From polymer precursors to metal oxides

We report on a strategy to prepare metal oxides including binary oxide and mixed metal oxide (MMO) in form of nanometer-sized particles using polymer as precursor. Zinc oxide nanoparticles are prepared as an example. The obtained zinc polyacrylate precursor is amorphous as confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The conversion from polymer precursor to ZnO nanocrystals by thermal pyrolysis was investigated by means of XRD, thermogravimetric analysis (TGA) and electron microscopy. The as-synthesized ZnO consists of many individual particles with a diameter around 40 nm as shown by scanning electron microscopy (SEM). The photoluminescence (PL) and electron paramagnetic (EPR) properties of the material are investigated, too. Employing this method, ZnO nanocrystalline films are fabricated via pyrolysis of a zinc polyacrylate precursor film on solid substrate like silicon and quartz glass. The results of XRD, absorption spectra as well as TEM prove that both the ZnO nanopowder and film undergo same evolution process. Comparing the PL properties of films fabricated in different gas atmosphere, it is assigned that the blue emission of the ZnO films is due to crystal defect of zinc vacancy and green emission from oxygen vacancy. Two kinds of ZnO-based mixed metal oxide (Zn1-xMgxO and Zn1-xCoxO) particles with very precise stoichiometry are prepared by controlled pyrolysis of the corresponding polymer precursor at 550 oC. The MMO crystal particles are typically 20-50 nm in diameter. Doping of Mg in ZnO lattice causes shrinkage of lattice parameter c, while it remains unchanged with Co incorporation. Effects of bandgap engineering are seen in the Mg:ZnO system. The photoluminescence in the visible is enhanced by incorporation of magnesium on zinc lattice sites, while the emission is suppressed in the Co:ZnO system. Magnetic property of cobalt doped-ZnO is checked too and ferromagnetic ordering was not found in our samples. An alternative way to prepare zinc oxide nanoparticles is presented upon calcination of zinc-loaded polymer precursors, which is synthesized via inverse miniemulsion polymerization of the mixture of the acrylic acid and zinc nitrate. The as-prepared ZnO product is compared with that obtained from polymer-salt complex method. The obtained ZnO nanoparticles undergo surface modification via a phosphate modifier applying ultrasonication. The morphology of the modified particles is checked by SEM. And stability of the ZnO nanoparticles in aqueous dispersion is enhanced as indicated by the zeta-potential results.

Multidimensional analysis of complex networks

Complex Networks analysis turn out to be a very promising field of research, testified by many research projects and works that span different fields. Those analysis have been usually focused on characterize a single aspect of the system and a study that considers many informative axes along with a network evolve is lacking. We propose a new multidimensional analysis that is able to inspect networks in the two most important dimensions, space and time. To achieve this goal, we studied them singularly and investigated how the variation of the constituting parameters drives changes to the network as a whole. By focusing on space dimension, we characterized spatial alteration in terms of abstraction levels. We proposed a novel algorithm that, by applying a fuzziness function, can reconstruct networks under different level of details. We verified that statistical indicators depend strongly on the granularity with which a system is described and on the class of networks. We keep fixed the space axes and we isolated the dynamics behind networks evolution process. We detected new instincts that trigger social networks utilization and spread the adoption of novel communities. We formalized this enhanced social network evolution by adopting special nodes (called sirens) that, thanks to their ability to attract new links, were able to construct efficient connection patterns. We simulated the dynamics of the system by considering three well-known growth models. Applying this framework to real and synthetic networks, we showed that the sirens, even when used for a limited time span, effectively shrink the time needed to get a network in mature state. In order to provide a concrete context of our findings, we formalized the cost of setting up such enhancement and provided the best combinations of system's parameters, such as number of sirens, time span of utilization and attractiveness.

