Numerical study of driven flows of shear thinning viscoelastic fluids in rectangular cavities

In this work, we present a numerical study of flow of shear thinning viscoelastic fluids in rectangular lid driven cavities for a wide range of aspect ratios (depth to width ratio) varying from 1/16 to 4. In particular, the effect of elasticity, inertia, model parameters and polymer concentration on flow features in rectangular driven cavity has been studied for two shear thinning viscoelastic fluids, namely, Giesekus and linear PTT. We perform numerical simulations using the symmetric square root representation of the conformation tensor to stabilize the numerical scheme against the high Weissenberg number problem. The variation in flow structures associated with merging and splitting of elongated vortices in shallow cavities and coalescence of corner eddies to yield a second primary vortex in deep cavities with respect to the variation in flow parameters is discussed. We discuss the effect of the dominant eigenvalues and the corresponding eigenvectors on the location of the primary eddy in the cavity. We also demonstrate, by performing numerical simulations for shallow and deep cavities, that where the Deborah number (based on convective time scale) characterizes the elastic behaviour of the fluid in deep cavities, Weissenberg number (based on shear rate) should be used for shallow cavities. (C) 2016 Elsevier B.V. All rights reserved.

Experimental Investigations on Interaction of Two Drops by Thermocapillary-Buoyancy Migration

Experiments were performed, in a terrestrial environment, to study the migration and interaction of two drops with different diameters in matrix liquid under temperature gradient field. Pure soybean oil and silicon oil were used as matrix liquid and the drop liquid, respectively. The information on the motions of two drops was recorded by CCD camera system in the experiments to analyze the trajectories and velocities of the drops. Our experiments showed that, upon two drops approaching each other, the influence of the larger drop on the motion of the smaller one became significant. Meanwhile the smaller drop had a little influence on the larger one all the time. The oscillation of migration velocities of both drops was observed as they were approaching. For a short period the smaller drop even moved backward when it became side by side with the larger one during the migration. Although our experimental results on the behavior of two drops are basically consistent with the theoretical predictions, there are also apparent differences. 2006 Elsevier Ltd. All rights reserved. Keywords: Thermocapillary migration; Drop; Interaction; Oscillation 1. Introduction A bubble or drop will move when placed in another fluid with temperature gradient. This motion happens as a consequence of the variation of interfacial tension with temperature. Such a phenomenon is already known as Marangoni migration problem. With the development of microgravity science, bubble dynamics and droplet dynamics became a hot point problem of research because this investigation is very important for basic research as well as for applications in reduced gravity environment, such as space material science, chemical engineering and so on. Young et al. first investigated the thermocapillary migration of

Damage development in an armor ceramic under quasi-static indentation

The objective of the present study is to assess the capabilities of a recently developed mechanism-based model for inelastic deformation and damage in structural ceramics. In addition to conventional lattice plasticity, the model accounts for microcrack growth and coalescence as well as granular flow following comminution. The assessment is made through a coupled experimental/computational study of the indentation response of a commercial armor ceramic. The experiments include examinations of subsurface damage zones along with measurements of residual surface profiles and residual near-surface stresses. Extensive finite element computations are conducted in parallel. Comparisons between experiment and simulation indicate that the most discriminating metric in the assessment is the spatial extent of subsurface damage following indentation. Residual stresses provide additional validation. In contrast, surface profiles of indents are dictated largely by lattice plasticity and thus provide minimal additional insight into the inelastic deformation resulting from microcracking or granular flow. A satisfactory level of correlation is obtained using property values that are either measured directly or estimated from physically based arguments, without undue reliance on adjustable (nonphysical) parameters. © 2011 The American Ceramic Society.

