snails would leave 24312, 22520, 720268, 80408, 76067, 418165, 214, 9202, 0, 0, 2459386 and 127894 individuals at the end of 352nd day. Since the environmental conditions were almost similar the 'dynamic' of population dynamics seems to be involved with the 'strain' of the snail individuals of the batches concerned.