Habibi. Proposta di traduzione di un romanzo young adult

This dissertation intends to present and analyse the translation from English into Italian of the first twenty-five chapters of Habibi, a teenager and young adult’s novel written by the Palestinian-American author Naomi Shihab Nye. It has been necessary to present the theoretical approach to the literary translation studies, in order to focus the attention on the translation problems and provide suitable solutions and strategies. The first chapter gives an historical perspective on children’s literature from the end of the Nineteenth century till today, distinguishing the Italian and the American contexts. The description of the evolution process of this literary genre, which developed to satisfy the needs of the educational system, is its central issue. At the end of the chapter, we outline the main traits characterizing children’s literature and the image of the ideal reader. The second chapter provides an overview on Palestinian literature, especially on the features of the contemporary novel and the Diaspora literature. Afterwards, we present the author Naomi Shihab Nye and the book Habibi. In the third chapter we analyze the novel, focusing the attention on the rhythm of the narration, on the linguistic registers and the textual peculiarities found during the reading stage, according to the features of the children’s literature. The fourth chapter consists of the translation of the first twenty-five chapters of the novel. The fifth chapter begins with a section about the translation theory, the literary translation studies, focusing on the translation of children’s literature. Finally, there is the translation analysis. Here we present the strategies and the choices of the translation process, along with some practical examples with reference to theoretical studies. Special attention is paid to culture-specific items, lexicon and syntax.The source text can be found in appendix.

Hydrogen embrittlement risk of high strength galvanized steel in contact with alkaline media

The critical conditions for hydrogenembrittlement (HE) risk of highstrengthgalvanizedsteel (HSGS) wires and tendons exposed to alkaline concrete pore solutions have been evaluated by means of electrochemical and mechanical testing. There is a relationship between the hydrogenembrittlementrisk in HSGS and the length of hydrogen evolution process in alkalinemedia. The galvanizedsteel suffers anodic dissolution simultaneously to the hydrogen evolution which does not stop until the passivation process is completed. HSGS wires exposed to a very highalkalinemedia have showed HE risk with loss in mechanical properties only if long periods with hydrogen evolution process take place with a simultaneous intensive galvanized coating reduction.

Caracterización multivariada de los temporales para su aplicación en el dimensionamiento del manto principal