Investigation Of Mode Ii Crack Growth Following A Very High Speed Impact

A recoverable plate impact testing technology has been developed for studying fracture mechanisms of mode II crack. With this technology, a single duration stress pulse with submicrosecond duration and high loading rates, up to 10(8) MPam(1/2)s(-1), can be produced. Dynamic failure tests of Hard-C 60# steel were carried out under asymmetrical impacting conditions with short stress-pulse loading. Experimental results show that the nucleation and growth of several microcracks ahead of the crack tip, and the interactions between them, induce unsteady crack growth. Failure mode transitions during crack growth, both from mode I crack to mode II and from brittle to ductile fracture, were observed. Based on experimental observations, a discontinuous crack growth model was established. Analysis of the crack growth mechanisms using our model shows that the shear crack extension is unsteady when the extending speed is between the Rayleigh wave speed c(R) and the shear wave speed c(S). However, when the crack advancing speed is beyond c(S), the crack grows at a steady intersonic speed approaching root 2c(S). It also shows that the transient mechanisms, such as nucleation, growth, interaction and coalescence among microcracks, make the main crack speed jump from subsonic to intersonic and the steady growth of all the subcracks causes the main crack to grow at a stable intersonic speed.

Microstructure of shear localization in low-carbon ferrite pearlite steel

A study has been made of the microstructure of the thermally assisted band in a low carbon ferrite-pearlite steel, resulting from high speed torsional testing with an average strain rate of about 1500 s−1. Metallographic examination showed that there are several fine shear bands distributed over a deformed region (the gauge length of the specimen). The width of these bands is estimated to be of the order of magnitude of 50 μm, and the spacing between them is roughly about 100 μm. Detailed scanning electron microscopy studies indicate that damage of the microstructure within the band is very apparent, as evidenced by microcrack initiation and coalescence along the shear deformation band. However, there is no evidence that the material in the band had become microcrystalline or non-crystalline.

Influence of secondary void damage in the matrix material around voids

The mechanism of ductile damage caused by secondary void damage in the matrix around primary voids is studied by large strain, finite element analysis. A cylinder embedding an initially spherical void, a plane stress cell with a circular void and plane strain cell with a cylindrical or a flat void are analysed under different loading conditions. Secondary voids of smaller scale size nucleate in the strain hardening matrix, according to the requirements of some stress/strain criteria. Their growth and coalescence, handled by the empty element technique, demonstrate distinct mechanisms of damage as circumstances change. The macroscopic stress-strain curves are decomposed and illustrated in the form of the deviatoric and the volumetric parts. Concerning the stress response and the void growth prediction, comparisons are made between the present numerical results and those of previous authors. It is shown that loading condition, void growth history and void shape effect incorporated with the interaction between two generations of voids should be accounted for besides the void volume fraction.

The tensile fracture of mild steel

The fibrous and cleavage tensile fracture of an annealed mild steel was investigated. Round tensile specimens of two geometries, one straight and one with a circumferential notch, were pulled at temperatures between room temperature and liquid nitrogen temperature. Tensile fractures occurred at average strains from 0.02 to 0.87. The mechanism of fibrous fracture at room temperature was investigated metallographically. The stress-strain values at which fibrous and cleavage fractures are initiated were determined.

Many fine microcracks, which are associated with pearlite colonies and inclusion stringers, develop prior to fibrous fracture. The macrofracture, which leads to final separation of the tensile specimen, is initiated by the propagation of a microcrack beyond the microstructural feature with which it is associated. Thus, the fibrous fracture of mild steel does not develop by the gradual growth and coalescence of voids that are large enough to be visible in the optical microscope. When the microcracks begin to open and propagate, final fracture quickly follows. Axial cracks are a prominent feature of the macrofracture that forms in the interior of the specimen immediately before final fracture.

The Bridgman distribution of stresses is not valid in a notched tensile specimen. Fibrous and cleavage fractures occur at approximately the same value of maximum tensile stress. When the maximum tensile stress that is necessary for cleavage fracture is plotted against the corresponding maximum tensile strain, the result is an unique locus.