En esta tesis se presenta una metodología para la caracterización del oleaje, dentro del marco de las nuevas Recomendaciones para Obras Marítimas (ROM 0.0.-00 y ROM 1.0-09), por ser una de las principales acciones que afectan a la estabilidad de las estructuras marítimas. Debido al carácter aleatorio intrínsecamente multivariado de la acción considerada, las tormentas, su caracterización paramétrica se realiza en términos de funciones cópula uniparamétricas. Las variables consideradas son altura de ola significante del pico de la tormenta, el periodo medio asociado y la magnitud, o número de olas, de todo el ciclo de solicitación. Para establecer un patrón teórico de evolución de la tormenta que permita extrapolar las muestras fuera de la región con datos se analizan los modelos teóricos existentes, comprobándose que no reproducen adecuadamente las tormentas constituidas por estados de mar con un peso importante de oleaje swell. Para evitar esta limitación se proponen cuatro modelos teóricos de evolución de tormentas con distintas formas geométricas. El análisis de los modelos existentes y los propuestos pone de relieve que el Modelo Magnitud Equivalente de Tormenta (EMS= Equivalent Magnitude Storm) con la forma triangular es el que mejor adapta las tormentas constituidas por estados de mar típicos del viento. Para tormentas con un mayor grado de desarrollo, el modelo teórico de tormenta EMS con la forma trapezoidal es el adecuado. De las aproximaciones propuestas para establecer el periodo medio de los sucesivos estados de mar del ciclo de solicitación. la propuesta por Martín Soldevilla et al., (2009) es la más versátil y , en general , mejor reproduce la evolución de todo tipo de tormentas. La caracterización de las tormentas se complementa con la altura de ola máxima. Debido a la mayor disponibilidad y longitud temporal de los datos sintéticos frente a las registros, la práctica totalidad de los análisis de extremos se realizan con tormentas sintéticas en las que la distribución de olas individuales es desconocida. Para evitar esta limitación se utilizan modelos teóricos de distribución de olas acordes a las características de cada uno de los estados de mar que conforman la tormenta sintética. Para establecer dichas características se utiliza la curtosis y en función de su valor la altura de ola máxima se determina asumiendo una determinada distribución de olas. Para estados de mar lineales la distribución de olas individuales de Rayleigh es la considerada. Para condiciones no lineales de gran ancho de banda el modelo de distribución de olas propuesto por Dawson, (2004) es el utilizado y si es de banda estrecha las predicciones de (Boccotti, (1989), Boccotti et al., (2013)) se compara con las resultantes del modelo de Dawson. La caracterización de la evolución de las tormentas en términos multivariados es aplicada al estudio de la progresión del daño del manto principal de diques en talud, y al rebase de las olas. Ambos aspectos cubren el segundo objetivo de la tesis en el que se propone una nueva formulación para el dimensionamiento de mantos constituidos por bloques cúbicos de hormigón. Para el desarrollo de esta nueva formulación se han utilizado los resultados recogidos en los estudios de estabilidad del manto principal de diques talud realizados en modelo físico a escala reducida en el Centro de Estudios de Puertos y Costas (CEDEX) desde la década de los 80 empleando, en su mayoría, bloques paralelepípedos cúbicos de hormigón. Por este motivo y porque los últimos diques construidos en la costa Española utilizan este tipo de pieza, es por lo que la formulación planteada se centra en este tipo de pieza. Después de un primer análisis de las fórmulas de cálculo y de evolución existentes, se llega a la conclusión de que es necesario realizar un esfuerzo de investigación en este campo, así como ensayos en laboratorio y recogida de datos in-situ con base a desarrollar fórmulas de evolución de daño para mantos constituidos por piezas diferentes a la escollera, que tenga en cuenta las principales variables que condiciona su estabilidad. En esta parte de la tesis se propone un método de análisis de evolución de daño, que incluye el criterio de inicio de avería, adecuada para diques en talud constituidos por bloque cúbicos de hormigón y que considera la incidencia oblicua, el daño acumulado y el rebase. This thesis proposes a methodology to estimate sea waves, one of the main actions affecting the maritime structures stability, complying with (ROM 0.0.-00 & ROM 1.0-09.Due to the multivariate behavior of sea storms, the characterization of the structures of sea storms is done using copula function. The analyzed variables are the significant height wave, mean period and magnitude or number of waves during the storm history. The storm evolution in terms of the significant height wave and the mean period is also studied in other to analyze the progressive failure modes. The existing models of evolution are studied, verifying that these approximations do not adjust accurately for developed waves. To overcome this disadvantage, four evolution models are proposed, with some geometrical shapes associated to fit any development degree. The proposed Equivalent Magnitude Storm model, EMS, generally obtains the best results for any kind of storm (predominant sea, swell or both). The triangle is recommended for typical sea storms whereas the trapezoid shape is much more appropriate for more developed storm conditions.The Martín Soldevilla et al., (2009) approach to estimate the mean period is better than others approaches used.The storm characterization is completed with the maximum wave height of the whole storm history. Due to synthetic historical waves databases are more accessible and longer than recorded database, the extreme analyses are done with synthetic data. For this reason the individual waves’ distribution is not known. For that limitation to be avoided, and depending on the characteristics of every sea states, one theoretical model of waves is choose and used. The kurtosis parameter is used to distinguish between linear and nonlinear sea states. The Rayleigh model is used for the linear sea states. For the nonlinear sea states, Dawson, (2004) approach is used for non-narrow bandwidth storms, comparing the results with the Boccotti, (1989), Boccotti et al., (2013) approach, with is used for narrow bandwidth storms. The multivariate and storm evolution characterization is used to analyze of stone armour damage progression and wave overtopping discharge. Both aspects are included in the second part of the thesis, with a new formula is proposed to design cubes armour layer. The results the stability studies of armour layer, done in the Centre for Harbours and Coastal Studies (CEDEX) laboratory are used for defining a new stability formula. For this reason and because the last biggest breakwater built in Spain using the cube, the damage progression is analyze for this kind of concrete block. Before to analyze the existing formulae, it is concluded that it is necessary more investigation, more tests in laboratory and data gathering in situ to define damage evolution formulae to armour of other kind of pieces and that takes to account the principal variables. This thesis proposed a method to calculate the damage progression including oblique waves, accumulated damage, and overtopping effect. The method also takes account the beginning of the movement of the blocks.

El empoderamiento del alumnado desde el modelo sMOOC

Los MOOC han traído consigo multitud de oportunidades que aportar a un panorama educativo que se encuentra a falta de nuevos estímulos para fomentar una educación de calidad. Los sMOOC en particular, favorecen un mayor protagonismo del alumnado, tanto en el modelo comunicativo que desarrollan como en el pedagógico. Las redes sociales contribuyen a esta labor desempeñando un papel prioritario en el proceso de aprendizaje, al conectar a todos los agentes que participan, y brindarles oportunidades que les posibiliten ser escuchados y transformar la capa social. El empoderamiento del alumnado es clave en este proceso de evolución educativa, y desde el Proyecto ECO se ha potenciado esta propuesta, ofreciendo la posibilidad de crear tu propio sMOOC, en los que se hace patente el empoderamiento ciudadano invirtiendo el aula donde el alumnado pasa a ser eteacher.

Static Analysis of Usefulness States in Transition P Systems

Transition P Systems are a parallel and distributed computational model based on the notion of the cellular membrane structure. Each membrane determines a region that encloses a multiset of objects and evolution rules. Transition P Systems evolve through transitions between two consecutive configurations that are determined by the membrane structure and multisets present inside membranes. Moreover, transitions between two consecutive configurations are provided by an exhaustive non-deterministic and parallel application of evolution rules. But, to establish the rules to be applied, it is required the previous calculation of useful, applicable and active rules. Hence, computation of useful evolution rules is critical for the whole evolution process efficiency, because it is performed in parallel inside each membrane in every evolution step. This work defines usefulness states through an exhaustive analysis of the P system for every membrane and for every possible configuration of the membrane structure during the computation. Moreover, this analysis can be done in a static way; therefore membranes only have to check their usefulness states to obtain their set of useful rules during execution.

Influence of La-doping on phase transformation and photocatalytic properties of ZnTiO3 nanoparticles synthesized via modified sol-gel method

Non-doped and La-doped ZnTiO3 nanoparticles were successfully synthesized via a modified sol–gel method. The synthesized nanoparticles were structurally characterized by PXRD, UV-vis DRS, FT-IR, SEM-EDS, TEM, Raman and photoluminescence spectroscopy. The results show that doping of La into the framework of ZnTiO3 has a strong influence on the physico-chemical properties of the synthesized nanoparticles. XRD results clearly show that the non-doped ZnTiO3 exhibits a hexagonal phase at 800 °C, whereas the La-doped ZnTiO3 exhibits a cubic phase under similar experimental conditions. In spite of the fact that it has a large ionic radius, the La is efficiently involved in the evolution process by blocking the crystal growth and the cubic to hexagonal transformation in ZnTiO3. Interestingly the absorption edge of the La-doped ZnTiO3 nanoparticles shifted from the UV region to the visible region. The photocatalytic activity of the La-doped ZnTiO3 nanoparticles was evaluated for the degradation of Rhodamine B under sunlight irradiation. The optimum photocatalytic activity was obtained for 2 atom% La-doped ZnTiO3, which is much higher than that of the non-doped ZnTiO3 as well as commercial N-TiO2. A possible mechanism for the degradation of Rhodamine B over La-doped ZnTiO3 was also discussed by trapping experiments. More importantly, the reusability of these nanoparticles is high. Hence La-doped ZnTiO3 nanoparticles can be used as efficient photocatalysts for environmental applications.

Coevolução e as práticas isomórficas de gestão: um estudo sobre os processos de mudanças institucionais no Instituto Federal de Educação, Ciência e Tecnologia do RN