Gestão do trabalho na Estratégia Saúde da Família em municípios do Estado do Rio de Janeiro com mais de 500 mil habitantes: o caso do Rio de Janeiro e Duque de Caxias

Não obstante ao aumento do número de equipes de Saúde da Família no território brasileiro há disparidade na implantação da Estratégia Saúde da Família (ESF) em municípios de grande porte. Outras dificuldades enfrentadas referem-se aos recursos humanos em saúde (RHS). Nesse sentido, esta pesquisa objetivou analisar o cenário atual da gestão do trabalho na ESF nos municípios do Rio de Janeiro e Duque de Caxias. Metodologia: Estudo exploratório, de investigação narrativa, bibliográfica e documental, de abordagem qualitativa. A coleta de dados se deu em duas fases: pesquisa de material bibliográfico nas bases: LILACS, PAHO e WHOLIS, e de editais de processos seletivos e concursos públicos dos anos 2000, com vistas à contratação de profissionais de saúde para a ESF e; entrevistas semiestruturadas com gestores da ESF. O período de coleta perdurou entre agosto de 2010 e dezembro de 2011. Os documentos foram analisados à luz da estatística descritiva e as entrevistas submetidas à análise de conteúdo. Resultados: Escassez de literatura sobre a ESF nos municípios de Duque de Caxias e Rio de Janeiro. As contratações no Rio de Janeiro obedeceram a dois momentos: prefeitura e Organizações Sociais (OS) como contratantes. Em Duque de Caxias a contratação foi exclusividade da Prefeitura. No Rio de Janeiro os salários dos profissionais variaram entre R$ 728,59 (Agentes Comunitários de Saúde - ACS) e R$ 7.773,69 (médicos), contrastando com a isonomia salarial adotada em Duque de Caxias, com vencimentos ao redor de R$ 700,00 para os ACS, R$ 800,00 para nível técnico e; aproximadamente R$ 5.000,00 aos profissionais de nível superior. Os gestores sugerem que a maior rotatividade entre os médicos é motivada por carga horária excessiva; más condições de trabalho e, localização da unidade em áreas de risco social. As estratégias para atração e fixação profissional incluem: processos seletivos; garantia dos direitos trabalhistas e; abonos salariais, no caso do Rio de Janeiro e; flexibilização de carga horária, melhorias em infraestrutura e estratégias de qualificação, em Duque de Caxias. Entrevistas revelaram as maiores dificuldades na gestão da ESF: alta rotatividade, formação médica destoante com o SUS e, infraestrutura precária. Acrescenta-se o baixo salário para médicos em Duque de Caxias e, vínculos e salários distintos entre profissionais que exercem mesma função no Rio de Janeiro. Conclusões: A expansão da ESF nos grandes centros urbanos encontra obstáculos relacionados à gestão do trabalho que fragilizam sua consolidação. O Rio de Janeiro mostra-se mais atraente para os profissionais da ESF. O único diferencial de Duque de Caxias, sobretudo para odontólogos e enfermeiros, refere-se à contratação direta pela Prefeitura com vinculação estatutária, ainda que, eventual aumento salarial esteja atrelado ao de todos os servidores municipais. No Rio de Janeiro, a contratação sob regime da Consolidação das Leis do Trabalho revela-se uma proteção, posto que diante da possibilidade de perda de profissionais as OS elevam seus salários. Dentre as recomendações para fixação profissional incluem-se: incentivos salariais para atuação em regiões vulneráveis, melhorias em infraestrutura e, acoplação entre Instituições de Ensino Superior e rede de saúde.

Structure-change-dependent transmittance of PtOx thin film in super-resolution near-field structure: Diffraction effect analysis

To study working mechanism of super-resolution near-field structure (super-RENS) optical disk from a far-field optics view is very necessary because of the actual far-field writing/readout process in the optical disk system. A Gaussian diffraction model based on Fresnel-Kirchhoff diffraction theory of PtOx-type super-RENS has been set up in this Letter. The relationship between micro-structural deformation (change of bubble structure and refractive index profile) with far-field optical response of PtOx thin film has been studied with it in detail. The simulation results are in good agreement with the experimental results reported in literatures with a designed configuration. These results may provide more quantitative information for better understanding of the working mechanism of metal-oxide-type super-RENS. (c) 2007 Elsevier B.V. All rights reserved.