The Federal Institution for Education, Science and Technology, in its historical path, has been living different changes. The transformations occurred along the way have been determined by coercive forces from the institutional environment, which has became more and more broad and complex throughout the time, obtaining diverse characteristics and new elements such as non institutional factors1 which started to contribute with the other changes. In this context, this work aims to study the isomorphic practices of the managers in the institutional changes process of the IFRN in 1998 and 2008, as of a theoretical coevolutionary perspective (CHILD; RODRIGUES; LEWIN; CARROL; VOLBERDA, 2003). This theory brings a new point of view for the organization analysis to the organizational studies, since it offers a non deterministic and non linear lection of the evolution process, which means, a coevolution. Thus, the organizations and their institutional and non institutional environment auto evolve, auto organize and auto reproduce. Therefore, the institutional and non institutional factors of the macro environment keep a continuous interdependence relationship with the organizations. For the means of this study, it is important to understand that is impossible to comprehend the object, the isomorphic practices, without considering that the previous institutional changes and its evolutions, its continuations and discontinuations, important in the coevolution process. As such, to call upon the institutional historical track is a fundamental aspect to materialize this study, for the recursive movement is indeed present in the coevolution. Another important point to make this research effective is that it is not possible to abdicate from the hologramatic view2 of this study, which considers the object, the isomorphic practices, part of the whole and this whole is also in the parts, therefore it is impossible to comprehend the object of study outside the context where it belongs. With this, as of the objective previously proposed, it is necessary to describe the characteristics of coevolution of the institutional changes related in 1998 and 2008; analyze the dynamic of the isomorphic mechanisms in its respective institutional change process; and describe the lessons learned which the isomorphic practices left to the IFRN, regarding its benefits and difficulties. All these transformations happened through coercive forces3 of the institutional environment. As of the Nineties, these forces became stronger, the environment became broader and more complex, with the emergency of new environmental factors. This study proposed to study the managing process and its practices, related to the micro environment, although it is required to articulate these actions, the demands and requirements from the macro environment. To make this research effective, semi structured interviews have been conducted with the managers who participated in both institutional change processes. In the results analysis, it has been possible to verify the particularity of each change, the one from 1998 with a strong normative action of the managers against coercive forces from the government for the search of recognition and the institutional legitimation and the one in 2008, which has been characterized by the normative action by managers in agreement with the coercive forces from the government, in favor of the government policy for the technological professional education. However, the results analysis it is possible to notice the evidence of a belonging feeling from the interviewed managers

Para que servem hoje nossas cozinhas? :uma análise de uso das cozinhas do Plano 100 (Natal-RN)

This work investigates the using of kitchens of the apartments of PLANO 100 in Natal-RN, through one method s set of the functional and behavior evaluation. The theme was selected through of the emergence of the many questions that sought to understand what manners how individuals relates to the constructed space, what was the possible changes caused by these relation, also verifying how this space interferes in a daily life of theirs users. This research to search answers what to improve of the study s object and in futures production s architectonic too. The used approach combined an overview of new kinds of familiar arrangements and the evolution process of the brazilian s kitchens within social context of Brazil, with APO (Post-Occupation Evaluation), techniques through a physical space survey, questionnaires and interviews with users. Beyond to APO s implements were applied behavior setting s techniques too, what presented the most knowledge about to satisfactions levels pointed by the users

Monitoramento e identificação numérico e experimental de danos em vigas e pontes de aço e concreto utilizando transformadas de wavelet

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.