Study on readout durability of super-RENS disk

Characteristics essential for the readout durability of a superresolution near-field structure (super-RENS) disk are studied experimentally by using a home-built optical measuring setup and atomic force microscope, based on a simplified PtOx super-RENS disk. The experimental results show that for a super-RENS disk with constant structure and materials, readout signals including transmittance and reflectance vary with changes in bubble shape and size, indicating that the readout durability of the disk has a strong dependence on bubble stability, which is closely related to the thickness of the cover layer, the recording power and readout power, and the mechanical properties of the dielectric layer. Based on our experimental results, the main direction for improving readout durability is also proposed. (c) 2008 Optical Society of America.

O resseguro no Direito Internacional

O estudo descreve o resseguro no âmbito do Direito Internacional, partindo da constatação da pulverização dos riscos através do mercado global para abordar temas relevantes, tais como: a diferenciação entre resseguro internacional e contrato internacional de resseguro, os usos e costumes internacionalmente aceitos e a autonomia da vontade das partes como fundamento aos contratos de resseguro. São perquiridas também as fontes do direito ressecuritário no âmbito internacional. As relações jurídicas entre Estado e resseguradores e as relações contratuais entre seguradores e resseguradores devem ser regidos pela máxima boa-fé. Essa abordagem reporta-se a princípios consagrados no Direito Internacional do Investimento como padrão de referência para a regulação da atividade ressecuritária e como limite à intervenção dos Estados Descreve-se ainda o resseguro no Brasil, traçando um histórico evolutivo do monopólio à abertura do mercado e constatando algumas iniciativas nacionais do uso do seguro e do resseguro como ferramenta de atração e proteção de investimentos.

A Review of the South Pacific Tuna Baitfisheries: Small Pelagic Fisheries Associated with Coral-Reefs

A review is given of current information concerning small pelagic fishes exploited for tuna bait in the South Pacific. These fishes are usually caught over or near coral reefs using light attraction and lift nets. The most common and widespread species are anchovies (Engraulidae), sprats (Clupeidae), silversides (Atherinidae), and herrings (Clupeidae). Recorded yields ranged from 0.5 to 2.6t/km2, and methods are described to estimate potential yields empirically in the absence of catch data. Environmental effects on small pelagic fish production are discussed, and evidence is presented to suggest that rainfall markedly affects stolephorid anchovy production. Some species of small pelagic fish, such as Selar spp., Decapterus spp., and Herklotsichthys sp., have been fished traditionally by artisanal fishermen, but anchovy and sprat stocks were probably unexploited prior to pole-and-line tuna fishing in the South Pacific.

Evidence of print gap airflow affecting web printing quality

The current study extends our earlier investigation on the real-time dynamics of print gap airflow around a single jetted drop over a moving substrate. In the present work, simulated web press printing was performed using a stationary grey-scale commercial inkjet print head to print full-width block of solid colour images onto a paper substrate with extended print gaps. The resultant printed images exhibit patterns or 'wood-graining' effects which become more prevalent as the relevant Reynolds number (Re) increases. The high-resolution scans of the printed images revealed that the patterns are created by oscillation and coalescence of neighboring printed tracks across the web. The phenomenon could be a result of drop stream perturbations caused by unsteady print gap airflow of the type similar to that observed in the previous study. ©2013; Society for Imaging Science and Technology.

The growth morphologies of GaN layer on Si(111) substrate

The growth morphologies of metalorganic chemical vapor deposition (MOCVD) grown GaN layer on Si(111) substrate were studied using atomic force microscopy and transmission electron microscopy. It was found that the growth process of GaN/Si(111) consisted of two cycles of island growth and coalescence. These two cycles process differs markedly from that of one cycle process reported. The stress of evolving GaN layers on Si(111) was characterized by measuring the lattice constant c of GaN using X-ray diffraction (XRD) technique. It was proposed that the large tensile stress within the film during growth initiated this second island growth cycle, and the interaction between the GaN islands with high orientational fluctuation on the buffer layer induced this large tensile growth stress when coalescence occurred. (C) 2002 Elsevier Science B.V. All rights reserved.

复杂微通道中的液滴控制(英文)

<正>The problem of controlling the droplet motions in multiphase flows on the microscale has gained increasing attention.It is critical to understand the relevant physics on droplet hydrodynamics and thus control the generation,motion,splitting,and coalescence of droplets in