Estudo experimental e numérico de juntas adesivas em T com aderentes de alumínio

Nos dias de hoje, a ligação adesiva de estruturas complexas que não poderiam ou não seriam tão fáceis de ser fabricadas numa só peça é cada vez mais usual. As juntas adesivas têm vindo a substituir muitos outros métodos de ligação, como por exemplo ligações aparafusadas, rebitas ou soldadas, devido às vantagens de facilidade na sua fabricação, resistência superior e capacidade de unir materiais diferentes. Por esta razão as juntas adesivas têm vindo a ser aplicadas cada vez mais em várias industrias como aeroespacial, aeronáutica, automóvel, naval e calçado. O tipo de adesivo a usar em determinada aplicação é principalmente escolhido consoante as suas características mecânicas e o tipo de resposta pretendida às solicitações impostas. Como exemplo de adesivo resistente e frágil existe o Araldite® AV138. Por outro lado, o adesivo Araldite® 2015 é menos resistente, mas apresenta maior ductilidade e flexibilidade. Além dos adesivos Araldite® comerciais, existem adesivos de poliuretano que combinam características de elevada resistência com características de grande ductilidade e flexibilidade, como por exemplo o Sikaforce® 7752. Esta dissertação tem como objetivo estudar experimentalmente e numericamente, através de modelos de dano coesivo (MDC), o comportamento de diferentes configurações de junta em T quando sujeitas a solicitações de arrancamento. Consideram-se os adesivos anteriormente mencionados para testar as juntas sob diferentes tipos de adesivos. A junta em T é constituída por 2 aderentes em L de alumínio e um aderente base também em alumínio, unidos por uma camada de adesivo. Experimentalmente é feito um estudo da resistência da junta com a variação da espessura dos aderentes em L (tP2). Com a análise numérica são estudadas as distribuições de tensões, evolução do dano, modos de rotura e resistência. Além disso, realizou-se um estudo numérico da existência ou não de adesivo de preenchimento na zona da curvatura dos aderentes em L nas tensões e na resistência da junta. Mostrouse que a variação da geometria nos aderentes em L, a presença de adesivo de preenchimento e o tipo de adesivo têm uma influência direta na resistência de junta. Os ensaios experimentais validaram os resultados numéricos e permitiram concluir que os MDC são uma técnica precisa para o estudo das geometrias das juntas em T.

Proces prekaryzacji pracy - nowe kierunki zmian społeczno-gospodarczych w świecie

Wydział Nauk Politycznych i Dziennikarstwa

Coevolução e as práticas isomórficas de gestão: um estudo sobre os processos de mudanças institucionais no Instituto Federal de Educação, Ciência e Tecnologia do RN

The Federal Institution for Education, Science and Technology, in its historical path, has been living different changes. The transformations occurred along the way have been determined by coercive forces from the institutional environment, which has became more and more broad and complex throughout the time, obtaining diverse characteristics and new elements such as non institutional factors1 which started to contribute with the other changes. In this context, this work aims to study the isomorphic practices of the managers in the institutional changes process of the IFRN in 1998 and 2008, as of a theoretical coevolutionary perspective (CHILD; RODRIGUES; LEWIN; CARROL; VOLBERDA, 2003). This theory brings a new point of view for the organization analysis to the organizational studies, since it offers a non deterministic and non linear lection of the evolution process, which means, a coevolution. Thus, the organizations and their institutional and non institutional environment auto evolve, auto organize and auto reproduce. Therefore, the institutional and non institutional factors of the macro environment keep a continuous interdependence relationship with the organizations. For the means of this study, it is important to understand that is impossible to comprehend the object, the isomorphic practices, without considering that the previous institutional changes and its evolutions, its continuations and discontinuations, important in the coevolution process. As such, to call upon the institutional historical track is a fundamental aspect to materialize this study, for the recursive movement is indeed present in the coevolution. Another important point to make this research effective is that it is not possible to abdicate from the hologramatic view2 of this study, which considers the object, the isomorphic practices, part of the whole and this whole is also in the parts, therefore it is impossible to comprehend the object of study outside the context where it belongs. With this, as of the objective previously proposed, it is necessary to describe the characteristics of coevolution of the institutional changes related in 1998 and 2008; analyze the dynamic of the isomorphic mechanisms in its respective institutional change process; and describe the lessons learned which the isomorphic practices left to the IFRN, regarding its benefits and difficulties. All these transformations happened through coercive forces3 of the institutional environment. As of the Nineties, these forces became stronger, the environment became broader and more complex, with the emergency of new environmental factors. This study proposed to study the managing process and its practices, related to the micro environment, although it is required to articulate these actions, the demands and requirements from the macro environment. To make this research effective, semi structured interviews have been conducted with the managers who participated in both institutional change processes. In the results analysis, it has been possible to verify the particularity of each change, the one from 1998 with a strong normative action of the managers against coercive forces from the government for the search of recognition and the institutional legitimation and the one in 2008, which has been characterized by the normative action by managers in agreement with the coercive forces from the government, in favor of the government policy for the technological professional education. However, the results analysis it is possible to notice the evidence of a belonging feeling from the interviewed managers

A Phylogenetic Classification of the Video-Game Industry’s Business Model Ecosystem

Part 8: Business Strategies Alignment